Professional Documents
Culture Documents
Bombas Electrosumergibles
Bombas Electrosumergibles
Bombas Electrosumergibles
Pump Technology
ESP Catalog
Introduction
Getting started
1. For optimal viewing of this catalog, it is recommended that you install the latest version of Acrobat®
Acrobat® Reader®. The necessary files are available online at the following location.
2. By default, Reader opens and views linked PDF documents in one window to minimize the number of
windows open. However, this option may make navigation in this catalog more difficult. To have a Want to know more?
linked document open in a separate window—leaving the catalog menu active—uncheck the Open Click the Schlumberger logo
cross-document links in same window option in the General section of your Reader Preferences. at the bottom of the navigation
pages to visit the Artificial Lift
Note: To override this setting without changing your preferences, you can press Ctrl (in Microsoft® web site.
Windows®) or Option (in Mac OS®) when selecting a link.
3. To have this interactive catalog on your hard drive, copy the entire contents of this CD into a single
folder. Please note that all of the files on this CD must be in the same folder for proper navigation.
Go to Catalog Contents }
*Mark of Schlumberger
Other company, product, and service names are the properties
of their respective owners.
REDA Electric Submersible
Pump Technology
ESP Catalog
Help
For help using Adobe Acrobat Reader, press the F1 key or click
here to access Adobe Acrobat online help.
} Main Menu Contents Search
REDA Electric Submersible
Pump Technology
ESP Catalog
Contents
QHSE
Application Engineering
Optimization Services
Advanced Lifting Services
Advanced Applications
Downhole Monitoring
ESP Components
Surface Power and Control
|} Main Menu Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Application
Engineering
Application Engineering
ESP System Components
Basic Equipment Selection
Effect of VSD on the ESP System
ESP Design Software
ESP Design Data Sheet
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Advanced
Applications
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Downhole
Monitoring
Systems
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
ESP
Components
Pumps
Pump Intakes
Protectors
Reda ESP Motors
Maximus* Components
Power Cable
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Pumps
Summary Table
Pump Nomenclature
Bolt-On Pump Discharge Heads
338 Series AN550 AN900 AN1200 AN1500 A2700N
387 Series D2400N D3050N D3400N D3500N D5850N
400 Series D475N D725N DN1100 D1400N DN1750 DN1800
DN2150 D2400N DN3000 DN3100 D3500N D4300N
D5800N
540 Series GN1600 GN2100 GN3200 GN4000 GN5200 G6200N
GN7000 GN10000 continued
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Pumps,
continued
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Pump Intakes
Standard Intakes
Vortex Gas Separators
Advanced Gas Handler
Poseidon*
Product Tables
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Protectors
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Motors
Standard Motors
Dominator* Motors
Maximus
Promotor
Product Tables
Bolt-On Motor Bases 375 Series Motors
456 Dominator Motors 540 Series Motors
562 Dominator Motors 738 Dominator Motors
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Maximus
Components
Motors
ProMotors
Protectors
Motorlead Extensions
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Power Cable
|} Main Menu Contents Search Help
REDA Electric Submersible
Pump Technology
ESP Catalog
Surface Power
and Control
|} Main Menu Contents Search Help
REDA
Electric Submersible
Pump Technology
ESP Catalog
Applying objectives
We are committed to proactively
integrating the following objectives
into Schlumberger operations world-
wide through the implementation of
management systems:
n ensure the quality of our products
and services
n protect the health, safety, and
property of our employees, clients,
contractors, and third parties
n protect the environment in the
communities where we work
and live.
QHSE
Quality, Health, Safety & Environment
practice the QHSE principles defined standards for achieving objectives. Improvement—mechanisms to
in these systems. n Contractor and Supplier promote continuous improvement
Both Q and HSE Management Management—methods to ensure and to ensure that activities con-
Systems include eight interrelated ele- that products and services provided form to defined standards.
ments monitored to ensure day-to-day by suppliers and contractors meet n Audits and Reviews—regular
conformance with standards that are applicable standards. verification of the implementation
corrected when necessary and continu- n Risk Management—continual and effectiveness of the Q and HSE
ously improved. evaluation process to identify haz- Management Systems.
n Commitment, Leadership, and ards, assess risk, and determine
Accountability—strong, visible man- appropriate means of prevention
agement commitment, leadership, and mitigation.
and personal involvement in QHSE,
including provision of necessary
resources.
Commitment, Leadership,
and Accountability
Policies
and Objectives Improvement
Organization
and Resources
Contractor and
Supplier Management
Correction
Risk
Management
Business
Processes
Performance Monitoring
Control
and Improvement
Audits
and Reviews
Application Engineering
Application Engineering
*Mark of Schlumberger
Application Engineering n Avocet Well and Surface Modeler © 2008 Schlumberger. All rights reserved.
Company Field
Contact Location
Phone Fax Date Run date
General Information
This well has a history of ❏ Sand % ❏ Scale ❏ Paraffin
❏ H2S % ❏ CO2 % ❏ Other
Electrical supply summary Primary supply voltage
❏ Three phase ❏ Single phase
Any other unique production characteristics with this location
General Information
This well has a history of ❏ Sand % ❏ Scale ❏ Paraffin
❏ H2S % ❏ CO2 % ❏ Other
Electrical supply summary Primary supply voltage
❏ Three phase ❏ Single phase
Any other unique production characteristics with this location
Applications
n Artificially lifted wells
Benefits
n Maximized production
n More efficient and cost-effective
operations
n Improved reliability
espWatcher
n Optimized future well placement
system
Features
n Alarms for systems out of tolerance
n Web-based hosting
n Wide variety of reporting
n Tracking and trending
n Expert analysis—artificial lift
and production
REDA Phoenix
pump monitoring
Intake pressure
2,000 40 2,000
Temperature, degF
Pressure, psi
200
30 1,500
Pressure, psi
1,500 150
20 1,000
1,000 100
10 500
500 50
0 0
Jan-18-07
Jan-19-07
Jan-20-07
Jan-21-07
Jan-22-07
Jan-23-07
Jan-24-07
Jan-25-07
Jan-26-07
Jan-27-07
Jan-28-07
Jan-29-07
Jan-30-07
Jan-31-07
Feb-01-07
Feb-02-07
Feb-03-07
Feb-04-07
Feb-05-07
0 0
Feb-17-07
Feb-24-07
Mar-03-07
Mar-10-07
Mar-17-07
Mar-24-07
Mar-31-07
Time
Time, d
1,000
100
10
1E-3 0:01 0:1 1 10
Time, h
Previous • Back
3,000
to Main Menu
REDA Hotline Systems
Applications
■ Wells with bottomhole tempera-
ture (BHT) to 425°F [218°C]
■ Installations with insufficient
motor cooling
• Gassy wells
• Low-production-rate wells
• Wells with emulsified fluids
Benefits
■ Extended ESP run life in high-
temperature applications
■ Expanded ESP application range
Features
■ High-temperature motor insula-
tion system
■ High-temperature 562 Dominator*
motor
■ Protector available with labyrinth
seal or high-temperature elasto-
meric bag configurations
■ High-temperature pump
■ High-temperature power cable
and motor lead extension
High-temperature wells
The REDA* Hotline* high-temperature
ESP system is designed to address the
special needs of high-temperature
wells produced by steamflood opera-
tions. Steam injection has been used
in many fields to improve mobility of
heavy oil and bitumen, which are
more difficult to recover than light
oil. Because more than two-thirds of
worldwide oil reserves are heavy oil,
the role of steamflood as a recovery
technique will likely play a much big-
ger role in fulfilling hydrocarbon
demands in the near future.
Applications The AGH gas handling device and the devices in conjunction with a variable
n Oil wells with too much gas volume Poseidon multiphase gas handling sys- speed drive and downhole monitoring
for conventional gas separation tem provide exceptional performance in system has proved effective in keeping
techniques high-GOR, subsea, or nonvented packer wells operating through unstable pump-
applications. When typical means of ing conditions such as CO2 floods and
n Oil-producing wells with non- operating an ESP in gassy applications water-alternating-gas (WAG) floods.
vented packers are not viable, the AGH and Poseidon
n CO2 floods systems can be used independently or
n in combination with gas separators to AGH system for gassy wells
Gas well dewatering
improve operations. This allows wells to The AGH advanced gas handling device is
n Gassy wells with deepset packers
be pumped at lower pressures and thus a highly modified, multistage, high-spe-
above the pump cific-speed centrifugal pump designed
increases production. Our gas handling
n Gas lift-to-ESP conversion wells specifically for the gassy ESP market.
devices have proved to stabilize produc-
n Subsea oil wells tion and minimize downtime due to Gassy wells are those having up to a 45%
gas locking. Utilizing the gas handling gas volume factor (GVF) at low intake
Benefits
n Increased production with fewer
gas locking production shutdowns
n Improved equipment run life
Features
n AGH* advanced gas handling
device:
• Mixed flow stage design
Figure 1
• Hydraulically balanced
construction
• Low pressure gas relief
impeller design
• Self-lubricating bearing system
n Poseidon™ multiphase gas han-
dling system:
• Axial flow, multiphase stage
design
• Hydraulic design to minimize
liquid-gas separation
• Self-lubricating bearing system
• 5530 and Ni-Resist stage
metallurgies Figure 2
Gas fraction
Poseidon gas handling for
increased production
Figure 3
Centrifugal pumps are mainly designed
to handle fluid and will suffer from
head degradation and gas locking in
the presence of high percentages of
free gas. The Poseidon system is a mul-
tiphase, axial flow gas handling device
installed below the main production Poseidon system
pump in oil wells with high gas cut to
allow efficient handling of higher per-
centages of free gas. The system can be Conventional
installed above a gas separator when Oil
gas-handling
gas can be vented into the casing, or production
system
it can be installed above a standard
intake if all the produced gas must go
through the pump.
Specifications
Applications
n Monitoring of beam/rod pumps
n Monitoring of PCPs
n Monitoring of gas lift system
and completion performance
n Identification and diagnosis
of wells with potential startup
or instability problems
n Identification of changing
productivity and sandface
conditions
n Improvement of reservoir
drainage and depletion
monitoring
Benefits
n Longer lift system run life
n Lower lift system operating costs
n Fewer early lift system failures
Features
n Adaptability to any artificial lift
system or application
n Accurate, continuous monitoring
of key parameters
n Compatibility with SCADA
systems using Modbus® protocol
n Programmable trip and alarm
relays for all monitored
parameters
n Analog outputs and inputs for
interfacing with older SCADA
systems
n Onsite historical data storage
Gauge Metrology
Specifications
Dimensions Length 22.44 in [570 mm]
OD 4.50 in; 3.75 in optional [114.30 mm; 96.25 mm optional]
Ratings Pressure 5,800 psi [39,990 kPa]
Temperature 257 degF [125 degC]
Insulation test rating 5,000 V DC
Materials Metallurgy Stainless steel AISI420
Elastomers As required
Surface equipment requirement High voltage coupling Surface choke
Data acquisition options UniConn universal site controller
MultiSensor XT Type 1
Description Length, ft [m] Part Number
Phoenix XT gauge assembly type 1 13CR Viton/AFLAS (A346) 22.4 [6.8] 100462067
© Schlumberger 2008
Downhole Monitoring n Phoenix Sensors *Mark of Schlumberger
Other company, product, and service names are the properties of their
respective owners.
Remote Sensor
Description Part Number
Phoenix Select, REDA 538/540, ST/ST Viton 100252035
Phoenix Select, REDA 400, ST/ST Viton 100260203
Phoenix Select, REDA 400, ST/ST AFLAS 100260204
Phoenix Select, REDA 562, ST/ST Viton 100260206
Phoenix Select, REDA 562, ST/ST AFLAS 100260207
Phoenix Select, REDA 675, ST/ST Viton 100260208
Phoenix Select, REDA 675, ST/ST AFLAS 100260209
Phoenix Select, REDA 538/540, ST/ST AFLAS 100260311
Hook-Up Kit
Description Part Number
Hook-up kit, Phoenix Select ESP remote sensor, AFLAS/HSN 100479872
Hook-up kit, Phoenix Select ESP remote sensor, Viton 100497796
© Schlumberger 2008
Downhole Monitoring n Phoenix Sensors *Mark of Schlumberger
Back to Pumps
Pump Summary—675 Series–1125 Series
Capacity Range,
Recommended Limits
Series OD, in. [mm] Pump Type 60 Hz, B/D 50 Hz, m3/d
J7000N 4,500–9,000 596–1,192
J12000N 8,000–18,500 1,060–2,451
675 6.75 [171.45]
JN16000 12,800–19,500 1,696–2,584
JN21000 16,000–25,000 2,120–3,312
L16000N 11,000–20,000 1,497–2,650
725 7.25 [184.15]
L43000N 36,000–54,000 4,770–7,155
M520A 12,000–20,000 1,590–3,180
M520B 12,000–23,000 1,590–3,047
M520C 12,000–22,000 1,590–2,915
862 8.62 [218.95]
M675A 19,000–32,000 2,517–4,306
M675B 19,000–29,000 2,517–3,842
M675C 19,000–28,000 2,517–3,710
N1050A 24,000–47,500 3,180–6,294
950 9.50 [241.30]
N1050B 24,000–43,000 3,180–5,697
N1400A 35,000–64,000 4,637–8,480
1000 10.00 [254.00]
N1400B 35,000–60,000 4,637–7,950
1125 11.25 [285.75] P2500A 53,486–96,001 7,087–12,720
Back to Pumps
Pump Nomenclature
Back to Pumps
Bolt-On Pump
Discharge Heads
338 Series
Part Number Description Length, ft [m] Weight, lbm [kg]
493015 2 3⁄8-in. [60.33-mm] OD 8rd EUE—Carbon steel 0.5 [0.15] 6 [2.7]
492223 2 3⁄8-in. [60.33-mm] OD 8rd EUE—Redalloy* alloy 0.5 [0.15] 4 [1.8]
400 Series
Part Number Description Length, ft [m] Weight, lbm [kg]
243485 2 ⁄8-in. [60.33-mm] OD 8rd EUE—Carbon steel
3
0.6 [0.18] 10 [4.5]
364240 2 3⁄8-in. [60.33-mm] OD 8rd EUE—Redalloy alloy 0.8 [0.24] 10 [4.5]
513/538 Series
Part Number Description Length, ft [m] Weight, lbm [kg]
194381 3 ⁄2-in. [88.90-mm] OD 8rd EUE—Carbon steel
1
0.8 [0.24] 22 [10.0]
492231 31⁄2-in. [88.90-mm] OD 8rd EUE—Redalloy alloy 0.8 [0.24] 21 [10.0]
562 Series
Part Number Description Length, ft [m] Weight, lbm [kg]
274795 31⁄2-in. [88.90-mm] OD 8rd EUE—Carbon steel 0.8 [0.24] 25 [11.3]
1048339 31⁄2-in. [88.90-mm] OD 8rd EUE—Redalloy alloy 0.8 [0.24] 25 [11.3]
675 Series
Part Number Description Length, ft [m] Weight, lbm [kg]
1006261 5 ⁄2-in. [139.70-mm] OD 8rd LTC—Carbon steel
1
0.8 [0.24] 30 [13.6]
997353 51⁄2-in. [139.70-mm] OD 8rd LTC—Redalloy alloy 0.8 [0.24] 33 [15.0]
725 Series
Part Number Description Length, ft [m] Weight, lbm [kg]
1311125 5 ⁄2-in. [139.70-mm] OD 8rd LTC—Carbon steel
1
0.8 [0.24] 45 [20.4]
Back to Pumps
AN550 Pump
Back to Pumps
AN550 Pump, 338 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 50 60 70 80 90 100
Housing of Stages
110 205 1 1
120 224 2
130 244 1 1
140 264 2
150 283 1 1
160 302 2
170 321 1 1
180 340† 2
190 360† 1 1
200 380† 2
210 396† 3
220 415† 2 1
230 434† 2 1
240 453† 3
250 472† 2 1
260 492† 2 1
270 510† 3
280 530† 2 1
290 550† 1 2
300 570† 3
310 585† 1 3
320 604† 4
Note: Stage counts are for FL-CT-ES pumps.
† Requiresuse of high-load bearing in protector
Back to Pumps
Pumps
Head
20 2.00 40
15 1.50 30
Head
(ft) Efficiency
10 1.00 20
Operating range
5 0.50 10
Power
0 0 0
0 100 200 300 400 500 600 700 800 900
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump AN550 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
25
65 Hz
20 60 Hz
55 Hz
Head 15
(ft) 50 Hz
10
0.20 70 Hz
65 Hz
0.15
Power 60 Hz
(hp)
0.10 55 Hz
50 Hz
0.05
0 100 200 300 400 500 600 700 800 900 1,000 1,100
Capacity (B/D)
Back to Pumps
Pumps
Head
4.00 2.00 40
Efficiency
3.00 1.50 30
Head
(m)
2.00 1.00 20
Operating range
1.00 0.50 10
Power
0 0 0
0 25 50 75 100 125
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump AN550 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
8.00 70 Hz
7.00 65 Hz
6.00 60 Hz
5.00 55 Hz
Head
(m) 50 Hz
4.00
3.00
2.00
1.00
0.20 70 Hz
0.15 65 Hz
Power 60 Hz
(hp)
0.10 55 Hz
50 Hz
0.05
Back to Pumps
AN900 Pump
Back to Pumps
AN900 Pump, 338 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 50 60 70 80 90 100
Housing of Stages
110 205 1 1
120 224 2
130 244 1 1
140 264 2
150 283 1 1
160 302 2
170 321 1 1
180 340† 2
190 359† 1 1
200 378† 2
210 396† 3
220 415† 2 1
230 434† 2 1
240 453† 3
250 472† 2 1
260 491† 2 1
270 510† 3
280 529† 2 1
290 548† 1 2
300 567† 3
310 585† 1 3
320 604† 4
330 623† 3 1
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
Back to Pumps
Pumps
25 Efficiency 1.25 50
Head
20 1.00 40
Operating range
Head 15 0.75 30
(ft)
10 0.50 20
5 0.25 10
Power
0 0 0
0 250 500 750 1,000 1,250 1,500
Capacity (B ⁄ D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump AN900 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
25
70 Hz
20 65 Hz
60 Hz
Head 15
(ft) 55 Hz
50 Hz
10
70 Hz
0.20
65 Hz
0.15
60 Hz
Power
(hp) 55 Hz
0.10
50 Hz
0.05
Back to Pumps
Pumps
Head
4.00 1.00 40
Operating range
2.00 0.50 20
1.00 0.25 10
Power
0 0 0
0 25 50 75 100 125 150 175 200
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump AN900 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
8.00
7.00 70 Hz
6.00 65 Hz
60 Hz
5.00
Head
(m) 55 Hz
4.00
50 Hz
3.00
2.00
1.00
70 Hz
0.20
65 Hz
0.15 60 Hz
Power
(hp) 55 Hz
0.10
50 Hz
0.05
Back to Pumps
AN1200 Pump
Back to Pumps
AN1200 Pump, 338 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 50 60 70 80 90 100
Housing of Stages
110 170 1 1
120 186 2
130 201 1 1
140 216 2
150 232 1 1
160 248 2
170 264 1 1
180 280 2
190 296 1 1
200 312 2
210 324 3
220 340 2 1
230 356† 2 1
240 372† 3
250 388† 2 1
260 404† 2 1
270 420† 3
280 436† 2‡ 1‡
290 452† 1‡ 2‡
300 468† 3‡
310 480† 1‡ 3‡
320 496† 4‡
330 512† 3‡ 1‡
340 528† 3‡ 1‡
350 544† 1‡ 3‡
360 560† 4‡
370 576† 3‡ 1‡
380 592† 1‡ 3‡
390 608† 1‡ 3‡
400 624† 4‡
410 636† 2‡ 3‡
420 652† 1‡ 1‡ 3‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
25 Efficiency 1.25 50
Head
20 1.00 40
Operating range
Head 15 0.75 30
(ft)
10 0.50 20
5 0.25 10
Power
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000
Capacity (B ⁄ D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump AN1200 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
25
70 Hz
65 Hz
20
60 Hz
Head 15 55 Hz
(ft)
50 Hz
10
0.35 70 Hz
0.30
65 Hz
0.25
60 Hz
Power 0.20
(hp) 55 Hz
0.15
50 Hz
0.10
0.05
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500
Capacity (B/D)
Back to Pumps
Pumps
Head
4.00 1.00 40
Operating range
2.00 0.50 20
1.00 0.25 10
Power
0 0 0
0 25 50 75 100 125 150 175 200 225 250 275
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump AN1200 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
8.00
70 Hz
7.00
65 Hz
6.00
60 Hz
5.00
Head
55 Hz
(m)
4.00
50 Hz
3.00
2.00
1.00
0.35 70 Hz
0.30
65 Hz
0.25
60 Hz
Power 0.20
(hp) 55 Hz
0.15
50 Hz
0.10
0.05
Back to Pumps
AN1500 Pump
Back to Pumps
AN1500 Pump, 338 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 50 60 70 80 90 100
Housing of Stages
110 133 1 1
120 146 2
130 158 1 1
140 170 2
150 183 1 1
160 196 2
170 208 1 1
180 220 2
190 233 1 1
200 246 2
210 255 3
220 268 2 1
230 280 2 1
240 294 3
250 306 2 1
260 319 2 1
270 330 3
280 343† 2 1
290 356† 1 2
300 369† 3
310 379† 1 3
320 392† 4‡
330 404† 3‡ 1‡
340 417† 3‡ 1‡
350 428† 1‡ 3‡
360 440† 4‡
370 453† 3‡ 1‡
380 467† 1‡ 3‡
390 479† 1‡ 3‡
400 492† 4‡
410 502† 4‡ 1‡
420 514† 3‡ 2‡
430 526† 2‡ 3‡
440 538† 1‡ 4‡
450 550† 5‡
460 563† 4‡ 1‡
470 576† 3‡ 2‡
480 589† 2‡ 3‡
490 602† 1‡ 4‡
500 615† 5‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 1,000–2,000 B/D Shaft brake-power limit Standard 125 hp
Nominal housing diameter 3.38 in. High strength 200 hp
Shaft diameter 0.688 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.371 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 4.500 in. Welded 6,000 psi (hp) (%)
20 Efficiency 2.00 40
Head
Operating range
15 1.50 30
Head
(ft)
10 1.00 20
5 0.50 10
Power
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 2,750
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump AN1500 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
22.50
70 Hz
20.00
65 Hz
17.50
60 Hz
15.00
Head 55 Hz
(ft) 12.50
50 Hz
10.00
7.50
5.00
2.50
0.50 70 Hz
0.45
0.40 65 Hz
0.35
0.30 60 Hz
Power
(hp) 0.25 55 Hz
0.20 50 Hz
0.15
0.10
0.05
Capacity (B/D)
Back to Pumps
Pumps
4.00 2.00 40
Head
Operating range
3.00 1.50 30
Head
(m) Efficiency
2.00 1.00 20
1.00 0.50 10
Power
0 0 0
0 50 100 150 200 250 300 350 400
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump AN1500 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
6.00
65 Hz
5.00
60 Hz
4.00 55 Hz
Head 50 Hz
(m) 3.00
2.00
1.00
0.50 70 Hz
0.45
0.40 65 Hz
0.35
0.30 60 Hz
Power 0.25 55 Hz
(hp) 0.20 50 Hz
0.15
0.10
0.05
0 50 100 150 200 250 300 350 400 450 500 550
Capacity (m /d)
3
Back to Pumps
A2700N Pump
Back to Pumps
A2700N Pump, 338 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 84† 2
170 90† 1 1
180 95† 1 1
190 101† 1 1
200 106† 2
210 112† 1 1
220 118† 2
230 123† 1 1
240 128† 2
250 134† 1 1
260 140† 2
270 145† 1 1
280 150† 2
290 156† 1 1
300 162† 2
310 165† 2 1
320 171† 1 2
330 177† 3
340 182† 2 1
350 187† 1 2
360 192† 3
370 198† 2 1
380 204† 1 2
390 210† 3
400 215† 2 1
410 220† 1 2
420 225† 3
430 231† 2 1
440 237† 1 2
450 243† 3
460 245† 1 3
470 251† 1 3
480 256† 4
490 262† 3‡ 1‡
500 267† 3‡ 1‡
510 274† 1‡ 3‡
520 280† 4‡
530 285† 3‡ 1‡
540 291† 3‡ 0‡ 1‡
550 296† 2‡ 1‡ 1‡
560 302†, § 2‡ 0‡ 2‡
570 307†, § 1‡ 1‡ 2‡
580 312† 2‡ 2‡
590 318†, § 1‡ 3‡
600 324†, § 4‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector for compression pumps
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 1,800–3,400 B/D Shaft brake-power limit Standard 125 hp
Nominal housing diameter 3.38 in. High strength 200 hp
Shaft diameter 0.688 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.371 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 4.500 in. Welded 6,000 psi (hp) (%)
30 3.00 60
Operating range
25 2.50 50
Head
20 2.00 40
Head
(ft)
15 1.50 30
Efficiency
10 1.00 20
5 Power 0.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump A2700N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
30
70 Hz
25
65 Hz
20
60 Hz
Head
(ft) 55 Hz
15
50 Hz
10
0.70 70 Hz
0.60
65 Hz
0.50
60 Hz
Power 0.40
(hp) 55 Hz
0.30
50 Hz
0.20
0.10
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (B/D)
Back to Pumps
Pumps
6.00 3.00 60
5.00 2.50 50
Head
4.00 2.00 40
Head
(m) Efficiency
3.00 1.50 30
2.00 1.00 20
Operating range
1.00 0.50 10
Power
0 0 0
0 50 100 150 200 250 300 350 400 450 500 550
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump A2700N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
8.00
70 Hz
7.00
65 Hz
6.00
60 Hz
5.00
55 Hz
Head
(m)
4.00 50 Hz
3.00
2.00
1.00
0.70 70 Hz
0.60
65 Hz
0.50
60 Hz
Power 0.40
(hp) 55 Hz
0.30
50 Hz
0.20
0.10
Back to Pumps
D2400N Pump
Back to Pumps
D3050N Pump
Back to Pumps
Advanced Designs—387 Series, Min. Casing Size 5 1⁄2-in. [139.7-mm] OD
Housing Length, Weight, Max. Part Number Configuration Housing Integral Integral
ft [m] lbm [kg] Stages Material Intake AGH* Device
130 19.0 [5.8] 504 [229] 95 100149448 C-UT-ES1† Carbon steel
150 21.8 [6.7] 577 [262] 99 100204009 C-CT-ES1† Carbon steel Yes
150 21.8 [6.7] 577 [262] 99 100123022 C-LT-ES1† Carbon steel Yes Yes
150 21.8 [6.7] 577 [262] 99 100204063 C-CT-ES1† Redalloy* alloy Yes
150 21.8 [6.7] 577 [262] 99 100169384 C-LT-ES1† Redalloy alloy Yes Yes
† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely,
if this pump type is mated with nonfactory-shimmed equipment, the field shimming procedures must be followed.
Back to Pumps
Pumps
Optimum operating range 2,000–3,700 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 3.87 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.601 in.2 Buttress 4,800 psi Power Efficiency
Min. casing size 5.5 in. Welded 4,800 psi (hp) (%)
Head
30 3.00 60
25 2.50 50
Efficiency
20 2.00 40
Head
(ft)
15 1.50 30
Operating range
10 1.00 20
Power
5 0.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D3050N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
45
40
70 Hz
35
65 Hz
30
60 Hz
Head 25
(ft) 55 Hz
20
50 Hz
15
10
70 Hz
1.00
65 Hz
0.75 60 Hz
Power
(hp) 55 Hz
0.50
50 Hz
0.25
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500
Capacity (B/D)
Back to Pumps
Pumps
7.00 3.50 70
Head
6.00 3.00 60
5.00 2.50 50
Efficiency
Head 4.00 2.00 40
(m)
3.00 1.50 30
Operating range
2.00 1.00 20
0 0 0
0 100 200 300 400 500 600
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D3050N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
12.50
70 Hz
10.00 65 Hz
60 Hz
Head 7.50
(m) 55 Hz
50 Hz
5.00
2.50
70 Hz
10.00
65 Hz
7.50 60 Hz
Power
55 Hz
(hp) 5.00
50 Hz
2.50
Back to Pumps
D3400N Pump
Back to Pumps
Advanced Designs—387 Series, Min. Casing Size 5 1⁄2-in. [139.7-mm] OD
Housing Length, Weight, Max. Part Number Configuration Housing Integral Integral
ft [m] lbm [kg] Stages Material Intake AGH* Device
50 7.9 [2.4] 205 [93] 27 100163980 C-UT-ES1† Carbon steel
130 19.0 [5.8] 504 [229] 72 100138337 C-UT-ES1† Carbon steel
150 21.8 [6.7] 577 [262] 80 100188486 C-CT-ES1† Carbon steel Yes
150 21.8 [6.7] 577 [262] 80 100174910 C-LT-ES1† Carbon steel Yes Yes
150 21.8 [6.7] 577 [262] 80 100188508 C-CT-ES1† Redalloy* alloy Yes
150 21.8 [6.7] 577 [262] 80 100174920 C-LT-ES1† Redalloy alloy Yes Yes
† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely,
if this pump type is mated with nonfactory-shimmed equipment, the field shimming procedures must be followed.
