Professional Documents
Culture Documents
General Shop Tools: Machine Tools 14-1 Air Compressors 14-11 Tool Storage 14-12 Miscellaneous 14-12
General Shop Tools: Machine Tools 14-1 Air Compressors 14-11 Tool Storage 14-12 Miscellaneous 14-12
General Shop Tools: Machine Tools 14-1 Air Compressors 14-11 Tool Storage 14-12 Miscellaneous 14-12
Home
Search
General Shop Tools
Fans
Bench Grinder
Warranty: Six Months Heaters
ail
Capacity (steel) 13 mm (1⁄2 in)
• Designed for instant speed selection from 400 to 5000 RPM
— rts Av Drills to center 381 mm (15 in)
• Heavier, oversized components with a 76.2 mm (3 in) column
for less column deflection, more head support, and greater
ed
u ir Pa
Quill diameter
Spindle travel
57 mm (21⁄4 in)
152.4 mm (6 in)
quill rigidity
in
t pa Spindle speeds —
• #2 NT external spindle standard
• Table raiser standard o
c e/Ren vari-speed with 1725 RPM motor 400 to 5000
i s
D ervic
Column diameter
Table
76.2 mm (3 in)
Standard
Warranty 2 Year on machine
Part No. HP
3⁄
Phase S
Voltage Weight
1 Year on electric
ID: C41245T1
Machine Tools
Fans
Fans
Air Circulators with Choice of Mountings
Heaters Warranty: Six Months
Tool Storage
Miscellaneous
ID: C44130T1
Blade Head
Part No. Volts/Hz Speed Dia. Dimensions Cord Plug RPM Amp HP Guards
9U-5620 115V - 50/60 Hz Single 76.2 cm 84 x 38 cm SJT 18GA 4.6 m Grounded 1100 2.6 1⁄ Steel/
4
(30 in) (33 in x 15 in) (15 ft) PVC Coated
9U-5621 230V - 50 Hz Single 76.2 cm 84 x 38 cm SJT 18GA 4.6 m Grounded 1100 1.2 1⁄ Steel/
4
(30 in) (33 in x 15 in) (15 ft) PVC Coated
Mounting Options
Item Part No. Description
1 9U-5656 Pedestal 47.6 mm (17⁄8 inch) steel tubing x 1.2 m (4 ft) long; bright zinc plate finish; mount length —
1.4 m (41⁄2 ft) closed, 2.1 m (7 ft) extended
2 9U-5657 Base 6.6 cm (26 inch) diameter; 11 kg (24 lbs); 10 Ga. steel with three vinyl feet to prevent slippage
Fans
Oil Fired Portable Heater
Warranty: Six Months Heaters
European Union compliant, CE marked (143-1320) Cat Part No. 143-1320
Output (Btu’s/hr.) 350,000 Coolant Reclaiming Stills
• Designed to warm your space faster and more evenly than radiant type area heaters Electrical 220V 50 Hz
• High capacity fan pulls cool air in and delivers forced air heating. Single phase Cylinder Head
• Specially designed burner heads on oil heater assure cleaner, more thorough burning. Motor thermal protector Yes Reclaiming
• Always use heater in a properly ventilated area in accordance with the operator’s Approx. hours operation/filling 12
manual included with each unit. Transport wheels Std. Air Compressors
Hot air flow 38 m3/min
(1,350 CFM)
Tool Storage
To determine the right size heater: Automatic shut-off Yes
• Determine the cubic feet of the area you will heat. Heated area1 2476 m3
• Use the formula: length x width x height. For example, 8.5 x 7.6 x 3 m = 193.8 m3 (87,500 ft3) Miscellaneous
(28 ft x 25 ft x 10 ft = 7,000 ft3) Thermostat Std.
