Professional Documents
Culture Documents
Evaporative Light Scattering Detectors C6279hplcinst
Evaporative Light Scattering Detectors C6279hplcinst
Alltech ELSD
6421
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
279
INSTRUMENTS
Alltech ELSD
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
280
INSTRUMENTS
Alltech ELSD
� � �
��
����
� � � � � �� �� �� �� �� �� �� ������� �
��
� �
��
Obtain a More Accurate Representation of Sample
�
Mass than UV/Vis
�
1. Ephedrine
2. Caffeine
����
� ��
�� � � � � ������
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
281
INSTRUMENTS
Alltech ELSD
Replace Refractive Index (RI) with ELSD for Eliminate Derivatization of Amino Acids
Higher Sensitivity and Stable Baselines
Maintain Stable Baselines with Rapid, Extreme Simplify Detection of Difficult Samples
Gradients
1. Aspartame
� � 2. Cortisone
3. Reserpine
� 4. Dioctyl Phthalate
� � � � � ������� � � � � �� �������
Column: Platinum C18, 3µm, 20 x 4.6mm
™
Column: Adsorbosphere C8, 5µm, 150 x 4.6mm
®
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
282
INSTRUMENTS
Alltech ELSD
Use ELSD for Triggering Fraction Collection of Use ELSD with Microbore Columns Without
UV/Vis Transparent Compounds in Preparative Modifying the Detector
Applications
Glucopyranosides
10438 10310
� �
�
��
����
� � � � � � � ����� � � � � � � � � ������
Column: Alltima™ C18, 5µm, 150 x 10mm Column: Alltima™ C18, 3µm, 150 x 1mm
(Part No. 81102) (Part No. 43864)
Mobile Phase: Water:Acetonitrile (55:45) Mobile Phase: Methanol:Water (90:10)
Flow Rate: 5.0mL/min Flow Rate: 50µL/min
Column Temp: 25°C
Detect Adulteration of Olive Oil Without Near Ambient Temperature Evaporation Maximizes
Derivatizing the Sample Sensitivity for Semi-Volatiles
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
283
INSTRUMENTS
Alltech ELSD
ELSD Simplifies Analysis of Phospholipids in a Use Gradient Elution and Detect Non-
1% Itraconazole Suspension Chromophoric Nutraceuticals
Phospholipids in 1% Itraconazole Suspension Ginkgo Biloba Standardized Extract
6
10426 7 10241
� 1. Itraconazole 1. Bilobalide
2. Phosphatidyl- 2. Ginkgolide J
ethanolamine (PE) 1 3. Ginkgolide C
3. Phosphatidylcholine 4. Ginkgolide A
(PC) 5. Ginkgolide B
� 4. Lyso-Phosphatidyl- 4 6. Quercetin
3
choline (Lyso-PC) 8 7. Kaempferol
� 2 5
�
8. Isorhamnetin
� � �� ������� 0 5 10 15 20 25 30 35 Min.
Column: Hypersil® Silica, 3µm, 150 x 4.6mm Column: Alltima™ C18, 5µm, 250 x 4.6mm
(Part No. 9855) (Part No. 88056)
Mobile Phase: A: Water B: Isopropanol C: Hexane Mobile Phase: A: 0.05%TFA in Water:Methanol (95:5)
Gradient: Time 0 7 13 14 16 B: 0.05%TFA in Methanol
%B 58 50 50 58 58 Gradient: Time: 0 35
%C 40 40 40 40 40 %B: 25 75
Flow Rate: 1.0mL/min Flow Rate: 1.0mL/min
284
INSTRUMENTS
Alltech ELSD
ELSD 2000ES
Now the Most Advanced ELSD is Even More Sensitive!