Back to Pumps
Pumps
Optimum operating range 2,400–4,400 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 3.87 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.601 in.2 Buttress 4,800 psi Power Efficiency
Min. casing size 5.500 in. Welded Not applicable (hp) (%)
30 3.00 60
Head
Operating range
25 2.50 50
20 2.00 40
Head
(ft) Efficiency
15 1.50 30
10 1.00 20
Power
5 0.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D3400N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
35
70 Hz
30
65 Hz
25
60 Hz
Head
(ft)
20 55 Hz
50 Hz
15
10
1.25 70 Hz
1.00 65 Hz
60 Hz
Power 0.75
(hp)
55 Hz
0.50 50 Hz
0.25
Back to Pumps
Pumps
Head
6.00 3.00 60
Operating range
5.00 2.50 50
4.00 2.00 40
Head Efficiency
(m)
3.00 1.50 30
2.00 1.00 20
1.00 0.50 10
Power
0 0 0
0 100 200 300 400 500 600 700
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D3400N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
10.00
65 Hz
60 Hz
7.50
Head 55 Hz
(m)
50 Hz
5.00
2.50
1.25 70 Hz
1.00 65 Hz
60 Hz
Power 0.75
(hp) 55 Hz
0.50 50 Hz
0.25
0 100 200 300 400 500 600 700 800 900 1,000
Capacity (m3/d)
Back to Pumps
D3500N Pump
ES Carbon Steel
Housing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT-ES
Part Number
30 4.9 [1.5] 105 [48] 17 tba†
40 6.3 [1.9] 135 [61] 23 tba
50 7.8 [2.4] 166 [75] 29 tba
60 9.2 [2.8] 196 [89] 36 tba
70 10.6 [3.2] 226 [103] 42 tba
80 12.0 [3.7] 257 [117] 48 100351131
90 13.4 [4.1] 287 [130] 54 100351132
100 15.0 [4.6] 318 [145] 60 100351133
110 16.2 [4.9] 348 [158] 66 100351134
120 17.6 [5.4] 378 [172] 72 100351135
130 19.0 [5.8] 401 [182] 79 100351136
140 20.6 [6.3] 438 [199] 85 100351137
150 22.0 [6.7] 477 [217] 91 100351138
† to be assigned
ES Carbon Steel
Housing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT-ES
Part Number
30 4.9 [1.5] 105 [48] 17 tba†
40 6.3 [1.9] 135 [61] 23 tba
50 7.8 [2.4] 166 [75] 29 tba
60 9.2 [2.8] 196 [89] 35 tba
70 10.6 [3.2] 226 [103] 41 tba
80 12.0 [3.7] 257 [117] 48 100352488
90 13.4 [4.1] 287 [130] 54 100352489
100 15.0 [4.6] 318 [145] 60 100352490
110 16.2 [4.9] 348 [158] 66 100352491
120 17.6 [5.4] 378 [172] 72 100352492
130 19.0 [5.8] 401 [182] 78 100352493
140 20.6 [6.3] 438 [199] 84 100352494
150 22.0 [6.7] 477 [217] 91 100352495
† to be assigned
Back to Pumps
387 Series, Min. Casing Size 5-in (127-mm) OD
Back to Pumps
D3500N, 387 Series, Tandem Configurations
160 86 2
170 102 1 1
180 108 2
190 114 1 1
200 120 2
210 126 1 1
220 132 2
230 138 1 1
240 144 2
250 151 1 1
260 158 2
270 164 1 1
280 170 2
290 176 1 1
300 182 2
310 186 2 1
320 192 1 2
330 198 3
340 204 2 1
350 210 1 2
360 216 3
370 223 2 1
380 230 1 2
390 237 3
400 243 2 1
410 249 1 2
420 255 3
430 261 2 1
440 267 1 2
450 273 3
460 278 2 2
470 284 1 1 2
480 290 2 2
490 296 1 1 2
500 302 2 2
510 308 1 1 2
520 314 2 2
530 320 1 1 2
540 326 2 2
Back to Pumps
Pumps REDA* ESP D3500 Pump Performance Curve 50 Hz, 2,917 rpm
Curve computed for one stage in fluid of 1.00 sg.
n
Head
6.00 3.00 60
5.00 2.50 50
Efficiency
4.00 2.00 40
Head,
m
3.00 1.50 30
Operating range
2.00 1.00 20
1.00 0.50 10
Power
0 0 0
0 100 200 300 400 500 600 700 800
Capacity, m3⁄d
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D3500N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
45
70 Hz
40
65 Hz
35
60 Hz
30
55 Hz
Head,
25
ft
50 Hz
20
15
10
70 Hz
1.75
1.50 65 Hz
1.25
60 Hz
Power, 1.00
hp 55 Hz
0.75
50 Hz
0.50
0.25
Back to Pumps
REDA* ESP D3500N Pump Performance Curve 60 Hz, 3,500 rpm
Curve computed for one stage in fluid of 1.00 sg.
Optimum operating range 2,400–4,500 bbl/d Shaft brake-power limit Standard 316 hp
Nominal housing diameter 3.870 in High-strength 492 hp
Shaft diameter 0.870 in Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.601 in2 Buttress 6,000 psi Power, Efficiency,
Min. casing size 5.000 in Welded Not applicable hp %
Head
30 3.00 60
25 2.50 50
20 2.00 40
Head, Efficiency Operating range
ft
15 1.50 30
10 1.00 20
Power
5 0.50 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000
Capacity, bbl/d
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
ESP Catalog
Back to Pumps
D5850N Pump
Back to Pumps
Advanced Designs—387 Series, Min. Casing Size 5 1⁄2-in. [139.7-mm] OD
Housing Length, Weight, Max. Part Number Configuration Housing Integral Integral
ft [m] lbm [kg] Stages Material Intake AGH* Device
40 6.3 [1.92] 168 [76] 17 100138401 C-UT-ES1† Carbon steel
150 21.8 [6.65] 577 [262] 67 100131226 C-UT-ES1† Carbon steel
150 21.8 [6.65] 577 [262] 67 100188076 C-CT-ES1† Carbon steel Yes
150 21.8 [6.65] 577 [262] 67 100096754 C-LT-ES1† Carbon steel Yes Yes
150 21.8 [6.65] 577 [262] 67 100188089 C-CT-ES1† Redalloy* alloy Yes
150 21.8 [6.65] 577 [262] 67 100166317 C-LT-ES1† Redalloy alloy Yes Yes
† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely,
if this pump type is mated with nonfactory-shimmed equipment, the field shimming procedures must be followed.
Back to Pumps
Pumps
Optimum operating range 4,400–7,000 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 3.87 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.601 in.2 Buttress 4,800 psi Power Efficiency
Min. casing size 5.500 in. Welded Not applicable (hp) (%)
35 3.50 70
Efficiency
30 3.00 60
Head Operating range
25 2.50 50
Head 20 2.00 40
(ft)
15 1.50 30
10 Power 1.00 20
5 0.50 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D5850N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
35
70 Hz
30 65 Hz
25 60 Hz
Head
(ft) 55 Hz
20
50 Hz
15
10
2.25 70 Hz
2.00
1.75 65 Hz
1.50
60 Hz
Power 1.25
(hp) 55 Hz
1.00
50 Hz
0.75
0.50
0.25
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Capacity (B/D)
Back to Pumps
Pumps
7.00 3.50 70
6.00 3.00 60
Head
5.00 2.50 50
3.00 1.50 30
Operating range
2.00 1.00 20
Power
1.00 0.50 10
0 0 0
0 100 200 300 400 500 600 700 800 900 1,000 1,1 00
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D5850N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
10.00
65 Hz
7.50 60 Hz
Head 55 Hz
(m)
50 Hz
5.00
2.50
2.25 70 Hz
2.00
1.75 65 Hz
1.50
60 Hz
Power 1.25
(hp) 55 Hz
1.00
50 Hz
0.75
0.50
0.25
Back to Pumps
D475N Pump
Back to Pumps
D475N Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
130 230 1 1
140 248 2
150 266 1 1
160 284 2
170 302 1 1
180 320 2
190 338 1 1
200 356† 2
210 374† 1 1
220 392† 2
230 410† 1 1
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of buttress threads in uppermost pump
Back to Pumps
Pumps
50 1.25 50
40 1.00 40
Operating range
Head
Head 30 0.75 30
(ft)
Efficiency
20 0.50 20
10 0.25 10
Power
0 0 0
0 100 200 300 400 500 600 700 800
Capacity (B ⁄ D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D475N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
40
65 Hz
35
60 Hz
30
55 Hz
25
Head
(ft) 50 Hz
20
15
10
70 Hz
0.25
65 Hz
0.20
60 Hz
Power 0.15
(hp) 55 Hz
0.10 50 Hz
0.05
0 100 200 300 400 500 600 700 800 900 1,000
Capacity (B/D)
Back to Pumps
Pumps
12.50 1.25 50
10.00 1.00 40
Operating range
Efficiency
Head 7.50 0.75 30
(m) Head
5.00 0.50 20
2.50 0.25 10
Power
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D475N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
12.50
65 Hz
10.00 60 Hz
55 Hz
Head
7.50
(m)
50 Hz
5.00
2.50
70 Hz
0.25
65 Hz
0.20
60 Hz
Power 0.15
(hp) 55 Hz
0.10 50 Hz
0.05
Back to Pumps
D725N Pump
Back to Pumps
D725N Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
130 258 1 1
140 278 2
150 298 1 1
160 318 2
170 338 1 1
180 358† 2
190 378† 1 1
200 398† 2
210 418† 1 1
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of buttress threads in uppermost pump
Back to Pumps
Pumps
60 1.50 60
50 1.25 50
20 0.50 20
10 0.25 10
Power
0 0 0
0 100 200 300 400 500 600 700 800 900 1,000 1,100
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D725N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
40
65 Hz
35
60 Hz
30
55 Hz
25
Head
(ft) 50 Hz
20
15
10
70 Hz
0.30
65 Hz
0.25
0.20 60 Hz
Power
(hp) 55 Hz
0.15
50 Hz
0.10
0.05
Back to Pumps
Pumps
15.00 1.50 60
12.50 1.25 50
Efficiency
10.00 Operating range 1.00 40
Head
(m)
7.50 0.75 30
Head
5.00 0.50 20
2.50 0.25 10
Power
0 0 0
0 25 50 75 100 125 150
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D725N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
12.50 70 Hz
65 Hz
10.00
60 Hz
Head 55 Hz
(m) 7.50
50 Hz
5.00
2.50
70 Hz
0.30
65 Hz
0.25
0.20 60 Hz
Power
(hp) 55 Hz
0.15
50 Hz
0.10
0.05
Back to Pumps
DN1100 Pump
Back to Pumps
DN1100 Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
130 239 1 1
140 258 2
150 277 1 1
160 296 2
170 314 1 1
180 332 2
190 351 1 1
200 370 2
210 389† 1 1
220 408† 2
230 426† 1‡ 1‡
240 444† 2‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of buttress threads in uppermost pump
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 600–1,350 B/D Shaft brake-power limit Standard 125 hp
Nominal housing diameter 4.00 in. High strength 200 hp
Shaft diameter 0.688 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.371 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
30 3.00 60
Head
25 2.50 50
20 2.00 40
Efficiency
Head
(ft)
Operating range
15 1.50 30
10 1.00 20
5 0.50 10
Power
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN1100 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
70 Hz
35
65 Hz
30
60 Hz
25
Head 55 Hz
(ft)
20 50 Hz
15
10
0.45 70 Hz
0.40
65 Hz
0.35
0.30 60 Hz
Power 0.25
(hp) 55 Hz
0.20
50 Hz
0.15
0.10
0.05
Back to Pumps
Pumps
6.00 3.00 60
Head
5.00 2.50 50
4.00 2.00 40
Head Operating range
(m)
3.00 1.50 30
Efficiency
2.00 1.00 20
1.00 0.50 10
Power
0 0 0
0 25 50 75 100 125 150 175 200 225
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN1100 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
12.50
70 Hz
10.00 65 Hz
60 Hz
Head
(m) 7.50
55 Hz
50 Hz
5.00
2.50
0.45 70 Hz
0.40
0.35 65 Hz
0.30 60 Hz
Power 0.25
(hp) 55 Hz
0.20
50 Hz
0.15
0.10
0.05
Back to Pumps
D1400N Pump
Back to Pumps
D1400N Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
130 239 1 1
140 258 2
150 276 1 1
160 294 2
170 313 1 1
180 332 2
190 351 1 1
200 370† 2‡
210 387† 1‡ 1‡
220 404† 2‡
230 423† 1‡ 1‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of buttress threads in uppermost pump
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 960–1,700 B/D Shaft brake-power limit Standard 125 hp
Nominal housing diameter 4.00 in. High strength 200 hp
Shaft diameter 0.688 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.371 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
30 Head 3.00 60
25 2.50 50
20 2.00 40
Head Efficiency
(ft)
15 1.50 30
Operating range
10 1.00 20
5 0.50 10
Power
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D1400N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
35 70 Hz
30 65 Hz
60 Hz
25
Head
(ft) 55 Hz
20
50 Hz
15
10
0.50 70 Hz
0.40 65 Hz
Power 60 Hz
0.30
(hp)
55 Hz
0.20 50 Hz
0.10
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500
Capacity (B/D)
Back to Pumps
Pumps
Head
6.00 3.00 60
5.00 2.50 50
4.00 2.00 40
Head Efficiency
(m)
3.00 1.50 30
2.00 1.00 20
Operating range
1.00 0.50 10
Power
0 0 0
0 25 50 75 100 125 150 175 200 225 250 275
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D1400N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
12.50
70 Hz
10.00
65 Hz
Head 60 Hz
7.50
(m)
55 Hz
50 Hz
5.00
2.50
0.50 70 Hz
0.40 65 Hz
60 Hz
Power 0.30
(hp) 55 Hz
0.20 50 Hz
0.10
Capacity (m3/d)
Back to Pumps
DN1750 Pump
Back to Pumps
DN1750 Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 134 2
170 142 1 1
180 150 1 1
190 158 1 1
200 166 2
210 175 1 1
220 184 2
230 192 1 1
240 200 2
250 208 1 1
260 216 2
270 224 1 1
280 232 2
290 241 1 1
300 250 2
310 258 2 1
320 267 1 2
330 276 3
340 284† 2 1
350 292† 1 2
360 300† 3
370 308† 2 1
380 316† 1 2
390 324† 3
400 332† 2 1
410 340† 1‡ 2‡
420 348† 3‡
430 357† 2‡ 1‡
440 366† 1‡ 2‡
450 375†, § 3‡
460 383†, § 1‡ 3‡
470 392†, § 1‡ 3‡
480 400†, § 4‡
490 408†, § 3‡ 1‡
500 416†, § 3‡ 1‡
510 424†, § 1‡ 3‡
520 432†, § 4‡
530 440†, § 3‡ 1‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of buttress threads in uppermost pump
Back to Pumps
Pumps
Optimum operating range 1,200–2,050 B/D Shaft brake-power limit Standard 125 hp
Nominal housing diameter 4.00 in. High strength 200 hp
Shaft diameter 0.688 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.371 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
30 3.00 60
Head
Operating range
25 2.50 50
20 2.00 40
Head
Efficiency
(ft)
15 1.50 30
10 1.00 20
5 0.50 10
Power
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN1750 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
35
70 Hz
30 65 Hz
25 60 Hz
Head
(ft) 55 Hz
20
50 Hz
15
10
70 Hz
0.50
65 Hz
0.40
60 Hz
Power 0.30
(hp) 55 Hz
0.20 50 Hz
0.10
Back to Pumps
Pumps
Head
6.00 3.00 60
Operating range
5.00 2.50 50
4.00 2.00 40
Head Efficiency
(m)
3.00 1.50 30
2.00 1.00 20
1.00 0.50 10
Power
0 0 0
0 50 100 150 200 250 300 350
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN1750 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
12.50
70 Hz
10.00
65 Hz
Head 60 Hz
(m) 7.50
55 Hz
50 Hz
5.00
2.50
70 Hz
0.50
65 Hz
0.40
60 Hz
Power
(hp) 0.30
55 Hz
0.20 50 Hz
0.10
Back to Pumps
DN1800 Pump
Back to Pumps
DN1800 Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
130 176 1 1
140 190 2
150 203 1† 1†
160 216 2†
170 230 1† 1†
180 244 2†
190 258 1† 1†
200 272 2†
210 286‡ 1† 1†
220 300‡ 2†
230 313‡ 1† 1†
240 326‡ 2†
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-strength shaft in lowermost pump
‡ Requires use of high-load bearing in protector
Back to Pumps
Pumps
Optimum operating range 1,200–2,400 B/D Shaft brake-power limit Standard 125 hp
Nominal housing diameter 4.00 in. High strength 200 hp
Shaft diameter 0.688 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.371 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
35 1.75 70
30 1.50 60
Head
Operating range
25 1.25 50
Head 20 1.00 40
(ft) Efficiency
15 0.75 30
10 0.50 20
Power
5 0.25 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN1800 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
35
70 Hz
30 65 Hz
25 60 Hz
Head
(ft) 55 Hz
20
50 Hz
15
10
0.50 70 Hz
0.40 65 Hz
Power 60 Hz
0.30
(hp)
55 Hz
0.20 50 Hz
0.10
Capacity (B/D)
Back to Pumps
Pumps
7.00 1.75 70
Head
6.00 1.50 60
Operating range
5.00 1.25 50
2.00 0.50 20
1.00 0.25 10
Power
0 0 0
0 50 100 150 200 250 300 350 400
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN1800 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
12.50
70 Hz
10.00
65 Hz
Head 60 Hz
(m) 7.50
55 Hz
50 Hz
5.00
2.50
0.50 70 Hz
0.40 65 Hz
Power 60 Hz
0.30
(hp)
55 Hz
0.20 50 Hz
0.10
0 50 100 150 200 250 300 350 400 450 500 550
Capacity (m3/d)
Back to Pumps
DN2150 Pump
Back to Pumps
DN2150 Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
130 176 1 1
140 190 2
150 203 1† 1†
160 216 2†
170 230 1† 1†
180 244 2†
190 258 1† 1†
200 272 2†
210 286‡ 1† 1†
220 300‡ 2†
230 313‡ 1† 1†
240 326‡ 2†
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-strength shaft in lowermost pump
‡ Requires use of high-load bearing in protector
Back to Pumps
Pumps
Optimum operating range 1,300–2,600 B/D Shaft brake-power limit Standard 125 hp
Nominal housing diameter 4.00 in. High strength 200 hp
Shaft diameter 0.688 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.371 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
60 3.00 60
50 2.50 50
Efficiency
20 1.00 20
10 Power 0.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN2150 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40 70 Hz
35 65 Hz
30 60 Hz
25 55 Hz
Head
(ft) 50 Hz
20
15
10
70 Hz
0.90
0.80
65 Hz
0.70
0.60 60 Hz
Power 0.50
(hp) 55 Hz
0.40
50 Hz
0.30
0.20
0.10
Back to Pumps
Pumps
15.00 1.50 60
12.50 1.25 50
Efficiency
10.00 1.00 40
Head Operating range
(m)
7.50 0.75 30
Head
5.00 0.50 20
Power
2.50 0.25 10
0 0 0
0 50 100 150 200 250 300 350 400 450
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN2150 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
12.50 70 Hz
65 Hz
10.00
60 Hz
Head 55 Hz
(m) 7.50
50 Hz
5.00
2.50
70 Hz
0.90
0.80
65 Hz
0.70
0.60 60 Hz
Power 0.50
(hp) 55 Hz
0.40
50 Hz
0.30
0.20
0.10
Back to Pumps
D2400N Pump
Back to Pumps
400 Series, Min. Casing Size 51⁄2-in. [139.7-mm] OD
ARZ Carbon Steel ARZ Redalloy* Alloy
Housing Length, Weight, Max. CR-CT † Max. CR-CT †
ft [m] lbm [kg] Stages Part Number Stages Part Number
10 2.1 [0.64] 45 [20.4] 6 100258448 6 100258876
20 3.5 [1.07] 75 [34.1] 14 100258449 14 100258877
30 4.9 [1.49] 105 47.7] 22 100258450 22 100258878
40 6.3 [1.92] 135 [61.3] 30 100258451 30 100258879
50 7.7 [2.35] 165 [74.9] 38 100258452 38 100258881
60 9.1 [2.78] 195 [88.5] 46 100258454 46 100258882
70 10.5 [3.20] 225 [102.2] 53 100258455 53 100258883
80 11.9 [3.63] 255 [115.8] 62 100258458 62 100258884
90 13.3 [4.06] 285 129.4] 70 100258459 70 100258885
100 14.7 [4.48] 315 [143.0] 78 100258460 78 100258886
110 16.1 [4.91] 345 [156.6] 86 100258461 86 100258887
120 17.5 [5.34] 375 [170.3] 93 100258462 93 100258888
130 18.9 [5.76] 405 [183.9] 102 100258463 102 100258889
140 20.3 [6.19] 435 [197.5] 109 100258464 109 100258890
150 21.7 [6.62] 465 [211.1] 117 100258465 117 100258891
† Thisfactory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment,
no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field shimming procedures must be followed.
Back to Pumps
Pumps
Optimum operating range 1,500–3,200 B/D Shaft brake-power limit Standard 162 hp
Nominal housing diameter 4.00 in. High strength 245 hp
Shaft diameter 0.688 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.371 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
60 3.00 60
Efficiency
50 2.50 50
Operating range
40 2.00 40
Head
(ft) Head
30 1.50 30
20 1.00 20
Power
10 0.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D2400N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
50
45
70 Hz
40
35 65 Hz
30 60 Hz
Head
(ft) 25 55 Hz
50 Hz
20
15
10
70 Hz
1.00
65 Hz
0.75
60 Hz
Power
(hp) 55 Hz
0.50
50 Hz
0.25
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (B/D)
Back to Pumps
Pumps
15.00 3.00 60
Efficiency
12.50 2.50 50
Operating range
10.00 2.00 40
Head
(m)
7.50 Head 1.50 30
5.00 1.00 20
2.50 0.50 10
Power
0 0 0
0 50 100 150 200 250 300 350 400 450 500 550
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D2400N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
15.00
12.50 70 Hz
65 Hz
10.00
60 Hz
Head
(m)
55 Hz
7.50
50 Hz
5.00
2.50
70 Hz
1.00
65 Hz
0.75
60 Hz
Power
(hp) 55 Hz
0.50
50 Hz
0.25
Back to Pumps
DN3000 Pump
Back to Pumps
DN3000 Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 118 2
170 125 1 1
180 132 1 1
190 140 1 1
200 148 2
210 155 2 1
220 162 2
230 170 1 2
240 178 2
250 185† 1 1
260 192† 2
270 200† 1 1
280 208† 2
290 215† 1 1
300 222† 2
310 229† 2 1
320 236† 1 2
330 243† 3
340 251† 2 1
350 259† 1 2
360 267† 3
370 274† 2 1
380 281† 1 2
390 288† 3
400 296† 2 1
410 304† 1 2
420 312† 3
430 319† 2 1
440 326† 1 2
450 333† 3
460 341† 1 3
470 348† 1 3
480 356† 4
490 363† 3 1
500 369† 3 1
510 377† 1 3
520 384†, ‡ 4
530 392†, ‡ 3§ 1§
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
Back to Pumps
Pumps
Optimum operating range 2,100–3,700 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 4.00 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.601 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
30 Head 3.00 60
Operating range
25 2.50 50
20 2.00 40
Head Efficiency
(ft)
15 1.50 30
10 1.00 20
Power
5 0.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN3000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
35
70 Hz
30 65 Hz
25 60 Hz
55 Hz
Head 20
(ft) 50 Hz
15
10
1.00
70 Hz
0.90
65 Hz
0.80
0.70 60 Hz
0.60
Power 55 Hz
0.50
(hp)
0.40 50 Hz
0.30
0.20
0.10
Back to Pumps
Pumps
Head
6.00 3.00 60
Operating range
5.00 2.50 50
4.00 2.00 40
Efficiency
Head
(m)
3.00 1.50 30
2.00 1.00 20
1.00 0.50 10
Power
0 0 0
0 100 200 300 400 500 600 700
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN3000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
10.00
65 Hz
60 Hz
7.50
Head 55 Hz
(m)
50 Hz
5.00
2.50
1.00
70 Hz
0.90
65 Hz
0.80
0.70 60 Hz
0.60
Power 55 Hz
(hp) 0.50
0.40 50 Hz
0.30
0.20
0.10
0 100 200 300 400 500 600 700 800 900 1,000
Capacity (m3/d)
Back to Pumps
DN3100 Pump
Back to Pumps
DN3100 Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 118 2
170 125 1 1
180 133 1 1
190 140 1 1
200 148 2
210 155 1 1
220 162 2
230 170 1 1
240 178† 2
250 185† 1 1
260 192† 2
270 200† 1 1
280 208† 2
290 215† 1 1
300 222† 2
310 229† 2 1
320 236† 1 2
330 243† 3
340 251† 2 1
350 259†, ‡ 1 2
360 267†, ‡ 3
370 274†, ‡ 2 1
380 281†, ‡ 1 2
390 288†, ‡ 3
400 296†, ‡ 2 1
410 304†, ‡ 1 2
420 312†, ‡ 3
430 319†, ‡ 2 1
440 326†, ‡ 1 2
450 333†, ‡ 3
460 341†, ‡ 1 3
470 348†, ‡ 1 3
480 356†, ‡ 4
490 363†, ‡ 3 1
500 371†, ‡ 3§ 1§
510 377†, ‡ 1§ 3§
520 384†, ‡ 4§
530 392†, ‡ 3§, †† 1§, ††
540 399†, ‡ 3§, †† 0§, †† 1§, ††
550 407†, ‡ 2§, †† 1§, †† 1§, ††
560 414†, ‡ 2§, †† 0§, †† 2§, ††
570 422†, ‡ 1§, †† 1§, †† 2§, ††
580 430†, ‡ 2§, †† 2§, ††
590 437†, ‡ 1§, †† 3§, ††
600 444†, ‡ 4§, ††
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector for compression pumps
‡ Requires use of high-load bearing in protector for floater pumps
Back to Pumps
Pumps
Optimum operating range 2,100–3,900 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 4.00 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.601 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
30 Head 3.00 60
Operating range
25 2.50 50
20 2.00 40
Head Efficiency
(ft)
15 1.50 30
10 1.00 20
Power
5 0.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN3100 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
35
70 Hz
30 65 Hz
25 60 Hz
55 Hz
Head 20
(ft)
50 Hz
15
10
1.00 70 Hz
0.90
0.80 65 Hz
0.70
60 Hz
0.60
Power 0.50 55 Hz
(hp)
0.40 50 Hz
0.30
0.20
0.10
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500
Capacity (B/D)
Back to Pumps
Pumps
Head
6.00 3.00 60
Operating range
5.00 2.50 50
4.00 2.00 40
Head Efficiency
(m)
3.00 1.50 30
2.00 1.00 20
1.00 0.50 10
Power
0 0 0
0 100 200 300 400 500 600 700
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump DN3100 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
10.00
65 Hz
60 Hz
7.50
Head 55 Hz
(m)
50 Hz
5.00
2.50
1.00 70 Hz
0.90
0.80 65 Hz
0.70
60 Hz
0.60
Power
0.50 55 Hz
(hp)
0.40 50 Hz
0.30
0.20
0.10
Back to Pumps
D3500N Pump
Back to Pumps
400 Series, Min. Casing Size 5½-in [139.7-mm] OD
Back to Pumps
D3500N Pump, 400 Series, Tandem Configurations
160 96 2
170 102 1 1
180 108 2
190 114 1 1
200 120 2
210 126 1 1
220 132 2
230 138 1 1
240 144 2
250 151 1 1
260 158 2
270 164 1 1
280 170 2
290 176 1 1
300 182 2
310 186 2 1
320 192 1 2
330 198 3
340 204 2 1
350 210 1 2
360 216 3
370 223 2 1
380 230 1 2
390 237 3
400 243 2 1
410 249 1 2
420 255 3
430 261 2 1
440 267 1 2
450 273 3
460 278 2 2
470 284 1 1 2
480 290 2 2
490 296 1 1 2
500 302 2 2
510 308 1 1 2
520 314 2 2
530 320 1 1 2
540 326 2 2
Back to Pumps
REDA ESP D3500 Pump Performance Curve 50 Hz, 2,917 rpm
Pumps
Head
6.00 3.00 60
5.00 2.50 50
Efficiency
4.00 2.00 40
Head,
m
3.00 1.50 30
Operating range
2.00 1.00 20
1.00 0.50 10
Power
0 0 0
0 100 200 300 400 500 600 700 800
Capacity, m3⁄d
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D3500N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
45
70 Hz
40
65 Hz
35
60 Hz
30
55 Hz
Head,
25
ft
50 Hz
20
15
10
70 Hz
1.75
1.50 65 Hz
1.25
60 Hz
Power, 1.00
hp 55 Hz
0.75
50 Hz
0.50
0.25
Back to Pumps
REDA ESP D3500N Pump Performance Curve 60 Hz, 3,500 rpm
Pumps
Optimum operating range 2,400–4,500 bbl/d Shaft brake-power limit Standard 316 hp
D3500N Pump
Head
30 3.00 60
25 2.50 50
20 2.00 40
Head, Efficiency Operating range
ft
15 1.50 30
10 1.00 20
Power
5 0.50 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000
Capacity, bbl/d
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
D4300N Pump
Back to Pumps
D4300N Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 70 2
170 75 1 1
180 80 2
190 84 1 1
200 88 2
210 93 1 1
220 98 2
230 103 1 1
240 108 2
250 112 1 1
260 116 2
270 121 1 1
280 126 2
290 130 1 1
300 134 2
310 137 2 1
320 142 1 2
330 147 3
340 152 2 1
350 157 1 2
360 162 3
370 166 2 1
380 170 1 2
390 174 3
400 179 2 1
410 184 1 2
420 189 3
430 193 2 1
440 197 1 2
450 201 3
460 206 1 3
470 211 1 3
480 216 4
490 220† 3 1
500 223† 1 3
510 228† 1 3
520 232† 4
530 237† 3 1
Note: Stage counts are for C-CT-ES pumps.
† Requires use of high-load bearing in protector
Back to Pumps
Pumps
Optimum operating range 3,500–5,400 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 4.00 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.601 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
35 3.50 70
Head
25 2.50 50
Head 20 2.00 40
(ft)
15 1.50 30
10 1.00 20
Power
5 0.50 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D4300N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
35
70 Hz
30
65 Hz
25
60 Hz
Head 20 55 Hz
(ft)
50 Hz
15
10
1.50 70 Hz
1.25
65 Hz
1.00
Power 60 Hz
(hp)
0.75 55 Hz
50 Hz
0.50
0.25
Capacity (B/D)
Back to Pumps
Pumps
7.00 3.50 70
Efficiency
6.00 3.00 60
Head Operating range
5.00 2.50 50
3.00 1.50 30
2.00 1.00 20
0 0 0
0 100 200 300 400 500 600 700 800
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D4300N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
10.00 70 Hz
65 Hz
7.50 60 Hz
Head
(m) 55 Hz
5.00 50 Hz
2.50
1.50 70 Hz
1.25
65 Hz
1.00
60 Hz
Power
(hp) 0.75 55 Hz
50 Hz
0.50
0.25
Back to Pumps
D5800N Pump
Back to Pumps
D5800N Pump, 400 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 70 2
170 75 1 1
180 80 2
190 84 1 1
200 88 2
210 93 1 1
220 98 2
230 103 1 1
240 108 2
250 112 1 1
260 116 2
270 121 1 1
280 126 2
290 130 1 1
300 134 2
310 137 2 1
320 142 1 2
330 147 3
340 152 2 1
350 157 1 2
360 162 3
370 166 2 1
380 170 1 2
390 174 3
400 179 2 1
410 184 1 2
420 189 3‡
430 193 2‡ 1‡
440 197† 1‡ 2‡
450 201† 3‡
460 206† 1‡ 3‡
470 211† 1‡ 3‡
480 216† 4‡
490 220† 3‡ 1‡
500 223† 1‡ 3‡
510 228† 1‡ 3‡
520 232† 4‡
530 237† 3‡ 1‡
Note: Stage counts are for C-CT-ES pumps.
