Professional Documents
Culture Documents
Dse E800
Dse E800
DSEE800
SPECIFICATIONS
DC SUPPLY
CONTINUOUS VOTLAGE RATING
8 V to 35 V continuous
ENGINE CONTROLLER CRANKING DROPUTS
Able to survive 0 V for 50 mS, providing supply
was at least 10 V before dropout and supply
recovers to 5 V. This is achieved without the
need for internal batteries.
INPUTS
DIGITAL INPUTS A to K
Configurable as:
Positive switching
Negative switching
RATIOMETRIC INPUT A
Configurable as:
Negative switching digital input
0 V to 10 V
4 mA to 20 mA
0 Ω to 480 Ω
RATIOMETRIC INPUTS B to L
Configurable as:
Negative switching digital input
0 V to 10 V
4 mA to 20 mA
0 Ω to 1920 Ω
OUTPUTS
DC OUTPUT A (FUEL) & B (START)
KEY FEATURES • CAN, Magnetic Pick-up or KEY BENEFITS 10 A short term,
• Built-in governor control tachometer speed sensing • 132 x 64 pixel ratio display for 5 A continuous at supply voltage
• Automatic speed control • Fuel usage monitor and low fuel clarity VOLT-FREE OUTPUTS C & D
• Manual speed control via push alarms • Real-time clock provides accurate 5 A DC at 35 V DC
8 A AC at 250 V AC
buttons, digital input or analogue • Charge alternator failure alarm event logging
input • Manual fuel pump control • Set maintenance periods can be DC OUTPUTS E, F, G & H
• Automatic speed ramping • “Protections disabled” feature configured to maintain optimum 2 A DC at supply voltage
• Flexible automatic start control • LED and LCD alarm indication engine performance PWMi OUTPUTS I, J, K & L
• Clutch control • USB connectivity • Ethernet communications provides 4 A at supply voltage
20 Hz to 250 Hz
• 4-Line back-lit LCD text display • Backed up real time clock built in advanced remote
• Multiple display languages • Fully configurable via DSE monitoring. PULSE PICK-UP
VOLTAGE RANGE
• Five key menu navigation Configuration Suite PC software • Can be integrated into remote ±0.5 V to 60 V RMS
• Front panel editing with PIN • Configurable display languag• monitoring systems Fully isolated
protection • Remote SCADA monitoring via DSE • Increased input and output FREQUENCY RANGE
• Customisable status screens Configuration Suite PC software expansion capability via DSENet® 10,000 Hz (max)
• Power save off mode • User selectable RS232, RS485 & • Licence-free PC software
BUILT-IN GOVERNOR CONTROL
• Configurable digital inputs (11) Ethernet communications • IP65 rating (with supplied gasket) MINIMUM LOAD IMPEDANCE
• Configurable ratiometric • Modbus RTU & TCP support offers increased resistance to water 1000 Ω
Fully isolated
inputs (12) • User configurable MODBUS pages ingress
• Configurable DC outputs (4) • Advanced SMS control and fault • Advanced PLC editor allows GAIN VOLTAGE
0 V to 10 V DC
• Configurable volt-free outputs (2) messaging (additional GSM modem user configurable functions to meet
• Configurable PWMi outputs (4) required) application requirements. OFFSET VOLTAGE
• Configurable timers and alarms • Start & stop capability via SMS • Automatic speed control ±10 V DC
• 3 configurable maintenance alarms messaging • Manual speed control via push DIMENSIONS
• Multiple date and time engine • Additional display screens to help buttons, digital input or analogue OVERALL
240 mm x 172 mm x 57 mm
scheduler with modem diagnostics input 9.4” x 6.8” x 2.2”
• Configurable event log (250) • DSENet® expansion compatible
PANEL CUTOUT
• CAN engine support • Data logging and trending 220 mm x 160 mm
• Advanced Integral PLC editor 8.7” x 6.3”
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment
The DSEE800 is an easy to use With the built in PLC editor the Using the DSE Configuration Suite
engine controller designed to provide controller is fully flexible and can PC Software the controller is easy TEMPERATURE
BS EN 60068
flexible control with built in monitoring be adjusted to meet many different to use and configure which allows Ab/Ae Cold Test -30oC
and protection. The DSEE800 is needs, providing the user with the alteration of operating parameters, BS EN 60068-2-2
compatible with both electronic and ability to achieve special operating sequences, timers and alarms. Bb/Be Dry Heat +70oC
non-electronic diesel engines and modes which are unique to their VIBRATION
fully configurable for a wide range of machine and application. A range of BS EN 60068-2-6
applications such as engine driven comprehensive communication and Ten sweeps in each of three major axes
pumps, compressors, hydraulic power system expansion options ensures 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
packs and off highway machinery. that the user can extend the input and HUMIDITY
output capability and communicate BS EN 60068-2-30
Control of the application can be with other devices or systems offering Db Damp Heat Cyclic 20/55oC @ 95% RH
48 Hours
achieved both automatically and further advanced and high level use BS EN 60068-2-78
manually with engine start, speed in very demanding applications. Cab Damp Heat Static 40oC @ 93% RH
and clutch control all built in. The On board event, data logging 48 Hours
monitoring and configuration of and trending makes it possible to
SHOCK
system variables allows the controller determine preventative maintenance BS EN 60068-2-27
to start and stop the engine, increase and improved performance criteria for Three shocks in each of three major axes
and decrease engine speed as the machine. 15gn in 11mS
the output demands and program DEGREES OF PROTECTION
ramping for loading/unloading of the PROVIDED BY ENCLOSURES
engine. BS EN 60529
IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
DSENET® RS232 AND USB USB CONFIGURABLE DC OUTPUTS RATIO-METRIC EMERGENCY DC POWER
EXPANSION RS485 PORT HOST INPUTS INPUTS STOP SUPPLY 8-35V
ETHERNET +
VOLT FREE PWM OUTPUTS FUEL & START CHARGE ELECTRONIC MAGNETIC
OUTPUTS OUTPUTS ALTERNATOR ENGINES PICK-UP
D+
PWMi + W/L
2 4
ISSUE 2