Professional Documents
Culture Documents
ISOupdate August 2019
ISOupdate August 2019
ISOupdate August 2019
Supplement to ISOfocus
August 2019
International Standards in process
ISO 1726- Road vehicles — Mechanical couplings
3:2010/CD between tractors and semi-trailers — Part 3:
An International Standard is the result of an agreement between Amd 1 Requirements for semi-trailer contact area to
the member bodies of ISO. A first important step towards an Interna- fifth wheel — Amendment 1
tional Standard takes the form of a committee draft (CD) - this is cir- ISO/CD Road vehicles — Fully automatic coupling sys-
culated for study within an ISO technical committee. When consensus 13044-2 tems 24 V (FACS) for heavy commercial vehicle
has been reached within the technical committee, the document is combinations — Part 2: 50 mm fifth wheel
sent to the Central Secretariat for processing as a draft International couplings — Electrical and pneumatic interface
Standard (DIS). The DIS requires approval by at least 75 % of the
TC 31 Tyres, rims and valves
member bodies casting a vote. A confirmation vote is subsequently
carried out on a final draft International Standard (FDIS), the approval ISO/CD 4250-3 Earth-mover tyres and rims — Part 3: Rims
criteria remaining the same.
TC 33 Refractories
ISO/CD 23071 Refractory products — Determination of re-
duced species in carbon containing refractories
by XRD
TC 34 Food products
ISO/CD 24081 Ground cassava leaves (isombe)
— Specification
ISO/CD Safety and control devices for gas burners and ISO/CD TS Geographic information — BIM to GIS concep-
23551-11 gas-burning appliances — Particular require- 19166 tual mapping (B2GM)
ments — Part 11: Automatic shut-off valves for TC 215 Health informatics
operating pressure greater than 500 kPa
ISO/DTR Health informatics — Whole genome sequence
TC 164 Mechanical testing of metals 21394 markup language (WGML)
ISO/CD Metallic materials — Instrumented indentation TC 221 Geosynthetics
14577-5 test for hardness and materials parameters —
Part 5: Part 5: Linear elastic dynamic instru- ISO/CD Geosynthetics — Determination of compres-
mented indentation testing (DIIT) 25619-1 sion behaviour — Part 1: Compressive creep
properties
TC 172 Optics and photonics
TC 224 Service activities relating to drinking
water supply, wastewater and storm-
water systems
1
delayed publication of language version TC 20 Aircraft and space vehicles
2
corrected version
ISO en Space systems — Programme man-
3
multilingual document
10795:2019 agement and quality — Vocabulary
F
Price
ISO en Space systems — Space debris
group
24113:2019 mitigation requirements
C
TC 2 Fasteners
ISO 3269:2019 en Fasteners — Acceptance inspection ISO en Space systems — Disposal of satel-
fr 26872:2019 lites operating at geosynchronous
B altitude F
ISO 4034:2012 fr2 Hexagon regular nuts (style 1) — TC 21 Equipment for fire protection
Product grade C and fire fighting
A
ISO en Fire extinguishing media — Foam
7203-1:2019 concentrates — Part 1: Specification
TC 5 Ferrous metal pipes and metal- for low-expansion foam concentrates F
lic fittings for top application to water-immisci-
ble liquids
ISO en Life cycle analysis and recycling
21053:2019 fr of ductile iron pipes for water ISO en Fire extinguishing media — Foam
applications C 7203-2:2019 concentrates — Part 2: Specifica-
tion for medium- and high-expansion F
foam concentrates for top application
TC 6 Paper, board and pulps to water-immiscible liquids
ISO 1762:2019 en Paper, board, pulps and cellulose
ISO en Fire extinguishing media — Foam
fr nanomaterials — Determination of
7203-3:2019 concentrates — Part 3: Specification
residue (ash content) on ignition at B
for low-expansion foam concentrates F
525 °C
for top application to water-miscible
ISO en Paper, board, pulps and cellulose liquids
12830:2019 fr nanomaterials — Determination of
ISO en Gaseous fire-extinguishing sys-
acid-soluble magnesium, calcium, D
14520-5:2019 tems — Physical properties and
manganese, iron, copper, sodium and
system design — Part 5: FK-5-1-12 B
potassium
extinguishant
TC 8 Ships and marine technology ISO en Gaseous fire-extinguishing sys-
ISO en Ships and marine technology — 14520-8:2019 tems — Physical properties and
21593:2019 Technical requirements for dry- system design — Part 8: HFC 125 B
disconnect/connect couplings for C extinguishant
bunkering liquefied natural gas ISO en Gaseous fire-extinguishing sys-
ISO en Ships and marine technology — Mar- 14520-9:2019 tems — Physical properties and
15738:2019 itime safety — Gas inflation systems system design — Part 9: HFC 227ea B
for inflatable life-saving appliances C extinguishant
ISO en Gaseous fire-extinguishing sys-
ISO en Ships and marine technology — Ser- 14520-10:2019 tems — Physical properties and
19912:2019 vicing of immersion suits, anti-expo- system design — Part 10: HFC 23 B
sure suits and constant wear suits B extinguishant
TC 22 Road vehicles
ISO 9089:2019 en Marine structures — Mobile offshore
ISO en Road vehicles — Connection
units — Mooring positioning wind-
19072-1:2019 interface for pyrotechnic devices,
lasses and winches B
two-way and three-way connections B