† Requires use of high-load bearing in protector
Back to Pumps
Pumps
Optimum operating range 4,400–7,000 B/D Shaft brake-power limit Standard 255 hp
Nominal housing diameter 4.00 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.601 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 5.500 in. Welded 6,000 psi (hp) (%)
35 3.50 70
Efficiency
30 3.00 60
Head Operating range
25 2.50 50
Head 20 2.00 40
(ft)
15 1.50 30
10 Power 1.00 20
5 0.50 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D5800N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
35
70 Hz
30 65 Hz
25 60 Hz
Head
(ft) 55 Hz
20
50 Hz
15
10
2.25 70 Hz
2.00
1.75 65 Hz
1.50
60 Hz
Power 1.25
(hp) 55 Hz
1.00
50 Hz
0.75
0.50
0.25
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Capacity (B/D)
Back to Pumps
Pumps
7.00 3.50 70
6.00 3.00 60
Head
5.00 2.50 50
3.00 1.50 30
Operating range
2.00 1.00 20
Power
1.00 0.50 10
0 0 0
0 100 200 300 400 500 600 700 800 900 1,000 1,1 00
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump D5800N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
10.00
65 Hz
7.50 60 Hz
Head 55 Hz
(m)
50 Hz
5.00
2.50
2.25 70 Hz
2.00
1.75 65 Hz
1.50
60 Hz
Power 1.25
(hp) 55 Hz
1.00
50 Hz
0.75
0.50
0.25
Back to Pumps
GN1600 Pump
Back to Pumps
GN1600 Pump, 540 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 50 60 70 80 90
Housing of Stages
100 150 2
110 165 1 1
120 180 2
130 196† 1 1
140 212†, ‡ 2
150 228†, ‡ 1 1
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
Back to Pumps
Pumps
60 3.00 60
Head
50 2.50 50
40 2.00 40
Efficiency
Head
(ft)
30 Operating range 1.50 30
20 1.00 20
Power
10 0.50 10
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 2,750
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN1600 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
70
65 Hz
60
60 Hz
50
55 Hz
40 50 Hz
Head
(ft)
30
20
10
70 Hz
1.50
1.25 65 Hz
1.00 60 Hz
Power
(hp) 0.75 55 Hz
0.50
50 Hz
0.25
Capacity (B/D)
Back to Pumps
Pumps
15.00 3.00 60
10.00 2.00 40
Head
(m)
7.50 1.50 30
Efficiency
5.00 1.00 20
0 0 0
0 50 100 150 200 250 300 350
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN1600 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
22.50 70 Hz
20.00
65 Hz
17.50
60 Hz
15.00
55 Hz
Head 12.50
(m) 50 Hz
10.00
7.50
5.00
2.50
70 Hz
1.50
1.25 65 Hz
1.00 60 Hz
Power
0.75 55 Hz
(hp)
0.50
50 Hz
0.25
Back to Pumps
GN2100 Pump
Back to Pumps
GN2100 Pump, 540 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110
Housing of Stages
120 146 2
130 158 1 1
140 170 2
150 183† 1 1
160 196† 2
170 209†, ‡ 1 1
180 222†, ‡ 2
190 235†, ‡ 1§ 1§
200 248†, ‡ 2§
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
‡ Requires use of buttress threads in uppermost pump
Back to Pumps
Pumps
Optimum operating range 1,650–2,700 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 5.13 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.601 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 6.625 in. Welded 6,000 psi (hp) (%)
60 3.00 60
Head
50 2.50 50
40 2.00 40
Head
(ft) Efficiency
30 1.50 30
20 1.00 20
Power
10 0.50 10
Operating range
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN2100 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70
70 Hz
60 65 Hz
50 60 Hz
55 Hz
Head 40
(ft)
50 Hz
30
20
10
1.75 70 Hz
1.50
65 Hz
1.25
60 Hz
Power 1.00
(hp) 55 Hz
0.75
50 Hz
0.50
0.25
Back to Pumps
Pumps
15.00 3.00 60
Operating range
12.50 2.50 50
Head
10.00 2.00 40
Head
(m)
7.50 1.50 30
Efficiency
5.00 1.00 20
0 0 0
0 50 100 150 200 250 300 350 400 450
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN2100 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
22.50
70 Hz
20.00
65 Hz
17.50
60 Hz
15.00
Head 55 Hz
12.50
(m)
50 Hz
10.00
7.50
5.00
2.50
1.75 70 Hz
1.50
65 Hz
1.25
60 Hz
Power 1.00
(hp) 55 Hz
0.75
50 Hz
0.50
0.25
Back to Pumps
GN3200 Pump
Back to Pumps
GN3200 Pump, 540 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
130 144 1 1
140 156 2
150 168† 1 1
160 180† 2‡
170 191† 1‡ 1‡
180 202†, § 2‡
190 214†, § 1‡ 1‡
200 226†, § 2‡
210 237†, § 1‡ 1‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 2,200–4,100 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 5.13 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.601 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 6.625 in. Welded 6,000 psi (hp) (%)
60 3.00 60
Head
50 2.50 50
40 2.00 40
Head Efficiency
(ft)
30 1.50 30
Power
20 1.00 20
10 0.50 10
Operating range
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN3200 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70
70 Hz
60
65 Hz
50 60 Hz
Head 55 Hz
40
(ft)
50 Hz
30
20
10
70 Hz
2.25
2.00
65 Hz
1.75
1.50 60 Hz
Power 1.25
55 Hz
(hp) 1.00
50 Hz
0.75
0.50
0.25
Back to Pumps
Pumps
15.00 3.00 60
12.50 2.50 50
Head
Operating range
10.00 2.00 40
Head
(m)
7.50 1.50 30
Efficiency
5.00 1.00 20
Power
2.50 0.50 10
0 0 0
0 100 200 300 400 500 600 700
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN3200 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
22.50
20.00 70 Hz
17.50 65 Hz
15.00 60 Hz
Head 12.50 55 Hz
(m)
50 Hz
10.00
7.50
5.00
2.50
70 Hz
2.25
2.00
65 Hz
1.75
1.50 60 Hz
Power 1.25
55 Hz
(hp) 1.00
50 Hz
0.75
0.50
0.25
0 100 200 300 400 500 600 700 800 900 1,000
Capacity (m /d)
3
Back to Pumps
GN4000 Pump
Back to Pumps
GN4000 Pump, 540 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
160 104 2
170 111 1 1
180 118 2
190 125 1 1
200 132 2
210 139† 1 1
220 146† 2
230 152† 1 1
240 158† 2
250 165† 1 1
260 172† 2
270 179† 1‡ 1‡
280 186† 2‡
290 193† 1‡
300 200†
310 205† 2‡ 1‡
320 212† 1‡ 2‡
330 219†, § 3‡
340 225†, § 2‡ 1‡
350 231†, § 1‡ 2‡
360 237†, § 3‡
370 244†, § 2‡ 1‡
380 251†, § 1‡ 2‡
390 258†, § 3‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 3,200–4,800 B/D Shaft brake-power limit Standard 375 hp
Nominal housing diameter 5.13 in. High strength 600 hp
Shaft diameter 1.000 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.785 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 6.625 in. Welded 6,000 psi (hp) (%)
60 Efficiency 3.00 60
40 2.00 40
Head
(ft)
30 Power 1.50 30
20 1.00 20
10 0.50 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN4000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70
60
70 Hz
50 65 Hz
60 Hz
Head 40
(ft) 55 Hz
30 50 Hz
20
10
2.25 70 Hz
2.00
65 Hz
1.75
1.50 60 Hz
Power 1.25
55 Hz
(hp) 1.00
50 Hz
0.75
0.50
0.25
Back to Pumps
Pumps
15.00 3.00 60
Efficiency
12.50 2.50 50
Operating range
Head
10.00 2.00 40
Head
(m)
7.50 1.50 30
5.00 1.00 20
Power
2.50 0.50 10
0 0 0
0 100 200 300 400 500 600 700 800 900
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN4000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
20.00
17.50 70 Hz
15.00 65 Hz
60 Hz
12.50
Head
55 Hz
(m)
10.00
50 Hz
7.50
5.00
2.50
2.25 70 Hz
2.00
65 Hz
1.75
1.50 60 Hz
Power 1.25
55 Hz
(hp) 1.00
50 Hz
0.75
0.50
0.25
Back to Pumps
GN5200 Pump
Back to Pumps
GN5200 Pump, 540 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
160 72 2
170 76 1 1
180 80 2
190 85 1 1
200 90 2
210 95 1 1
220 100 2
230 104 1 1
240 108 2
250 113 1 1
260 118 2
270 123 1 1
280 128 2
290 132 1
300 136
310 140 2 1
320 145 1 2
330 150 3
340 154 2 1
350 158 1 2
360 162† 3
370 167† 2 1
380 172† 1 2
390 177† 3
400 182† 2 1
410 187† 1 2
420 192† 3
430 196† 2
440 200† 1
450 204†
460 207† 1 3
470 212† 1 3
480 216† 4‡
490 221† 3‡ 1‡
500 227† 1‡ 3‡
510 231† 1‡ 3‡
520 236† 4‡
530 241† 3‡ 1‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
Back to Pumps
Pumps
Optimum operating range 3,900–6,600 B/D Shaft brake-power limit Standard 375 hp
Nominal housing diameter 5.13 in. High strength 600 hp
Shaft diameter 1.000 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.785 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 6.625 in. Welded 6,000 psi (hp) (%)
Head
60 6.00 60
50 5.00 50
40 4.00 40
Head Efficiency
(ft)
30 3.00 30
20 Power 2.00 20
Operating range
10 1.00 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN5200 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
60
50 70 Hz
65 Hz
40
60 Hz
Head
(ft)
30 55 Hz
50 Hz
20
10
70 Hz
2.50
65 Hz
2.00
60 Hz
Power 1.50
(hp) 55 Hz
1.00 50 Hz
0.50
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Capacity (B/D)
Back to Pumps
Pumps
15.00 3.00 60
Efficiency
12.50 2.50 50
Operating range
2.50 0.50 10
0 0 0
0 100 200 300 400 500 600 700 800 900 1,000 1,100
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN5200 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
17.50
15.00 70 Hz
65 Hz
12.50
60 Hz
Head
(m) 10.00
55 Hz
50 Hz
7.50
5.00
2.50
70 Hz
2.50
65 Hz
2.00
60 Hz
Power 1.50
(hp) 55 Hz
1.00 50 Hz
0.50
Back to Pumps
G6200N Pump
Back to Pumps
G6200N Pump, 540 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 72 2
170 77 1 1
180 81 1 1
190 86 1 1
200 90† 2
210 95† 1 1
220 100† 2
230 104† 1 1
240 108† 2
250 113† 1 1
260 118† 2
270 123† 1 1
280 128† 2
290 132† 1 1
300 136† 2
310 140† 2 1
320 145† 1 2
330 150† 3
340 154† 2 1
350 158† 1 2
360 162† 3
370 167† 2‡ 1‡
380 172† 1‡ 2‡
390 177†, § 3‡
400 182†, § 2‡ 1‡
410 187†, § 1‡ 2‡
420 192†, § 3‡
430 196†, § 2‡ 1‡
440 200†, § 1‡ 2‡
450 204†, § 3‡
460 207†, § 1‡ 3‡
470 212†, § 1‡ 3‡
480 216†, § 4‡
490 221†, § 3‡, †† 1‡, ††
500 226†, § 3‡, †† 1‡, ††
510 231†, § 1‡, †† 3‡, ††
520 236†, § 4‡, ††
530 241†, § 3‡, †† 1‡, ††
540 245†, § 3‡, †† 0‡, †† 1‡, ††
550 250†, § 2‡, †† 1‡, †† 1‡, ††
560 254†, § 2‡, †† 0‡, †† 2‡, ††
570 259†, § 1‡, †† 1‡, †† 2‡, ††
580 264†, § 2‡, †† 2‡, ††
590 268†, § 1‡, †† 3‡, ††
600 272†, § 4‡, ††
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector for compression pumps
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 4,500–8,000 B/D Shaft brake-power limit Standard 375 hp
Nominal housing diameter 5.13 in. High strength 600 hp
Shaft diameter 1.00 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.785 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 6.625 in. Welded 6,000 psi (hp) (%)
70 7.00 70
60 6.00 60
Efficiency
Head Operating range
50 5.00 50
Head 40 4.00 40
(ft)
30 3.00 30
20 Power 2.00 20
10 1.00 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump G6200N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70
60
70 Hz
50 65 Hz
60 Hz
40
Head 55 Hz
(ft)
30 50 Hz
20
10
3.50 70 Hz
3.00
65 Hz
2.50
60 Hz
2.00
Power 55 Hz
(hp) 1.50
50 Hz
1.00
0.50
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000
Capacity (B/D)
Back to Pumps
Pumps
17.50 3.50 70
15.00 3.00 60
Efficiency
12.50 2.50 50
Head Operating range
Head 10.00 2.00 40
(m)
7.50 1.50 30
Power
5.00 1.00 20
2.50 0.50 10
0 0 0
0 250 500 750 1,000 1,250
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump G6200N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
20.00
17.50 70 Hz
15.00 65 Hz
60 Hz
12.50
Head
55 Hz
(m)
10.00
50 Hz
7.50
5.00
2.50
3.50 70 Hz
3.00
65 Hz
2.50
60 Hz
Power 2.00
(hp) 55 Hz
1.50
50 Hz
1.00
0.50
Back to Pumps
GN7000 Pump
Back to Pumps
GN7000 Pump, 540 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
160 72 2
170 76 1 1
180 80 2
190 85 1 1
200 90 2
210 95 1 1
220 100 2
230 104 1 1
240 108 2
250 113 1 1
260 118 2
270 123 1 1
280 128 2
290 132 1
300 136
310 140 2 1
320 145 1‡ 2‡
330 150 3‡
340 154† 2‡ 1‡
350 158† 1‡ 2‡
360 162† 3‡
370 167† 2‡ 1‡
380 172† 1‡ 2‡
390 177† 3‡
400 182† 2‡ 1‡
410 187† 1‡ 2‡
420 192† 3‡
430 196† 2‡
440 200† 1‡
450 204†
460 207† 1‡ 3‡
470 212† 1‡ 3‡
480 216† 4‡
490 221† 3‡ 1‡
500 227† 1‡ 3‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 5,000–9,000 B/D Shaft brake-power limit Standard 375 hp
Nominal housing diameter 5.13 in. High strength 600 hp
Shaft diameter 1.000 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 0.785 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 6.625 in. Welded 6,000 psi (hp) (%)
60 15.00 60
Efficiency
40 10.00 40
Head
(ft)
30 7.50 30
20 5.00 20
10 Power 2.50 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN7000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
60
70 Hz
50
65 Hz
60 Hz
40
Head 55 Hz
(ft)
30 50 Hz
20
10
70 Hz
4.00
3.50 65 Hz
3.00
60 Hz
2.50
Power 55 Hz
(hp) 2.00
1.50 50 Hz
1.00
0.50
Back to Pumps
Pumps
15.00 6.00 60
Efficiency
12.50 5.00 50
Operating range
Head
10.00 4.00 40
Head
(m)
7.50 3.00 30
5.00 2.00 20
Power
2.50 1.00 10
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN7000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
17.50
70 Hz
15.00 65 Hz
12.50 60 Hz
Head 55 Hz
(m) 10.00
50 Hz
7.50
5.00
2.50
70 Hz
4.00
3.50 65 Hz
3.00
60 Hz
2.50
Power
(hp) 2.00 55 Hz
1.50 50 Hz
1.00
0.50
Back to Pumps
GN10000 Pump
Back to Pumps
GN10000 Pump, 540 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140
Housing of Stages
160 60 2
170 64 1 1
180 68 2
190 72 1 1
200 76 2
210 80 1 1
220 84 2
230 88 1 1
240 92 2
250 96 1 1
260 100 2
270 104 1 1
280 108 2
290 112 1
300 116
310 118† 2 1
320 122† 1 2
330 126† 3
340 130† 2 1
350 134† 1 2
360 138† 3
370 142† 2 1
380 146† 1 2
390 150† 3
400 154† 2 1
410 158† 1 2
420 162† 3
430 166† 2
440 170† 1
450 174†
460 178† 1 3
470 182† 1 3
480 186† 4
490 190† 3 1
500 194† 3
510 200† 1 3
520 204† 4
530 208† 3 1
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
Back to Pumps
Pumps
Optimum operating range 7,000–12,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 5.13 in. High strength 1,019hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 5,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 6.625 in. Welded 6,000 psi (hp) (%)
70 17.50 70
Efficiency
60 15.00 60
Operating range
50 12.50 50
Head Head
40 10.00 40
(ft)
30 7.50 30
20 5.00 20
Power
10 2.50 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN10000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
50
70 Hz
65 Hz
40
60 Hz
Head 30 55 Hz
(ft)
50 Hz
20
10
5.00 70 Hz
4.50
4.00 65 Hz
3.50
60 Hz
3.00
Power
(hp) 2.50 55 Hz
2.00 50 Hz
1.50
1.00
0.50
Back to Pumps
Pumps
17.50 7.00 70
Efficiency
15.00 6.00 60
Operating range
12.50 5.00 50
5.00 2.00 20
Power
2.50 1.00 10
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump GN10000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
17.50
15.00 70 Hz
65 Hz
12.50
60 Hz
Head
(m) 10.00
55 Hz
7.50 50 Hz
5.00
2.50
5.00 70 Hz
4.50
4.00 65 Hz
3.50
60 Hz
3.00
Power
2.50 55 Hz
(hp)
2.00 50 Hz
1.50
1.00
0.50
Back to Pumps
SN2600 Pump
Back to Pumps
SN2600 Pump, 538 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
130 163† 1 1
140 176† 2
150 189†, ‡ 1§ 1§
160 202†, ‡ 2§
170 215†, ‡ 1§ 1§
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
Back to Pumps
Pumps
Optimum operating range 1,600–3,200 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 5.38 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.601 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 7.000 in. Welded 6,000 psi (hp) (%)
Head
60 3.00 60
50 2.50 50
40 2.00 40
Efficiency
Head
(ft)
30 1.50 30
20 Power 1.00 20
Operating range
10 0.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump SN2600 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
80
70 Hz
70
65 Hz
60
60 Hz
50 55 Hz
Head
(ft) 50 Hz
40
30
20
10
2.25 70 Hz
2.00
65 Hz
1.75
1.50 60 Hz
Power 1.25
(hp) 55 Hz
1.00
0.75 50 Hz
0.50
0.25
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (B/D)
Back to Pumps
Pumps
15.00 3.00 60
10.00 2.00 40
Head
Efficiency
(m)
7.50 1.50 30
5.00 1.00 20
Power
2.50 0.50 10
0 0 0
0 50 100 150 200 250 300 350 400 450 500 550
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump SN2600 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
25.00
70 Hz
22.50
65 Hz
20.00
17.50 60 Hz
15.00 55 Hz
Head
(m) 12.50 50 Hz
10.00
7.50
5.00
2.50
2.25 70 Hz
2.00
65 Hz
1.75
1.50 60 Hz
Power 1.25
(hp) 55 Hz
1.00
50 Hz
0.75
0.50
0.25
Back to Pumps
SN3600 Pump
Back to Pumps
SN3600 Pump, 538 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 60 70 80 90 100 110 120
Housing of Stages
160 142† 2‡
170 152† 1‡ 1‡
180 162† 2‡
190 171† 1‡ 1‡
200 180† 2‡
210 189† 1‡ 1‡
220 198† 2‡
230 208† 1‡ 1‡
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector
‡ Requires use of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 2,400–4,600 B/D Shaft brake-power limit Standard 256 hp
Nominal housing diameter 5.38 in. High strength 410 hp
Shaft diameter 0.875 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.601 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 7.000 in. Welded 6,000 psi (hp) (%)
70 7.00 70
Head
60 6.00 60
50 5.00 50
Efficiency
Head 40 4.00 40
(ft)
Operating range
30 3.00 30
20 2.00 20
Power
10 1.00 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump SN3600 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
80
65 Hz
70
60 Hz
60
55 Hz
50
Head
50 Hz
(ft)
40
30
20
10
3.00 70 Hz
2.50 65 Hz
2.00 60 Hz
Power
(hp) 1.50 55 Hz
50 Hz
1.00
0.50
Back to Pumps
Pumps
17.50 3.50 70
Efficiency
15.00 3.00 60
Head Operating range
12.50 2.50 50
7.50 1.50 30
5.00 1.00 20
Power
2.50 0.50 10
0 0 0
0 100 200 300 400 500 600 700 800
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump SN3600 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
25.00
22.50 65 Hz
20.00
60 Hz
17.50
55 Hz
15.00
Head
(m) 50 Hz
12.50
10.00
7.50
5.00
2.50
3.00 70 Hz
2.50 65 Hz
2.00 60 Hz
Power
(hp) 1.50 55 Hz
50 Hz
1.00
0.50
0 100 200 300 400 500 600 700 800 900 1,000
Capacity (m /d)
3
Back to Pumps
S5000N Pump
Back to Pumps
S5000N Pump, 538 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 57† 1
160 64† 1
160 71† 1
160 77† 1
160 84† 1
160 90† 1
160 97† 1
160 102† 2
170 108† 1 1
180 115† 1 1
190 121† 1 1
200 128† 2
210 135†, ‡ 1 1
220 142†, ‡ 2
230 148†, ‡ 1 1
240 154†, ‡ 2
Note: Stage counts are for FL-CT-ES pumps.
† Requires use of high-load bearing in protector for compression pumps
‡ Requires use of high-load bearing in protector for floater pumps
Back to Pumps
Pumps
Optimum operating range 4,000–5,400 B/D Shaft brake-power limit Standard 375 hp
Nominal housing diameter 5.38 in. High strength 600 hp
Shaft diameter 1.000 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 0.785 in.2 Buttress 6,000 psi Power Efficiency
Min. casing size 7.000 in. Welded 6,000 psi (hp) (%)
70 7.00 70
Head
Efficiency
60 6.00 60
Operating range
50 5.00 50
Head 40 4.00 40
(ft)
30 3.00 30
Power
20 2.00 20
10 1.00 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump S5000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
90
80
70 70 Hz
65 Hz
60
60 Hz
Head 50
(ft)
55 Hz
40
50 Hz
30
20
10
70 Hz
3.00
2.50 65 Hz
2.00 60 Hz
Power
(hp) 1.50 55 Hz
50 Hz
1.00
0.50
Back to Pumps
Pumps
17.50 3.50 70
Efficiency
15.00 3.00 60
Head
Operating range
12.50 2.50 50
7.50 1.50 30
Power
5.00 1.00 20
2.50 0.50 10
0 0 0
0 100 200 300 400 500 600 700 800 900 1,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump S5000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
25
70 Hz
20
65 Hz
60 Hz
Head 15
(m) 55 Hz
50 Hz
10
70 Hz
3.00
2.50 65 Hz
2.00 60 Hz
Power
(hp) 1.50 55 Hz
50 Hz
1.00
0.50
Back to Pumps
S6000N Pump
Back to Pumps
538 Series, Min. Casing Size 7-in [177.8-mm] OD
ARZ* Carbon Steel ARZ Redalloy Alloy
Length, Weight
HSG CR-CT †
CR-CT†
ft [m] lbm [kg] Max. Stages Max. Stages
Part Number Part Number
30 4.9 [1.49] 220 [99.9] 15 100304066 15 tba‡
40 6.3 [1.92] 284 [128.9] 20 100304068 20 tba
50 7.7 [2.35] 347 [157.5] 26 100304069 26 100304978
60 9.1 [2.78] 412 [187.0] 31 100304070 31 100304979
70 10.5 [3.20] 473 [214.7] 37 100304071 37 100304980
80 11.9 [3.63] 537 [243.8] 43 100304072 43 100304981
90 13.3 [4.06] 602 [273.3] 48 100304074 48 100304982
100 14.7 [4.48] 665 [301.9] 54 100304075 54 100304984
110 16.1 [4.91] 729 [331.0] 59 100304076 59 100304985
120 17.5 [5.34] 793 [360.0] 65 100304077 65 100304986
130 18.9 [5.76] 857 [389.0] 71 100304079 71 100304987
140 20.4 [6.20] 921 [418.1] 76 100304080 76 100304988
150 21.8 [6.63] 985 [447.2] 82 100304081 82 100304989
†
This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this
pump type is mated with nonfactory-shimmed equipment, the field shimming procedures must be followed.
‡
to be assigned
Back to Pumps
REDA ESP S6000N Pump Performance Curve 50 Hz, 2,917 rpm
Pumps
17.50 7.00 70
Head
12.50 5.00 50
7.50 3.00 30
5.00 2.00 20
Power
2.50 1.00 10
Operating range
0 0 0
0 250 500 750 1,000 1,250 1,500
Capacity, m3⁄d
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump S6000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
90
70 Hz
80
65 Hz
70
60 Hz
60
Head, 55 Hz
50
ft
50 Hz
40
30
20
10
5.00
70 Hz
4.50
4.00 65 Hz
3.50
3.00 60 Hz
Power,
hp 2.50 55 Hz
2.00
50 Hz
1.50
1.00
0.50
Back to Pumps
REDA ESP S6000N Pump Performance Curve 60 Hz, 3,500 rpm
Pumps
Optimum operating range 3,500–7,800 bbl/d Shaft brake-power limit Standard 463 hp
S6000N Pump
70 17.50 70
Head
60 15.00 60
50 12.50 50
Head, Efficiency
40 10.00 40
ft
30 7.50 30
Operating range
20 5.00 20
10 Power 2.50 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Capacity, bbl/d
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump S6000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
25
65 Hz
20
60 Hz
55 Hz
Head 15
(m)
50 Hz
10
5.00 70 Hz
4.50
4.00 65 Hz
3.50
60 Hz
3.00
Power
2.50 55 Hz
(hp)
2.00 50 Hz
1.50
1.00
0.50
Back to Pumps
S8000N Pump
ES Carbon Steel
Housing Length, Weight, Max. FL-CT ES
ft [m] lbm [kg] Stages Part Number
30 4.9 [1.49] 220 [100] 15 100401456
40 6.3 [1.92] 284 [129] 20 100441076
50 7.7 [2.35] 347 [158] 26 100441077
60 9.1 [2.77] 412 [187] 31 100441080
70 10.5 [3.20] 473 [215] 37 100441081
80 11.9 [3.63] 537 [244] 42 100441082
90 13.3 [4.05] 602 [274] 48 100441083
100 14.7 [4.48] 665 [302] 53 100441084
110 16.1 [4.91] 729 [331] 59 100441085
120 17.5 [5.34] 793 [360] 64 100441086
130 18.9 [5.76] 857 [390] 70 100441087
140 20.4 [6.22] 921 [419] 75 100441088
150 21.8 [6.65] 985 [448] 81 100441089
Back to Pumps
538 Series, Min. Casing Size 7-in (177.8-mm) OD
Back to Pumps
S8000N Pump, 538 Series, Tandem Configurations
160 86 2
170 92 1 1
180 98 2
190 104 1 1
200 110 2
210 115 1 1
220 120 2
230 126 1 1
240 132 2
250 137 1 1
260 142 2
270 148 1 1
280 154 2
290 160 1 1
300 166 2
310 170 2 1
320 175 1 2
330 180 3
340 186 2 1
350 192 1 2
Back to Pumps
Pumps REDA* ESP S8000N Pump Performance Curve 50 Hz, 2,917 rpm
Curve computed for one stage in fluid of 1.00 sg.
n
17.50 7.00 70
Head
15.00 6.00 60
5.00 2.00 20
Power
2.50 1.00 10
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000
Capacity, m3⁄d
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump S8000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
80 70 Hz
70 65 Hz
60 60 Hz
50 55 Hz
Head,
ft
50 Hz
40
30
20
10
6.00 70 Hz
5.00 65 Hz
4.00 60 Hz
Power,
hp 55 Hz
3.00
50 Hz
2.00
1.00
Back to Pumps
Pumps
REDA ESP S8000N Pump Performance Curve 60 Hz, 3,500 rpm
Curve computed for one stage in fluid of 1.00 sg.
n
Optimum operating range 350–10,500 bbl/d Shaft brake-power limit Standard 463 hp
S8000N Pump
70 17.50 70
Head
60 15.00 60
50 12.50 50
Head, 40 10.00 40
ft Efficiency
20 5.00 20
Power
10 2.50 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500
Capacity, bbl/d
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
ESP Catalog
Back to Pumps
SN8500 Pump
Back to Pumps
SN8500 Pump, 538 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 76 2
170 81 1 1
180 86 2
190 91 1 1
200 96 2
210 101 1 1
220 106 2
230 111 1 1
240 116 2†
250 121 1† 1†
260 126 2†
270 131 1†
280 136
290 141
300 146
310 149 2† 1†
320 154 1† 2†
330 159 3†
340 164 2† 1†
350 169 1† 2†
360 174 3†
370 179 2† 1†
380 184 1† 2†
Note: Stage counts are for FL-CT-ES pumps.
† Requiresuse of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 6,000–11,000 B/D Shaft brake-power limit Standard 375 hp
SN8500 Pump
70 17.50 70
60 Efficiency 15.00 60
Head Operating range
50 12.50 50
Head
(ft) 40 10.00 40
30 7.50 30
20 5.00 20
Power
10 2.50 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump SN8500 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
80
70
70 Hz
60
65 Hz
50
Head 60 Hz
(ft)
40 55 Hz
50 Hz
30
20
10
5.00 70 Hz
4.50
4.00 65 Hz
3.50
60 Hz
3.00
Power
(hp) 2.50 55 Hz
2.00 50 Hz
1.50
1.00
0.50
Back to Pumps
Pumps
17.50 7.00 70
Efficiency
15.00 6.00 60
7.50 3.00 30
5.00 2.00 20
Power
2.50 1.00 10
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump SN8500 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
25.00
22.50
20.00
70 Hz
17.50
65 Hz
15.00
Head 60 Hz
(m)
12.50
55 Hz
10.00 50 Hz
7.50
5.00
2.50
5.00 70 Hz
4.50
4.00 65 Hz
3.50
60 Hz
3.00
Power
(hp) 2.50 55 Hz
2.00 50 Hz
1.50
1.00
0.50
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 2,750
Capacity (m /d)
3
Back to Pumps
S8900N Pump
Back to Pumps
Advanced Designs—538 Series, Min. Casing Size 7-in. [177.8-mm] OD
Housing Length, Weight, Max. Part Number Configuration Housing Integral Integral
ft [m] lbm [kg] Stages Material Intake AGH* Device
150 21.7 [6.62] 989 [449.0] 73 100151317 CR-UT-ES1† Carbon Steel
150 21.7 [6.62] 989 [449.0] 73 100217644 CR-UT-ARZ† Carbon Steel
150 21.7 [6.62] 989 [449.0] 73 100187803 CR-CT-ES1† Carbon Steel Yes
150 21.7 [6.62] 989 [449.0] 73 100164598 CR-LT-ES1† Redalloy* alloy Yes Yes
150 21.7 [6.62] 989 [449.0] 73 100187848 CR-CT-ES1† Redalloy alloy Yes
150 21.7 [6.62] 989 [449.0] 73 100164602 CR-LT-ES1† Redalloy alloy Yes Yes
150 21.7 [6.62] 989 [449.0] 73 100218178 CR-CT-ARZ† Redalloy alloy Yes
150 21.7 [6.62] 989 [449.0] 73 100217760 CR-LT-ARZ† Redalloy alloy Yes Yes
† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely,
if this pump type is mated with nonfactory-shimmed equipment, the field shimming procedures must be followed.
