Professional Documents
Culture Documents
Plano de Chancadora
Plano de Chancadora
A A
3 1
B B
3 1
5
C C
D D
E E
F F
G 10 G
H H
10
I I
J J
K K
L L
M Item 13 part & drawing nos. were 1000272607. Removed item 15. M
5 STY-IN VSAS-IN 22-Dec-17 Items 23, 24, 26 and 27 qty were 8, 24, 16 and 56. Added items
11 33, 34 and 35. In sheet 1; added note 6. In sheet 2; updated
SECTION L-L and added SECTION M-M.
13 2. With the actuator rod fully extended, adjust the linkage rod so that the dart valve (Item 8) fully
4 5 contacts the valve seat (Item 4) around the complete circumference of the valve. The
P dart valve (Item 8), when properly adjusted should compress the valve seat by 2mm- P
35 23 26 6 5 4mm [1/16"-1/8'']. Air supply to actuator for set-up and testing should be set to 420-480 kpa [60-70 PSI]. Assembly, dart valve, hinged-Ø175 Grommet
8 3. Unless otherwise specified all bolts shall be torqued to their respective grade and size values listed in Flotation, D-O, Wemco, XCELL, 130RT
34 5 drawing 1000135380 – Metric, 75% of proof strength. Mat.: N/A Weight: 1061 kg Welds: N/A Based on: 1000223674 ISO-A
Unless otherwise specified, adhere to General Workshop Instruction No: 1000024420 Replacing: N/A Sheet 1 of 3
13 4 5 4 4. Property of FLSmidth A/S. This drawing contains confidential, proprietary, and/or trade secret information of FLSmidth A/S. This drawing and/or
the information contained therein, may only be used for the limited purposes of evaluating proposals or installing, operating or maintaining
Q 4 5. Apply all around a continuous bead of sikaflex sealant (Item 32) to all seams indicated.
FLSmidth® equipment. Disclosure, distribution, duplication, modification, or other use of this drawing and/or the information therein is not Q
permitted without the prior written permission of FLSmidth A/S. © FLSmidth A/S. All rights reserved.
No.: Content
5 6. Cover countersunk head cap screws (item 35) with sikaflex sealant (Item 32) after final torqueing.
1000229539 Rev.:
5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
1 3 33
1 3 13
B B
(Support, actuator frame)
(Reference)
2X
2X
31 25 28 2
C 17 24 27 C
(Assembly, cell)
(Reference)
2X
D 28 25 20 D
11
28 25 19
SEE
2X
NO
(Assembly, cell)
SECTION K-K 4
TE 2
E (From This Sheet) E
9
(Rotated Clockwise)
2X
2 22 25 28 TORQUE TO 530 N-m
F F
29
5 10
G G
H B B H
DETAIL D
(See This Sheet) (From This Sheet) SECTION E-E
=
I 10 I
2X
A A 22 25 28 TORQUE TO 530 N-m
(See This Sheet)
2X
=
4
22 25 28 TORQUE TO 530 N-m
J J
CL GROMMET 12
3
M M 5 K
(See
(See This Sheet) This Sheet)
K D K K
6 (See This Sheet) 8
(See This 2X
Sheet)
22 25 28 TORQUE TO 530 N-m
F E
(See This Sheet) 5
L L
14 23 26 34 Mat.: N/A Weight: 1061 kg Welds: N/A Based on: 1000223674 ISO-A
5 2X Unless otherwise specified, adhere to General Workshop Instruction No: 1000024420 Replacing: N/A Sheet 2 of 3
Property of FLSmidth A/S. This drawing contains confidential, proprietary, and/or trade secret information of FLSmidth A/S. This drawing and/or
28 SPACER WASHERS MUST the information contained therein, may only be used for the limited purposes of evaluating proposals or installing, operating or maintaining
Q BE INCLUDED AS INDICATED. FLSmidth® equipment. Disclosure, distribution, duplication, modification, or other use of this drawing and/or the information therein is not Q
33 permitted without the prior written permission of FLSmidth A/S. © FLSmidth A/S. All rights reserved.