The ELSD 2000ES Increases the Limit The ELSD 2000ES Increases Sensitivity for
of Detection (2.5ng on Column) Equal Concentrations of Hydrocortisone
10491 10464
10463
1. n-dodecyl-β-D-glucopyranoside 1. Hydrocortisone (100ng on column)
�
�
�����������
�
���������
� � � � � � ������ � � � � � � ������
Column: Alltima™ C18, 5µm, 150 x 4.6mm (Part No. 88052) Column: Alltima™ C18, 5µm, 4.6 x 250mm (Part No. 88056)
Mobile Phase: Methanol:Water (90:10) Mobile Phase: Water:Acetonitrile (55:45)
Flow Rate: 1.0mL/min Flow Rate: 1.0mL/min
Column Temp: Ambient
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
285
INSTRUMENTS
Alltech ELSD
ELSD 2000ES
The Only ELSD with Two Operating Modes Gives You Optimum Performance with Any
Application
Since an ELSD’s response is based on the amount of particles passing through the optical cell, it makes sense that
sending 100% of the column effluent through would net the highest responses. In many cases this is true. Some
samples, such as semi-volatiles may benefit from lower operating temperatures and gas flows achieved by splitting a
portion of the aerosol stream to waste. Only the ELSD 2000ES offers the choice of splitting or not splitting, giving
you optimum sensitivity for every application.
Not Splitting is Best for Non-Volatile Samples Splitting Allows Near Ambient Temperature
and/or Organic Mobile Phases Evaporation, Maximizing Sensitivity for Semi-
Volatiles
Egg Yolk Phospholipid
10214 � 10307
�
1. Phosphatidylethanolamine 1. Urea
2. Phosphatidylcholine (1µg on column)
����
� ����
����
����
� � � � � �� �� �� ������� � � � � � � � ������
Column: Allsphere Silica, 3µm, 100 x 4.6mm
™
The ELSD 2000ES has many features that enhance detector performance, increase productivity, and
decrease downtime:
• Digital gas flow control ensures reproducible results
• Automatic gas shut-off at the end of unattended runs conserves gas
• Self-diagnostic tests automate troubleshooting and verify detector function at start up
• Menu-driven graphical LCD and Windows-based PC control make programming easy
• Method storage and recall simplify set-up
• Alarm set points ensure tight control of critical operating parameters and trigger pump shutdown in case of error
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
286
INSTRUMENTS
Alltech ELSD
ELSD 800
Experience the Benefits of Sensitive,
Universal Evaporative Light Scattering
Detection for the Price of a UV/VIS or RI
Detector!
Low Cost, High Performance
The ELSD 800 is priced thousands less than other
ELSDs with comparable features. Now everyone can
afford to add universal HPLC detection to any HPLC 6419KO
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
287
INSTRUMENTS
Alltech ELSD
288
INSTRUMENTS
Alltech ELSD
Specifications
Nitrogen Purity: 99%
Nitrogen Flow: 4L/min
Suspended Liquids: None
Particles: <0.01µm
Min/Max Operating
6053
Pressure: 60/125psig
Dimension: 10.7" W x 13.4" D x 16.1" H
(27.2cm x 34.0cm x 40.9cm)
The ELSD Nitrogen Generator has a small, compact footprint Weight: 42.5lbs
that fits easily on the lab bench next to your ELSD or Compressed Air Requirements:
mounts on the wall nearby. Purity: Free of water, compressor oil (0.01mg/m3),
hydrocarbons, and particulates (<0.1µm)
Increase productivity, reduce operating costs, and Temperature: 60°F (15°C) - 110°F (43°C)
improve lab safety by eliminating the need to replace Compressor Outlet
Pressure: 90-145psig
nitrogen cylinders. Forget about the need to change the
Compressed Air Flow: 43L/min minimum
nitrogen cylinder or wondering whether there is enough
nitrogen left to finish the run. Take away the worry
of flooding the ELSD and prevent costly repairs with a
constant supply of nitrogen gas!