— Part 1: Pocket interface definition
ISO en Ships and marine technology — Ma-
ISO en Diesel engines — NOx reduction
25862:2019 rine magnetic compasses, binnacles
22241-4:2019 agent AUS 32 — Part 4: Refilling
and azimuth reading devices F
interface C
TC 25 Cast irons and pig irons ISO en Microbiology of the food chain
17410:2019 fr — Horizontal method for the
ISO 185:2019 en Grey cast irons — Classification enumeration of psychrotrophic B
microorganisms
D
TC 35 Paints and varnishes
TC 27 Solid mineral fuels ISO 2808:2019 en Paints and varnishes — Determina-
fr tion of film thickness
ISO 925:2019 en Solid mineral fuels — Determination F
of carbonate carbon content —
Gravimetric method B
ISO en Paints and varnishes — Determina-
22518:2019 tion of solvents in water-thinnable
TC 28 Petroleum and related prod- coating materials — Gas-chromato- B
ucts, fuels and lubricants from graphic method
natural or synthetic sources ISO en Paints and varnishes — Scratch test
ISO 3924:2019 en Petroleum products — Determination 22557:2019 using a spring-loaded pen
of boiling range distribution — Gas C
chromatography method F
ISO en Paints and varnishes — Determina-
ISO en Petroleum products — Determination 22969:2019 tion of solar reflectance
21493:2019 of turbidity point and aniline point C
equivalent B
ISO en Determination of pH value — Refer-
TC 29 Small tools 23496:2019 ence buffer solutions for the calibra-
tion of pH measuring equipment C
ISO/TS 13399- fr1 Cutting tool data representation and
310:2017 exchange — Part 310: Creation and
exchange of 3D models — Turning E ISO en Determination of pH value — Techni-
tools with carbide tips 23497:2019 cal buffer solutions for the calibration
of technical measuring installations B
ISO/TS 13399- fr1 Cutting tool data representation and
311:2016 exchange — Part 311: Creation and
exchange of 3D models — Solid D ISO/TR en Preparation of steel substrates before
reamers 22770:2019 application of paints and related
products — Analytical colorimetry B
ISO/TS 13399- fr1 Cutting tool data representation and
method to support visual assessment
312:2016 exchange — Part 312: Creation and
of surface preparation grades
exchange of 3D models — Reamers F
for indexable inserts TC 36 Cinematography
ISO/TS 13399- fr1 Cutting tool data representation and ISO 4241:2019 en Cinematography — Projection film
314:2018 exchange — Part 314: Creation and leader (time-based), trailer and cue
exchange of 3D models — Cartridges D marks — Specifications B
for indexable inserts
ISO en Adhesives — Test methods for ISO en Test methods for fibre-reinforced
22631:2019 fr adhesives for floor and wall coverings 21914:2019 cementitious composites — Bending
— Peel test B moment — Curvature curve by four- B
point bending test
ISO en Adhesives — Test methods for TC 79 Light metals and their alloys
22632:2019 fr adhesives for floor and wall coverings
— Shear test B ISO en Magnesium and magnesium alloys —
20260:2019 Determination of mercury
B
ISO en Adhesives — Test methods for
22633:2019 fr adhesives for floor coverings and wall
coverings — Determination of the B TC 83 Sports and other recreational
dimensional changes of a linoleum facilities and equipment
floor covering in contact with an ISO 20957- fr1 Stationary training equipment —
adhesive 9:2016/Amd Part 9: Elliptical trainers, additional
ISO en Adhesives — Test methods for 1:2019 specific safety requirements and test XZ
22635:2019 fr adhesives for plastic or rubber floor methods — Amendment 1
coverings or wall coverings — De- B TC 85 Nuclear energy, nuclear
termination of dimensional changes
technologies, and radiological
after accelerated ageing
protection
ISO en Adhesives — Test of adhesive for
22637:2019 fr floor covering — Determination of the ISO fr1 Dosimetry for exposures to cosmic
electrical resistance of adhesive films A 20785-4:2019 radiation in civilian aircraft — Part 4:
and composites Validation of codes B
TC 122 Packaging
TC 138 Plastics pipes, fittings and
ISO en Packaging — Accessible design —
valves for the transport of
22015:2019 Handling and manipulation
D fluids
ISO 9624:2019 en Thermoplastics piping systems for
fluids under pressure — Flange
TC 123 Plain bearings
adapters and loose backing flanges D
ISO en Foil bearings — Performance testing — Mating dimensions
13939:2019 fr of foil journal bearings — Testing of
ISO 7685:2019 en Glass-reinforced thermosetting plas-
static load capacity, friction coeffi- C
tics (GRP) pipes — Determination of
cient and lifetime
initial ring stiffness B
TC 126 Tobacco and tobacco products
ISO en Cigarettes — Determination of car- ISO en Industrial valves — Ball valves of
8454:2007/ fr bon monoxide in the vapour phase of 16135:2006/ fr thermoplastics materials — Amend-
Amd 2:2019 cigarette smoke — NDIR method — XZ Amd 1:2019 ment 1 XZ
Amendment 2
ISO en Cigarettes — Determination of water ISO en Industrial valves — Butterfly valves of
10362-1:2019 fr in total particulate matter from the 16136:2006/ fr thermoplastics materials — Amend-
mainstream smoke — Part 1: Gas- B Amd 1:2019 ment 1 XZ
chromatographic method
Meeting calendar
The meeting calendar is available at
https://www.iso.org/meeting-calendar.html