Professional Documents
Culture Documents
p7 Subminiature Pushbuttons Catalog Page
p7 Subminiature Pushbuttons Catalog Page
SUBMINIATURE
PUSHBUTTONS MINI-SIZED PER MIL-PRF-8805/110
MOMENTARY ACTION, SEALED SUBMINIATURE PUSHBUTTON SNAP-ACTION SWITCHES
C US
switches are offered: Moistureproof and dusttight to IP64
and MIL-PRF-8805 Design 2 or watertight to IP68S and to Standard Characteristics/Ratings:
MIL-PRF-8805 Design 3.
ELECTRICAL RATINGS: Sea Level @ 28VDC 50,000 feet @ 28VDC
or 115VAC, 60Hz or 115VAC, 60Hz
Features: Load Circuits: 1 & 2 3–5 6 1 & 2 3–5 6
• Low level switching capability Resistive 5A 2.5A 4A 5A 2.5A 4A
Inductive 3A 1.5A 2A 3A 1.5A 2A
• Less than 25mΩ initial contact resistance
Lamp 1A 0.5A N/A N/A N/A N/A
• High contact pressure Motor 3A 1.5A N/A N/A N/A N/A
• 6 circuit variations DWV 1050Vrms 400Vrms
Center Contact 3A max
• Positive tactile feedback
Low Level 10mA @ 30mV
• Variety of mounting styles
Electrical Life: 25,000 cycles
• Square button option with case style A Mechanical Life: 1,000,000 cycles
• Qualified to MIL-PRF-8805/110 Moistureproof and dusttight to IP64 and MIL-PRF-8805
Seal:
Design 2 or Watertight to IP68S and MIL-PRF-8805 Design 3
• Moistureproof and dusttight to IP64 and MIL-PRF-8805
Operating Temp Range: -55°C to +85°C
Design 2 or Watertight to IP68S and MIL-PRF-8805
Operating Force: 1.7 +/- 0.5 lb.
Design 3
Total Travel: 0.080 inches max
• RoHS compliant Overtravel: 0.010 inches min
MATERIALS:
Case: Anodized aluminum alloy
Button: Thermoplastic
Terminals: Brass with gold over silver
Terminal Hardware: None provided
Mounting Hardware: Hex nut, lockwasher and panel gasket when applicable
174 OTTO Full Line Catalog Specifications Subject To Change Without Notice
P7
COMMERCIAL & MILITARY GRADES SUBMINIATURE
PUSHBUTTONS
.75
.53 .03 P7-6 Series .26
P7-1 Series N.C. .047 N.C.
(.102 ) (SQUARE END)
Case Style 6 .125 .09 MIN.
Case Style 1 N.O. 15/32” FROM
.080 MIN. .09 MIN FROM N.O.
Press Fit Mount POTTING (ROUND POTTING
Threaded
N.O.
END) .562
Also available with .350 .31 .380 (ROUND END) Bushing .343
PC terminals.
.055 HOLE N.C. Also available with
.195 .015 (SQUARE N.O.
.437
END)
PC pins. 15/32-32UNS-2A N.C.
.192 TO WITHIN .062
OF SHOULDER
P7-7 Series
P7-2 Series
Case Style 7
Case Style 2 Press Fit Mount
Press Fit Mount
PUSHBUTTON SWITCHES
Also available with
Also available with PC pins.
PC pins.
P7-8 Series
P7-3 Series
Case Style 8
Case Style 3 Press Fit Mount
Bezel/Threaded Guarded Button
Bushing
Also available with
Also available with PC pins.
PC pins.
Terminal
P7-5 Series Style
“A” & “B”
Case Style 5
1/4” Threaded
Bushing
Important Note: Because the base case interface has epoxy applied over it, dimensions
.50 SQ. .62 to this surface are difficult to measure. This surface is not recommended as a hard stop,
due to the extra variation of the epoxy surface.
P7-A Series
P7 PART NUMBER CODE
Case Style A P7 – X X X X X X
15/32” Threaded
Bushing .448 .005
Square Button Shown TO FLAT
Case Terminal Style/ Circuit Form Contact Case Color/ Button
Style Construction Grade Rating Button Dia. Color
Also available with
.26 .49 1. Style 1 A. Solder/Commercial 1. N.O. 1. Std. 1. Clear/Std. 1. Red
.04 .09 MIN.
PC pins and round buttons. .17 .23 FROM POTTING 2. Style 2 B. Solder/Watertight 2. N.C. 2. Low Level 2. Black/Std. 2. Black
.13 TYP. 3. Style 3 Commercial 3. N.C. 3 Terminal 3. Clear/0.312 ➀ 3. Orange
Round Button versions do 5. Style 5 1. Solder/Military/Short 4. N.O. 3 Terminal 4. Black/0.312 ➀ 4. Yellow
not have a D-flat.
6. Style 6 2. Solder/Commercial/Short 5. 5 Terminal 5. Clear/ 5. Green
7. Style 7 3. Solder/Mil. Watertight/Short 6. 2 Circuit Square .50 ➁ 6. Blue
8. Style 8 4. PC Pin/Commercial 6. Black/ 7. Purple
.17
A. Style A 5. PC Pin/Military Square .50 ➁ 8. Gray
15/32-32 UNEF-2A
TO WITHIN .062 6. PC Pin/Mil. Watertight 9. White
OF SHOULDER 7. Solder/Com. Watertight/Short
8. PC Pin/Com. Watertight
176 OTTO Full Line Catalog Specifications Subject To Change Without Notice