Alltech’s Nitrogen Generator requires no electricity
and has no moving parts. Nitrogen is generated using ELSD NITROGEN GENERATOR
DESCRIPTION PART NUMBER PRICE
a proprietary membrane separation technology. Simply
ELSD Nitrogen Generator 600150
connect the generator to your lab’s existing compressed
Replacement Parts
air supply or suitable air compressor. The generator 50 ft. 1/4" o.d. PTFE Tubing 3136
separates air into its component gases by passing 1/4" Brass Nuts, 10/pk 14059
compressed air through bundles of individual hollow- 1/4" Brass Ferrules, 10/pk 14062
fiber, semipermeable membranes. As the air passes Plug Valve 12128
through these hollow fibers, water vapor and other 1/4"- 1/4" MPT Brass Male Connection 11639
“fast” gases such as oxygen and carbon dioxide permeate 1/8"-1/4" MPT Brass Male Connection 11635
Accessories
through the wall of the membrane quickly. Only nitrogen
Single-Stage Pressure Regulator, 0-200psig 81892
flows through the fiber bores as the product stream. Maintenance
Alltech’s ELSD Nitrogen Generator produces a Maintenance Kit 600151
continuous, on demand supply of pure nitrogen at flow
rates up to 4L/min. Two ELSDs may be used with one
generator as long as your total gas flow rate is less than
4L/min.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
289
INSTRUMENTS
UV Detectors
The 460 Detector meets today’s needs with growth ALLTECH MODEL 460 UV DETECTOR
options for tomorrow. Flow cell and lamp options let DESCRIPTION PART NO. PRICE
you customize the detector for your application. Choose 460 UV Detector with 254nm Lamp
between 254nm and 280nm detection, and microbore, Standard Cell 460300
Microbore Cell 460400
preparative, or standard HPLC sample cells. Save money
Preparative Cell 460500
by purchasing what you need today and upgrade with 460 UV Detector with 280nm Lamp
other options as your requirements change. Standard Cell 460600
Detect most aromatic compounds with the standard Microbore Cell 460700
254nm lamp. Improve sensitivity for proteins, peptides, Preparative Cell 460800
phenols, and catecholamines with the 280nm lamp. It’s
easy to switch - just change the lamp and filter. Both
lamps last for 4000-6000 hours and are self-aligning for REPLACEMENT PARTS AND ACCESSORIES
easy replacement. DESCRIPTION PART NO. PRICE
Flow Cells
Standard Cell 460301
Microbore Cell 460401
Preparative Cell 460501
Replacement Lamp
254nm 460200
280nm 460201
Filter for 280nm Configuration
280nm Filter 460203
Note: For 280nm detection, you must change both the lamp and filter.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
290
INSTRUMENTS
UV Detectors
The standard deuterium lamp covers UV wavelengths • Flow cells for every application
(190-365nm). An optional tungsten lamp is available The Model 205 comes with a deuterium lamp, and a
for visible wavelengths (366-800nm). Flow cells are stainless steel or Kel-F® 6mm, 9µL flow cell. Other flow
available to support a full range of applications from cells are available to support a full range of applications
microbore to prep. The standard is a 6mm, 9µL 316 from microbore to prep. Lamps and flow cells are easy
stainless steel cell for analytical applications. Kel-F® to change and install. A cuvette holder converts the
flow cells are available for biocompatible applications. detector into a spectrophotometer.
Lamps and flow cells are easy to change and install.
LINEAR MODEL 200 UV/VIS DETECTOR LINEAR MODEL 205 UV/VIS DETECTORS
DESCRIPTION PART NO. PRICE DESCRIPTION PART NO. PRICE
Model 200 Detector Model 205 Detector
With 6mm, 9µL SS Flow cell With 6mm, 9µL SS Flow cell
110V 27410000 110V 205100
220V 27410002 220V 205200
With 6mm, 9µL Kel-F® Flow cell With 6mm, 9µL Kel-F® Flow cell
110V 27410010 110V 205110
220V 27410020 220V 205210
Lamps Lamps
Deuterium Lamp and Assembly 2037077 Deuterium Lamp and Assembly 2037077
Tungsten Lamp and Mounting Plate 2037079 Tungsten Lamp and Assembly 2037078
For information on flow cell options request For information on flow cell options request
instrument support sheet #022. Also available on instrument support sheet #023. Also available on
our website. our website.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
291
INSTRUMENTS
Fluorescence Detectors
The lamp and flow cell are easily accessible from the
front of the instrument for quick exchange.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
292
INSTRUMENTS
Autosamplers
Cooling and large volume options are also Cooling and large volume options are also
available. See instrument support sheet #027 available. See instrument support sheet #007
for more information. for more information.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
293
INSTRUMENTS
HPLC Pumps
Pump Selection
We Have a Pump for Every Need and Budget!
