This document provides calculations to determine the required weld length of a lap joint for a pile with a diameter of 600mm reinforced with 9 steel rods that are each 25mm in diameter. It calculates the load carried by each rod, the shear strength and thickness of the weld, and from this determines the required weld length is 20.09cm for each rod. It then scales this up to determine the total weld length needed on each side of all the rods is 160cm.
This document provides calculations to determine the required weld length of a lap joint for a pile with a diameter of 600mm reinforced with 9 steel rods that are each 25mm in diameter. It calculates the load carried by each rod, the shear strength and thickness of the weld, and from this determines the required weld length is 20.09cm for each rod. It then scales this up to determine the total weld length needed on each side of all the rods is 160cm.
This document provides calculations to determine the required weld length of a lap joint for a pile with a diameter of 600mm reinforced with 9 steel rods that are each 25mm in diameter. It calculates the load carried by each rod, the shear strength and thickness of the weld, and from this determines the required weld length is 20.09cm for each rod. It then scales this up to determine the total weld length needed on each side of all the rods is 160cm.