Back to Pumps
Pumps
Optimum operating range 4,000–11,000 B/D Shaft brake-power limit Standard 375 hp
S8900N Pump
70 17.50 70
60 Head 15.00 60
Head
(ft) 40 10.00 40
Efficiency
30 7.50 30
20 5.00 20
Power
10 2.50 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump S8900N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
80
70
70 Hz
60
65 Hz
50
60 Hz
Head
(ft)
40 55 Hz
50 Hz
30
20
10
70 Hz
5.00
65 Hz
4.00
60 Hz
Power 3.00
(hp) 55 Hz
2.00 50 Hz
1.00
Back to Pumps
Pumps
17.50 7.00 70
15.00 6.00 60
Efficiency
7.50 3.00 30
5.00 2.00 20
Power
2.50 1.00 10
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump S8900N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
25.00
22.50
20.00
70 Hz
17.50
65 Hz
15.00
Head 60 Hz
(m)
12.50 55 Hz
10.00 50 Hz
7.50
5.00
2.50
70 Hz
5.00
65 Hz
4.00
60 Hz
Power 3.00
(hp) 55 Hz
2.00 50 Hz
1.00
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 2,750
Capacity (m /d)
3
Back to Pumps
HN13500 Pump
Back to Pumps
HN13500 Pump, 562 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 70 80 90 100 110 120 130 140
Housing of Stages
150 60 1† 1†
160 64 2†
170 69 1† 1†
180 74 2†
190 78 1† 1†
200 82 2†
210 86 1† 1†
220 90 2†
Note: Stage counts are for C-CT-ES pumps.
† Requiresuse of high-strength shaft in lower most pump
Back to Pumps
Pumps
Optimum operating range 5,000–18,000 B/D Shaft brake-power limit Standard 375 hp
Nominal housing diameter 5.38 in. High strength 600 hp
Shaft diameter 1.000 in. Housing burst-pressure limit Standard 3,000 psi
Shaft cross-sectional area 0.785 in.2 Buttress Not applicable Power Efficiency
Min. casing size 7.000 in. Welded 3,600 psi (hp) (%)
Head
60 15.00 60
50 12.50 50
40 10.00 40
Head Efficiency
(ft)
30 7.50 30
20 Power 5.00 20
Operating range
10 2.50 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump HN13500 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
80
65 Hz
70
60 Hz
60
55 Hz
50
Head 50 Hz
(ft)
40
30
20
10
10.00
70 Hz
9.00
8.00 65 Hz
7.00
6.00 60 Hz
Power
5.00 55 Hz
(hp)
4.00
50 Hz
3.00
2.00
1.00
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000
Capacity (B/D)
Back to Pumps
Pumps
15.00 15.00 60
Head
10.00 10.00 40
Head
(m) Efficiency
7.50 7.50 30
5.00 5.00 20
Power
2.50 2.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump HN13500 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
25.00
65 Hz
22.50
20.00 60 Hz
17.50
55 Hz
15.00
Head 50 Hz
(m) 12.50
10.00
7.50
5.00
2.50
10.00
70 Hz
9.00
8.00 65 Hz
7.00
6.00 60 Hz
Power
5.00 55 Hz
(hp)
4.00
50 Hz
3.00
2.00
1.00
Back to Pumps
HN15000 Pump
Back to Pumps
HN15000 Pump, 562 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 70 80 90 100 110 120 130
Housing of Stages
150 60 1† 1†
160 64 2†
170 69 1† 1†
180 74 2†
190 78 1† 1†
200 82 2†
Note: Stage counts are for C-CT-ES pumps.
† Requiresuse of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 12,000–18,000 B/D Shaft brake-power limit Standard 375 hp
Nominal housing diameter 5.63 in. High strength 600 hp
Shaft diameter 1.000 in. Housing burst-pressure limit Standard 3,000 psi
Shaft cross-sectional area 0.785 in.2 Buttress Not applicable Power Efficiency
Min. casing size 7.000 in. Welded 3,600 psi (hp) (%)
Head
60 15.00 60
Operating range
50 12.50 50
40 10.00 40
Efficiency
Head
(ft)
30 7.50 30
Power
20 5.00 20
10 2.50 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump HN15000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
90
80
70
70 Hz
60
65 Hz
Head 50
(ft) 60 Hz
40 55 Hz
50 Hz
30
20
10
70 Hz
10.00
65 Hz
7.50 60 Hz
Power
(hp) 55 Hz
5.00
50 Hz
2.50
Back to Pumps
Pumps
Operating range
12.50 12.50 50
10.00 10.00 40
Efficiency
Head
(m)
7.50 7.50 30
5.00 5.00 20
Power
2.50 2.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump HN15000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
25
20
70 Hz
65 Hz
Head 15 60 Hz
(m)
55 Hz
10 50 Hz
70 Hz
10.00
65 Hz
7.50 60 Hz
Power
(hp) 55 Hz
5.00
50 Hz
2.50
Back to Pumps
H15500N Pump
Back to Pumps
H15500 Pump, 562 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 48† 2
170 51† 1 1
180 54† 1 1
190 57† 1 1
200 60† 2
210 63† 1 1
220 66† 2
230 70† 1 1
240 74† 2
250 77† 1 1
260 80† 2
270 83† 1 1
280 86† 2‡
290 89† 1‡ 1‡
300 92† 2‡
310 93† 2‡ 1‡
320 96†, § 1‡ 2‡
Note: Stage count for FL-CT-ES Pump
† Requires use of high load bearing in protector for compression pumps
‡ Requires use of high-strength shaft in lowermost pump
§ Requires use of high load bearing in protector for floater pumps
Back to Pumps
Pumps
Optimum operating range 11,000–20,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 5.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 3,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress Not applicable Power Efficiency
Min. casing size 7.000 in. Welded Not applicable (hp) (%)
70 35 70
60 Head 30 60
50 25 50
Head 40 Efficiency 20 40
(ft)
Operating range
30 15 30
20 10 20
Power
10 5 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump H15500N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 70 Hz
65 Hz
60
60 Hz
50
55 Hz
Head
(m) 40
50 Hz
30
20
10
12.50
70 Hz
10.00
65 Hz
Power 7.50 60 Hz
(hp)
55 Hz
5.00
50 Hz
2.50
Back to Pumps
Pumps
17.50 17.50 70
15.00 15.00 60
Operating range
5.00 5.00 20
Power
2.50 2.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump H15500N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
22.50
65 Hz
20.00
17.50 60 Hz
15.00 55 Hz
Head 12.50 50 Hz
(m)
10.00
7.50
5.00
2.50
12.50
70 Hz
10.00
65 Hz
Power 7.50 60 Hz
(hp)
55 Hz
5.00
50 Hz
2.50
Back to Pumps
H21500N Pump
Back to Pumps
H21500N Pump, 562 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 70 80 90 100 110 120 130 140
Housing of Stages
160 50 2
170 53 1 1
180 56 2†
190 59 1† 1†
200 62 2†
210 65 1† 1†
220 68 2†
230 72 1† 1†
240 76 2†
250 79 1† 1†
260 82 2†
270 85 1† 1†
Note: Stage counts are for C-CT-ES pumps.
† Requiresuse of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 17,500–24,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 5.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 3.000 psi
Shaft cross-sectional area 1.108 in.2 Buttress Not applicable Power Efficiency
Min. casing size 7 in. Welded 3,600 psi (hp) (%)
70 35 70
60 30 60
Head
50 25 50
Head 40 20 40
(ft) Efficiency
30 15 30
20 10 20
Power
10 5 10
Operating range
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump H21500N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
80 70 Hz
70 65 Hz
60 60 Hz
50 55 Hz
Head
(ft) 50 Hz
40
30
20
10
70 Hz
17.50
15.00 65 Hz
12.50 60 Hz
Power 10.00
(hp) 55 Hz
7.50 50 Hz
5.00
2.50
Back to Pumps
Pumps
17.50 17.50 70
7.50 7.50 30
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump H21500N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
22.50 70 Hz
65 Hz
20.00
17.50 60 Hz
15.00 55 Hz
Head 12.50 50 Hz
(m)
10.00
7.50
5.00
2.50
70 Hz
17.50
15.00 65 Hz
12.50
60 Hz
Power 10.00
(hp) 55 Hz
7.50 50 Hz
5.00
2.50
Back to Pumps
H28000N Pump
Back to Pumps
H28000N Pump, 562 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 50 2†
170 53 1† 1†
180 56 2†
190 59 1† 1†
200 62 2†
Note: Stage counts are for C-CT-ES pumps.
† Requiresuse of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 28,000–36,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 5.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 3,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress Not applicable Power Efficiency
Min. casing size 7.000 in. Welded 3,600 psi (hp) (%)
60 Efficiency 60 60
Head
50 50 50
40 40 40
Head
(ft)
30 30 30
Operating range
20 20 20
Power
10 10 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump H28000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70
70 Hz
60 65 Hz
50 60 Hz
55 Hz
Head 40
(ft)
50 Hz
30
20
10
25.00 70 Hz
22.50
20.00 65 Hz
17.50
60 Hz
Power 15.00
(hp) 12.50 55 Hz
10.00 50 Hz
7.50
5.00
2.50
Back to Pumps
Pumps
15.00 30 60
Efficiency
10.00 20 40
Head
(m)
7.50 15 30
5.00 10 20
Power
2.50 5 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump H28000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
22.50
70 Hz
20.00
65 Hz
17.50
15.00 60 Hz
Head 55 Hz
12.50
(m)
50 Hz
10.00
7.50
5.00
2.50
25.00 70 Hz
22.50
20.00 65 Hz
17.50
60 Hz
Power 15.00
(hp) 12.50 55 Hz
10.00 50 Hz
7.50
5.00
2.50
Back to Pumps
J7000N Pump
Back to Pumps
J7000N Pump, 675 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 52 2
170 55 1 1
180 58 2
190 62 1 1
Note: Stage counts are for C-CT-ES pumps
Back to Pumps
Pumps
Optimum operating range 4,500–9,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 6.75 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 1.188 in.2 Buttress 3,060 psi Power Efficiency
Min. casing size 8.625 in. Welded 3,060 psi (hp) (%)
175 35 70
150 Efficiency 30 60
Operating range
125 25 50
Head
Head 100 20 40
(ft)
75 15 30
50 10 20
25 Power 5 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump J7000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
125 65 Hz
60 Hz
100
55 Hz
Head 75 50 Hz
(ft)
50
25
12.50
70 Hz
10.00
65 Hz
Power 7.50 60 Hz
(hp)
55 Hz
5.00
2.50 50 Hz
Back to Pumps
Pumps
35 17.50 70
Efficiency
30 15.00 60
Operating range
25 12.50 50
Head
Head 20 10.00 40
(m)
15 7.50 30
10 5.00 20
5 Power 2.50 10
0 0 0
0 250 500 750 1,000 1,250 1,500 1,750
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump J7000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
45
70 Hz
40
65 Hz
35
60 Hz
30
55 Hz
Head 25
(m)
50 Hz
20
15
10
12.50
70 Hz
10.00
65 Hz
Power 7.50
(hp) 60 Hz
55 Hz
5.00
2.50 50 Hz
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500
Capacity (m /d)
3
Back to Pumps
J12000N Pump
Back to Pumps
J12000N Pump, 675 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 46 2
170 49 1 1
180 52 2
190 55 1† 1†
200 58 2†
210 61 1† 1†
220 64 2†
Note: Stage counts are for C-CT-ES pumps.
† Requiresuse of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 8,000–18,500 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 6.75 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 1.108 in.2 Buttress 3,060 psi Power Efficiency
Min. casing size 8.625 in. Welded 3,060 psi (hp) (%)
175 35 70
Efficiency
150 30 60
Operating range
125 25 50
Head
Head 100 20 40
(ft)
75 15 30
50 10 20
Power
25 5 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump J12000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
125
65 Hz
100 60 Hz
55 Hz
Head 75
(ft) 50 Hz
50
25
70 Hz
17.50
15.00 65 Hz
12.50 60 Hz
Power 10.00
(hp) 55 Hz
7.50 50 Hz
5.00
2.50
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000 27,500
Capacity (B/D)
Back to Pumps
Pumps
35 17.50 70
Efficiency
30 15.00 60
Operating range
25 12.50 50
Head
Head 20 10.00 40
(m)
15 7.50 30
10 5.00 20
Power
5 2.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump J12000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
45
70 Hz
40
65 Hz
35
60 Hz
30
Head 55 Hz
25
(m)
50 Hz
20
15
10
70 Hz
17.50
15.00 65 Hz
12.50
60 Hz
Power 10.00
(hp) 55 Hz
7.50 50 Hz
5.00
2.50
Back to Pumps
JN16000 Pump
Back to Pumps
JN16000 Pump, 675 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 46 2
170 49 1 1
180 52 2
190 55 1 1
200 58 2†
210 61 1† 1†
220 64 2†
230 67 1† 1†
240 70 2†
250 73 1† 1†
260 76 2†
270 79 1† 1†
Note: Stage counts are for C-CT-ES pumps.
† Requiresuse of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 12,800–19,500 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 6.75 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 1.108 in.2 Buttress 3,060 psi Power Efficiency
Min. casing size 8.625 in. Welded 3,060 psi (hp) (%)
175 35 70
Efficiency
150 30 60
125 25 50
Operating range
Head 100 20 40
(ft) Head
75 15 30
50 Power 10 20
25 5 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump JN16000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
125
70 Hz
100
65 Hz
60 Hz
Head 75
(ft) 55 Hz
50 Hz
50
25
17.50 70 Hz
15.00
65 Hz
12.50
60 Hz
Power 10.00
(hp) 55 Hz
7.50
50 Hz
5.00
2.50
Back to Pumps
Pumps
Head
17.50 17.50 70
15.00 15.00 60
12.50 12.50 50
Efficiency
Head 10.00 10.00 40
(m)
7.50 7.50 30
Power
5.00 5.00 20
2.50 2.50 10
Operating range
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump JN16000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
35
70 Hz
30
65 Hz
25 60 Hz
Head 55 Hz
20
(m)
50 Hz
15
10
17.50 70 Hz
15.00
65 Hz
12.50
60 Hz
Power 10.00
(hp) 55 Hz
7.50
50 Hz
5.00
2.50
Back to Pumps
JN21000 Pump
Back to Pumps
JN21000 Pump, 675 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 46 2
170 49 1 1
180 52 2
190 55 1 1
200 58 2†
210 61 1† 1†
220 64 2†
230 67 1† 1†
240 70 2†
Note: Stage counts are for C-CT-ES pumps.
† Requiresuse of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 16,000–25,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 6.75 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 1.108 in.2 Buttress 3,060 psi Power Efficiency
Min. casing size 8.625 in. Welded 3,060 psi (hp) (%)
150 30 60
Efficiency
125 25 50
Operating range
100 20 40
Head Head
(ft)
75 15 30
50 Power 10 20
25 5 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump JN21000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
125
100
70 Hz
Head 65 Hz
75
(ft)
60 Hz
55 Hz
50 50 Hz
25
17.50 70 Hz
15.00
65 Hz
12.50
60 Hz
Power 10.00
(hp) 55 Hz
7.50
50 Hz
5.00
2.50
Back to Pumps
Pumps
30 15.00 60
Efficiency
25 12.50 50
Operating range
20 10.00 40
Head
Head
(m)
15 7.50 30
Power
10 5.00 20
5 2.50 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump JN21000 Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
35
30
70 Hz
25
65 Hz
Head 20 60 Hz
(m)
55 Hz
15 50 Hz
10
17.50 70 Hz
15.00
65 Hz
12.50
60 Hz
Power 10.00
(hp) 55 Hz
7.50
50 Hz
5.00
2.50
Back to Pumps
L16000N Pump
Back to Pumps
L16000N Pump, 725 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 38 2†
170 41 1† 1†
180 44 2†
190 46 1† 1†
200 48 2†
210 51 1† 1†
220 54 2†
230 56 1† 1†
240 58 2†
250 61 1† 1†
Note: Stage counts are for C-CT-ES pumps.
† Requiresuse of high-strength shaft in lowermost pump
Back to Pumps
Pumps
Optimum operating range 11,000–20,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 7.25 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard Not applicable
Shaft cross-sectional area 1.108 in.2 Buttress 3.500 psi Power Efficiency
Min. casing size 9.625 in. Welded 3,500 psi (hp) (%)
175 70 70
Efficiency
150 60 60
Operating range
125 Head 50 50
Head 100 40 40
(ft)
75 30 30
50 20 20
Power
25 10 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump L16000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
150 70 Hz
65 Hz
125
60 Hz
100
55 Hz
Head
(ft)
50 Hz
75
50
25
70 Hz
25
65 Hz
20
60 Hz
Power 15
(hp) 55 Hz
10
50 Hz
5
Back to Pumps
Pumps
35 35 70
Efficiency
30 30 60
Operating range
Head
25 25 50
Head 20 20 40
(m)
15 15 30
10 10 20
Power
5 5 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump L16000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
45
40 65 Hz
35
60 Hz
30
55 Hz
Head 25
(m) 50 Hz
20
15
10
70 Hz
25
20 65 Hz
60 Hz
Power 15
(hp) 55 Hz
10
50 Hz
5
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (m /d)
3
Back to Pumps
L43000N Pump
Back to Pumps
L43000N Pump, 725 Series, Tandem Combinations
Tandem Housing Sections–Number
Pump Number 80 90 100 110 120 130 140 150
Housing of Stages
160 32 2†
170 34 1† 1†
180 36 2†
190 38 1† 1†
200 40 2†
210 42‡ 1† 1†
220 44‡ 2†
230 46‡ 1† 1†
240 48‡ 2†
Note: Stage counts are for C-CT-ES pumps.
† Requires use of high-strength shaft in lowermost pump
‡ Requires use of buttress threads in uppermost pump
Back to Pumps
Pumps
Optimum operating range 36,000–54,000 B/D Shaft brake-power limit Standard 1,000 hp
Nominal housing diameter 7.25 in. High strength 1,500 hp
Shaft diameter 1.500 in. Housing burst-pressure limit Standard 2,000 psi
Shaft cross-sectional area 1.767 in.2 Buttress 3.500 psi Power Efficiency
Min. casing size 9.625 in. Welded 3,500 psi (hp) (%)
175 175 70
Efficiency
150 150 60
75 75 30
50 50 20
25 Power 25 10
0 0 0
0 10,000 20,000 30,000 40,000 50,000 60,000 70,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump L43000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
125
70 Hz
100
65 Hz
60 Hz
Head 75
(ft) 55 Hz
50 Hz
50
25
70 Hz
50
65 Hz
40
60 Hz
Power 30
(hp) 55 Hz
20 50 Hz
10
Back to Pumps
Pumps
35 70 70
30 60 60
Efficiency
25 50 50
Operating range
Head
Head 20 40 40
(m)
15 30 30
10 20 20
Power
5 10 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump L43000N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
35
70 Hz
30
65 Hz
25 60 Hz
Head
(m) 55 Hz
20
50 Hz
15
10
50 70 Hz
40 65 Hz
60 Hz
Power 30
(hp)
55 Hz
20 50 Hz
10
Back to Pumps
M520 Pump
Back to Pumps
862 Series, Min. Casing Size 10 3⁄4-in. [273.1-mm] OD
Carbon Steel ES Carbon Steel
C-CT C-CT-ES
Housing Length, Weight, Max. ‘A’ Cut ‘B’ Cut ‘A’ Cut ‘B’ Cut
ft [m] lbm [kg] Stages Part Number Part Number Part Number Part Number
2M 2.5 [0.8] 271 [123] 2 1139047 1139302 tba† tba
3M 3.1 [1.0] 342 [155] 3 1139054 1139310 tba tba
4M 3.8 [1.2] 402 [183] 4 1139062 1139328 tba tba
5M 4.4 [1.3] 455 [207] 5 1139070 1139336 tba tba
6M 5.0 [1.5] 544 [247] 6 1139088 1139344 tba tba
7M 5.6 [1.7] 604 [274] 7 1139096 1139351 R139096 tba
8M 6.2 [1.9] 678 [308] 8 1139104 1139369 1237114 tba
9M 6.8 [2.1] 745 [338] 9 1139112 1139377 tba tba
10M 7.4 [2.3] 805 [365] 10 1139120 1139385 tba tba
11M 8.0 [2.4] 873 [396] 11 1139138 1139393 tba tba
12M 8.6 [2.6] 940 [427] 12 1139146 1139401 1200880 tba
13M 9.2 [2.8] 1,007 [457] 13 1139153 1139419 D13915Z tba
14M 9.8 [3.0] 1,074 [488] 14 1139161 1139427 tba tba
15M 10.4 [3.2] 1,142 [518] 15 1139179 1139435 tba tba
16M 11.0 [3.4] 1,209 [549] 16 1139187 1139443 tba tba
17M 11.6 [3.5] 1,280 [581] 17 1139195 1139450 tba tba
18M 12.2 [3.7] 1,347 [612] 18 1139203 1139468 1319946 tba
19M 12.8 [3.9] 1,411 [641] 19 1139211 1139476 tba tba
20M 13.4 [4.1] 1,478 [671] 20 1139229 1139484 tba tba
21M 14.0 [4.3] 1,549 [703] 21 1139237 1139492 tba tba
22M 14.6 [4.5] 1,616 [734] 22 1139245 1139500 2005623 tba
23M 15.2 [4.6] 1,680 [763] 23 1139252 1139518 1200898 tba
24M 15.8 [4.8] 1,747 [793] 24 1139260 1139526 tba tba
25M 16.4 [5.0] 1,818 [825] 25 1139278 1139534 tba tba
26M 17.0 [5.2] 1,885 [856] 26 1139286 1139542 tba tba
27M 17.6 [5.4] 1,952 [886] 27 1139294 1139559 tba tba
28M 18.3 [5.6] 2,019 [917] 28 tba tba tba tba
29M 20.1 [6.1] 2,155 [978] 29 tba tba tba tba
30M 20.7 [6.3] 2,222 [1,009] 30 tba tba tba tba
31M 21.3 [6.5] 2,289 [1,039] 31 tba tba tba tba
† to be assigned
Back to Pumps
862 Series, Min. Casing Size 10 3⁄4-in. [273.1-mm] OD
ARZ Carbon Steel
C-CT-ARZ
Housing Length, Weight, Max. ‘A’ Cut ‘B’ Cut
ft [m] lbm [kg] Stages Part Number Part Number
2M 2.5 [0.8] 271 [123] 2 1149467 1336445
3M 3.1 [1.0] 342 [155] 3 1149475 1149723
4M 3.8 [1.2] 402 [183] 4 1149483 1149731
5M 4.4 [1.3] 455 [207] 5 1149491 1336452
6M 5.0 [1.5] 544 [247] 6 1149509 1149749
7M 5.6 [1.7] 604 [274] 7 1149517 1149756
8M 6.2 [1.9] 678 [308] 8 1149525 1336460
9M 6.8 [2.1] 745 [338] 9 1149533 1336478
10M 7.4 [2.3] 805 [365] 10 1149541 1149764
11M 8.0 [2.4] 873 [396] 11 1149558 1336486
12M 8.6 [2.6] 940 [427] 12 1149566 1336494
13M 9.2 [2.8] 1,007 [457] 13 1149574 1336502
14M 9.8 [3.0] 1,074 [488] 14 1149582 1149772
15M 10.4 [3.2] 1,142 [518] 15 1149590 1149780
16M 11.0 [3.4] 1,209 [549] 16 1149608 1336510
17M 11.6 [3.5] 1,280 [581] 17 1149616 1336528
18M 12.2 [3.7] 1,347 [612] 18 1149624 1149798
19M 12.8 [3.9] 1,411 [641] 19 1149632 1336536
20M 13.4 [4.1] 1,478 [671] 20 1149640 1149806
21M 14.0 [4.3] 1,549 [703] 21 1149657 1336544
22M 14.6 [4.5] 1,616 [734] 22 1149665 1149814
23M 15.2 [4.6] 1,680 [763] 23 1149673 1336551
24M 15.8 [4.8] 1,747 [793] 24 1149681 1336569
25M 16.4 [5.0] 1,818 [825] 25 1149699 1336577
26M 17.0 [5.2] 1,885 [856] 26 1149707 1336585
27M 17.6 [5.4] 1,952 [886] 27 1149715 1336593
28M 18.3 [5.6] 2,019 [917] 28 1249606 1336601
29M 20.1 [6.1] 2,155 [978] 29 1336411 1336619
30M 20.7 [6.3] 2,222 [1,009] 30 1277003 tba†
31M 21.3 [6.5] 2,289 [1,039] 31 2006500 tba
† to be assigned
Back to Pumps
Pumps
Optimum operating range 12,000–20,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 8.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 2,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress 2,400 psi Power Efficiency
Min. casing size 10.75 in. Welded 2,400 psi (hp) (%)
175 70 70
Efficiency
150 Operating range 60 60
Head
125 50 50
Head 100 40 40
(ft)
75 30 30
50 20 20
Power
25 10 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M520A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
175 70 Hz
150 65 Hz
125 60 Hz
55 Hz
Head 100
(ft)
50 Hz
75
50
25
70 Hz
30
25 65 Hz
20 60 Hz
Power
(hp) 15 55 Hz
50 Hz
10
Back to Pumps
Pumps
35 35 70
Efficiency
30 Operating range 30 60
Head
25 25 50
Head 20 20 40
(m)
15 15 30
10 10 20
Power
5 5 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M520A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
50
65 Hz
40
60 Hz
55 Hz
Head 30
(m)
50 Hz
20
10
70 Hz
30
25 65 Hz
20 60 Hz
Power
(hp) 15 55 Hz
50 Hz
10
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500
Capacity (m /d)
3
Back to Pumps
Pumps
Optimum operating range 12,000–23,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 8.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 2,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress 2,400 psi Power Efficiency
Min. casing size 10.75 in. Welded 2,400 psi (hp) (%)
175 70 70
Efficiency
150 60 60
Operating range
125 Head 50 50
Head 100 40 40
(ft)
75 30 30
50 20 20
Power
25 10 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M520B Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
150
70 Hz
125 65 Hz
60 Hz
100
Head 55 Hz
(ft)
75 50 Hz
50
25
70 Hz
22.5
20.0 65 Hz
17.5
15.0 60 Hz
Power 12.5
(hp) 55 Hz
10.0
50 Hz
7.5
5.0
2.5
Back to Pumps
Pumps
35 35 70
Efficiency
30 30 60
Operating range
Head
25 25 50
Head 20 20 40
(m)
15 15 30
10 10 20
Power
5 5 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M520B Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
50
45
70 Hz
40
65 Hz
35
60 Hz
30
Head
(m) 55 Hz
25
50 Hz
20