Use this pump feature comparison chart to choose the pump that’s right for your application, then go to the
catalog page for more information.
Pump Comparison Chart
MODEL CATALOG PAGE FLOW RANGE ISOCRATIC/GRADIENT PRESSURE MONITORING
301 HPLC Pump 294 0.01 - 10mL/min isocratic No
426 HPLC Pump 294 0.01 - 10mL/min isocratic Yes
626 HPLC Pump 295 0.001 - 12mL/min isocratic or binary gradient Yes
627 Preparative Pump 296 0.01 - 100mL/min isocratic or binary gradient Yes
726 Quaternary Gradient Pump 297 0.001 - 5.000mL/min quaternary gradient Yes
Model 426 & Model 301 HPLC Pump Specifications MODEL 426 AND 301 HPLC PUMP REPLACEMENT PARTS
Max. Operating Pressure: 6000psig (SS), 5000psig (PEEK) DESCRIPTION PART NO. PRICE
Flow Rate Range: 0.01 to 10mL/min Pump Head Kit, PEEK 120800
Pump Head Kit, Stainless Steel 120799
Flow Rate Precision: 0.2% RSD
Piston Seal Kit 120680
Flow Accuracy: ±2.0% Piston 121486
Dimensions: 6" H x 11" W x 18" D Check Valve Kit, PEEK 060141
(15cm x 26cm x 46cm) Check Valve Kit, Stainless Steel 120679
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
294
INSTRUMENTS
HPLC Pumps
a second 626 pump for high-pressure binary gradients. Use one pump for isocratic applications, or two pumps for
high-pressure binary gradient applications.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
295
INSTRUMENTS
HPLC Pumps
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
296
INSTRUMENTS
HPLC Pumps
Model 726 Quaternary Gradient Pump Specifications ALLTECH MODEL 726 QUATERNARY GRADIENT HPLC PUMP
Max. Operating Pressure: 6,000psig (Stainless Steel) DESCRIPTION PART NO. PRICE
5,000psig (PEEK) Stainless Steel
Flow Rate Range: 0.001 - 5.000mL/min 110V 726100
Flow Precision: 0.2% RSD 220V 726101
Flow Accuracy: ±2.0% PEEK
Gradient Mixing Mode: High-Pressure Gradient 110V 726200
Profiles: Programmable Multi-step 220V 726201
Gradient Programming: 0-100% in 0.1% increments Replacement Parts
Dimensions: 6.75"H x 14.0"W x 16.0"D Piston Seal Kit 160566
(17cm H x 36cm W x 41cm D) Piston Assembly 160565
Weight: 50 lbs (23 kg) Check Valve Kit, Stainless steel 120679
Warranty: 1 year parts, excluding seals and Check Valve Kit, PEEK 060141
check valves; 1 year labor
Note: All replacement parts kits contain parts for one pump head only.
