Professional Documents
Culture Documents
Spectrapac 309 Engine Cooling
Spectrapac 309 Engine Cooling
Spectrapac 309 Engine Cooling
Take a 5 ml Make the sample up to Add 2 Nitrite No. 1 Add 1 Nitrite No. 2 tablet Continue adding the
sample with 50 ml using distilled tablets and shake to and shake to disintegrate.
disintegrate Nitrite No
No. 2 tablets one at
the syringe water. disintegrate (or crush with the time, until a pink
and place into the rod provided). Sample colour persists for at least
the container will be white. 1 minute.
provided.
Calculation: Example:
Nitrite (ppm) = number of Nitrite No.2 tablets x 180 If 9 tablets are used. Nitrite = 9 x 180 = 1620 ppm
Record the result as ppm Nitrite in Waterproof or your customised result logging system.
OPTIMISING PERFORMANCE
TABLET TEST METHOD
Take a 50 ml water Add 1 Chloride tablet and shake to disintegrate, sample Repeat tablet addition, 1 at the time (giving
sample in the container should turn yellow if Chlorides are present time for the tablet to dissolve) until the
provided. yellow colour changes to permanent
Orange/Brown.
Calculation: Example:
Chloride (ppm) = (number of Chloride tablets x 20) – 20 If 3 tablets are used. Chloride = (3 x 20) - 20 = 40 ppm
Record the result as ppm Cl in Waterproof or your customised result logging system.
OPTIMISING PERFORMANCE
TABLET TEST METHOD
Fill the sample container with about 30 Dip one of the test strips into the water Withdraw the strip from the sample and
ml of cooling water sample. sample so that the colour zone is compare the colour obtained with the colour
completely immersed for 1 minute. scale on the pH indicator strips container.
OPTIMISING PERFORMANCE