Professional Documents
Culture Documents
Chrome Moly/Alloy Steel Valves F11/F22/F5/F9: Description
Chrome Moly/Alloy Steel Valves F11/F22/F5/F9: Description
Description
Chrome moly alloy is lightweight but strong, (similar to AISI 4130). With the additions of molybdenum and chromium, chrome moly alloy offers exceptional
weldability along with oxidation and scaling resistance.
Design Features
Resistant to scaling and oxidation
Harden through heat treatment
Excellent weldability
Strong and tough
Excellent ductility
Applications
Pressure piping
Pressure vessels
Welded tubing applications
*Not prolonged usage above 425ºC F1, 470ºC WC1, 595ºC F11
1 of 3 11/20/2014 10:16 AM
Chrome Moly Valve Material F5 F11 F22 F9 C5 WC6 WC9 C12 http://www.globalsupplyline.com.au/F11_F22_F5_C5_WC6_WC9_Va...
COPPER MAX - - - -
COLUMBIUM MAX - - - -
VANDIUM MAX - - - -
TENSILE STRENGTH PSI (MPA) 70,000 (485) 75,000 (515) 70,000 (485) 85,000 (585)
YIELD STRENGTH PSI MIN 40,000 (275) 45,000 (310) 40,000 (275) 55,000 (380)
ELONGATION 2” % MIN 20 20 20 20
REDUCTION AREA % MIN 30 30 35 40
HARDNESS (HB) MAX* 143 ~ 207 156 ~ 207 143 ~ 217 179 ~ 217
The percentage (%) shown on the elements is the maximum, except where ranges are indicated.
† ASTM A182/A182M-13
*NACE MR01-75 specifies 237 maximum brinell hardness
Applications
COMMON API
TRIM # FOR
THIS BASE
FORGING MATERIAL WROUGHT BAR MATERIAL
COMMON DESIGNATION SERVICE RECOMMENDATIONS
SPECIFICATION SUFFIX SPECIFICATION 900
150 TO TO
600 # 2500
#
Non-corrosive applications
Including water, oil and gases at 8 5/5A
ASTM A217 A182 F1
A182 F1 C-1/2 Mo Low Alloy Steel temperatures between: -29 ~ 8A 12
Grade WC1 Class 1
593ºC* (Not prolonged use > 12/12A 16
470ºC).
Non-corrosive applications
8 5/5A
0.75% Ni; Mo; 0.75% Cr ASTM A217 including water, oil and gases at
A182 F2 A182 F2 8A 12
Low Alloy Steel Grade WC5 temperatures F2:-29ºC ~ 538ºC,
12/12A 16
WC5: -29ºC ~ 575ºC
Non-corrosive applications
8 5/5A
1 1/4% Chrome; 1/2% Moly ASTM A217 A182 F11 including water, oil and gases at
A182 F11 8A 12
Low Alloy Steel Grade WC6 Class 2 temperatures between -30ºC
12/12A 16
(-20ºF) and +593ºC (+1100ºF).
Non-corrosive applications
8 5/5A
2 1/4% Chrome Low Alloy ASTM A217 A182 F22 including water, oil and gases at
A182 F22 8A 12
Steel Grade WC9 Class 3 temperatures between -30ºC
12/12A 16
(-20ºF) and +593ºC (+1100ºF).
Mild corrosive or erosive
applications as well as 8 5/5A
5% Chrome; 1/2% Moly, ASTM A217
A182 F5/F5a A182 F5/F5a non-corrosive applications at 8A 12
Medium Alloy Steel Grade C 5
temperatures between -30ºC 12/12A 16
(-20ºF) and +650ºC (+1200ºF).
Mild corrosive or erosive
applications as well as 8 5/5A
9% Chrome; 1% Moly, ASTM A217
A182 F9 A182 F9 non-corrosive applications at 8A 12
Medium Alloy Steel Grade C12
temperatures between -30ºC 12/12A 16
(-20ºF) and +650ºC (+1200ºF).
Mild corrosive or erosive
applications as well as 8 5/5A
9% Chrome; 1% Moly; V-N, ASTM A217
A182 F91 A182 F91 non-corrosive applications at 8A 12
Medium Alloy Steel Grade C12-A
temperatures between -30ºC 12/12A 16
(-20ºF) and +650ºC (+1200ºF).
* Not for prolonged use over 470ºC
2 of 3 11/20/2014 10:16 AM
Chrome Moly Valve Material F5 F11 F22 F9 C5 WC6 WC9 C12 http://www.globalsupplyline.com.au/F11_F22_F5_C5_WC6_WC9_Va...
Home | Sit e Map | Terms & Conditions | Copyright & Liability | Warranty |© 2011 Global Supply Line Pty Ltd | A delaide Webs ite Design
3 of 3 11/20/2014 10:16 AM