Overlay of same gradient profile run with 5 different pump head combinations
800
The 726 quaternary
gradient pump
delivers accurate 600
and reproducible
solvent
Voltage [mV]
proportioning. 400
200
0 10 20 30 40 50 Min.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
297
INSTRUMENTS
Column Heaters
Alltech Model 631 Column Heater Specifications MODEL 631 COLUMN HEATER
Column Chamber DESCRIPTION PART NO. PRICE
Cavity Dimensions: 1.8" H x 5.0" W x 16.5" D Model 631 Column Heater, PEEK
(5cm x 13cm x 42cm) 110V 631100
Preheater 220V 631200
Metal Free Version: 2' x 0.01" i.d. PEEK coil cast in Model 631 Column Heater, Stainless Steel
tin alloy block 110V 631300
SS Version: 2' x 0.01" i.d. SS coil cast in tin 220V 631400
alloy block
Temperature Control
Temperature Control: Ambient to 85°C
Temperature Accuracy: ±1°C
Temperature Stability: ±0.10°C
Physical
Operating Voltage: 110V, 220V
Outside Case Dimensions: 5.0" H x 10.3" W x 19.5" D
(13cm x 26cm x 50cm)
Warranty: 1 year
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
298
INSTRUMENTS
Column Heaters
• Controls any Eppendorf™ heater from ambient to Eppendorf™ CH-430 & CH-460 Column Heater Specifications
150°C Column Size: 4 columns up to 1/2" (1.3cm) o.d., all
lengths to 30cm plus fittings (CH-430) or
• Monitor “set” and “read” on the LED 50cm plus fittings (CH-460)
• Remote feature allows external ON or OFF Inlet Preheaters: Four sets included
Heating Element: 300W (CH-430) or 500W (CH-460) vulcanized
Eppendorf™ TC-50 Temperature Controller Specifications to heating block
Set/Read Display: 4 digit LED with Set/Read indicators Heater Block: Aluminum, two-part oven
Temperature Adjust: 0.1°C increments via 10-turn Sensor: 1000Ω Platinum RTD
potentiometer
Thermal Cut-Out: 155°C ± 5°C temperature limit
Range: Ambient to 150°C
Dimensions: CH-430: 3-1/2" H x 6-1/2" W x 21" D
Stability: ± 0.1°C typical core stability (8.9cm H x 16.5cm W x 53cm D)
Absolute Accuracy: ± 1°C at 50°C CH-460: 3-1/2"H x 6-1/2" W x 29-1/2" D
Dimensions: 3-1/4" H x 7" W x 8-1/2" D (8.9cm H x 16.5cm W x 74.9cm D)
(8.3cm x 17.8cm x 21.6cm) Warranty: 1 year
Warranty: 1 year *TC-50 Temperature Controller required.
299
INSTRUMENTS
Column Heaters
300
INSTRUMENTS
Data Collection
Based on the EZChrom Elite™ software package, EZStart™ 3.1 with PE Interface Control License allows
EZStart™ is the ideal solution for laboratories wanting PerkinElmer Inc’s interface boxes to be used as analog to
a simple-to-use chromatography data system with digital converters to interface chromatography detectors
comprehensive software features and optional to EZStart™. Control the PE Turbochrom, Turbochrom
instrument control. It is intended to provide the basic EL, TotalChrom, and ACCESS*CHROM interfaces from
requirements for data acquisition and instrument control EZStart™ to take advantage of the software benefits while
from a single workstation. retaining the investment in hardware.
Operation is reduced to three easy steps: PE Interface Control Software controls the
following Perkin Elmer Interfaces:
1. Simple configuration. Collects data from any
- Series 900 Model 941/941A (RS232 communications)
instrument generating an analog output using the
software’s SS420X data interface. - Series 900 Models 950/950A, 960/960A, 970/970A
(GPIB communications)
2. Run in one window. Set up all runs from a single
- NCI 901/902 (GPIB and RS232 communications)
window using simple wizards.
3. Generate graphic reports. Select from existing
templates or customize with the report editor. Ordering Information
GPIB PE Interfaces require a GPIB interface card for
EZStart™ (Part No. 111420, PCI slotted card). Serial PE
Interfaces require available RS232 ports.