15
10
70 Hz
22.5
20.0 65 Hz
17.5
15.0 60 Hz
Power 12.5 55 Hz
(hp)
10.0
50 Hz
7.5
5.0
2.5
Back to Pumps
Pumps
Optimum operating range 12,000–22,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 8.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 2,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress 2,400 psi Power Efficiency
Min. casing size 10.75 in. Welded 2,400 psi (hp) (%)
175 35 70
Efficiency
150 30 60
Operating range
125 25 50
Head Head
100 20 40
(ft)
75 15 30
Power
50 10 20
25 5 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M520C Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
125
70 Hz
100 65 Hz
60 Hz
Head 75
(ft) 55 Hz
50 Hz
50
25
20.0 70 Hz
17.5
65 Hz
15.0
12.5 60 Hz
Power
(hp) 10.0 55 Hz
7.5 50 Hz
5.0
2.5
Back to Pumps
Pumps
35 17.5 70
Efficiency
30 15.0 60
Head
Head 20 10.0 40
(m)
15 7.5 30
Power
10 5.0 20
5 2.5 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M520C Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
35 70 Hz
30 65 Hz
60 Hz
25
Head
(m) 55 Hz
20
50 Hz
15
10
20.0 70 Hz
17.5
15.0 65 Hz
12.5 60 Hz
Power
(hp) 10.0 55 Hz
7.5 50 Hz
5.0
2.5
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (m /d) 3
Back to Pumps
M675 Pump
Back to Pumps
862 Series, Min. Casing Size 10 3⁄4-in. [273.1-mm] OD
Carbon Steel ES Carbon Steel
C-CT C-CT-ES
Housing Length, Weight, Max. ‘A’ Cut ‘B’ Cut ‘C’ Cut ‘A’ Cut ‘B’ Cut ‘C’ Cut
ft [m] lbm [kg] Stages Part Number Part Number Part Number Part Number Part Number Part Number
2M 2.5 [0.8] 271 [123] 2 1138239 1138502 1138775 tba† tba tba
3M 3.1 [1.0] 342 [155] 3 1138247 1138510 1138783 tba tba tba
4M 3.8 [1.2] 402 [183] 4 1138254 1138528 1138791 tba tba tba
5M 4.4 [1.3] 455 [207] 5 1138262 1138536 1138809 1185024 tba tba
6M 5.0 [1.5] 544 [247] 6 1138270 1138544 1138817 tba tba tba
7M 5.6 [1.7] 604 [274] 7 1138288 1138551 1138825 D13828Z tba tba
8M 6.2 [1.9] 678 [308] 8 1138296 1138569 1138833 tba M13856U tba
9M 6.8 [2.1] 745 [338] 9 1138304 1138577 1138841 tba tba tba
10M 7.4 [2.3] 805 [365] 10 1138312 1138585 1138858 tba tba tba
11M 8.0 [2.4] 873 [396] 11 1138320 1138593 1138866 tba tba tba
12M 8.6 [2.6] 940 [427] 12 1138338 1138601 1138874 tba tba tba
13M 9.2 [2.8] 1,007 [457] 13 1138346 1138619 1138882 tba tba tba
14M 9.8 [3.0] 1,074 [488] 14 1138353 1138627 1138890 tba tba tba
15M 10.4 [3.2] 1,142 [518] 15 1138361 1138635 1138908 D13836Z tba tba
16M 11.0 [3.4] 1,209 [549] 16 1138379 1138643 1138916 D13837Z tba tba
17M 11.6 [3.5] 1,280 [581] 17 1138387 1138650 1138924 tba tba tba
18M 12.2 [3.7] 1,347 [612] 18 1138395 1138668 1138932 tba tba tba
19M 12.8 [3.9] 1,411 [641] 19 1138403 1138676 1138940 tba tba tba
20M 13.4 [4.1] 1,478 [671] 20 1138411 1138684 1138957 tba tba tba
21M 14.0 [4.3] 1,549 [703] 21 1138429 1138692 1138965 tba tba tba
22M 14.6 [4.5] 1,616 [734] 22 1138437 1138700 1138973 tba tba tba
23M 15.2 [4.6] 1,680 [763] 23 1138445 1138718 1138981 tba tba tba
24M 15.8 [4.8] 1,747 [793] 24 1138452 1138726 1138999 tba tba tba
25M 16.4 [5.0] 1,818 [825] 25 1138460 1138734 1139005 tba tba tba
26M 17.0 [5.2] 1,885 [856] 26 1138478 1138742 1139013 tba tba tba
27M 17.6 [5.4] 1,952 [886] 27 1138486 1138759 1139021 tba tba tba
28M 18.3 [5.6] 2,019 [917] 28 1138494 1138767 1139039 tba tba tba
† to be assigned
Back to Pumps
862 Series, Min. Casing Size 10 3⁄4-in. [273.1-mm] OD
ARZ Carbon Steel
C-CT-ARZ
Housing Length, Weight, Max. ‘A’ Cut ‘B’ Cut ‘C’ Cut
ft [m] lbm [kg] Stages Part Number Part Number Part Number
2M 2.5 [0.76] 271 [123.03] 2 1149822 1149996 tba†
3M 3.1 [0.95] 342 [155.27] 3 1149830 1150002 tba
4M 3.8 [1.16] 402 [182.51] 4 1149848 1336742 tba
5M 4.4 [1.34] 455 [206.57] 5 1149855 1336759 tba
6M 5.0 [1.53] 544 [246.98] 6 1149863 1336767 tba
7M 5.6 [1.71] 604 [274.22] 7 1149871 1336775 tba
8M 6.2 [1.89] 678 [307.81] 8 1149889 1336783 tba
9M 6.8 [2.07] 745 [338.23] 9 1149897 1150010 tba
10M 7.4 [2.26] 805 [365.47] 10 1149905 1336791 tba
11M 8.0 [2.44] 873 [396.34] 11 1149913 1336809 tba
12M 8.6 [2.62] 940 [426.76] 12 1149921 1336817 tba
13M 9.2 [2.81] 1,007 [457.18] 13 1149939 1150028 tba
14M 9.8 [2.99] 1,074 [487.60] 14 1149947 1336825 tba
15M 10.4 [3.17] 1,142 [518.47] 15 1149954 1336833 1150036
16M 11.0 [3.36] 1,209 [548.89] 16 1149962 1336841 tba
17M 11.6 [3.54] 1,280 [581.12] 17 1149970 1336858 tba
18M 12.2 [3.72] 1,347 [611.54] 18 1336635 1336866 tba
19M 12.8 [3.90] 1,411 [640.59] 19 1336643 1336874 tba
20M 13.4 [4.09] 1,478 [671.01] 20 1252535 1336882 tba
21M 14.0 [4.27] 1,549 [703.25] 21 1336650 1336890 tba
22M 14.6 [4.45] 1,616 [733.66] 22 1336668 1336908 tba
23M 15.2 [4.64] 1,680 [762.72] 23 1336676 1336916 tba
24M 15.8 [4.82] 1,747 [793.14] 24 1336684 1336924 tba
25M 16.4 [5.00] 1,818 [825.37] 25 1336692 1336932 tba
26M 17.0 [5.19] 1,885 [855.79] 26 1336700 1336940 tba
27M 17.6 [5.37] 1,952 [886.21] 27 1336718 1336957 tba
28M 18.3 [5.58] 2,019 [916.63] 28 1149988 1336965 tba
† to be assigned
Back to Pumps
Pumps
Optimum operating range 19,000–32,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 8.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 2,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress 2,400 psi Power Efficiency
Min. casing size 10.75 in. Welded 2,400 psi (hp) (%)
175 175 70
Efficiency
125 125 50
75 75 30
50 50 20
25 Power 25 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M675A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
200
70 Hz
175
65 Hz
150
60 Hz
125
Head 55 Hz
(ft)
100
50 Hz
75
50
25
50 70 Hz
45
40 65 Hz
35
60 Hz
30
Power
(hp) 25 55 Hz
20 50 Hz
15
10
5
Back to Pumps
Pumps
35 Efficiency 70 70
25 50 50
Head 20 40 40
(m)
15 30 30
10 20 20
Power
5 10 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M675A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
60
70 Hz
50
65 Hz
60 Hz
40
Head 55 Hz
(m)
30 50 Hz
20
10
50 70 Hz
45
40 65 Hz
35
60 Hz
30
Power
(hp) 25 55 Hz
20 50 Hz
15
10
5
Back to Pumps
Pumps
Optimum operating range 19,000–29,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 8.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 2,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress 2,400 psi Power Efficiency
Min. casing size 10.75 in. Welded 2,400 psi (hp) (%)
175 70 70
Efficiency
Head
125 50 50
Head 100 40 40
(ft)
75 30 30
50 Power 20 20
25 10 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M675B Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
150
65 Hz
125
60 Hz
100 55 Hz
Head
(ft) 50 Hz
75
50
25
70 Hz
40
35 65 Hz
30
60 Hz
25
Power
(hp) 20 55 Hz
15 50 Hz
10
Back to Pumps
Pumps
35 Efficiency 70 70
30 Operating range 60 60
Head
25 50 50
Head 20 40 40
(m)
15 30 30
10 20 20
Power
5 10 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M675B Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
50
70 Hz
45
40 65 Hz
35 60 Hz
30
Head 55 Hz
(m)
25
50 Hz
20
15
10
70 Hz
40
35 65 Hz
30
60 Hz
25
Power
(hp) 20 55 Hz
15 50 Hz
10
Back to Pumps
Pumps
Optimum operating range 19,000–28,000 B/D Shaft brake-power limit Standard 637 hp
Nominal housing diameter 8.63 in. High strength 1,019 hp
Shaft diameter 1.188 in. Housing burst-pressure limit Standard 2,000 psi
Shaft cross-sectional area 1.108 in.2 Buttress 2,400 psi Power Efficiency
Min. casing size 10.75 in. Welded 2,400 psi (hp) (%)
175 70 70
Efficiency
150 60 60
Operating range
125 50 50
Head
Head 100 40 40
(ft)
75 30 30
50 20 20
Power
25 10 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M675C Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70 Hz
125
65 Hz
100
60 Hz
55 Hz
Head 75
(ft)
50 Hz
50
25
35 70 Hz
30
65 Hz
25
60 Hz
Power 20
(hp) 55 Hz
15
50 Hz
10
Back to Pumps
Pumps
35 35 70
Efficiency
30 30 60
Operating range
25 25 50
Head
Head 20 20 40
(m)
15 15 30
10 Power 10 20
5 5 10
0 0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump M675C Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40
70 Hz
35
65 Hz
30
60 Hz
25
Head 55 Hz
(m)
20 50 Hz
15
10
35 70 Hz
30
65 Hz
25
60 Hz
Power 20
(hp) 55 Hz
15
50 Hz
10
Back to Pumps
N1050 Pump
Back to Pumps
Pumps
Optimum operating range 24,000–47,500 B/D Shaft brake-power limit Standard 1,000 hp
Nominal housing diameter 9.50 in. High strength 1,600 hp
Shaft diameter 1.500 in. Housing burst-pressure limit Standard 2,300 psi
Shaft cross-sectional area 1.767 in.2 Buttress Not applicable Power Efficiency
Min. casing size 11.75 in. Welded 2,760 psi (hp) (%)
350 175 70
Efficiency
300 150 60
Head
Head 200 100 40
(ft)
150 75 30
100 Power 50 20
50 25 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000 50,000 55,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump N1050A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
250 70 Hz
65 Hz
200
60 Hz
Head 150 55 Hz
(ft)
50 Hz
100
50
90 70 Hz
80
65 Hz
70
60 Hz
60
Power
(hp) 40 55 Hz
30 50 Hz
20
10
Back to Pumps
Pumps
70 175 70
Efficiency
60 150 60
Operating range
50 125 50
Head
Head 40 100 40
(m)
30 75 30
20 50 20
Power
10 25 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump N1050A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
80
70 Hz
70
65 Hz
60
60 Hz
50
Head 55 Hz
(m)
40 50 Hz
30
20
10
90 70 Hz
80
65 Hz
70
60 60 Hz
Power 50
(hp) 55 Hz
40
50 Hz
30
20
10
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000
Capacity (m /d)
3
Back to Pumps
Pumps
Optimum operating range 24,000–43,000 B/D Shaft brake-power limit Standard 1,000 hp
Nominal housing diameter 9.50 in. High strength 1,600 hp
Shaft diameter 1.500 in. Housing burst-pressure limit Standard 2,300 psi
Shaft cross-sectional area 1.767 in.2 Buttress Not applicable Power Efficiency
Min. casing size 11.75 in. Welded 2,760 psi (hp) (%)
Head
175 175 70
150 150 60
Efficiency
125 125 50
50 50 20
Power
25 25 10
0 0 0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000 50,000 55,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump N1050B Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
225
70 Hz
200
65 Hz
175
60 Hz
150
Head 55 Hz
125
(ft)
50 Hz
100
75
50
25
70 70 Hz
60 65 Hz
40 60 Hz
Power
(hp) 55 Hz
30
50 Hz
20
10
Back to Pumps
Pumps
Head
70 70 70
40 60 60
30 50 50
Efficiency
Operating range
Head 20 40 40
(m)
15 30 30
Power
10 20 20
5 10 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump N1050B Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
70
70 Hz
60
65 Hz
50
60 Hz
Head 40 55 Hz
(m)
50 Hz
30
20
10
70 70 Hz
60
65 Hz
50
60 Hz
Power 40
(hp) 55 Hz
30
50 Hz
20
10
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000
Capacity (m /d)
3
Back to Pumps
N1400 Pump
Back to Pumps
Pumps
Optimum operating range 35,000–64,000 B/D Shaft brake-power limit Standard 1,500 hp
Nominal housing diameter 10.00 in. High strength 2,400 hp
Shaft diameter 1.750 in. Housing burst-pressure limit Standard 2,300 psi
Shaft cross-sectional area 2.405 in.2 Buttress Not applicable Power Efficiency
Min. casing size 11.75 in. Welded Not applicable (hp) (%)
350 350 70
Efficiency
Head
250 250 50
150 150 30
100 100 20
Power
50 50 10
0 0 0
0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump N1400A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
350
70 Hz
300
65 Hz
250
60 Hz
Head 200 55 Hz
(ft)
50 Hz
150
100
50
175 70 Hz
150
65 Hz
125
60 Hz
Power 100
(hp) 55 Hz
75
50 50 Hz
25
Back to Pumps
Pumps
70 175 70
Efficiency
50 125 50
Head 40 100 40
(m)
30 75 30
20 50 20
Power
10 25 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump N1400A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
100
70 Hz
90
65 Hz
80
60 Hz
70
60 55 Hz
Head
(m) 50 Hz
50
40
30
20
10
175 70 Hz
150
65 Hz
125
60 Hz
Power 100
(hp) 55 Hz
75
50 50 Hz
25
Back to Pumps
Pumps
Optimum operating range 35,000–60,000 B/D Shaft brake-power limit Standard 1,500 hp
Nominal housing diameter 10.00 in. High strength 2,400 hp
Shaft diameter 1.750 in. Housing burst-pressure limit Standard 2,300 psi
Shaft cross-sectional area 2.405 in.2 Buttress Not applicable Power Efficiency
Min. casing size 11.75 in. Welded Not applicable (hp) (%)
350 350 70
Efficiency
300 300 60
Operating range
250 Head 250 50
150 150 30
100 100 20
Power
50 50 10
0 0 0
0 10,000 20,000 30,000 40,000 50,000 60,000 70,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump N1400B Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
300
70 Hz
250 65 Hz
60 Hz
200
55 Hz
Head
(ft)
150 50 Hz
100
50
70 Hz
150
125 65 Hz
100 60 Hz
Power
(hp) 75 55 Hz
50 Hz
50
25
Back to Pumps
Pumps
70 175 70
Efficiency
60 150 60
Operating range
Head
50 125 50
Head 40 100 40
(m)
30 75 30
20 50 20
Power
10 25 10
0 0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump N1400B Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
90 70 Hz
80
65 Hz
70
60 Hz
60
55 Hz
Head 50
(m) 50 Hz
40
30
20
10
70 Hz
150
125 65 Hz
100 60 Hz
Power
(hp) 75 55 Hz
50
50 Hz
25
Back to Pumps
P2500A Pump
Back to Pumps
Pumps
Optimum operating range 53,486–96,001 B/D Shaft brake-power limit Standard 1,000 hp
Nominal housing diameter 11.25 in. High strength 1,600 hp
Shaft diameter 1.500 in. Housing burst-pressure limit Standard 1,400 psi
Shaft cross-sectional area 1.767 in.2 Buttress Not applicable Power Efficiency
Min. casing size 13.625 in. Welded Not applicable (hp) (%)
350 700 70
Head
300 600 60
250 500 50
Head Efficiency
200 400 40
(ft)
150 300 30
100 200 20
Power
50 100 10
Operating range
0 0 0
0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000
Capacity (B/D)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump P2500A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
400
350 70 Hz
300 65 Hz
60 Hz
250
Head
(ft) 55 Hz
200
50 Hz
150
100
50
250 70 Hz
225
200 65 Hz
175
60 Hz
150
Power
(hp) 125 55 Hz
100 50 Hz
75
50
25
Back to Pumps
Pumps
70 350 70
Efficiency
50 250 50
Head
(m) 40 200 40
30 150 30
20 100 20
Power
10 50 10
0 0 0
0 2,500 5,000 7,500 10,000 12,500 15,000
Capacity (m3⁄d)
This engineering performance curve represents nominal performance based on actual multistage testing and certification.
All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power,
and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Back to Pumps
REDA* Pump P2500A Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
125
70 Hz
100
65 Hz
Head 60 Hz
75
(m)
55 Hz
50 Hz
50
25
70 Hz
250
225
65 Hz
200
175
60 Hz
150
Power 55 Hz
125
(hp)
100 50 Hz
75
50
25
Back to Pumps
Pump Intakes and Gas Devices
Decription Length, ft [m] Weight, lbm [kg] Carbon Steel Part Number Redalloy* Part Number
Standard intake, 338/375 0.8 [0.2] 20 [9.1] 307157 492249
ARZ* intake, 338/375 0.8 [0.2] 20 [9.1] 1146372 1129543
Pumps n Pump Intakes and Gas Devices © Schlumberger 2008. All rights reserved.
*Mark of Schlumberger
Other company, product, and service names are the properties of their respective owners.
Intake: ARZ,
1.2 [0.4] 50 [22.7] 1242320 1156942
high-strength shaft
Intake: ARZ ZS 1.2 [0.4] 50 [22.7] tba† 1346204
Intake: ARZ ZS,
1.2 [0.4] 50 [22.7] 1297829 tba
high-strength shaft
Intake: ARZ SS 1.2 [0.4] 50 [22.7] tba 1334770
Intake: ARZ SS,
1.2 [0.4] 50 [22.7] tba 2003387
high-strength shaft
†to be assigned
400 Series AGH* Advanced Gas Handler, D5-21 (500- to 2,100-bbl/d Capacity)
Decription Length, ft [m] Weight, lbm [kg] Carbon Steel Part Number Redalloy Part Number
AGH D5-21, FL-CT ES,
6.3 [1.9] 135 [61.4] 1236686 1251941
high-strength shaft
AGH D5-21, FL-CT ARZ,
6.3 [1.9] 135 [61.4] 1252279 1251925
high-strength shaft
AGH D5-21, CR-CT ES,
6.3 [1.9] 135 [61.4] 1237890 1251743
high-strength shaft
AGH D5-21, CR-CT ARZ,
6.3 [1.9] 135 [61.4] 1252444 1251453
high-strength shaft
Pumps n Pump Intakes and Gas Devices © Schlumberger 2008. All rights reserved.
*Mark of Schlumberger
540 Series AGH Advanced Gas Handler, G20-40 (2,000- to 4,000-bbl/d Capacity)
Decription Length, ft [m] Weight, lbm [kg] Carbon Steel Part Number Redalloy Part Number
AGH G20-40, FL-CT ES,
6.3 [1.9] 272 [123.6] 1295682 1295708
high-strength shaft
AGH G20-40, FL-CT ARZ,
6.3 [1.9] 272 [123.6] 1294115 1295120
high-strength shaft
AGH G20-40, CR-CT ES,
6.3 [1.9] 272 [123.6] 1295955 1295997
high-strength shaft
AGH G20-40, CR-CT ES-ZS,
6.3 [1.9] 272 [123.6] 2004363 tba
high-strength shaft
AGH G20-40, CR-CT ARZ,
6.3 [1.9] 272 [123.6] 1295930 1295971
high-strength shaft
AGH G20-40, CR-CT ARZ ZS,
6.3 [1.9] 272 [123.6] 1335421 1340025
high-strength shaft
AGH G20-40, CR-CT ARZ SS,
6.3 [1.9] 272 [123.6] tba† 2007919
high-strength shaft
†to be assigned
538 Series AGH Advanced Gas Handler, S70-100 (7,000- to 10,000-bbl/d Capacity)
Decription Length, ft [m] Weight, lbm [kg] Carbon Steel Part Number Redalloy Part Number
AGH S70-100, FL-CT ES,
6.3 [1.9] 284 [129.1] 1246008 1254614
high-strength shaft
AGH S70-100, FL-CT ARZ,
6.3 [1.9] 284 [129.1] 1254580 1254598
high-strength shaft
AGH S70-100, CR-CT ES,
6.3 [1.9] 284 [129.1] 1254622 1254606
high-strength shaft
AGH S70-100, CR-CT ARZ,
6.3 [1.9] 284 [129.1] 1254564 1254572
high-strength shaft
Nomenclature Definitions
Type Description
66L Two-chambered labyrinth design
SB Positive seal protector using a single elastomeric bag
DB Positive seal protector with two elastomeric bags connected in parallel
PF Prefilled protector
HL High-load thrust bearing
HSS Indicates the use of high-strength shaft
HTM Indicates the use of high-temperature materials in the protector
Back to Protectors
Elastomer Application Guidelines
Performance Ratings
Elastomer Neoprene/Nitrile Carboxynitrile HSN Viton® Aflas®
Temperature limit, °F [°C] 250 [121] 275 [135] 300 [149] 351 [177] 399 [204]
Water/oil 1 1 1 2 1
Hydrogen sulfide 1 3 1 4 1
Amines 3 3 3 4 1
Polar chemicals 4 4 1–2 3 3
Carbon dioxide 2 2 2 4 2
Definition of ratings: 1 = Excellent—long-term resistance (low swell, high retention of physical properties); 2 = Good—long-term resistance (moderate swell, good retention of physical properties);
3 = Fair—depends on exposure time and temperature (good short-term resistance); 4 = Poor—no resistance, even in the short term
Note: Temperature limit indicates maximum operating temperature for the elastomers. An elastomeric component will operate at a higher temperature than the ambient wellbore temperature, depending on its location
in the equipment. Consult your Schlumberger representative for specific application assistance.
Back to Protectors
Advanced Motor Protector
Back to Protectors
The advanced protector system can Specifications
operate in high-temperature and high-
H2S environments. It improves ESP OD, in. [mm] 5.130 [130.30]
performance in such environments, Max. bottomhole temperature, °F [°C] 425 [218]
significantly increasing operating Length Dictated by system configuration
reliability. Metallurgy Carbon steel or Redalloy* high-nickel alloy
The high-temperature advanced Chambers Metal bellows, bag, or labyrinth
protector has a proven success record Shaft diameter, in. [mm] 1.187 [30.15]
in many steamflood injection applica- Deviation angle, ° 0–90
tions at its maximum operating limits.
Back to Protectors
Modular Protector Configurations
Back to Protectors
540 Series Modular (Bolts to 540 and 562 Series Motors)
Description Length, Weight, Carbon Steel Redalloy*
ft [m] lbm [kg] Part Number Part Number
LSL 6.5 [2.0] 276 [125.3] 1068394 1069871
LSL-HL 6.5 [2.0] 276 [125.3] 1067693 1069863
LSB 6.5 [2.0] 282 [128.0] 1068402 1069889
LSB-HL 6.5 [2.0] 282 [128.0] 1133289 K06840A
BSL 6.5 [2.0] 285 [129.4] 1075530 1136068
BSB 6.5 [2.0] 292 [132.6] 1134873 tba†
BSB-HL 6.5 [2.0] 292 [132.6] 1263631 tba
LSLSL 8.9 [2.7] 370 [168.0] 1076371 1074533
LSBPB 8.9 [2.7] 382 [173.4] 1045400 1069913
LSLSL-HL 8.9 [2.7] 370 [168.0] 1067685 1069855
LSBPB-HL 8.9 [2.7] 382 [173.4] 1067701 1069848
LSLSB-HL 8.9 [2.7] 370 [168.0] 1108547 1133941
LSLSL-HL-HSS 8.9 [2.7] 370 [168.0] 2006413 1309244
BSBSL 8.9 [2.7] 382 [173.4] 1075548 tba
BPBSL-HL 8.9 [2.7] 382 [173.4] 1108505 1180330
† to be assigned
Back to Protectors
325 Maximus Protector
Back to Protectors
325 REDA Maximus Protector—Single/Lower Tandem with AFLAS® Elastomers
Back to Protectors
400/456 Maximus Protectors
Back to Protectors
400/456 REDA Maximus Protector—Upper Tandem with HSN Elastomers
Back to Protectors
400/456 REDA* Maximus* Protector—Single/Lower Tandem with Aflas® Elastomers
Back to Protectors
400/456 REDA Maximus Protector—Upper Tandem with Aflas Elastomers
Back to Protectors
540 Maximus Protector
Back to Protectors
540 REDA Maximus Protector—Single/Lower Tandem with Aflas® Elastomers
Back to Protectors
REDA ESP Motors
All REDA* ESP motors are designed REDA ESP Motor Capacity Ranges
for reliable operation in the extreme
environments common to oilwell Power Rating, hp
applications. Min. Casing OD, in. [mm] Motor Series Frequency, 60 Hz Frequency, 50 Hz
The motors are two-pole, three- 4.500 [114.3] 375 7.5–233 6.3–198
phase squirrel-cage induction type, 5.500 [139.7] 456 12.0–432 10.0–360
and handwound. They are filled with 7.000 [177.8] 540 20.0–750 16.5–562
a highly refined mineral oil to provide 7.000 [177.8] 562 30.0–1,170 25.0–975
dielectric strength, lubrication for 8.625 [219.1] 738 250.0–1,500 208.0–1,250
bearings, and thermal conductivity.
The motor thrust bearing carries the
load of the rotors. Heat generated by
the motor is transferred to the well
fluid as it flows by the motor housing.
Corrosion protection is provided
with flame spray coatings or ferritic
steel construction. High-temperature,
high-load thrust bearings and high-
strength shafts are available. To
reduce power costs, all motors feature
proprietary winding configurations to
optimize electrical performance and
improve efficiency.
The Dominator* motor series 456,
562, and 738 feature a comprehensive
new rotor and stator design that cost
effectively delivers the best perform-
ance available for wells with 51⁄2-in.
[139.7-mm] and larger casing.
Return to Motors
Dominator Motors
Return to Motors
Bolt-On Motor Bases
Return to Motors
375 Series Motors
Return to Motors
375 Series Motors—SX Type
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
14 475 12 396 14.0 UT 6.3 [1.9] 208 [94] 1210095 tba†
19 465 16 387 20.5 UT 8.2 [2.5] 270 [123] 1210103 tba
