Professional Documents
Culture Documents
175 013100
175 013100
175 013100
0020 R X Raw Material Test Reports As per applicable code & standard for raw materials
0030 R Welder Qualification Records & Repair Rate Tracking SAES-W-011 and/or W-012 and ASME IX.
0040 R X Weld Procedure Qualification Records, Weld Procedure SAES-W-011 and/or W-012 and ASME IX. Company approval
Specifications and Weld Table required.
0050 R X NDT Personnel and Procedures Verify valid personnel qualification and approved procedures.
0020
0010
***
W
In process inspection & test requirement
Weld Joint Preparations
Specification Details / Notes:
01-SAMSS-010 & SAES W-011 or 012 as required.
0030 W Full Penetration Welding achieved on 2" or Smaller Weld Bosses 01-SAMSS-010 & SAES W-011 or 012 as required.
0040 W R Visual Weld Inspection & Workmanship 01-SAMSS-010 & SAES W-011 or 012. Shall be performed
prior to NDT.
0050 W X Post Weld Heat Treatment (if required) 01-SAMSS-010 & SAES W-011 or 012. Shall be performed
prior to final NDT.
0060 R X Impact test and Hardness test(if required) Per applicable standard.
0080 W R X NDT Per 01- SAMSS-010 , SAES W-011 or 012 and applicable
standard
0030 *** Final inspection & test requirements Specification Details / Notes:
IR013100 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 10/31/2016 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 11/03/2011 IR013100 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010 H X Visual and Dimensional Inspection and Verification of Marking Per 01-SAMSS-010 and PO requirement
0020 W R X Hydrostatic Test (if required) Per 01-SAMSS-010, code and PO requirement.
0040 W X Marking, Spool Identification, cleaning, End Protection and Per 01-SAMSS-010, code and PO requirement.
shipment
0060 R X Product test certificates and records As per applicable SAMSS and IR
Notes:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.
End of IR013100