Computer Requirements:
- Windows XP (SP1), Windows 2000 (SP3), or
Windows NT (SP6)
EZSTART™ SOFTWARE WITH SS420X INTERFACE
- Microsoft Internet Explorer version 4.0 or
DESCRIPTION PART NO. PRICE
greater 120V 1886011
Some EZStart™ packages require, but do not 220V 1886211
include, a GPIB card from Alltech and Scientific 100V (Japan) 1886311
Software. RS232 ports on the computer may be
required for some instruments.
Recommended System:
- Pentium IV (800MHZ), 128 MB RAM, 10 GB EZSTART™ CHROMATOGRAPHY DATA SYSTEM
hard disk space DESCRIPTION PART NO. PRICE
EZStart 3.1 with PE Interface Control* 1886023
IEEE-488 PCI Card (for PE-Nelson 700 and 111420
900 series intelligent interfaces)**
*One PE interface is required but not included
**Available PCI slot in PC required
For more information on EZStart™ Software, For more information on EZStart™ PE Interface
including instrument control options, request Control Software, request sheet M098. Also
sheet M078. Also available on our website. available on our website.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
301
INSTRUMENTS
Data Collection
Integrators
Thermo Electron ChromJet™ Integrators
Thermo Electron ChromJet™ Specifications
INPUT CHARACTERISTICS
Analog-to-Digital Conversion: Voltage-to-frequency type
Input Range: -10mV to +1.024V
Sampling Rate: 50 or 60 points/sec
Area Per Count: 0.5µV-sec/area count
Input Impedance: 1,000 MΩ, minimum
Dynamic Range: 106
Linearity: ±(0.1% of signal + 0.005% full
scale)
INKJET PRINTER/PLOTTER
Chart Speeds: 11 speeds from 0.1-20cm/sec
Attenuation: 14 levels from 0.5-4, 096mV full
scale
2327 Display: 4 line, 40 character LCD
A remote start cable (Part No. 50304040) is included with MEMORY AND PEAK STORAGE
each integrator. System Memory: 24K of RAM
Storage Memory: 488K of RAM
Total Memory: 512K of RAM
• Baselines drawn on original chromatograms Memory Expansion: 384K of RAM
Computer Interface: RS-232C 110 to 9600 baud
• Automatic re-plot and reintegration (4800, 9600 for output only)
• Multi-level calibration, linear, or non-linear fitting Power: 110-240V (automatically selected)
PHYSICAL
• Automatic calculation of area %, height %, internal
Dimensions: 7" H x 15" W x 18" D
standard, external standard, and normalization % (17.8 x 38.1 x 45.7cm)
Weight: 14.8lb (6.71kg)
For over 20 years chromatographers have used and
Warranty: 1 year
depended on Thermo Electon integrators for accurate,
reliable integration and reporting. The ChromJet™ ACCESSORIES
integrator is a full-feature, high performance integrator. DESCRIPTION PART NO. PRICE
It has a full-size PC-style keyboard and LCD display for Startup Kit (Incl. Paper Carrier, 50303020
easy setpoint entry and editing. 2500 Sheets Z-Fold Paper, 5 Inkjet
Cartridges
The ChromJet™ can store and reprocess up to 128 Z-Fold Paper, 2500 Sheets/Box 50303030
chromatograms individually or in batches. Up to 16 Inkjet Cartridges, 5/pk 50303040
methods can be stored and used to control integration Extended Basic for ChromJet 50303101
parameters. An RS-232C port interfaces the integrator to Remote Start Cable 50304040
computers and external storage devices. A battery backs External Events Cable 50305050
up data for up to 6 months.