• Next, decide the typical heat rise you’ll require. For example, if the room temperature, Net weight 82 kg (180 lb)
unheated, drops to 9.44°C (15 °F) and you want it heated to 21.11°C (70°F), the heat Shipping weight 109 kg (240 lb)
rise requirement is [70°F (21.11°C minus 15° (9.44°C)] 55°F (12.78°C). 1 Approximate cubic feet based on 30° temperature rise
• Then use this formula: (Sample numbers inserted) 7,000 ft3 (193.8 m3 x 0.133
(constant) x 55°F (12.78°C) (temperature rise) = 51,205 Btu per hour required).
Machine Tools
Coolant Reclaiming Stills
Fans
Coolant Reclaiming Antifreeze Additive
Heaters SMCS Code: 0708, 1352
Model: All Engines/Machines with Cooling Systems
Warranty: Six Months
Coolant Reclaiming Stills
• Used to recycle antifreeze NOTE: Caterpillar approves recycled antifreeze if reclaimed by vacuum
Cylinder Head • When antifreeze additive is added, finished distillation and reinhibited with Caterpillar® Antifreeze Additive. It must
Reclaiming antifreeze meets GM 6038-M low silicate meet GM 6038-M low silicate antifreeze specification for new antifreeze.
antifreeze specification (required if antifreeze 30% ethylene glycol is the minimum recommended antifreeze solution.
Air Compressors is used in Caterpillar products). This is required in order to maintain the correct lubricity for proper water
pump operation.
Tool Storage
Optional Parts (Sold Separately) Antifreeze Additive
Part No. Size
Miscellaneous 4C-7342 Air Operated Diaphragm Pump, 1:1 Husky 4C-9290 18.9 L (5 gal); mix as needed
• Recommended for faster transfer of antifreeze to reclaiming still
• Grinds auto, truck and tractor rocker • Specially formulated to be used with valve face grinding machines
arm quickly and accurately • Size: 2 liters
• For 9U-5360, 9U-5374, • Use with 9U-5360, 9U-5374, 9U-5375 and 9U-5376
9U-5375, 9U-5376,
9U-5377, 9U-5378, 9U-5379
and 9U-5380 Valve Face
Grinding Machines
ID: C41386T1
Size
Part No. Diameter Thickness Hole For Valve Type: Grit Shape Used On Coolant Reclaiming Stills
9U-5361 101.6 mm (4 in) 12.7 mm (1⁄2 in ) 15.87 mm (5⁄8 in) Stellite Only 80 Offset 2075
Cylinder Head
9U-5362 101.6 mm (4 in) 12.7 mm (1⁄2 in) 15.87 mm (5⁄8 in) Automotive 60 Offset 2075
Reclaiming
9U-5363 101.6 mm (4 in) 25.4 mm (1 in) 15.87 mm (5⁄8 in) Valve Ends 54 Cup 9U-5360
9U-5364 101.6 mm (4 in) 12.7 mm (1⁄2 in) 15.87 mm (5⁄8 in) Stellite 60 Offset 2075 Air Compressors
9U-5365 178 mm (7 in) 17.46 mm (11⁄16 in) 44.45 mm (13⁄4 in) Nickel Alloy 60 Straight See note
9U-5366 178 mm (7 in) 17.46 mm (11⁄16 in) 44.45 mm (13⁄4 in) Stellite 80 Straight See note
Tool Storage
Miscellaneous
9U-5982 and 9U-5983 Valve Stem Polishers
Warranty: Six Months
• Easily polishes valve stems, push rods, and rocker arm shafts
in a fraction of the time compared to hand polishing
• Removes burrs and nicks while producing up to 300 valves
per hour with a clean, uniform micro-finish
• Comes equipped with a dial load meter, which indicates applied
pressure for optimum performance