UT 11.1 [3.4] 361 [164] 1210111 tba
28 475 23 396 28.0
CT 11.1 [3.4] 361 [164] 1210210 tba
UT 13.8 [4.2] 456 [207] 1210129 tba
360 300 51.0
CT 13.9 [4.2] 456 [207] 1210228 tba
36 30
UT 13.8 [4.2] 456 [207] 1210137 tba
387 322 38.0
CT 13.9 [4.2] 456 [207] 1210236 tba
UT 15.7 [4.8] 514 [233] 1210145 tba
415 346 51.5
CT 15.8 [4.8] 514 [233] 1210244 tba
41 34
UT 15.7 [4.8] 514 [233] 1210152 tba
440 367 39.0
CT 15.8 [4.8] 514 [233] tba tba
UT 17.6 [5.4] 660 [300] 1210160 tba
475 396 51.0
CT 17.7 [5.4] 660 [300] 1210251 tba
UT 17.6 [5.4] 660 [300] 1210178 tba
640 533 37.0
CT 17.7 [5.4] 660 [300] 1210269 tba
47 39
UT 17.6 [5.4] 660 [300] 1210186 tba
805 671 30.0
CT 17.7 [5.4] 660 [300] 1210277 tba
UT 17.6 [5.4] 660 [300] 1210194 tba
975 812 25.0
CT 17.7 [5.4] 660 [300] 2003452 tba
† to be assigned
Return to Motors
456 Dominator Motors
Return to Motors
456 Dominator* Motors—RX Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 13.8 [4.2] 632 [286.9] 2004090 2004276
968 807 55.5
UT 13.8 [4.2] 632 [286.9] 2004571 2004668
S 13.8 [4.2] 632 [286.9] 2004091 2004279
1,252 1,043 43.0
UT 13.8 [4.2] 632 [286.9] 2004574 2004671
84 70
S 13.8 [4.2] 632 [286.9] 2000864 2004277
1,394 1,162 38.5
UT 13.8 [4.2] 632 [286.9] 2004572 2004669
S 13.8 [4.2] 632 [286.9] 2000865 2004278
2,102 1,752 25.5
UT 13.8 [4.2] 632 [286.9] 2004573 2004670
S 15.4 [4.7] 705 [320.1] 2004092 2004280
945 788 65.0
UT 15.4 [4.7] 705 [320.1] 2004575 2004672
S 15.4 [4.7] 705 [320.1] 2000866 2004281
96 1,430 80 1,192 43.0
UT 15.4 [4.7] 705 [320.1] 2004576 2004673
S 15.4 [4.7] 705 [320.1] 2000867 2004282
2,402 2,002 25.5
UT 15.4 [4.7] 705 [320.1] 2004577 2004674
S 17.0 [5.2] 779 [353.7] 2000868 2004283
881 734 78.5 UT 17.0 [5.2] 779 [353.7] 2000822 2004675
LT 17.0 [5.2] 779 [353.7] 2000829 2004793
S 17.0 [5.2] 779 [353.7] 2000869 2004284
108 90
1,427 1,189 48.5 UT 17.0 [5.2] 779 [353.7] 2004578 2004676
LT 17.0 [5.2] 779 [353.7] 2000830 2004794
S 17.0 [5.2] 779 [353.7] 2000870 2004285
2,520 2,100 27.5
UT 17.0 [5.2] 779 [353.7] 2004579 2004677
S 18.6 [5.7] 852 [386.8] 2000871 2004286
1,181 984 65.0 UT 18.6 [5.7] 852 [386.8] 2000823 2004678
LT 18.6 [5.7] 852 [386.8] 2000831 2004795
S 18.6 [5.7] 852 [386.8] 2004093 2004287
1,586 1,322 48.5 UT 18.6 [5.7] 852 [386.8] 2000824 2004679
120 100 LT 18.6 [5.7] 852 [386.8] 2000832 2004796
S 18.6 [5.7] 852 [386.8] 2004094 2004289
2,194 1,828 35.0 UT 18.6 [5.7] 852 [386.8] 2004581 2004681
LT 18.6 [5.7] 852 [386.8] 2004767 2004797
S 18.6 [5.7] 852 [386.8] 2000872 2004288
2,598 2,165 29.5
UT 18.6 [5.7] 852 [386.8] 2004580 2004680
S 20.2 [6.2] 925 [420.0] 2004095 2004290
1,076 897 78.5 UT 20.2 [6.2] 925 [420.0] 2003181 2004682
LT 20.2 [6.2] 925 [420.0] 2003524 2004798
S 20.2 [6.2] 925 [420.0] 2004096 2004291
1,299 1,083 65.0 UT 20.2 [6.2] 925 [420.0] 2004582 2004683
132 110 LT 20.2 [6.2] 925 [420.0] 2004768 2004799
S 20.2 [6.2] 925 [420.0] 2004097 2004293
2,413 2,011 35.0
UT 20.2 [6.2] 925 [420.0] 2004584 2004685
S 20.2 [6.2] 925 [420.0] 2000873 2004292
2,635 2,196 32.0
UT 20.2 [6.2] 925 [420.0] 2004583 2004684
Return to Motors
456 Dominator* Motors—RX Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 21.8 [6.6] 998 [453.1] 2004098 2004294
931 776 99.0 UT 21.8 [6.6] 998 [453.1] 2004585 2004686
LT 21.8 [6.6] 998 [453.1] 2004769 2004800
S 21.8 [6.6] 998 [453.1] 2004099 2004295
1,174 978 78.5 UT 21.8 [6.6] 998 [453.1] 2000825 2004687
LT 21.8 [6.6] 998 [453.1] 2000833 2004801
144 120 S 21.8 [6.6] 998 [453.1] 2004100 2004297
2,145 1,788 43.0 UT 21.8 [6.6] 998 [453.1] 2004587 2004689
LT 21.8 [6.6] 998 [453.1] 2004770 2004802
S 21.8 [6.6] 998 [453.1] 2004101 2004298
2,389 1,991 38.5
UT 21.8 [6.6] 998 [453.1] 2004588 2004690
S 21.8 [6.6] 998 [453.1] 2000874 2004296
2,631 2,193 35.0
UT 21.8 [6.6] 998 [453.1] 2004586 2004688
S 23.4 [7.1] 1,072 [486.7] 2000875 2004299
1,272 1,060 78.5 UT 23.4 [7.1] 1,072 [486.7] 2004589 2004691
LT 23.4 [7.1] 1,072 [486.7] 2004771 2004803
S 23.4 [7.1] 1,072 [486.7] 2004103 2004300
156 130
1,535 1,279 65.0 UT 23.4 [7.1] 1,072 [486.7] 2000826 2004692
LT 23.4 [7.1] 1,072 [486.7] 2000834 2004804
S 23.4 [7.1] 1,072 [486.7] 2000876 2004301
2,588 2,157 38.5
UT 23.4 [7.1] 1,072 [486.7] 2004590 2004693
S 25.0 [7.6] 1,145 [519.8] 2004104 2004302
1,086 905 99.0 UT 25.0 [7.6] 1,145 [519.8] 2000827 2004694
168 140 LT 25.0 [7.6] 1,145 [519.8] 2000835 2004805
S 25.0 [7.6] 1,145 [519.8] 2004105 2004303
2,503 2,086 43.0
UT 25.0 [7.6] 1,145 [519.8] 2004591 2004695
S 26.6 [8.1] 1,218 [553.0] 2004106 2004304
180 2,682 150 2,235 43.0
UT 26.6 [8.1] 1,218 [553.0] 2004592 2004696
S 28.2 [8.6] 1,292 [586.6] 2003684 2004305
1,890 1,575 65.0 UT 28.2 [8.6] 1,292 [586.6] 2003685 2004697
192 160 LT 28.2 [8.6] 1,292 [586.6] 2003686 2004806
S 28.2 [8.6] 1,292 [586.6] 2003687 2004306
2,537 2,114 48.5
UT 28.2 [8.6] 1,292 [586.6] 2004593 2004698
S 29.9 [9.1] 1,369 [621.5] 2004108 2004308
2,008 1,673 65.0
UT 29.9 [9.1] 1,369 [621.5] 2004595 2004700
204 170 S 29.9 [9.1] 1,369 [621.5] 2004107 2004307
2,695 2,246 48.5 UT 29.9 [9.1] 1,369 [621.5] 2004594 2004699
LT 29.9 [9.1] 1,369 [621.5] 2004772 2004807
Return to Motors
456 Dominator* Motors—RX Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 31.5 [9.6] 1,443 [655.1] 2000877 2004309
1,397 1,164 99.0 UT 31.5 [9.6] 1,443 [655.1] 2000828 2004701
LT 31.5 [9.6] 1,443 [655.1] 2000836 2004808
S 31.5 [9.6] 1,443 [655.1] 2003691 2004312
1,762 1,468 78.5 UT 31.5 [9.6] 1,443 [655.1] 2003692 2004704
216 180 LT 31.5 [9.6] 1,443 [655.1] 2003693 2004810
S 31.5 [9.6] 1,443 [655.1] 2003688 2004311
2,125 1,771 65.0 UT 31.5 [9.6] 1,443 [655.1] 2003689 2004703
LT 31.5 [9.6] 1,443 [655.1] 2003690 2004809
S 31.5 [9.6] 1,443 [655.1] 2004109 2004310
2,490 2,075 55.5
UT 31.5 [9.6] 1,443 [655.1] 2004596 2004702
Return to Motors
456 Dominator Motors
Return to Motors
456 Dominator* Motors—RK Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
1,086 905 99.0 UT 25.0 [7.6] 1,145 [519.8] 100037553 100041727
168 140
2,503 2,086 43.0 UT 25.0 [7.6] 1,145 [519.8] 100037593 100042209
180 2,682 150 2,235 43.0 UT 26.6 [8.1] 1,218 [553.0] 100037607 100042210
1,890 1,575 65.0 UT 28.2 [8.6] 1,292 [586.6] 100037611 100042213
192 160
2,537 2,114 48.5 UT 28.2 [8.6] 1,292 [586.6] 100037616 100042215
2,008 1,673 65.0 UT 29.9 [9.1] 1,369 [621.5] 100037628 100042225
204 170
2,695 2,246 48.5 UT 29.9 [9.1] 1,369 [621.5] 100037626 100042217
1,397 1,164 99.0 UT 31.5 [9.6] 1,443 [655.1] 100037630 100042228
1,762 1,468 78.5 UT 31.5 [9.6] 1,443 [655.1] 100037642 100042232
216 180
2,125 1,771 65.0 UT 31.5 [9.6] 1,443 [655.1] 100037637 100042230
2,490 2,075 55.5 UT 31.5 [9.6] 1,443 [655.1] 100037633 100042229
Return to Motors
456 Dominator Motors
Return to Motors
456 Dominator* Motors—RX Type with Integral Phoenix* Sensor Adapter (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 22.1 [6.7] 1,023 [464.4] 100010826 100012720
931 776 99.2
LT 22.1 [6.7] 1,018 [462.2] 100018423 100018831
S 22.1 [6.7] 1,023 [464.4] 100010828 100012728
1,174 978 78.7
LT 22.1 [6.7] 1,018 [462.2] 100018428 100018853
144 120
S 22.1 [6.7] 1,023 [464.4] 100010836 100012730
2,145 1,788 43.1
LT 22.1 [6.7] 1,018 [462.2] 100018433 100018857
2,389 1,991 38.7 S 22.1 [6.7] 1,023 [464.4] 100010838 100012733
2,631 2,193 35.1 S 22.1 [6.7] 1,023 [464.4] 100010834 100012729
S 23.7 [7.2] 1,101 [499.9] 100010843 100012736
1,272 1,060 78.7
LT 23.6 [7.2] 1,092 [495.8] 2013326 100018866
156 130 S 23.7 [7.2] 1,101 [499.9} 100010851 100012739
1,535 1,279 65.2
LT 23.6 [7.2] 1,092 [495.8] 100018445 100018869
2,588 2,157 38.7 S 23.7 [7.2] 1,101 [499.9] 100010883 100012742
S 25.3 [7.2] 1,174 [533.0] 100010914 100012743
1,086 905 99.3
168 140 LT 25.2 [7.7] 1,165 [528.9] 2013327 100018877
2,503 2,086 43.1 S 25.3 [7.7] 1,174 [533.0] 2013334 100012745
180 2,682 150 2,235 43.1 S 26.9 [8.2] 1,247 [566.1] 2013335 100012751
S 28.5 [8.7] 1,321 [599.7] 100010917 100012755
1,890 1,575 65.2
192 160 LT 28.4 [8.7] 1,316 [597.5] 2013328 100018879
2,537 2,114 48.6 S 28.5 [8.7] 1,321 [599.7] 2013336 100012774
S 30.1 [9.2] 1,394 [632.9] 100010973 100012777
2,008 1,673 65.2
204 170 LT 30.1 [9.2] 1,390 [631.1] 100018447 100018880
2,695 2,246 48.6 S 30.1 [9.2] 1,394 [632.9] 100010966 100012776
S 31.6 [9.6] 1,463 [664.2] 100010975 100012779
1,397 1,164 99.2
LT 31.6 [9.6] 1,468 [666.5] 100018450 100018881
S 31.7 [9.7] 1,468 [666.5] 100010988 100012784
1,762 1,468 78.7
216 180 LT 31.6 [9.6] 1,463 [664.2] 2013329 100018887
S 31.7 [9.7] 1,468 [666.5] 2013337 100018884
2,125 1,771 65.2
LT 31.6 [9.6] 1,463 [664.2] 100018451 100012783
2,490 2,075 55.7 S 31.7 [9.7] 1,468 [666.5] 100010982 100012781
Return to Motors
456 Dominator Motors
Return to Motors
456 Dominator* Motors—RK Type with Integral Phoenix* Sensor Adapter (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 22.1 [6.7] 1,023 [464.4] 100029538 100032858
931 776 99.2
LT 22.1 [6.7] 1,018 [462.2] 100019760 100022162
S 22.1 [6.7] 1,023 [464.4] 100029540 100032859
1,174 978 78.7
LT 22.1 [6.7] 1,018 [462.2] 100019762 100022164
144 120
S 22.1 [6.7] 1,023 [464.4] 100031565 100032864
2,145 1,788 43.1
LT 22.1 [6.7] 1,018 [462.2] 100019764 100022167
2,389 1,991 38.7 S 22.1 [6.7] 1,023 [464.4] 100031569 100032872
2,631 2,193 35.1 S 22.1 [6.7] 1,023 [464.4] 100029542 100032862
S 23.7 [7.2] 1,101 [499.9] 100031573 100032874
1,272 1,060 78.7
LT 23.6 [7.2] 1,092 [495.8] 100019765 100022169
156 130 S 23.7 [7.2] 1,101 [499.9] 100031583 100032878
1,535 1,279 65.2
LT 23.6 [7.2] 1,092 [495.8] 100019767 100022170
2,588 2,157 38.7 S 23.7 [7.2] 1,101 [499.9] 100031589 100032879
S 25.3 [7.7] 1,174 [533.0] 100031597 100032881
1,086 905 99.3
168 140 LT 25.2 [7.7] 1,165 [528.9] 100019768 100022171
2,503 2,086 43.1 S 25.3 [7.7] 1,174 [533.0] 100031600 100032884
180 2,682 150 2,235 43.1 S 26.9 [8.2] 1,247 [566.1] 100031604 100032886
S 28.5 [8.7] 1,321 [599.7] 100031609 100032889
1,890 1,575 65.2
192 160 LT 28.4 [8.7] 1,316 [597.5] 100019769 100022172
2,537 2,114 48.6 S 28.5 [8.7] 1,321 [599.7] 100031614 100032891
S 30.1 [9.2] 1,394 [632.9] 100031618 100032894
2,008 1,673 65.2
204 170 LT 30.1 [9.2] 1,390 [632.9] 100019771 100022174
2,695 2,246 48.6 S 30.1 [9.2] 1,394 [632.9] 100031617 100032893
S 31.7 [9.7] 1,468 [666.5] 100031657 100032895
1,397 1,164 99.2
LT 31.6 [9.6] 1,463 [664.2] 100019772 100022176
S 31.7 [9.7] 1,468 [666.5] 100031680 100032902
1,762 1,468 78.7
216 180 LT 31.6 [9.6] 1463 [664.2] 100019775 100022179
S 31.7 [9.7] 1,468 [666.5] 100031674 100032900
2,125 1,771 65.2
LT 31.6 [9.6] 1,463 [664.2] 100019774 100022178
2,490 2,075 55.7 S 31.7 [9.7] 1,468 [666.5] 100031662 100032898
Return to Motors
540 Series Motors
Return to Motors
540 Series Motors—DK Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 13.0 [4.0] 2011949 tba†
844 703 74.5 808 [366.8]
UT 13.1 [4.0] tba tba
S 13.0 [4.0] tba tba
1,018 848 61.8 808 [366.8]
UT 13.1 [4.0] 2011745 tba
100 83
S 13.0 [4.0] 2011950 tba
1,368 1,140 46.0 808 [366.8]
UT 13.1 [4.0] tba 2011713
S 13.0 [4.0] 2011710 2011723
2,590 2,157 24.3 808 [366.8]
UT 13.1 [4.0] 2011746 tba
S 15.7 [4.8] 2011951 tba
1,491 1,242 52.7 976 [443.1]
UT 15.8 [4.8] 2011934 tba
S 15.7 [4.8] tba tba
125 1,710 104 1,424 46.0 976 [443.1]
UT 15.8 [4.8] tba 2011921
S 15.7 [4.8] 2011711 tba
2,583 2,152 30.4 976 [443.1]
UT 15.8 [4.8] 2011747 2011923
S 19.4 [5.9] tba tba
1,004 836 93.9 UT 18.7 [5.7] 1,169 [530.7] 2011748 tba
CT 18.9 [5.8] tba tba
S 19.4 [5.9] tba tba
150 1,266 125 1,055 74.5 UT 18.7 [5.7] 1,169 [530.7] 2011749 2011714
CT 18.9 [5.8] 2011831 2011827
S 19.4 [5.9] 2012047 1060409
2,575 2,145 36.6 UT 18.7 [5.7] 1,194 [542.1] 2011751 2011916
CT 18.9 [5.8] 2011887 tba
S 20.0 [6.1] tba tba
163 2,790 135 2,324 36.6 1,243 [564.3]
UT 20.0 [6.1] tba 2011890
S 22.2 [6.8] tba tba
1,171 975 94.0 UT 21.2 [6.5] 1,336 [606.5] tba tba
CT 21.5 [6.6] 2011888 tba
S 22.2 [6.8] tba tba
175 146
1,477 1,230 74.5 UT 21.2 [6.5] 1,336 [606.5] 2011752 2011715
CT 21.5 [6.6] 2011832 2011823
S 22.2 [6.8] 2012048 2012045
2,393 1,993 46.0 1,380 [626.5]
UT 21.2 [6.5] 2011935 2011716
S 24.9 [7.6] tba tba
1,339 1,115 93.9 UT 24.1 [7.4] 1,492 [677.4] 2011753 2011718
200 167 CT 24.3 [7.4] 2011835 2011821
S 24.9 [7.6] 2012049 tba
2,386 1,998 52.7 1,498 [680.1]
UT 24.1 [7.4] 2011936 2011768
† to be assigned
Return to Motors
540 Series Motors—DK Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 27.6 [8.4] tba† tba
1,113 927 127.1 UT 26.7 [8.1] 1,672 [759.1] 2011937 tba
CT 27.1 [8.3] tba tba
S 27.6 [8.4] tba tba
1,506 1,254 93.9 UT 26.7 [8.1] 1,672 [759.1] 2011754 2011719
225 188
CT 27.0 [8.2] 2011837 2011820
S 27.6 [8.4] 2011981 tba
2,292 1,909 61.7 1,654 [750.9]
UT 26.7 [8.1] 2011926 tba
S 27.6 [8.4] 2012050 2012044
2,685 2,237 52.7 1,716 [779.1]
UT 26.7 [8.1] 2011755 2011720
S 30.4 [8.3] tba tba
1,237 1,030 127.1 UT 29.5 [9.0] 1,890 [858.1] 2011756 2011721
CT 29.7 [9.1] 2011889 2011773
S 30.4 [9.3] tba tba
250 1,673 208 1,394 94.0 UT 29.5 [9.0] 1,846 [838.1] 2011925 tba
CT 29.7 [9.1] 2011883 tba
S 30.4 [9.3] 2012055 2012046
2,547 2,122 61.7 UT 29.5 [9.0] 1,840 [835.4] 2011757 2011728
CT 29.7 [9.1] 2011884 tba
† to be assigned
Return to Motors
540 Series Motors
Return to Motors
540 Series Motors—DX Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 13.1 [4.0] tba† tba
844 703 74.5 808 [366.8]
UT 13.1 [4.0] tba tba
S 13.1 [4.0] tba tba
1,018 848 61.8 808 [366.8]
UT 13.1 [4.0] 100033717 tba
100 83
S 13.1 [4.0] tba tba
1,368 1,140 46.0 808 [366.8]
UT 13.1 [4.0] tba tba
S 13.1 [4.0] tba tba
2,590 2,157 24.3 808 [366.8]
UT 13.1 [4.0] tba tba
S 15.7 [4.8] tba tba
1,491 1,242 52.7 976 [443.1]
UT 15.8 [4.8] tba tba
S 15.7 [4.8] tba tba
125 1,710 104 1,424 46.0 976 [443.1]
UT 15.8 [4.8] tba tba
S 15.7 [4.8] tba tba
2,583 2,152 30.4 976 [443.1]
UT 15.8 [4.8] tba tba
S 19.4 [5.9] tba tba
1,004 836 93.9 UT 18.7 [5.7] 1,169 [530.7] 100033716 tba
CT 18.9 [5.8] tba tba
S 19.4 [5.9] tba tba
150 1,266 125 1,055 74.5 UT 18.7 [5.7] 1,169 [530.7] tba tba
CT 18.9 [5.8] tba tba
S 19.4 [5.9] 2012053 tba
2,575 2,145 36.6 UT 18.7 [5.7] 1,194 [542.1] 2011736 tba
CT 18.9 [5.8] tba tba
S 20.0 [6.1] tba tba
163 2,790 135 2,324 36.6 1,243 [564.3]
UT 20.0 [6.1] tba tba
S 22.2 [6.8] tba tba
1,171 975 94.0 UT 21.2 [6.5] 1,336 [606.5] tba tba
CT 21.5 [6.6] tba tba
S 22.2 [6.8] tba tba
175 146
1,477 1,230 74.5 UT 21.2 [6.5] 1,336 [606.5] tba 2011729
CT 21.5 [6.6] tba 2011767
S 22.2 [6.8] 2012054 tba
2,393 1,993 46.0 1,380 [626.5]
UT 21.2 [6.5] tba tba
S 24.9 [7.6] tba tba
1,339 1,115 93.9 UT 24.1 [7.4] 1,492 [677.4] tba 100033721
200 167 CT 24.3 [7.4] tba 100033722
S 24.9 [7.6] tba tba
2,386 1,998 52.7 1,498 [680.1]
UT 24.1 [7.4] tba tba
† to be assigned
Return to Motors
540 Series Motors—DX Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
S 27.6 [8.4] tba† tba
1,113 927 127.1 UT 26.7 [8.1] 1,672 [759.1] 2011737 tba
CT 27.1 [8.3] 2011829 tba
S 27.6 [8.4] tba tba
1,506 1,254 93.9 UT 26.7 [8.1] 1,672 [759.1] tba tba
225 188
CT 27.0 [8.2] tba tba
S 27.6 [8.4] tba tba
2,292 1,909 61.7 1,654 [750.9]
UT 26.7 [8.1] tba 2011730
S 27.6 [8.4] tba tba
2,685 2,237 52.7 1,716 [779.1]
UT 26.7 [8.1] 2011738 100033720
S 30.4 [9.3] tba tba
1,237 1,030 127.1 UT 29.5 [9.0] 1,890 [858.1] 2011739 tba
CT 29.7 [9.1] 2011830 tba
S 30.4 [9.3] tba tba
250 1,673 208 1,394 94.0 UT 29.5 [9.0] 1,846 [838.1] tba tba
CT 29.7 [9.1] tba tba
S 30.4 [9.3] tba tba
2,547 2,122 61.7 UT 29.5 [9.0] 1,840 [835.4] 100033715 100089108
CT 29.7 [9.1] tba tba
† to be assigned
Return to Motors
562 Dominator Motors
Return to Motors
562 Dominator* Motors—RK-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
412 343 132.0 UT 9.1 [2.8] 656 [297.8] 2008120 2008339
842 702 64.5 UT 9.1 [2.8] 656 [297.8] 2008121 2008340
950 792 57.0 UT 9.1 [2.8] 656 [297.8] 2008122 2008341
1,165 971 46.5 UT 9.1 [2.8] 656 [297.8] 2008123 2008342
1,273 1,061 42.5 UT 9.1 [2.8] 656 [297.8] 2008124 2008343
1,380 1,150 39.5 UT 9.1 [2.8] 656 [297.8] 2008125 2008344
1,488 1,240 36.5 UT 9.1 [2.8] 656 [297.8] 2008126 2008345
2,133 1,777 25.5 UT 9.1 [2.8] 656 [297.8] 2008127 1193218
90 75
412 343 132.0 S 10.0 [3.1] 724 [328.7] 2008807 2009015
842 702 64.5 S 10.0 [3.1] 724 [328.7] 2008808 2009016
950 792 57.0 S 10.0 [3.1] 724 [328.7] 2008809 2009017
1,165 971 46.5 S 10.0 [3.1] 724 [328.7] 2008810 2009018
1,273 1,061 42.5 S 10.0 [3.1] 724 [328.7] 2008811 2009019
1,380 1,150 39.5 S 10.0 [3.1] 724 [328.7] 2008812 2009020
1,488 1,240 36.5 S 10.0 [3.1] 724 [328.7] 2008813 2009021
2,133 1,777 25.5 S 10.0 [3.1] 724 [328.7] 2008814 2009022
485 404 130.0 UT 10.3 [3.1] 743 [337.3] 2008128 2008347
865 721 73.0 UT 10.3 [3.1] 743 [337.3] 2008129 2008348
1,118 932 56.5 UT 10.3 [3.1] 743 [337.3] 2008130 2008349
1,371 1,142 46.0 UT 10.3 [3.1] 743 [337.3] 2008131 2008350
105 88
485 404 130.0 S 11.2 [3.4] 812 [368.6] 2008815 2009023
865 721 73.0 S 11.2 [3.4] 812 [368.6] 2008816 2009024
1,118 932 56.5 S 11.2 [3.4] 812 [368.6] 2008817 2009025
1,371 1,142 46.0 S 11.2 [3.4] 812 [368.6] 2008818 2009026
837 697 86.5 UT 11.2 [3.4] 807 [366.4] 2008132 2008351
980 817 73.5 UT 11.2 [3.4] 807 [366.4] 2008133 2008352
1,267 1,056 57.0 UT 11.2 [3.4] 807 [366.4] 2008134 2008353
1,410 1,175 51.0 UT 11.2 [3.4] 807 [366.4] 2008135 2008354
2,270 1,892 32.0 UT 11.2 [3.4] 807 [366.4] 2008136 2008355
2,558 2,132 28.0 UT 11.2 [3.4] 807 [366.4] 2008137 2008356
4,279 3,566 17.0 UT 11.2 [3.4] 807 [366.4] 2008138 2008357
120 100
837 697 86.5 S 12.1 [3.7] 876 [397.7] 2008819 2009028
980 817 73.5 S 12.1 [3.7] 876 [397.7] 2008820 2009029
1,267 1,056 57.0 S 12.1 [3.7] 876 [397.7] 2008821 2009030
1,410 1,175 51.0 S 12.1 [3.7] 876 [397.7] 2008822 2009031
2,270 1,892 32.0 S 12.1 [3.7] 876 [397.7] 2008823 2009032
2,558 2,132 28.0 S 12.1 [3.7] 876 [397.7] 2008824 2009033
4,279 3,566 17.0 S 12.1 [3.7] 876 [397.7] 2008825 2009034
948 790 85.5 UT 12.4 [3.8] 895 [406.3] 2008139 2008358
1,110 925 73.0 UT 12.4 [3.8] 895 [406.3] 2008140 2008359
1,435 1,196 56.5 UT 12.4 [3.8] 895 [406.3] 2008141 2008360
1,760 1,467 46.0 UT 12.4 [3.8] 895 [406.3] 2008142 2008361
135 113
948 790 85.5 S 13.3 [4.1] 963 [437.2] 2008826 2009035
1,110 925 73.0 S 13.3 [4.1] 963 [437.2] 2008827 2009036
1,435 1,196 56.5 S 13.3 [4.1] 963 [437.2] 2008828 2009037
1,760 1,467 46.0 S 13.3 [4.1] 963 [437.2] 2008829 2009038
Return to Motors
562 Dominator* Motors—RK-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
867 722 104.0 UT 13.2 [4.0] 959 [435.4] 2008143 2008362
1,225 1,021 73.5 UT 13.2 [4.0] 959 [435.4] 2008144 2008363
1,404 1,170 64.5 UT 13.2 [4.0] 959 [435.4] 2008145 2008364
2,300 1,917 39.5 UT 13.2 [4.0] 959 [435.4] 2008146 2008365
2,659 2,216 34.0 UT 13.2 [4.0] 959 [435.4] 2008147 2008366
3,197 2,264 28.0 UT 13.2 [4.0] 959 [435.4] 2008148 2008367
4,273 3,561 21.0 UT 13.2 [4.0] 959 [435.4] 2008149 2008368
150 125
867 722 104.0 S 14.2 [4.3] 1,027 [466.3] 2008830 2009039
1,225 1,021 73.5 S 14.2 [4.3] 1,027 [466.3] 2008831 2009040
1,404 1,170 64.5 S 14.2 [4.3] 1,027 [466.3] 2008832 2009041
2,300 1,917 39.5 S 14.2 [4.3] 1,027 [466.3] 2008833 2009042
2,659 2,216 34.0 S 14.2 [4.3] 1,027 [466.3] 2008834 2009043
3,197 2,264 28.0 S 14.2 [4.3] 1,027 [466.3] 2008835 2009044
4,273 3,561 21.0 S 14.2 [4.3] 1,027 [466.3] 2008836 2009045
1,355 1,129 73.5 UT 14.5 [4.4] 1,046 [474.9] 2008150 2008369
1,752 1,460 56.5 UT 14.5 [4.4] 1,046 [474.9] 2008151 2008370
2,148 1,790 46.0 UT 14.5 [4.4] 1,046 [474.9] 2008152 2008371
165 138
1,355 1,129 73.5 S 15.4 [4.7] 1,115 [506.2] 2008837 2009046
1,752 1,460 56.5 S 15.4 [4.7] 1,115 [506.2] 2008838 2009047
2,148 1,790 46.0 S 15.4 [4.7] 1,115 [506.2] 2008839 2009048
1,040 867 104.0 UT 15.3 [4.7] 1,110 [503.9] 2008153 2008372
1,255 1,046 86.5 UT 15.3 [4.7] 1,110 [503.9] 2008154 2008373
1,685 1,404 64.5 UT 15.3 [4.7] 1,110 [503.9] 2008155 2008374
1,900 1,583 57.0 UT 15.3 [4.7] 1,110 [503.9] 2008156 2008375
2,115 1,762 51.0 UT 15.3 [4.7] 1,110 [503.9] 2008157 2008376
2,545 2,121 42.5 UT 15.3 [4.7] 1,110 [503.9] 2008158 2008377
3,190 2,658 34.0 UT 15.3 [4.7] 1,110 [503.9] 2008159 2008378
4,051 3,376 26.5 UT 15.3 [4.7] 1,110 [503.9] 2008160 2008379
180 150
1,040 867 104.0 S 16.3 [5.0] 1,179 [535.3] 2008840 2009049
1,255 1,046 86.5 S 16.3 [5.0] 1,179 [535.3] 2008841 2009050
1,685 1,404 64.5 S 16.3 [5.0] 1,179 [535.3] 2008842 2009051
1,900 1,583 57.0 S 16.3 [5.0] 1,179 [535.3] 2008843 2009052
2,115 1,762 51.0 S 16.3 [5.0] 1,179 [535.3] 2008844 2009053
2,545 2,121 42.5 S 16.3 [5.0] 1,179 [535.3] 2008845 2009054
3,190 2,658 34.0 S 16.3 [5.0] 1,179 [535.3] 2008846 2009055
4,051 3,376 26.5 S 16.3 [5.0] 1,179 [535.3] 2008847 2009056
Return to Motors
562 Dominator* Motors—RK-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
1,213 1,011 104.0 UT 17.4 [5.3] 1,262 [572.9] 2008161 2008380
2,468 2,057 51.0 UT 17.4 [5.3] 1,262 [572.9] 2008162 2008381
3,722 3,102 34.0 UT 17.4 [5.3] 1,262 [572.9] 2008163 2008382
210 175
1,213 1,011 104.0 S 18.4 [5.6] 1,331 [604.3] 2008848 2009057
2,468 2,057 51.0 S 18.4 [5.6] 1,331 [604.3] 2008849 2009058
3,722 3,102 34.0 S 18.4 [5.6] 1,331 [604.3] 2008850 2009059
1,100 917 131.0 UT 19.5 [5.9] 1,414 [642.0] 2008164 2008383
1,386 1,155 104.0 UT 19.5 [5.9] 1,414 [642.0] 2008165 2008384
2,247 1,872 64.5 UT 19.5 [5.9] 1,414 [642.0] 2008168 2008385
2,534 2,112 57.0 UT 19.5 [5.9] 1,414 [642.0] 2008169 2008386
4,255 3,546 34.0 UT 19.5 [5.9] 1,414 [642.0] 2008170 2008387
1,100 917 131.0 CT 19.7 [6.0] 1,423 [646.0] 2009704 2009728
240 200
1,386 1,155 104.0 CT 19.7 [6.0] 1,423 [646.0] 2009705 2009729
1,100 917 131.0 S 20.5 [6.3] 1,482 [672.8] 2008851 2009060
1,386 1,155 104.0 S 20.5 [6.3] 1,482 [672.8] 2008852 2009061
2,247 1,872 64.5 S 20.5 [6.3] 1,482 [672.8] 2008853 2009062
2,534 2,112 57.0 S 20.5 [6.3] 1,482 [672.8] 2008854 2009063
4,255 3,546 34.0 S 20.5 [6.3] 1,482 [672.8] 2008855 2009064
1,237 1,031 131.0 UT 21.6 [6.6] 1,565 [710.5] 2008171 2008388
1,560 1,300 104.0 UT 21.6 [6.6] 1,565 [710.5] 2008172 2008389
1,882 1,568 86.5 UT 21.6 [6.6] 1,565 [710.5] 2008173 2008390