Accessories for Hewlett-Packard Integrator
THERMO ELECTRON CHROMJET™ INTEGRATOR HEWLETT-PACKARD INTEGRATOR ACCESSORIES
DESCRIPTION PART NO. PRICE DESCRIPTION PART NO. PRICE
Single Channel General Purpose Analog Signal Cable to 15489
USA Warranty* 50303000 Connect to Non-HP Equipment (with Spade
European Warranty** 50303001 Lug Terminators)
Two Channel General Purpose Remote Control Cable 15408
USA Warranty* 50303010 Z-Fold Paper, 5pkg/box 15609
European Warranty** 50303011 Inkjet Paper, 4 rolls/box 15612
*Integrators must be returned to Thermo Electron USA Office for service. Ink Cartridge, ea 15611
**Integrators must be returned to Thermo Electron European Office for service.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
302
INSTRUMENTS
Data Collection
Chart Recorders
Kipp & Zonen BD 11/11E & BD 12/12E Chart Linear Model 1101, 100mm Chart Recorder
Recorder • High performance data recording at an economical
• High sensitivity – up to 400V full scale price
• Home and grid functions • Compact design saves bench space
• User selectable left or right zero positions • Patented pulse modulated servo system provides
reliable and reproducible recording
5709
Models BD 11/11E & BD 12/12E Recorder Specifications Linear 1101, 100mm Specifications
Chart Speeds: 0.1, 0.2, 0.5, 1, 2, 5, 10, 20mm/min or Chart Speeds: 1, 2, 3, 6, 10, 15, 20 & 30cm/min or hr
mm/sec Input Ranges: 1, 2, 5, 10, 20, 50mV and0.1, 0.2, 0.5, 1,
Input Ranges: 1, 2, 5, 10, 20, 50, 100, 200, 500mV and 1, 2, 5V Full Scale
2, 5, 10, 20V Full Scale Input Impedance: 2.5MΩ, Fixed
Input Impedance: 1M DC Zero Adjust: ±100%
Zero Adjust: -50 to +150% Full Scale Accuracy: ±0.5% Full Scale
Non Linearity: <0.3% Full Scale Deflection (200mm) Response Time: <0.25sec, Full Scale
Response Time: <0.2sec (5-95% Full Scale Deflection) Power: 120/240VAC, 50/60Hz, 8W
Power: 110/220V, 50/60Hz, Dimensions: 4.4" H x 8.6" W x 10.5" D
Dimensions: 3.5" H x 15" W x 11.4" D (11.2cm H x 21.8cm W x 26.7cm D)
(9.0cm H x 38.0cm W x 29.0cm D)
Weight: 6.5lbs (3kg)
Weight: 7.7lbs (3.5kg)
Other Features: Override Event Marker
Other Features: Meets CSA and VDE Specifications
Warranty: 1 Year Parts, 90 days labor
Warranty: 1 Year, Parts and Labor
KIPP & ZONEN BD 11/11E 12/12E CHART RECORDERS LINEAR 1101 CHART RECORDERS
DESCRIPTION QTY. PART NO. PRICE USE WITH RECORDER MODEL: PART NO. PRICE
BD 11 Single Channel, 110/220V ea 110200 Model 1101 Recorder, 120V 1101
BD 11E Single Channel with Electric ea 110201 Model 1101 Recorder, 240V 11020
Pen Lift and Remote Control,
110/220V
LINEAR ACCESSORIES
BD 12 Dual Channel, 110/220V ea 120200
DESCRIPTION QTY. PART NO. PRICE
BD 12E Dual Channel with Electric Pen ea 120201
Lift and Remote Control, Linear Chart Paper
110/220V Use with Recorder Model: 1 0100-0011
140, 141, 143, 1101, 1110, 2010 6 001106
24 001124
KIPP & ZONEN ACCESSORIES 5" Chart paper (Metric)
DESCRIPTION QTY. PART NO. PRICE Use with Recorder Model: 1 0100-0017
Chart Paper 155, 156, 157 6 001706
Linear Graduation Paper 10 40408 24 001724
Disposable Replacement Pens
Red 6 40410
Blue 6 40412
Green 6 40414
Black 6 40416 For recorder pens and chart paper (strip chart
Red 2nd Channel 6 40418 rolls, Z-fold, and thermal paper) for many popular
Black 2nd Channel 6 40420
recorders, request sheet #002705D.
© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.
303