• Precision engineered for ease and speed of operation — quality built to last
• Replacement Part: 9U-5984 Polishing Wheel
Electrical:
9U-5982 120V, 8.5 Amps
9U-5983 220V/50 Hz, single phase
Motor RPM 1.725
Dimensions 523.88 in W X 361.95 in D X 425.45 mm in H
(205⁄8 X 141⁄4 X 163⁄4)
ID: C44328T1
Weight 31.75 kg (70 lbs)
Valve size capacity:
Diameter 6 mm - 3⁄8 in (2 ranges) 3⁄8 in - 1⁄2 in
Length 222.25 mm (83⁄4 in) maximum
Output 300 Valves per hour
9U-5517 Roughing Wheel, 57.1 mm (21⁄4 in), 45° 9U-5453 Tapered Pilot
9U-5542 Roughing Wheel, 41.2 mm (15⁄8 in), 30° 9U-5454 Tapered Pilot
9U-5544 Roughing Wheel, 47.6 mm (17⁄8 in), 30° 9U-5404 Expanding Guide Cleaner
9U-5545 Roughing Wheel, 50.8 mm (2 in), 30°
• Lightweight
• Spline drive
• Governor controlled
• Spring loaded spindle for dual-action grinding
• Up to 63.5 mm (21⁄2 in) wheel capacity
ID: C44093T1
Angle No Wheel
of Load Hose Hose Dia.ID: C44094T1 Net Max. Use with
Part No. Drive Speed Conn. Size Capacity Length Weight HP Holders:
9U-5387 Straight 10,000 RPM 6.4 mm 9.52 mm 63.5 mm 282.6 mm 2.5 kg 1 9U-5392
(1⁄4 in PT) (3⁄8 in) (21⁄2 in) (111⁄8 in) (51⁄2 lb) (1702)
9U-5388 15° 10,000 RPM 6.4 mm 9.52 mm 63.5 mm 298.45 mm 12 kg 1 9U-5392
(1⁄4 in PT) (3⁄8 in) (21⁄2 in) (113⁄4 in) (43⁄4 lb) (1702)
• Spline drive
• Up to 152.4 mm (6 in) wheel capacity
• Spring loaded spindle for dual-action grinding
Angle No Wheel
of Load Dia. Net Max. Use with
Part No. Drive Speed Volts Amps Capacity Length Weight HP Holder:
9U-5385 15° 10,000 RPM 115 6 63.5 mm 292.1 mm 3.4 kg .6 9U-5392
(21⁄2 in) (111⁄2 in) (71⁄2 lb)
9U-5587 15° 10,000 RPM 230 3 63.5 mm 292.1 mm 3.4 kg .6 9U-5392
(21⁄2 in) (111⁄2 in) (71⁄2 lb)
9U-5386 15° 8,000 RPM 115 7 76.2 mm 317.5 mm 4 kg 1 9U-5392
(3 in) (121⁄2 in) (8.75 lb) ID: C44081T1
9U-5588 15° 8,000 RPM 230 3.5 76.2 mm 317.5 mm 4 kg 1 9U-5392
(3 in) (121⁄2 in) (8.75 lb)
Lifting Springs
Warranty: Six Months
Machine Tools 9U-5392 Ball Bearing Grinding Wheel Holder This article has changed
Warranty: Six Months
Fans since the printing of the 2006
• Ball bearings are mounted between the inner and outer sleeves. Dealer Service Tools Catalog.
• The hardened and precision ground inner sleeve floats on the pilot
Heaters
and reduces friction and wear.
• For use with No. 2 upper end tapered or expanding pilots
Coolant Reclaiming Stills having 9.53 mm (3⁄8 in) + .101 upper end.
• Valve seat grinding wheel not to be operated above 6500 S.F.P.M.
Cylinder Head
Reclaiming Thread 17.5 mm-16 (11⁄16 in)
Diameter 31.8 mm (11⁄4 in)
Air Compressors Length 127 mm (5 in) ID: C44086T1
• For using valve seat grinding wheels with Black and Decker holders
Tapered Expanding Pilots [9.5 mm (3⁄8 in) + .010 No. 2 Upper End]
Warranty: Six Months
• Self-centered in the valve guide This article has changed
• Range of expansion will handle valve guides from -.002 to +.008 on all since the printing of the 2006
standard sizes, reducing the number of pilots necessary for worn guides.
Dealer Service Tools Catalog.