2,205 1,837 73.5 UT 21.6 [6.6] 1,565 [710.5] 2008174 2008391
2,528 2,107 64.5 UT 21.6 [6.6] 1,565 [710.5] 2008175 2008392
1,237 1,031 131.0 CT 21.8 [6.6] 1,575 [715.1] 2009706 2009730
270 1,560 225 1,300 104.0 CT 21.8 [6.6] 1,575 [715.1] 2009707 2009731
1,882 1,568 86.5 CT 21.8 [6.6] 1,575 [715.1] 2009708 2009732
1,237 1,031 131.0 S 22.6 [6.9] 1,634 [741.8] 2008856 2009065
1,560 1,300 104.0 S 22.6 [6.9] 1,634 [741.8] 2008857 2009066
1,882 1,568 86.5 S 22.6 [6.9] 1,634 [741.8] 2008858 2009067
2,205 1,837 73.5 S 22.6 [6.9] 1,634 [741.8] 2008859 2009068
2,528 2,107 64.5 S 22.6 [6.9] 1,634 [741.8] 2008860 2009069
1,374 1,145 131.0 UT 23.7 [7.2] 1,717 [779.5] 2008176 2008488
1,733 1,444 104.0 UT 23.7 [7.2] 1,717 [779.5] 2008177 2008489
2,091 1,742 86.5 UT 23.7 [7.2] 1,717 [779.5] 2008178 2008490
2,450 2,042 73.5 UT 23.7 [7.2] 1,717 [779.5] 2008179 2008491
4,242 3,535 42.5 UT 23.7 [7.2] 1,717 [779.5] 2008180 2008492
1,374 1,145 131.0 CT 23.9 [7.3] 1,726 [783.6] 2009709 2009764
300 1,733 250 1,444 104.0 CT 23.9 [7.3] 1,726 [783.6] 2009710 2009765
2091 1,742 86.5 CT 23.9 [7.3] 1,726 [783.6] 2009711 2009766
1,374 1,145 131.0 S 24.7 [7.5] 1,785 [810.4] 2008861 2009070
1,733 1,444 104.0 S 24.7 [7.5] 1,785 [810.4] 2008862 2009071
2,091 1,742 86.5 S 24.7 [7.5] 1,785 [810.4] 2008863 2009072
2,450 2,042 73.5 S 24.7 [7.5] 1,785 [810.4] 2008864 2009073
4,242 3,535 42.5 S 24.7 [7.5] 1,785 [810.4] 2008865 2009074
Return to Motors
562 Dominator* Motors—RK-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
1,512 1,260 131.0 UT 25.8 [7.9] 1,868 [848.1] 2008181 2008493
1,906 1,588 104.0 UT 25.8 [7.9] 1,868 [848.1] 2008182 2008484
2,695 2,246 73.5 UT 25.8 [7.9] 1,868 [848.1] 2008183 2008495
3,484 2,903 57.0 UT 25.8 [7.9] 1,868 [848.1] 2008184 2008496
3,878 3,232 51.0 UT 25.8 [7.9] 1,868 [848.1] 2008185 2008497
1,512 1,260 131.0 CT 25.9 [7.9] 1,878 [852.6] 2009712 2009736
330 275
1,906 1,588 104.0 CT 25.9 [7.9] 1,878 [852.6] 2009713 2009737
1,512 1,260 131.0 S 26.8 [8.2] 1,937 [879.4] 2008866 2009075
1,906 1,588 104.0 S 26.8 [8.2] 1,937 [879.4] 2008867 2009076
2,695 2,246 73.5 S 26.8 [8.2] 1,937 [879.4] 2008868 2009077
3,484 2,903 57.0 S 26.8 [8.2] 1,937 [879.4] 2008869 2009078
3,878 3,232 51.0 S 26.8 [8.2] 1,937 [879.4] 2008870 2009079
1,649 1,374 131.0 UT 27.9 [8.5] 2,020 [917.1] 2008186 2008405
2,080 1,733 104.0 UT 27.9 [8.5] 2,020 [917.1] 2008187 2008406
2,510 2,092 86.5 UT 27.9 [8.5] 2,020 [917.1] 2008188 2008407
3,370 2,808 64.5 UT 27.9 [8.5] 2,020 [917.1] 2008189 2008408
4,230 3,525 51.0 UT 27.9 [8.5] 2,020 [917.1] 2008190 2008409
1,649 1,374 131.0 CT 28.0 [8.5] 2,030 [921.6] 2009726 2009738
360 300
2,080 1,733 104.0 CT 28.0 [8.5] 2,030 [921.6] 2009727 2009739
1,649 1,374 131.0 S 28.9 [8.8] 2,088 [948.0] 2008871 2009080
2,080 1,733 104.0 S 28.9 [8.8] 2,088 [948.0] 2008872 2009081
2,510 2,092 86.5 S 28.9 [8.8] 2,088 [948.0] 2008873 2009082
3,370 2,808 64.5 S 28.9 [8.8] 2,088 [948.0] 2008874 2009083
4,230 3,525 51.0 S 28.9 [8.8] 2,088 [948.0] 2008875 2009084
1,321 1,101 150.0 UT 30.1 [9.2] 2,171 [985.6] 2008472 2008503
1,787 1,489 131.0 UT 30.1 [9.2] 2,171 [985.6] 2008473 2008504
2,253 1,877 104.0 UT 30.1 [9.2] 2,171 [985.6] 2008193 2008412
2,718 2,265 86.5 UT 30.1 [9.2] 2,171 [985.6] 2008194 2008413
3,650 3,042 64.5 UT 30.1 [9.2] 2,171 [985.6] 2008195 2008414
1,321 1,101 150.0 CT 30.1 [9.2] 2,181 [990.2] 2009747 2009771
390 325
1,787 1,489 131.0 CT 30.1 [9.2] 2,181 [990.2] 2009748 2009772
1,321 1,101 150.0 S 30.9 [9.4] 2,240 [1,017.0] 2008876 2009085
1,787 1,489 131.0 S 30.9 [9.4] 2,240 [1,017.0] 2008877 2009086
2,253 1,877 104.0 S 30.9 [9.4] 2,240 [1,017.0] 2008878 2009087
2,718 2,265 86.5 S 30.9 [9.4] 2,240 [1,017.0] 2008879 2009088
3,650 3,042 64.5 S 30.9 [9.4] 2,240 [1,017.0] 2008880 2009089
1,924 1,603 131.0 UT 32.1 [9.8] 2,323 [1,054.6] 2008446 2008508
2,426 2,022 104.0 UT 32.1 [9.8] 2,323 [1,054.6] 2008197 2008416
2,928 2,440 86.5 UT 32.1 [9.8] 2,323 [1,054.6] 2008198 2008417
3,430 2,858 73.5 UT 32.1 [9.8] 2,323 [1,054.6] 2008199 2008418
3,932 3,277 64.5 UT 32.1 [9.8] 2,323 [1,054.6] 2008200 2008419
420 1,924 350 1,603 131.0 CT 32.2 [9.8] 2,333 [1,059.2] 2009749 2009773
1,924 1,603 131.0 S 33.0 [10.1] 2,391 [1,085.5] 2008881 2009090
2,426 2,022 104.0 S 33.0 [10.1] 2,391 [1,085.5] 2008883 2009091
2,928 2,440 86.5 S 33.0 [10.1] 2,391 [1,085.5] 2008885 2009092
3,430 2,858 73.5 S 33.0 [10.1] 2,391 [1,085.5] 2008886 2009093
3,932 3,277 64.5 S 33.0 [10.1] 2,391 [1,085.5] 2008887 2009094
Return to Motors
562 Dominator* Motors—RK-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
1,524 1,270 178.0 UT 34.2 [10.4] 2,474 [1,123.2] 2008451 2008513
2,062 1,718 131.0 UT 34.2 [10.4] 2,474 [1,123.2] 2008452 2008514
2,600 2,167 104.0 UT 34.2 [10.4] 2,474 [1,123.2] 2008203 2008422
3,137 2,614 86.5 UT 34.2 [10.4] 2,474 [1,123.2] 2008204 2008423
3,675 3,062 73.5 UT 34.2 [10.4] 2,474 [1,123.2] 2008205 2008424
4,213 3,511 64.5 UT 34.2 [10.4] 2,474 [1,123.2] 2008206 2008425
1,524 1,270 178.0 CT 34.3 [10.5] 2,484 [1,127.7] 2009750 2009774
450 375
2,062 1,718 131.0 CT 34.3 [10.5] 2,484 [1,127.7] 2009751 2009775
1,524 1,270 178.0 S 35.1 [10.7] 2,543 [1,154.5] 2008888 2009095
2,062 1,718 131.0 S 35.1 [10.7] 2,543 [1,154.5] 2008889 2009096
2,600 2,167 104.0 S 35.1 [10.7] 2,543 [1,154.5] 2008890 2009097
3,137 2,614 86.5 S 35.1 [10.7] 2,543 [1,154.5] 2008891 2009098
3,675 3,062 73.5 S 35.1 [10.7] 2,543 [1,154.5] 2008892 2009099
4,213 3,511 64.5 S 35.1 [10.7] 2,543 [1,154.5] 2008893 2009100
Return to Motors
562 Dominator Motors
Return to Motors
562 Dominator* Motors—RX-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
412 343 132.0 UT 9.1 [2.8] 656 [297.8] 2008535 2008697
842 702 64.5 UT 9.1 [2.8] 656 [297.8] 2008536 2008698
950 792 57.0 UT 9.1 [2.8] 656 [297.8] 2008537 2008699
1,165 971 46.5 UT 9.1 [2.8] 656 [297.8] 2008538 2008700
1,273 1,061 42.5 UT 9.1 [2.8] 656 [297.8] 2008539 2008701
1,380 1,150 39.5 UT 9.1 [2.8] 656 [297.8] 2008540 2008702
1,488 1,240 36.5 UT 9.1 [2.8] 656 [297.8] 2008541 2008703
2,133 1,777 25.5 UT 9.1 [2.8] 656 [297.8] 2008542 2008704
90 75
412 343 132.0 S 10.0 [3.1] 724 [328.7] 2009117 2009279
842 702 64.5 S 10.0 [3.1] 724 [328.7] 2009118 2009280
950 792 57.0 S 10.0 [3.1] 724 [328.7] 2009119 2009281
1,165 971 46.5 S 10.0 [3.1] 724 [328.7] 2009120 2009282
1,273 1,061 42.5 S 10.0 [3.1] 724 [328.7] 2009121 2009293
1,380 1,150 39.5 S 10.0 [3.1] 724 [328.7] 2009122 2009284
1,488 1,240 36.5 S 10.0 [3.1] 724 [328.7] 2009123 2009285
2,133 1,777 25.5 S 10.0 [3.1] 724 [328.7] 2009124 2009286
485 404 130.0 UT 10.3 [3.1] 743 [337.3] 2008543 2008705
865 721 73.0 UT 10.3 [3.1] 743 [337.3] 2008544 2008706
1,118 932 56.5 UT 10.3 [3.1] 743 [337.3] 2008545 2008707
1,371 1,142 46.0 UT 10.3 [3.1] 743 [337.3] 2008546 2008708
105 88
485 404 130.0 S 11.2 [3.4] 812 [368.6] 2009125 2009287
865 721 73.0 S 11.2 [3.4] 812 [368.6] 2009126 2009288
1,118 932 56.5 S 11.2 [3.4] 812 [368.6] 2009127 2009289
1,371 1,142 46.0 S 11.2 [3.4] 812 [368.6] 2009128 2009290
837 697 86.5 UT 11.2 [3.4] 807 [366.4] 2008547 2008709
980 817 73.5 UT 11.2 [3.4] 807 [366.4] 2008548 2008710
1,267 1,056 57.0 UT 11.2 [3.4] 807 [366.4] 2008549 2008711
1,410 1,175 51.0 UT 11.2 [3.4] 807 [366.4] 2008550 2008712
2,270 1,892 32.0 UT 11.2 [3.4] 807 [366.4] 2008551 2008713
2,558 2,132 28.0 UT 11.2 [3.4] 807 [366.4] 2008552 2008714
4,279 3,566 17.0 UT 11.2 [3.4] 807 [366.4] 2008553 2008715
120 100
837 697 86.5 S 12.1 [3.7] 876 [397.7] 2009129 2009291
980 817 73.5 S 12.1 [3.7] 876 [397.7] 2009130 2009292
1,267 1,056 57.0 S 12.1 [3.7] 876 [397.7] 2009131 2009293
1,410 1,175 51.0 S 12.1 [3.7] 876 [397.7] 2009132 2009294
2,270 1,892 32.0 S 12.1 [3.7] 876 [397.7] 2009133 2009295
2,558 2,132 28.0 S 12.1 [3.7] 876 [397.7] 2009134 2009296
4,279 3,566 17.0 S 12.1 [3.7] 876 [397.7] 2009135 2009297
948 790 85.5 UT 12.4 [3.8] 895 [406.3] 2008554 2008716
1,110 925 73.0 UT 12.4 [3.8] 895 [406.3] 2008555 2008717
1,435 1,196 56.5 UT 12.4 [3.8] 895 [406.3] 2008556 2008718
1,760 1,467 46.0 UT 12.4 [3.8] 895 [406.3] 2008557 2008719
135 113
948 790 85.5 S 13.3 [4.1] 963 [437.2] 2009136 2009298
1,110 925 73.0 S 13.3 [4.1] 963 [437.2] 2009137 2009299
1,435 1,196 56.5 S 13.3 [4.1] 963 [437.2] 2009138 2009300
1,760 1,467 46.0 S 13.3 [4.1] 963 [437.2] 2009139 2009301
Return to Motors
562 Dominator* Motors—RX-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
867 722 104.0 UT 13.2 [4.0] 959 [435.4] 2008558 2008720
1,225 1,021 73.5 UT 13.2 [4.0] 959 [435.4] 2008559 2008721
1,404 1,170 64.5 UT 13.2 [4.0] 959 [435.4] 2008560 2008722
2,300 1,917 39.5 UT 13.2 [4.0] 959 [435.4] 2008561 2008723
2,659 2,216 34.0 UT 13.2 [4.0] 959 [435.4] 2008562 2008724
3,197 2,264 28.0 UT 13.2 [4.0] 959 [435.4] 2008563 2008725
4,273 3,561 21.0 UT 13.2 [4.0] 959 [435.4] 2008564 2008726
150 125
867 722 104.0 S 14.2 [4.3] 1,027 [466.3] 2009140 2009302
1,225 1,021 73.5 S 14.2 [4.3] 1,027 [466.3] 2009141 2009303
1,404 1,170 64.5 S 14.2 [4.3] 1,027 [466.3] 2009142 2009304
2,300 1,917 39.5 S 14.2 [4.3] 1,027 [466.3] 2009143 2009305
2,659 2,216 34.0 S 14.2 [4.3] 1,027 [466.3] 2009144 2009306
3,197 2,264 28.0 S 14.2 [4.3] 1,027 [466.3] 2009145 2009307
4,273 3,561 21.0 S 14.2 [4.3] 1,027 [466.3] 2009146 2009308
1,355 1,129 73.5 UT 14.5 [4.4] 1,046 [474.9] 2008565 2008727
1,752 1,460 56.5 UT 14.5 [4.4] 1,046 [474.9] 2008566 2008728
2,148 1,790 46.0 UT 14.5 [4.4] 1,046 [474.9] 2008567 2008729
165 138
1,355 1,129 73.5 S 15.4 [4.7] 1,115 [506.2] 2009147 2009309
1,752 1,460 56.5 S 15.4 [4.7] 1,115 [506.2] 2009148 2009310
2,148 1,790 46.0 S 15.4 [4.7] 1,115 [506.2] 2009149 2009311
1,040 867 104.0 UT 15.3 [4.7] 1,110 [503.9] 2008570 2008730
1,255 1,046 86.5 UT 15.3 [4.7] 1,110 [503.9] 2008571 2008731
1,685 1,404 64.5 UT 15.3 [4.7] 1,110 [503.9] 2008572 2008732
1,900 1,583 57.0 UT 15.3 [4.7] 1,110 [503.9] 2008573 2008733
2,115 1,762 51.0 UT 15.3 [4.7] 1,110 [503.9] 2008574 2008734
2,545 2,121 42.5 UT 15.3 [4.7] 1,110 [503.9] 2008575 2008735
3,190 2,658 34.0 UT 15.3 [4.7] 1,110 [503.9] 2008576 2008736
4,051 3,376 26.5 UT 15.3 [4.7] 1,110 [503.9] 2008577 2008737
180 150
1,040 867 104.0 S 16.3 [5.0] 1,179 [535.3] 2009150 2009312
1,255 1,046 86.5 S 16.3 [5.0] 1,179 [535.3] 2009151 2009313
1,685 1,404 64.5 S 16.3 [5.0] 1,179 [535.3] 2009152 2009314
1,900 1,583 57.0 S 16.3 [5.0] 1,179 [535.3] 2009153 2009315
2,115 1,762 51.0 S 16.3 [5.0] 1,179 [535.3] 2009154 2009316
2,545 2,121 42.5 S 16.3 [5.0] 1,179 [535.3] 2009155 2009317
3,190 2,658 34.0 S 16.3 [5.0] 1,179 [535.3] 2009156 2009318
4,051 3,376 26.5 S 16.3 [5.0] 1,179 [535.3] 2009157 2009319
1,213 1,011 104.0 UT 17.4 [5.3] 1,262 [572.9] 2008161 2008380
2,468 2,057 51.0 UT 17.4 [5.3] 1,262 [572.9] 2008162 2008381
3,722 3,102 34.0 UT 17.4 [5.3] 1,262 [572.9] 2008163 2008382
210 175
1,213 1,011 104.0 S 18.4 [5.6] 1,331 [604.3] 2008848 2009057
2,468 2,057 51.0 S 18.4 [5.6] 1,331 [604.3] 2008849 2009058
3,722 3,102 34.0 S 18.4 [5.6] 1,331 [604.3] 2008850 2009059
Return to Motors
562 Dominator* Motors—RX-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
1,100 917 131.0 UT 19.5 [5.9] 1,414 [642.0] 2008581 2008741
1,386 1,155 104.0 UT 19.5 [5.9] 1,414 [642.0] 2008582 2008742
2,247 1,872 64.5 UT 19.5 [5.9] 1,414 [642.0] 2008583 2008744
2,534 2,112 57.0 UT 19.5 [5.9] 1,414 [642.0] 2008584 2008745
4,255 3,546 34.0 UT 19.5 [5.9] 1,414 [642.0] 2008585 tba†
1,100 917 131.0 CT 19.7 [6.0] 1,423 [646.0] 2009776 2009795
240 200
1,386 1,155 104.0 CT 19.7 [6.0] 1,423 [646.0] 2009777 2009796
1,100 917 131.0 S 20.5 [6.3] 1,482 [672.8] 2009161 2009323
1,386 1,155 104.0 S 20.5 [6.3] 1,482 [672.8] 2009162 2009324
2,247 1,872 64.5 S 20.5 [6.3] 1,482 [672.8] 2009163 2009325
2,534 2,112 57.0 S 20.5 [6.3] 1,482 [672.8] 2009164 2009326
4,255 3,546 34.0 S 20.5 [6.3] 1,482 [672.8] 2009165 2009327
1,237 1,031 131.0 UT 21.6 [6.6] 1,565 [710.5] 2008586 2008746
1,560 1,300 104.0 UT 21.6 [6.6] 1,565 [710.5] 2008587 2008747
1,882 1,568 86.5 UT 21.6 [6.6] 1,565 [710.5] 2008588 2008748
2,205 1,837 73.5 UT 21.6 [6.6] 1,565 [710.5] 2008589 2008749
2,528 2,107 64.5 UT 21.6 [6.6] 1,565 [710.5] 2008590 2008750
1,237 1,031 131.0 CT 21.8 [6.6] 1,575 [715.1] 2009778 2009797
270 1,560 225 1,300 104.0 CT 21.8 [6.6] 1,575 [715.1] 2009779 2009798
1,882 1,568 86.5 CT 21.8 [6.6] 1,575 [715.1] 2009835 2009799
1,237 1,031 131.0 S 22.6 [6.9] 1,634 [741.8] 2009166 2009328
1,560 1,300 104.0 S 22.6 [6.9] 1,634 [741.8] 2009167 2009329
1,882 1,568 86.5 S 22.6 [6.9] 1,634 [741.8] 2009168 2009330
2,205 1,837 73.5 S 22.6 [6.9] 1,634 [741.8] 2009169 2009331
2,528 2,107 64.5 S 22.6 [6.9] 1,634 [741.8] 2009170 2009332
1,374 1,145 131.0 UT 23.7 [7.2] 1,717 [779.5] 2008591 2008751
1,733 1,444 104.0 UT 23.7 [7.2] 1,717 [779.5] 2008592 2008752
2,091 1,742 86.5 UT 23.7 [7.2] 1,717 [779.5] 2008593 2008753
2,450 2,042 73.5 UT 23.7 [7.2] 1,717 [779.5] 2008594 2008754
4,242 3,535 42.5 UT 23.7 [7.2] 1,717 [779.5] 2008595 2008755
1,374 1,145 131.0 CT 23.9 [7.3] 1,726 [783.6] 2009780 2009800
300 1,733 250 1,444 104.0 CT 23.9 [7.3] 1,726 [783.6] 2009781 2009801
2,091 1,742 86.5 CT 23.9 [7.3] 1,726 [783.6] 2009782 2009802
1,374 1,145 131.0 S 24.7 [7.5] 1,785 [810.4] 2009171 2009333
1,733 1,444 104.0 S 24.7 [7.5] 1,785 [810.4] 2009172 2009334
2,091 1,742 86.5 S 24.7 [7.5] 1,785 [810.4] 2009173 2009335
2,450 2,042 73.5 S 24.7 [7.5] 1,785 [810.4] 2009174 2009336
4,242 3,535 42.5 S 24.7 [7.5] 1,785 [810.4] 2009175 2009337
† to be assigned
Return to Motors
562 Dominator* Motors—RX-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
1,512 1,260 131.0 UT 25.8 [7.9] 1,868 [848.1] 2008596 2008756
1,906 1,588 104.0 UT 25.8 [7.9] 1,868 [848.1] 2008597 2008757
2,695 2,246 73.5 UT 25.8 [7.9] 1,868 [848.1] 2008598 2008758
3,484 2,903 57.0 UT 25.8 [7.9] 1,868 [848.1] 2008599 2008759
3,878 3,232 51.0 UT 25.8 [7.9] 1,868 [848.1] 2008600 2008760
1,512 1,260 131.0 CT 25.9 [7.9] 1,878 [852.6] 2009783 2009803
330 275
1,906 1,588 104.0 CT 25.9 [7.9] 1,878 [852.6] 2009784 2009804
1,512 1,260 131.0 S 26.8 [8.2] 1,937 [879.4] 2009176 2009338
1,906 1,588 104.0 S 26.8 [8.2] 1,937 [879.4] 2009178 2009339
2,695 2,246 73.5 S 26.8 [8.2] 1,937 [879.4] 2009179 2009340
3,484 2,903 57.0 S 26.8 [8.2] 1,937 [879.4] 2009180 2009341
3,878 3,232 51.0 S 26.8 [8.2] 1,937 [879.4] 2009181 2009342
1,649 1,374 131.0 UT 27.9 [8.5] 2,020 [917.1] 2011002 2011022
2,080 1,733 104.0 UT 27.9 [8.5] 2,020 [917.1] 2011003 2011023
2,510 2,092 86.5 UT 27.9 [8.5] 2,020 [917.1] 2011004 2011024
3,370 2,808 64.5 UT 27.9 [8.5] 2,020 [917.1] 2011005 2011025
4,230 3,525 51.0 UT 27.9 [8.5] 2,020 [917.1] 2011006 2011026
1,649 1,374 131.0 CT 28.0 [8.5] 2,030 [921.6] 2011146 2011150
360 300
2,080 1,733 104.0 CT 28.0 [8.5] 2,030 [921.6] 2011147 2011151
1,649 1,374 131.0 S 28.9 [8.8] 2,088 [948.0] 2010920 2010962
2,080 1,733 104.0 S 28.9 [8.8] 2,088 [948.0] 2010921 2010963
2,510 2,092 86.5 S 28.9 [8.8] 2,088 [948.0] 2010922 2010964
3,370 2,808 64.5 S 28.9 [8.8] 2,088 [948.0] 2010923 2010965
4,230 3,525 51.0 S 28.9 [8.8] 2,088 [948.0] 010924 2010966
1,321 1,101 150.0 UT 30.0 [9.2] 2,171 [985.6] 2011037 2011057
1,787 1,489 131.0 UT 30.0 [9.2] 2,171 [985.6] 2011038 2011058
2,253 1,877 104.0 UT 30.0 [9.2] 2,171 [985.6] 2011010 2011029
2,718 2,265 86.5 UT 30.0 [9.2] 2,171 [985.6] 2011011 2011030
3,650 3,042 64.5 UT 30.0 [9.2] 2,171 [985.6] 2011012 2011031
1,321 1,101 150.0 CT 30.1 [9.2] 2,181 [990.2] 2011154 2011168
390 325
1,787 1,489 131.0 CT 30.1 [9.2] 2,181 [990.2] 2011155 2011169
1,321 1,101 150.0 S 30.9 [9.4] 2,240 [1,017.0] 2010925 2010967
1,787 1,489 131.0 S 30.9 [9.4] 2,240 [1,017.0] 2010926 2010968
2,253 1,877 104.0 S 30.9 [9.4] 2,240 [1,017.0] 2010927 2010969
2,718 2,265 86.5 S 30.9 [9.4] 2,240 [1,017.0] 2010928 2010970
3,650 3,042 64.5 S 30.9 [9.4] 2,240 [1,017.0] 2010929 2010971
Return to Motors
562 Dominator* Motors—RX-XD Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
1,924 1,603 131.0 UT 32.1 [9.8] 2,323 [1,054.6] 2011095 2011117
2,426 2,022 104.0 UT 32.1 [9.8] 2,323 [1,054.6] 2011063 2011085
2,928 2,440 86.5 UT 32.1 [9.8] 2,323 [1,054.6] 2011064 2011086
3,430 2,858 73.5 UT 32.1 [9.8] 2,323 [1,054.6] 2011065 2011087
3,932 3,277 64.5 UT 32.1 [9.8] 2,323 [1,054.6] 2011066 2011088
420 1,924 350 1,603 131.0 CT 32.2 [9.8] 2,333 [1,059.2] 2011156 2011170
1,924 1,603 131.0 S 33.0 [10.1] 2,391 [1,085.5] 2010930 2010972
2,426 2,022 104.0 S 33.0 [10.1] 2,391 [1,085.5] 2010931 2010973
2,928 2,440 86.5 S 33.0 [10.1] 2,391 [1,085.5] 2010932 2010974
3,430 2,858 73.5 S 33.0 [10.1] 2,391 [1,085.5] 2010933 2010975
3,932 3,277 64.5 S 33.0 [10.1] 2,391 [1,085.5] 2010934 2010976
1,524 1,270 178.0 UT 34.2 [10.4] 2,474 [1,123.2] 2011100 2011122
2,062 1,718 131.0 UT 34.2 [10.4] 2,474 [1,123.2] 2011101 2011123
2,600 2,167 104.0 UT 34.2 [10.4] 2,474 [1,123.2] 2011069 2011091
3,137 2,614 86.5 UT 34.2 [10.4] 2,474 [1,123.2] 2011070 2011092
3,675 3,062 73.5 UT 34.2 [10.4] 2,474 [1,123.2] 2011071 2011093
4,213 3,511 64.5 UT 34.2 [10.4] 2,474 [1,123.2] 2011072 2011094
1,524 1,270 178.0 CT 34.3 [10.5] 2,484 [1,127.7] 2011157 2011171
450 375
2,062 1,718 131.0 CT 34.3 [10.5] 2,484 [1,127.7] 2011158 2011172
1,524 1,270 178.0 S 35.1 [10.7] 2,543 [1,154.5] 2010935 2010977
2,062 1,718 131.0 S 35.1 [10.7] 2,543 [1,154.5] 2010936 2010978
2,600 2,167 104.0 S 35.1 [10.7] 2,543 [1,154.5] 2010937 2010979
3,137 2,614 86.5 S 35.1 [10.7] 2,543 [1,154.5] 2010938 2010980
3,675 3,062 73.5 S 35.1 [10.7] 2,543 [1,154.5] 2010939 2010981
4,213 3,511 64.5 S 35.1 [10.7] 2,543 [1,154.5] 2010940 2010982
Return to Motors
562 Dominator Motors
Return to Motors
738 Dominator Motors
Return to Motors
738 Dominator* Motors—RK Type (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
2,065 1,720 205.9 UT 27.1 [8.3] 3,363 [1,526.8] 2013242 2013249
2,065 1,720 205.9 LT 26.6 [8.1] 3,363 [1,526.8] 2013068 2013085
700 2,604 583 2,169 163.3 S 27.1 [8.3] 3,363 [1,526.8] 2012396 2012499
3,142 2,617 135.3 S 27.1 [8.3] 3,363 [1,526.8] 2012397 2012500
4,220 3,515 100.8 S 27.1 [8.3] 3,363 [1,526.8] 2012398 2012501
2,212 1,843 206.0 UT 28.7 [8.8] 3,598 [1,633.5] 2001634 2013250
2,212 1,843 206.0 LT 28.3 [8.6] 3,598 [1,633.5] 2013069 2013086
750 2,212 625 1,843 206.0 S 28.8 [8.8] 3,598 [1,633.5] 2013305 2013311
3,367 2,805 135.3 S 28.8 [8.8] 3,598 [1,633.5] 2012399 2012502
3,943 3,285 115.5 S 28.8 [8.8] 3,598 [1,633.5] 2012400 2012503
2,360 1,966 205.9 S 30.4 [9.3] 3,832 [1,739.7] 2013306 2013312
800 2,975 666 2,478 163.3 S 30.4 [9.3] 3,832 [1,739.7] 2012401 2012504
3,591 2,991 135.3 S 30.4 [9.3] 3,832 [1,739.7] 2012402 2012505
2,507 2,088 206.0 S 32.0 [9.8] 4,066 [1,846.0] 2013307 2013313
850 3,161 708 2,633 163.3 S 32.0 [9.8] 4,066 [1,846.0] 2012403 2012506
3,815 3,178 135.3 S 32.0 [9.8] 4,066 [1,846.0] 2012404 2012507
3,347 2,788 163.3 S 33.7 [10.3] 4,300 [1,955.2] 2012406 2012509
900 750
4,040 3,365 135.3 S 33.7 [10.3] 4,300 [1,955.2] 2012405 2012508
Return to Motors
738 Dominator Motors
Return to Motors
738 Dominator* Motors—RX Type with Integral Phoenix* Sensor Adapter (continued)
Frequency, 60 Hz Frequency, 50 Hz
Power Voltage, V Power Voltage, V Current, A Type Length, Weight, Carbon Steel Redalloy* Alloy
Rating, hp Rating, hp ft [m] lbm [kg] Part Number Part Number
2,360 1,966 205.9 S 30.6 [9.3] 3,832 [1,739.7] 2013344 2013350
800 2,975 666 2,478 163.3 S 30.6 [9.3] 3,832 [1,739.7] 2013131 2013207
3,591 2,991 135.3 S 30.6 [9.3] 3,832 [1,739.7] 2013132 2013208
2,507 2,088 206.0 S 32.2 [9.8] 4,066 [1,846.0] 2013345 2013351
850 3,161 708 2,633 163.3 S 32.2 [9.8] 4,066 [1,846.0] 2013133 2013209
3,815 3,178 135.3 S 32.2 [9.8] 4,066 [1,846.0] 2013134 2013210
3,347 2,788 163.3 S 33.8 [10.3] 4,300 [1,952.2] 2013135 2013212
900 750
4,040 3,365 135.3 S 33.8 [10.3] 4300, [1,952.2] 2006498 2013211
Return to Motors
375 Maximus Motor
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
14.3 386 11.9 322 27.1 UT 5.7 [1.7] 195 [89] 100333616 100338825
447 372 35.1 UT 7.6 [2.3] 260 [118] 100333638 100338826
21.4 17.8
578 482 49.6 UT 7.6 [2.3] 260 [118] 100333640 100338827
422 352 49.6 UT 9.5 [2.9] 325 [148] 100333642 100338828
28.6 23.8
596 497 35.1 UT 9.5 [2.9] 325 [148] 100333643 100338829
418 348 62.5 UT 11.4 [3.5] 388 [176] 100333645 100338830
418 348 62.5 CT 11.6 [3.5] 388 [176] 100339324 100341797
35.7 29.7
745 621 35.1 UT 11.4 [3.5] 388 [176] 100333647 100338831
745 621 35.1 CT 11.6 [3.5] 388 [176] 100339325 100341798
502 418 62.5 UT 13.2 [4.0] 456 [207] 100333649 100338832
502 418 62.5 CT 13.5 [4.1] 456 [207] 100339326 100341799
42.8 35.7
764 637 41.1 UT 13.2 [4.0] 456 [207] 100333651 100338833
764 637 41.1 CT 13.5 [4.1] 456 [207] 100339327 100341800
586 488 62.4 UT 15.1 [4.6] 518 [235] 100333655 100338838
586 488 62.4 CT 15.4 [4.7] 518 [235] 100339330 100341803
738 615 49.6 UT 15.1 [4.6] 518 [235] 100333652 100338836
50.0 41.7
738 615 49.6 CT 15.4 [4.7] 518 [235] 100339328 100341801
1196 997 30.6 UT 15.1 [4.6] 518 [235] 100333653 100338837
1196 997 30.6 CT 15.4 [4.7] 518 [235] 100339329 100341802
669 557 62.5 UT 17.0 [5.2] 581 [264] 100333662 100338843
669 557 62.5 CT 17.4 [5.3] 581 [264] 100339333 100341807
844 703 49.6 UT 17.0 [5.2] 581 [264] 100264643 100338839
844 703 49.6 CT 17.4 [5.3] 581 [264] 100275730 100341804
57.1 47.6
1193 994 35.1 UT 17.0 [5.2] 581 [264] 100333658 100338840
1193 994 35.1 CT 17.4 [5.3] 581 [264] 100339331 100341805
1542 1285 27.1 UT 17.0 [5.2] 581 [264] 100333660 100338841
1542 1285 27.1 CT 17.4 [5.3] 581 [264] 100339332 100341806
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
753 627 62.5 UT 18.9 [5.8] 648 [295] 100333664 100338844
753 627 62.5 CT 19.2 [5.9] 648 [295] 100339334 100341808
949 791 49.6 UT 18.9 [5.8] 648 [295] 100333665 100338846
949 791 49.6 CT 19.2 [5.9] 648 [295] 100339335 100341810
1342 1118 35.1 UT 18.9 [5.8] 648 [295] 100333667 100338847
64.3 53.6
1342 1118 35.1 CT 19.2 [5.9] 648 [295] 100339336 100341811
1538 1282 30.6 UT 18.9 [5.8] 648 [295] 100333668 100338848
