Professional Documents
Culture Documents
Unit Test in Eim Grade 9
Unit Test in Eim Grade 9
Unit Test in Eim Grade 9
TEST I
Direction: On the space provided before the number, write T if the statement is correct and F if it is false.
_____ 3. Light tools and equipment should be placed at the lowest part of the cabinet shelf.
TEST II
Choose the letter of the best answer. Write your answer on a separate sheet of paper.
6. This is generated by examining the goods and services sold within the community.
8. These are luxuries, advantages and desires that every individual considers beyond necessary.
A. wants B. desires
C. requirements D. needs
9. This is the factor or consideration presented by a seller that explains why one product or service is
different from or better than that of the competitors.
10. This is the introduction of a new idea to make the product and services more attractive and saleable to
the target customers.
A. new idea B. creativity
C. product development D. innovation
11. These are the things that people cannot live without.
A. wants B. desires
C. requirements D. needs
12. What is the purpose of turning the drill on before attempting to drill a hole.
A. see if the drill operates. B. see if the drill bit is running true
C. make sure the chuck key. D. check if the power cord is good
has been removed
13. The purpose of moving the drill and the bit up and down often while drilling deep holes is to?
A. ream the hole slightly larger. B. give the drill operator better drilling leverage.
C. help keep the hole centered. D. reduce overheating in the drill bit.
14. What will likely happen if a large capacity portable drill bit jams during the drilling operation?
A. The bit will break. B. The drill will likely stall out and overheat.
C. The drill will rotate in the D. The hole will become badly distorted.
opposite direction to the
bit causing injury to the
user’s wrist.
15. What kind of pressure should be applied to a drill during the drilling operation?
16. What type of drill speed is needed for wood drilling operation?
A. Low B. Medium
C. Low-medium D. High
17. What type of drill speed is needed for most metal drilling operations?
A. Low B. Medium-high
C. Medium-low D. High
20. What personal protective equipment should be worn when operating the portable disc grinder?
A. Safety glasses
B. Safety glasses and hearing protection
C. Safety glasses, hearing protection and gloves
D. Safety glasses, hearing protection, gloves and respirator.
21. When operating the portable disc grinder, the grinding disk should be positioned so that the sparks and
grit are thrown _____.
22. Grinding with the portable disc grinder should not be done in an area which______________.
A. is enclosed. B. is clean.
C. has windows. D. contains flammables or combustible gases.
23. Hands and arms should be protected by wearing ____________ when using the portable disc grinder.
24. What may possibly happen when the wire brush attachment is used on the portable disc grinder?
25. When the portable disc grinder is laid down, it should be positioned _____________.
TEST III
A. Chuck
B. Chuck Wrench
D. Electrical Cord
E. Pistol Grip
F. Reversing Switch
G. Switch Lock
H. Trigger Switch