• All pilots listed are for use with 9U-5392 Grinding Wheel Holder
ID: C41391T1
Tapered Expanding Pilots Tapered Expanding Pilots Tapered Expanding Pilots Heaters
Part No. Size A B Part No. Size A B Part No. Size A B
9U-5406 5.99 mm 92 mm 47.6 mm 9U-5415 8.5 mm 95.3 mm 57.2 mm 9U-5423 10.3 mm 95.3 mm 73.0 mm
(.236 in) (35⁄8 in) (17⁄8 in) (.335 in) (33⁄4 in) (21⁄4 in) (13⁄32 in) (33⁄4 in) (27⁄8 in) Coolant Reclaiming Stills
9U-5407 6.4 mm 95.3 mm 47.6 mm 9U-5416 8.7 mm 95.3 mm 63.5 mm 9U-5424 10.5 mm 95.3 mm 69.9 mm
(1⁄4 in) (33⁄4 in) (17⁄8 in) (11⁄32 in) (33⁄4 in) (21⁄2 in) (.413 in) (33⁄4 in) (23⁄4 in) Cylinder Head
9U-5408 6.5 mm 95.3 mm 47.6 mm 9U-5417 8.99 mm 95.3 mm 63.5 mm 9U-5425 11.0 mm 95.3 mm 73.0 mm Reclaiming
(.256 in) (33⁄4 in) (17⁄8 in) (.354 in) (33⁄4 in) (21⁄2 in) (.433 in) (33⁄4 in) (27⁄8 in)
9U-5409 6.99 mm 95.3 mm 47.6 mm 9U-5418 9.1 mm 95.3 mm 63.5 mm 9U-5426 11.1 mm 95.3 mm 73.0 mm Air Compressors
(.275 in) (33⁄4 in) (17⁄8 in) (23⁄64 in) (33⁄4 in) (21⁄2 in) (7⁄16 in) (33⁄4 in) (27⁄8 in)
9U-5410 7.1 mm 95.3 mm 47.6 mm 9U-5419 9.5 mm 95.3 mm 66.7 mm 9U-5427 11.5 mm 95.3 mm 73.0 mm Tool Storage
(9⁄32 in) (33⁄4 in) (17⁄8 in) (3⁄8 in) (33⁄4 in) (25⁄8 in) (29⁄64 in) (33⁄4 in) (27⁄8 in)
9U-5411 7.5 mm 95.3 mm 47.6 mm 9U-5420 9.9 mm 95.3 mm 66.7 mm 9U-5450 11.9 mm 95.3 mm 73.0 mm
(.295 in) (33⁄4 in) (17⁄8 in) (25⁄64 in) (33⁄4 in) (25⁄8 in) (15⁄32 in) (33⁄4 in) (27⁄8 in) Miscellaneous
9U-5412 7.9 mm 95.3 mm 57.2 mm 9U-5421 10.0 mm 95.3 mm 69.9 mm 9U-5428 12.0 mm 95.3 mm 73.0 mm
(5⁄16 in) (33⁄4 in) (21⁄4 in) (.393 in) (33⁄4 in) (23⁄4 in) (.472 in) (33⁄4 in) (27⁄8 in)
9U-5413 8.0 mm 95.3 mm 57.2 mm 9U-5422 10.1 mm 95.3 mm 66.7 mm 9U-5429 12.7 mm 114.3 mm 85.7 mm
(.315 in) (33⁄4 in) (21⁄4 in) (.396 in) (33⁄4 in) (25⁄8 in) (1⁄2 in) (41⁄2 in) (33⁄8 in)
9U-5414 8.3 mm 95.3 mm 57.2 mm 9U-5384 10.2 mm 95.3 mm 73.0 mm
(21⁄64 in) (33⁄4 in) (21⁄4 in) (.403 in) (33⁄4 in) (27⁄8 in)
of the pilot is indicated as “upper end.” Dealer Service Tools Catalog. PART
STRAIGHT
PART
Air Compressors
High Speed Valve Guide Reamer ID: C07904T1
Item Part No. Description
Tool Storage Warranty: Six Months 1 8B-4422 Taper Reamer No.1
2 8B-8758 Taper Reamer No. 2
Miscellaneous
ID: C41392T1
Part No.
