Professional Documents
Culture Documents
06 Session Plan
06 Session Plan
Sector : Electronics
Qualification Title : Computer Systems Servicing NC II
Unit of Competency : Install and Configure Computer Systems
Module Title : Installing and Configuring Computer Systems
Learning Outcomes:
1. Assemble computer hardware
2. Prepare installer
3. Install operating systems and drivers for peripherals/devices
4. Install application software
5. Conduct testing and application
A. INTRODUCTION
This session plan covers the knowledge, skills and attitudes required to maintain poultry house and its
facilities. It includes activities such as conducting preparation activities, maintaining poultry house and
facilities, maintain farm area and perform work to completion. he following competencies: Computer
Hardware Installation, Computer Operating System/ Application Software and other computer
peripherals/devices.
B. LEARNING ACTIVITIES
LO 1: Assemble computer hardware
Resourc
Learning Content Methods Presentation Practice Feedback Time
es
1.OH&S policies and Self-paced Read information Answer the Compare CBLM/ 2 hrs.
procedure are followed sheet 1.1-1 OH&S self-check your answer Learning
Date Developed: Document No.
October 2016 Issued by:
Computer Systems Servicing NC II
Page 13 of 101
CNSC Plan Training Session Developed by:
Mark Ian B. Yongco Revision # 00
policies and 1.1-1 on the Materials
procedure are answer key
followed 1.1-1
2.Identifying and Self-paced Read information Answer the Compare CBLM/ 2 hrs
checking of the sheet 1.1-2 self-check your answer Learning
necessary materials Identifying and 1.1-2 on the Materials
against systems checking of the answer key
requirements necessary 1.1-2
materials against
systems
requirements
3.Obtaining the tools, Self-paced Read information Answer the Compare CBLM/ 2 hrs
equipment and testing sheet 1.1-3 self-check your answer Learning
devices needed Obtaining the 1.1-3 on the Materials
tools, equipment answer key
and testing devices 1.1-3
needed
Demonstration Evaluate
Read Job Sheet Perform job
performance
1.1-1 on Dis Sheet 1.1-1
using
assembling and on Dis
Performance
Assembling assembling
criteria
computer and
checklist
hardware Assembling
assembling System computer
Unit hardware
assembling
System Unit
3.Accessing and Self-paced Read information Answer the Compare CBLM/ 2.5
installation of OS and sheet 1.3-3 self-check your hrs
Learning
drivers Accessing and 1.3-3 answer on Materials
updates/patches installation of OS the answer
and drivers key 1.3-3
updates/patches
4.On-going checks of Self-paced Read information Answer the Compare CBLM/ 2 hrs
the quality of the work sheet 1.3-4 On- self-check your Learning
are undertaken going checks of the 1.3-4 answer on Materials
quality of the work the answer
are undertaken key 1.3-4
3.Accessing and Self-paced Read information Answer the Compare CBLM/ 2 hrs
installation of sheet 1.4-3 self-check your Learning
software updates in Accessing and 1.4-3 answer on Materials
accordance with installation of the answer
manufacturer’s software updates key 1.4-3
recommendations and in accordance with
requirements manufacturer’s
recommendations
and requirements
3.Follow the 5S and Self-paced Read information Answer the Compare CBLM/ 2 hrs
C. ASSESSMENT PLAN
1. Written Test
Questions on the inspection to ensure that the outcomes required in installing and configuring desktop and workstation
computer systems conform to the requirements.
2. Performance Test
Performs assemble/Disassemble computer hardware
Performs installation of operating system and drivers for peripherals/devices
Performs installation of application software
3. Oral Questioning
D. TEACHER’S SELF-REFLECTION OF THE SESSION
The student/ trainee will proceed to the next competency if he/she is competent with the assigned task.
Progress of trainees
Passing rate of candidates.