2X Content
No.:
1000229539 Rev.:
5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Find no. Description Part no. Drawing no. QTY U.O.M. Material Total Weight
(kg)
13 Wear plate, hinged dart, type 1 1000278709 1000278709 2 EA A36 STL 75.4
5 4
Screw, cap, hexagon socket head, ISO 4762, M12x70, Plain Carbon
D 14 8.8, electroplated 1000003558 8 EA
Steel
0.64 D
15 0
5 4
16 Screw, hexagon head, ISO 4017, M16x50, 8.8, 1000008552 8 EA Plain Carbon 0.96
electroplated Steel
17 Screw, hexagon head, ISO 4017, M16x80, 8.8, 1000008557 16 EA Plain Carbon 2.56
electroplated Steel
18
E 4 E
19 Screw, hexagon head, ISO 4017, M20x55, 8.8, 1000008563 8 EA Plain Carbon 1.68
electroplated Steel
20 Screw, hexagon head, ISO 4017, M20x65, 8.8, 1000008564 38 EA Plain Carbon 9.12
4 electroplated Steel
21 Screw, hexagon head, ISO 4017, M20x80, 8.8, 1000006487 16 EA Plain Carbon 4.32
electroplated Steel
22 Screw, hexagon head, ISO 4017, M20x90, 8.8, 1000006485 40 EA Plain Carbon 12
electroplated Steel
F Plain Carbon
F
23 Nut, hexagon, ISO 4032, M12, 8, electroplated 1000006024 16 EA 0.2256
5 Steel
24 Nut, hexagon, ISO 4032, M16, 8, electroplated 1000006025 16 EA Plain Carbon 0.5504
5 Steel
25 Nut, Hexagon, ISO 4032, M20, 8, electroplated 1000006026 110 EA Plain Carbon 7.183
2 Steel
26 Washer, ISO 7089, 12, 200 HV, electroplated 1000004158 24 EA Plain Carbon 0.14952
5 Steel
G 27 Washer, ISO 7089, 16, 200 HV, electroplated 1000006562 40 EA Plain Carbon 0.4492
G
5 Steel
28 Washer, ISO 7089, 20, 200 HV, electroplated 1000006565 268 EA Plain Carbon
4.57208
4 2 Steel
29 Nut, thin, hexagon, ISO 4035, M48, 05, electroplated 1000150806 2 EA Plain Carbon
1.14636
Steel
30
4
H 31 Screw, hexagon head, ISO 4017, M20x45, 8.8, 1000008561 8 EA Plain Carbon H
1.52
2 electroplated Steel
32 Sealant, unipac, 600 ml 1000199250 1 EA 0.3
4
33 Wear plate, hinged dart, type 2 1000277427 1000277427 2 EA A36 STL 140
5
5 34 Spacer, wear plate 1000278710 1000278710 4 EA A36 STL 1.6
35 Screw, countersunk head, hexagon socket, ISO 10642, 1000003591 8 EA Plain Carbon
I 5 M12x40, 8.8, electroplated 0.32 I
Steel
J J
K K
L L
M M
N N
O O
P P
Mat.: N/A Weight: 1061 kg Welds: N/A Based on: 1000223674 ISO-A
Unless otherwise specified, adhere to General Workshop Instruction No: 1000024420 Replacing: N/A Sheet 3 of 3
Property of FLSmidth A/S. This drawing contains confidential, proprietary, and/or trade secret information of FLSmidth A/S. This drawing and/or
the information contained therein, may only be used for the limited purposes of evaluating proposals or installing, operating or maintaining
Q FLSmidth® equipment. Disclosure, distribution, duplication, modification, or other use of this drawing and/or the information therein is not Q
permitted without the prior written permission of FLSmidth A/S. © FLSmidth A/S. All rights reserved.
No.: Content
1000229539 Rev.:
5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26