9U-5468
Size (Fractional)
6.4 mm (1⁄4 in)
Length
177.8 mm (7 in)
9U-5404 Valve Guide Cleaner,
9U-5469 6.4 mm (1⁄4 in) +.010 177.8 mm (7 in) Expanding
9U-5470 7.1 mm (9⁄32 in) — .006 177.8 mm (7 in) Warranty: Six Months
9U-5471 7.1 mm (9⁄32 in) — .004 177.8 mm (7 in) • Adjustable for valve guides from 7.9 mm to 15.9 mm (5⁄16 in to 5⁄8 in)
9U-5472 7.9 mm (5⁄16 in) 177.8 mm (7 in) • Flat spring steel blades press against the guide by spring tension and
9U-5473 7.9 mm (5⁄16 in) — .003 177.8 mm (7 in) scrape out the carbon without injury to the guides.
9U-5474 8.7 mm (11⁄32 in) 177.8 mm (7 in) • Complete with one extra set of blades
9U-5475 9.1 mm (23⁄64 in) — .005 177.8 mm (7 in) • Service Part: 9U-5405 Replacement Blades for 9U-5404
9U-5476 9.5 mm (3⁄8 in) 177.8 mm (7 in)
9U-5477 9.9 mm (25⁄64 in) + .006 177.8 mm (7 in)
9U-5478 10.3 mm (13⁄32 in) 177.8 mm (7 in)
9U-5479 11.1 mm (7⁄16 in) — .004 228.6 mm (9 in)
ID: C41389T1
9U-5480 11.1 mm (7⁄16 in) 228.6 mm (9 in)
9U-5481 11.5 mm (29⁄ 64 in) 228.6 mm (9 in)
9U-5482 12.7 mm (1⁄2 in) 228.6 mm (9 in)
ID: C44088T1
• Checks entire valve train — valve, seat, stem, and guide — quickly and accurately
Consist
Vacuum tester
50.8 mm (2 in) disc
76.2 mm (3 in) disc
101.6 mm (4 in) disc
Hose
Spark plug adapter
ID: C44085T1
Air Compressors
Machine Tools
Tool Storage
Fans
9S-9087 Tool Cabinet
Heaters Warranty: Six Months
ID: B08815T1
Miscellaneous
• Used to adjust tension on cutting chain — this tool provides the only safe
and efficient way of adjustment
• Used with 113⁄16 inch socket
• Distance between pins: 117.0 mm (4.60 in)
ID: D01786T1
• 15 ton capacity
• Accommodates hex nuts from 3⁄4 inch (bolt size 1⁄2 inch)
to 11⁄2 inch (bolt size: 1 inch)
• Dial in the size of the nut you want to split — align the mark
on the chisel with the scale on the frame of the nut splitter.
• Service Part: 4C-4713 Replacement Cutter Blade
ID: C34494T1
ID: C80015T1
139-3176
ID: C79289T1
Machine Tools 4C-6507 Heavy-Duty Air Powered FT2798 Track Bar Assembly
Caulking Gun SMCS Code: 4197-025
Model: 267 and 277 Skid Steer Loader with Rubber Track
Fans Warranty: Six Months Warranty: None
Heaters • Easy twist-lock loading • Used to rotate tensioning wheels to increase track tension
• Smooth uniform bead dispensing • Material (tubing): SAE1026 steel
Coolant Reclaiming Stills • No after-dripping • Material (rod): SAE4140 steel
• Pistol handle grip for comfort
Cylinder Head • All metal construction Reference
Reclaiming • Air pressure requirements are 5-100 PSI SEBU7494 Operation and Maintenance Manual
• 10 ft air line with standard 1⁄4 inch fittings supplied
Air Compressors
Tool Storage
Miscellaneous
ID: D00825T1
ID: C41227T1
ID: D00831T1