BaTiO3 powder was coated with silica to prevent sintering and grain growth at high temperatures. Nanosized BaTiO3 powder was coated using a sol-gel method, where tetraethyl orthosilicate was added to the BaTiO3 powder in an ethanol solution. The coated BaTiO3 powder maintained its nano-scale size even after sintering at 1300°C for 2 hours, showing silica's ability to inhibit sintering and grain growth at high temperatures.
The Effect of Sintering Temperature On Bilayers Hydroxyapatite Coating of Titanium (Ti-6Al-4V) ELI by Electrophoretic Deposition For Improving Osseointegration
BaTiO3 powder was coated with silica to prevent sintering and grain growth at high temperatures. Nanosized BaTiO3 powder was coated using a sol-gel method, where tetraethyl orthosilicate was added to the BaTiO3 powder in an ethanol solution. The coated BaTiO3 powder maintained its nano-scale size even after sintering at 1300°C for 2 hours, showing silica's ability to inhibit sintering and grain growth at high temperatures.
BaTiO3 powder was coated with silica to prevent sintering and grain growth at high temperatures. Nanosized BaTiO3 powder was coated using a sol-gel method, where tetraethyl orthosilicate was added to the BaTiO3 powder in an ethanol solution. The coated BaTiO3 powder maintained its nano-scale size even after sintering at 1300°C for 2 hours, showing silica's ability to inhibit sintering and grain growth at high temperatures.
BaTiO3 powder was coated with silica to prevent sintering and grain growth at high temperatures. Nanosized BaTiO3 powder was coated using a sol-gel method, where tetraethyl orthosilicate was added to the BaTiO3 powder in an ethanol solution. The coated BaTiO3 powder maintained its nano-scale size even after sintering at 1300°C for 2 hours, showing silica's ability to inhibit sintering and grain growth at high temperatures.
The Effect of Sintering Temperature On Bilayers Hydroxyapatite Coating of Titanium (Ti-6Al-4V) ELI by Electrophoretic Deposition For Improving Osseointegration