1538 1282 30.6 CT 19.2 [5.9] 648 [295] 100339337 100341812
1735 1446 1446.0 UT 18.9 [5.8] 648 [295] 100333669 100338849
1735 1446 1446.0 CT 19.2 [5.9] 648 [295] 100339338 100341813
837 697 62.5 UT 20.8 [6.3] 680 [309] 100333671 100338850
837 697 62.5 CT 21.0 [6.4] 680 [309] 100339339 100341814
1055 879 49.6 UT 20.8 [6.3] 680 [309] 100333673 100338851
1055 879 49.6 CT 21.0 [6.4] 680 [309] 100339340 100341815
71.4 59.5
1491 1242 35.1 UT 20.8 [6.3] 680 [309] 100333674 100338852
1491 1242 35.1 CT 21.0 [6.4] 680 [309] 100339341 100341816
1710 1425 30.6 UT 20.8 [6.3] 680 [309] 100333676 100338853
1710 1425 30.6 CT 21.0 [6.4] 680 [309] 100339342 100341817
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
14.3 386 11.9 322 27.1 UT 5.7 [1.7] 195 [89] 100336915 100338902
447 372 35.1 UT 7.6 [2.3] 260 [118] 100336916 100338903
21.4 17.8
578 482 49.6 UT 7.6 [2.3] 260 [118] 100336917 100338904
422 352 49.6 UT 9.5 [2.9] 325 [148] 100336918 100338905
28.6 23.8
596 497 35.1 UT 9.5 [2.9] 325 [148] 100336919 100338906
418 348 62.5 UT 11.4 [3.5] 388 [176] 100336920 100338907
418 348 62.5 CT 11.6 [3.5] 388 [176] 100339830 100342074
35.7 29.7
745 621 35.1 UT 11.4 [3.5] 388 [176] 100336921 100338908
745 621 35.1 CT 11.6 [3.5] 388 [176] 100339833 100342075
502 418 62.5 UT 13.2 [4.0] 456 [207] 100336922 100338909
502 418 62.5 CT 13.5 [4.1] 456 [207] 100339836 100342076
42.8 35.7
764 637 41.1 UT 13.2 [4.0] 456 [207] 100336923 100338910
764 637 41.1 CT 13.5 [4.1] 456 [207] 100339838 100342077
586 488 62.4 UT 15.1 [4.6] 518 [235] 100336926 100338914
586 488 62.4 CT 15.4 [4.7] 518 [235] 100339844 100342081
738 615 49.6 UT 15.1 [4.6] 518 [235] 100336924 100338912
50.0 41.7
738 615 49.6 CT 15.4 [4.7] 518 [235] 100339841 100342078
1196 997 30.6 UT 15.1 [4.6] 518 [235] 100336925 100338913
1196 997 30.6 CT 15.4 [4.7] 518 [235] 100339843 100342080
669 557 62.5 UT 17.0 [5.2] 581 [264] 100336930 100339115
669 557 62.5 CT 17.4 [5.3] 581 [264] 100339849 100342086
844 703 49.6 UT 17.0 [5.2] 581 [264] 100336927 100338916
844 703 49.6 CT 17.4 [5.3] 581 [264] 100339845 100342083
57.1 47.6
1193 994 35.1 UT 17.0 [5.2] 581 [264] 100336928 100339111
1193 994 35.1 CT 17.4 [5.3] 581 [264] 100339847 100342084
1542 1285 27.1 UT 17.0 [5.2] 581 [264] 100336929 100339112
1542 1285 27.1 CT 17.4 [5.3] 581 [264] 100339848 100342085
753 627 62.5 UT 18.9 [5.8] 648 [295] 100336931 100339118
753 627 62.5 CT 19.2 [5.9] 648 [295] 100339850 100342087
949 791 49.6 UT 18.9 [5.8] 648 [295] 100336932 100339119
949 791 49.6 CT 19.2 [5.9] 648 [295] 100339852 100342088
1342 1118 35.1 UT 18.9 [5.8] 648 [295] 100336933 100339120
64.3 53.6
1342 1118 35.1 CT 19.2 [5.9] 648 [295] 100339853 100342089
1538 1282 30.6 UT 18.9 [5.8] 648 [295] 100336934 100339121
1538 1282 30.6 CT 19.2 [5.9] 648 [295] 100339855 100342090
1735 1446 1446.0 UT 18.9 [5.8] 648 [295] 100336935 100339122
1735 1446 1446.0 CT 19.2 [5.9] 648 [295] 100339856 100342091
837 697 62.5 UT 20.8 [6.3] 680 [309] 100336936 100339123
837 697 62.5 CT 21.0 [6.4] 680 [309] 100339857 100342092
1055 879 49.6 UT 20.8 [6.3] 680 [309] 100336937 100339124
1055 879 49.6 CT 21.0 [6.4] 680 [309] 100339858 100342095
71.4 59.5
1491 1242 35.1 UT 20.8 [6.3] 680 [309] 100336938 100339125
1491 1242 35.1 CT 21.0 [6.4] 680 [309] 100339859 100342098
1710 1425 30.6 UT 20.8 [6.3] 680 [309] 100336939 100339126
1710 1425 30.6 CT 21.0 [6.4] 680 [309] 100339860 100342100
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
463 386 42.3 S-GRB 5.8 [1.8] 266 [121] 100315385 100315980
719 599 27.2 S-GRB 5.8 [1.8] 266 [121] 100316645 100317214
30.0 25.0
463 386 42.3 S 5.7 [1.7] 266 [121] 100316343 100316348
719 599 27.2 S 5.7 [1.7] 266 [121] 100317318 100317384
578 482 42.5 S-GRB 6.7 [2.0] 303 [138] 100316652 100317215
899 749 27.3 S-GRB 6.7 [2.0] 303 [138] 100316653 100317216
37.5 31.3
578 482 42.5 S 6.6 [2.0] 303 [138] 100317319 100317385
899 749 27.3 S 6.6 [2.0] 303 [138] 100317320 100317386
438 365 67.1 S-GRB 7.4 [2.3] 339 [154] 100316654 100317217
823 686 35.7 S-GRB 7.4 [2.3] 339 [154] 100316655 100317218
950 792 30.9 S-GRB 7.4 [2.3] 339 [154] 100316656 100317219
45.0 37.5
438 365 67.1 S 7.3 [2.2] 339 [154] 100317321 100317387
823 686 35.7 S 7.3 [2.2] 339 [154] 100317322 100317388
950 792 30.9 S 7.3 [2.2] 339 [154] 100317323 100317389
660 550 52.0 S-GRB 8.3 [2.5] 376 [154] 100316657 100317220
736 614 46.7 S-GRB 8.3 [2.5] 376 [171] 100316661 100317222
959 799 35.8 S-GRB 8.3 [2.5] 376 [171] 100316658 100317223
1109 924 31.0 S-GRB 8.3 [2.5] 376 [171] 100316660 100317237
52.5 43.8
660 550 52.0 S 8.2 [2.5] 376 [171] 100317324 100317390
736 614 46.7 S 8.2 [2.5] 376 [171] 100317327 100317392
959 799 35.8 S 8.2 [2.5] 376 [171] 100317325 100317393
1109 924 31.0 S 8.2 [2.5] 376 [171] 100317326 100317394
754 628 52.1 S-GRB 9.0 [2.7] 413 [188] 100316667 100317238
925 771 42.3 S-GRB 9.0 [2.7] 413 [188] 100316670 100317239
1096 913 35.7 S-GRB 9.0 [2.7] 413 [188] 100316668 100317240
1438 1198 27.2 S-GRB 9.0 [2.7] 413 [188] 100316669 100317241
60.0 50.0
754 628 52.1 S 8.9 [2.7] 413 [188] 100317328 100317395
925 771 42.3 S 8.9 [2.7] 413 [188] 100317329 100317396
1096 913 35.7 S 8.9 [2.7] 413 [188] 100317330 100317397
1438 1198 27.2 S 8.9 [2.7] 413 [188] 100317331 100317398
849 708 52.0 S-GRB 9.9 [3.0] 450 [205] 100316671 100317242
1233 1027 35.8 S-GRB 9.9 [3.0] 450 [205] 100316672 100317243
67.5 56.3
849 708 52.0 S 9.8 [3.0] 450 [205] 100317332 100317399
1233 1027 35.8 S 9.8 [3.0] 450 [205] 100317333 100317400
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
943 786 52.0 S-GRB 10.6 [3.2] 486 [221] 100316674 100317245
1157 964 42.3 S-GRB 10.6 [3.2] 486 [221] 100316675 100317248
1477 1231 33.3 S-GRB 10.6 [3.2] 486 [221] 100316673 100317244
1797 1498 27.3 S-GRB 10.6 [3.2] 486 [221] 100316676 100317250
943 786 52.0 S 10.5 [3.2] 486 [221] 100317335 100317403
1157 964 42.3 S 10.5 [3.2] 486 [221] 100317336 100317404
1477 1231 33.3 S 10.5 [3.2] 486 [221] 100317334 100317401
1797 1498 27.3 S 10.5 [3.2] 486 [221] 100317337 100317405
75.0 62.5
943 786 52.0 UT 10.7 [3.3] 482 [219] 100295838 tba†
1157 964 42.3 UT 10.7 [3.3] 482 [219] 100295839 100297269
1477 1231 33.3 UT 10.7 [3.3] 482 [219] 100295837 100297265
1797 1498 27.3 UT 10.7 [3.3] 482 [219] 100295841 100297270
943 786 52.0 LT-GRB 10.4 [3.2] 443 [201] 100304913 100305019
1157 964 42.3 LT-GRB 10.4 [3.2] 443 [201] 100304914 100305020
1477 1231 33.3 LT-GRB 10.4 [3.2] 443 [201] 100304908 100305018
1797 1498 27.3 LT-GRB 10.4 [3.2] 443 [201] 100304915 100305021
803 669 67.3 S-GRB 10.0 [3.0] 523 [238] 100316677 100317253
921 767 58.7 S-GRB 10.0 [3.0] 523 [238] 100316681 100317257
1272 1060 42.5 S-GRB 10.0 [3.0] 523 [238] 100316678 100317255
1978 1648 27.3 S-GRB 10.0 [3.0] 523 [238] 100316679 100317256
803 669 67.3 S 10.1 [3.1] 523 [238] 100317338 100317406
82.5 921 68.8 767 58.7 S 10.1 [3.1] 523 [238] 100317341 100317409
1272 1060 42.5 S 10.1 [3.1] 523 [238] 100317339 100317407
1978 1648 27.3 S 10.1 [3.1] 523 [238] 100317340 100317408
921 767 58.7 UT 11.5 [3.5] 519 [236] 100295847 100297276
1272 1060 42.5 UT 11.5 [3.5] 519 [236] 100295844 100297274
1978 1648 27.3 UT 11.5 [3.5] 519 [236] 100295845 100297275
875 730 67.4 S-GRB 11.8 [3.6] 560 [255] 100316682 100317258
1516 1263 38.7 S-GRB 11.8 [3.6] 560 [255] 100316683 100317259
1901 1584 31.0 S-GRB 11.8 [3.6] 560 [255] 100316685 100317261
2156 1797 27.2 S-GRB 11.8 [3.6] 560 [255] 100316684 100317260
875 730 67.4 S 11.9 [3.6] 560 [255] 100317342 100317411
1516 1263 38.7 S 11.9 [3.6] 560 [255] 100317343 100317412
1901 1584 31.0 S 11.9 [3.6] 560 [255] 100317345 100317415
2156 1797 27.2 S 11.9 [3.6] 560 [255] 100317344 100317413
90.0 75.0
875 730 67.4 UT 12.3 [3.8] 555 [252] 100295849 100297277
1516 1263 38.7 UT 12.3 [3.8] 555 [252] 100295851 100297279
1901 1584 31.0 UT 12.3 [3.8] 555 [252] 100295854 100297281
2156 1797 27.2 UT 12.3 [3.8] 555 [252] 100295853 100297280
875 730 67.4 LT-GRB 12.0 [3.7] 532 [242] 100304916 100305023
1516 1263 38.7 LT-GRB 12.0 [3.7] 532 [242] 100304917 100305024
1901 1584 31.0 LT-GRB 12.0 [3.7] 532 [242] 100304920 100305027
2156 1797 27.2 LT-GRB 12.0 [3.7] 532 [242] 100304918 100305026
† to be assigned
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
949 791 67.3 S-GRB 11.8 [3.6] 597 [271] 100316686 100317262
1227 1022 52.0 S-GRB 11.8 [3.6] 597 [271] 100316687 100317263
1782 1485 35.8 S-GRB 11.8 [3.6] 597 [271] 100316689 100317265
2060 1717 31.0 S-GRB 11.8 [3.6] 597 [271] 100316688 100317264
949 791 67.3 S 11.9 [3.6] 597 [271] 100317346 100317416
1227 1022 52.0 S 11.9 [3.6] 597 [271] 100317347 100317417
97.5 81.3
1782 1485 35.8 S 11.9 [3.6] 597 [271] 100317349 100317419
2060 1717 31.0 S 11.9 [3.6] 597 [271] 100317348 100317418
949 791 67.3 UT 13.1 [4.0] 592 [269] 100295855 100297282
1227 1022 52.0 UT 13.1 [4.0] 592 [269] 100295866 100297283
1782 1485 35.8 UT 13.1 [4.0] 592 [269] 100295868 100297285
2060 1717 31.0 UT 13.1 [4.0] 592 [269] 100295867 100297284
1021 851 67.1 S-GRB 13.4 [4.1] 633 [288] 100316690 100317266
1470 1225 46.6 S-GRB 13.4 [4.1] 633 [288] 100316691 100317267
2067 1723 33.3 S-GRB 13.4 [4.1] 633 [288] 100316693 100317269
2217 1848 30.9 S-GRB 13.4 [4.1] 633 [288] 100316692 100317268
1021 851 67.1 UT 13.9 [4.2] 628 [285] 100295870 100297286
1470 1225 46.6 UT 13.9 [4.2] 628 [285] 100295928 100297288
105.0 87.5
2067 1723 33.3 UT 13.9 [4.2] 628 [285] 100295933 100297290
2217 1848 30.9 UT 13.9 [4.2] 628 [285] 100295930 100297289
1021 851 67.1 LT-GRB 13.6 [4.1] 621 [282] 100304921 100305029
1470 1225 46.6 LT-GRB 13.6 [4.1] 621 [282] 100304922 100305030
2067 1723 33.3 LT-GRB 13.6 [4.1] 621 [282] 100304924 100305032
2217 1848 30.9 LT-GRB 13.6 [4.1] 621 [282] 100304923 100305031
935 779 78.9 S-GRB 14.2 [4.3] 670 [305] 100316694 100317270
1415 1230 52.0 S-GRB 14.2 [4.3] 670 [305] 100316695 100317271
2057 1714 35.8 S-GRB 14.2 [4.3] 670 [305] 100316696 100317272
112.5 93.8
935 779 78.9 UT 14.7 [4.5] 665 [302] 100295935 100297291
1476 1230 51.3 UT 14.8 [4.5] 665 [302] 100295937 100297292
2057 1714 35.8 UT 14.7 [4.5] 665 [302] 100295941 100297293
997 831 78.6 S-GRB 15.0 [4.6] 706 [321] 100316697 100317273
1508 1257 52.0 S-GRB 15.0 [4.6] 706 [321] 100316698 100317274
2192 1826 35.8 S-GRB 15.0 [4.6] 706 [321] 100316699 100317275
2533 2111 30.9 S-GRB 15.0 [4.6] 706 [321] 100316700 100317276
997 831 78.6 UT 15.5 [4.7] 702 [319] 100295944 100297294
120.0 1508 100.0 1257 52.0 UT 15.5 [4.7] 702 [319] 100295945 100297295
2192 1826 35.8 UT 15.5 [4.7] 702 [319] 100295952 100297297
2533 2111 30.9 UT 15.5 [4.7] 702 [319] 100295948 100297296
1508 1257 52.0 LT-GRB 15.2 [4.6] 709 [322] 100304925 100305033
2192 1826 35.8 LT-GRB 15.2 [4.6] 709 [322] 100304927 100305037
2533 2111 30.9 LT-GRB 15.2 [4.6] 709 [322] 100304926 100305034
© Schlumberger 2008
Motors n 456 Maximus Motors *Mark of Schlumberger
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1059 882 78.9 S-GRB 15.8 [4.8] 743 [338] 100316701 100317277
1241 1035 67.3 S-GRB 15.8 [4.8] 743 [338] 100316702 100317278
1423 1186 58.7 S-GRB 15.8 [4.8] 743 [338] 100316703 100317279
2150 1791 38.8 S-GRB 15.8 [4.8] 743 [338] 100316704 100317280
127.5 106.3
1059 882 78.9 UT 16.3 [5.0] 741 [337] 100295954 100297298
1241 1035 67.3 UT 16.3 [5.0] 741 [337] 100295959 100297299
1423 1186 58.7 UT 16.3 [5.0] 741 [337] 100295963 100297300
2150 1791 38.8 UT 16.3 [5.0] 741 [337] 100295964 100297301
1121 934 78.9 S-GRB 16.6 [5.1] 784 [356] 100316705 100317281
1313 1094 67.4 S-GRB 16.6 [5.1] 784 [356] 100316706 100317282
1505 1254 58.7 S-GRB 16.6 [5.1] 784 [356] 100316707 100317283
2081 1734 42.5 S-GRB 16.6 [5.1] 784 [356] 100316711 100317284
2658 2215 33.3 S-GRB 16.6 [5.1] 784 [356] 100316712 100317285
1121 934 78.9 UT 17.1 [5.2] 780 [355] 100295965 100297302
1313 1094 67.4 UT 17.1 [5.2] 780 [355] 100295969 100297306
135.0 1505 112.5 1254 58.7 UT 17.1 [5.2] 780 [355] 100295966 100297303
2081 1734 42.5 UT 17.1 [5.2] 780 [355] 100296014 100297307
2658 2215 33.3 UT 17.1 [5.2] 780 [355] 100295967 100297305
1121 934 78.9 LT-GRB 16.8 [5.1] 798 [363] 100304928 100305038
1313 1094 67.4 LT-GRB 16.8 [5.1] 798 [363] 100304931 100305043
1505 1254 58.7 LT-GRB 16.8 [5.1] 798 [363] 100304929 100305039
2081 1734 42.5 LT-GRB 16.8 [5.1] 798 [363] 100304932 100305044
2658 2215 33.3 LT-GRB 16.8 [5.1] 798 [363] 100304930 100305041
1184 987 78.8 S-GRB 17.4 [5.3] 821 [373] 100316718 100317289
1793 1494 52.0 S-GRB 17.4 [5.3] 821 [373] 100316713 100317286
2199 1833 42.5 S-GRB 17.4 [5.3] 821 [373] 100316714 100317287
2403 2002 38.8 S-GRB 17.4 [5.3] 821 [373] 100316717 100317288
1184 987 78.8 UT 17.9 [5.5] 817 [371] 100303935 100303937
1793 1494 52.0 UT 17.9 [5.5] 817 [371] 100296020 100297308
142.5 118.8
2199 1833 42.5 UT 17.9 [5.5] 817 [371] 100296022 100297309
2403 2002 38.8 UT 17.9 [5.5] 817 [371] 100296025 100297310
1184 987 78.8 LT-GRB 17.6 [5.4] 835 [380] 100304957 100305048
1793 1494 52.0 LT-GRB 17.6 [5.4] 835 [380] 100304953 100305045
2199 1833 42.5 LT-GRB 17.6 [5.4] 835 [380] 100304954 100305046
2403 2002 38.8 LT-GRB 17.6 [5.4] 835 [380] 100304956 100305047
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1246 1038 78.6 S-GRB 18.2 [5.5] 858 [390] 100316719 100317290
1673 1394 58.7 S-GRB 18.2 [5.5] 858 [390] 100316720 100317291
1886 1572 52.1 S-GRB 18.2 [5.5] 858 [390] 100316723 100317293
2314 1928 42.3 S-GRB 18.2 [5.5] 858 [390] 100316721 100317292
1246 1038 78.6 UT 18.7 [5.7] 853 [388] 100296027 100297311
150.0 1673 125.0 1394 58.7 UT 18.7 [5.7] 853 [388] 100296030 100297312
1886 1572 52.1 UT 18.7 [5.7] 853 [388] 100296034 100297314
2314 1928 42.3 UT 18.7 [5.7] 853 [388] 100296032 100297313
1246 1038 78.6 LT-GRB 18.4 [5.6] 871 [396] 100304958 100305049
1673 1394 58.7 LT-GRB 18.4 [5.6] 871 [396] 100304959 100305050
2314 1928 42.3 LT-GRB 18.4 [5.6] 871 [396] 100304961 100305270
1981 1651 52.0 S-GRB 19.0 [5.8] 895 [407] 100316725 100305269
2205 1838 46.8 S-GRB 19.0 [5.8] 895 [407] 100316726 100317295
1981 1651 52.0 UT 19.5 [5.9] 895 [407] 100296036 100297315
157.5 131.3
2205 1838 46.8 UT 19.5 [5.9] 890 [405] 100296039 100297316
1981 1651 52.0 LT-GRB 19.2 [5.9] 908 [413] 100304965 100305271
2205 1838 46.8 LT-GRB 19.2 [5.9] 908 [413] 100304966 100305272
1370 1142 78.6 S-GRB 19.8 [6.0] 931 [423] 100316727 100317296
1839 1533 58.8 S-GRB 19.8 [6.0] 931 [423] 100316729 100317298
2075 1729 52.1 S-GRB 19.8 [6.0] 931 [423] 100316730 100317299
2545 2121 42.3 S-GRB 19.8 [6.0] 931 [423] 100316728 100317297
1370 1142 78.6 UT 20.3 [6.2] 926 [421] 100296041 100297317
1839 1533 58.8 UT 20.3 [6.2] 926 [421] 100296046 100297320
165.0 2075 137.5 1729 52.1 UT 20.3 [6.2] 926 [421] 100296047 100297321
2545 2121 42.3 UT 20.3 [6.2] 926 [421] 100303938 100303940
2779 2316 38.7 UT 20.3 [6.2] 926 [421] 100296044 100297319
1370 1142 78.6 LT-GRB 20.0 [6.1] 945 [430] 100304967 100305273
1839 1533 58.8 LT-GRB 20.0 [6.1] 945 [430] 100304994 100305275
2075 1729 52.1 LT-GRB 20.0 [6.1] 945 [430] 100304996 100305276
2545 2121 42.3 LT-GRB 20.0 [6.1] 945 [430] 100304968 100305274
1238 1032 95.0 S-GRB 21.4 [6.5] 1,004 [456] 100316731 100317300
1495 1245 78.9 S-GRB 21.4 [6.5] 1,004 [456] 100316732 100317301
2262 1885 52.0 S-GRB 21.4 [6.5] 1,004 [456] 100316733 100317302
2520 2100 46.6 S-GRB 21.4 [6.5] 1,004 [456] 100316734 100317303
1238 1032 95.0 UT 21.9 [6.7] 1,000 [455] 100303941 100303944
1495 1245 78.9 UT 21.9 [6.7] 1,000 [455] 100296052 100297323
180.0 150.0
2262 1885 52.0 UT 21.9 [6.7] 1,000 [455] 100296055 100297324
2520 2100 46.6 UT 21.9 [6.7] 1,000 [455] 100296059 100297326
1238 1032 95.0 LT-GRB 21.6 [6.6] 1,018 [463] 100304997 100305277
1495 1245 78.9 LT-GRB 21.6 [6.6] 1,018 [463] 100304998 100305278
2262 1885 52.0 LT-GRB 21.6 [6.6] 1,018 [463] 100305000 100305280
2520 2100 46.6 LT-GRB 21.6 [6.6] 1,018 [463] 100305001 100305281
© Schlumberger 2008
Motors n 456 Maximus Motors *Mark of Schlumberger
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1342 1118 95.0 S-GRB 23.0 [7.0] 1,078 [490] 100316735 100317304
1619 1349 78.6 S-GRB 23.0 [7.0] 1,078 [490] 100316736 100317305
2730 2275 46.6 S-GRB 23.0 [7.0] 1,078 [490] 100316739 100317306
1342 1118 95.0 UT 23.6 [7.2] 1,073 [488] 100303945 100303947
195.0 1619 162.5 1349 78.6 UT 23.6 [7.2] 1,073 [488] 100296060 100297327
2730 2275 46.6 UT 23.6 [7.2] 1,073 [488] 100296061 100297329
1342 1118 95.0 LT-GRB 23.2 [7.1] 1,092 [496] 100305002 100305282
1619 1349 78.6 LT-GRB 23.2 [7.1] 1,092 [496] 100305003 100305283
2730 2275 46.6 LT-GRB 23.2 [7.1] 1,092 [496] 100305005 100305284
2346 1955 58.7 S-GRB 24.7 [7.5] 1,151 [523] 100316741 100317308
2640 2200 52.0 S-GRB 24.7 [7.5] 1,151 [523] 100316740 100317307
2346 1955 58.7 UT 25.2 [7.7] 1,147 [521] 100296064 100297331
210.0 175.0
2640 2200 52.0 UT 25.2 [7.7] 1,147 [521] 100296063 100297330
2346 1955 58.8 LT-GRB 24.8 [7.6] 1,165 [530] 100305007 100305286
2640 2200 52.0 LT-GRB 24.8 [7.6] 1,165 [530] 100305006 100305285
1868 1557 78.9 S-GRB 26.3 [8.0] 1,225 [557] 100316743 100317310
2829 2357 52.0 S-GRB 26.3 [8.0] 1,225 [557] 100316742 100317309
1868 1557 78.9 UT 26.8 [8.2] 1,220 [555] 100296069 100297335
225.0 187.5
2829 2357 52.0 UT 26.8 [8.2] 1,220 [555] 100296067 100297332
1868 1557 78.9 LT-GRB 26.4 [8.0] 1,248 [567] 100305009 100305288
2829 2357 52.0 LT-GRB 26.4 [8.0] 1,248 [567] 100305008 100305287
1993 1661 78.6 S-GRB 27.9 [8.5] 1,298 [590] 100316744 100317311
2676 2230 58.7 S-GRB 27.9 [8.5] 1,298 [590] 100316745 100317312
1993 1661 78.6 UT 28.4 [8.7] 1,293 [588] 100296072 100297337
240.0 200.0
2676 2230 58.7 UT 28.4 [8.7] 1,293 [588] 100296073 100297339
1993 1661 78.6 LT-GRB 28.0 [8.5] 1,293 [588] 100305010 100305289
2676 2230 58.7 LT-GRB 28.0 [8.5] 1,293 [588] 100305011 100305291
2118 1765 78.6 S-GRB 29.5 [9.0] 1,371 [623] 100316747 100317314
2842 2369 58.7 S-GRB 29.5 [9.0] 1,371 [623] 100316746 100317313
2118 1765 78.6 UT 30.0 [9.1] 1,367 [621] 100296078 100297341
255.0 212.5
2842 2369 58.7 UT 30.0 [9.1] 1,367 [621] 100296075 100297340
2118 1765 78.6 LT-GRB 29.7 [9.1] 1,390 [632] 100305013 100305293
2842 2369 58.7 LT-GRB 29.7 [9.1] 1,390 [632] 100305012 100305292
1858 1549 95.0 S-GRB 31.1 [9.5] 1,449 [659] 100316750 100317317
2241 1868 78.6 S-GRB 31.1 [9.5] 1,449 [659] 100316749 100317316
2626 2189 67.1 S-GRB 31.1 [9.5] 1,449 [659] 100316748 100317315
1858 1549 95.0 UT 31.6 [9.6] 1,440 [655] 100296086 100297345
270.0 2241 225.0 1868 78.6 UT 31.6 [9.6] 1,440 [655] 100296083 100297344
2626 2189 67.1 UT 31.6 [9.6] 1,440 [655] 100296080 100297342
1858 1549 95.0 LT-GRB 31.3 [9.5] 1,463 [665] 100305016 100305296
2241 1868 78.6 LT-GRB 31.3 [9.5] 1,463 [665] 100305015 100305295
2626 2189 67.1 LT-GRB 31.3 [9.5] 1,463 [665] 100305014 100305294
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
485 404 47.4 S-GRB 5.1 [1.6] 380 [173] 100373126 100373005
787 656 28.8 S-GRB 5.1 [1.6] 380 [173] 100373127 100373006
485 404 47.4 S 5.1 [1.6] 380 [173] 100374391 100374547
37.5 31.3
787 656 28.8 S 5.1 [1.6] 380 [173] 100374395 100374548
485 404 47.4 S-Gauge† 6.0 [1.8] 420 [191] 100521202 100523866
787 656 28.8 S-Gauge 6.0 [1.8] 420 [191] 100528816 100528932
453 378 77.3 S-GRB 6.2 [1.9] 470 [214] 100373128 100373007
1205 1004 28.2 S-GRB 6.2 [1.9] 470 [214] 100373129 100373008
453 378 77.3 S 6.2 [1.9] 470 [214] 100374396 100374549
58.3 46.9
1205 1004 28.2 S 6.2 [1.9] 470 [214] 100374397 100374550
453 378 77.3 S-Gauge 8.0 [2.4] 510 [232] 100528817 100528933
1205 1004 28.2 S-Gauge 8.0 [2.4] 510 [232] 100528818 100528934
517 430 88.1 S-GRB 7.1 [2.2] 534 [243] 100373130 100373009
895 746 50.9 S-GRB 7.1 [2.2] 534 [243] 100373131 100373010
1272 1060 36.0 S-GRB 7.1 [2.2] 534 [243] 100373132 100373011
517 430 88.1 S 7.1 [2.2] 534 [243] 100374398 100374551
75.0 895 62.5 746 50.9 S 7.1 [2.2] 534 [243] 100374399 100374552
1272 1060 36.0 S 7.1 [2.2] 534 [243] 100374400 100374553
517 430 88.1 S-Gauge 8.0 [2.4] 574 [261] 100528819 100528935
895 746 50.9 S-Gauge 8.0 [2.4] 574 [261] 100528820 100528936
1272 1060 36.0 S-Gauge 8.0 [2.4] 574 [261] 100528821 100528937
463 386 124.0 S-GRB 8.3 [2.5] 622 [283] 100373133 100373012
654 545 88.1 S-GRB 8.3 [2.5] 622 [283] 100373134 100373013
1036 863 55.1 S-GRB 8.3 [2.5] 622 [283] 100373135 100373014
1323 1102 43.2 S-GRB 8.3 [2.5] 622 [283] 100373136 100373015
463 386 124.0 S 8.3 [2.5] 622 [283] 100374401 100374554
654 545 88.1 S 8.3 [2.5] 622 [283] 100374402 100374555
93.8 88.1
1036 863 55.1 S 8.3 [2.5] 622 [283] 100374403 100374556
1323 1102 43.2 S 8.3 [2.5] 622 [283] 100374404 100374557
463 386 124.0 S-Gauge 10.0 [3.0] 662 [301] 100528822 100528938
654 545 88.1 S-Gauge 10.0 [3.0] 662 [301] 100528823 100528939
1036 863 55.1 S-Gauge 10.0 [3.0] 662 [301] 100528824 100528940
1323 1102 43.2 S-Gauge 10.0 [3.0] 662 [301] 100528825 100528941
† Gauge is an integral gauge.
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
888 740 77.3 S-GRB 9.2 [2.8] 686 [312] 100373137 100373016
1001 834 67.7 S-GRB 9.2 [2.8] 686 [312] 100373138 100373017
1228 1023 55.1 S-GRB 9.2 [2.8] 686 [312] 100373139 100373018
1455 1212 47.4 S-GRB 9.2 [2.8] 686 [312] 100373141 100373020
1568 1307 43.8 S-GRB 9.2 [2.8] 686 [312] 100373140 100373019
2248 1874 30.6 S-GRB 9.2 [2.8] 686 [312] 100373142 100373021
888 740 77.3 S 9.2 [2.8] 686 [312] 100374405 100374558
1001 834 67.7 S 9.2 [2.8] 686 [312] 100374406 100374559
1228 1023 55.1 S 9.2 [2.8] 686 [312] 100374407 100374561
113.0 93.8
1455 1212 47.4 S 9.2 [2.8] 686 [312] 100374409 100374565
1568 1307 43.8 S 9.2 [2.8] 686 [312] 100374408 100374562
2248 1874 30.6 S 9.2 [2.8] 686 [312] 100374410 100374567
888 740 77.3 S-Gauge† 11.0 [3.4] 726 [330] 100528826 100528942
1001 834 67.7 S-Gauge 11.0 [3.4] 726 [330] 100528827 100528943
1228 1023 55.1 S-Gauge 11.0 [3.4] 726 [330] 100528828 100528944
1455 1212 47.4 S-Gauge 11.0 [3.4] 726 [330] 100528829 100528945
1568 1307 43.8 S-Gauge 11.0 [3.4] 726 [330] 100528830 100528946
2248 1874 30.6 S-Gauge 11.0 [3.4] 726 [330] 100528831 100528947
511 426 157.0 S-GRB 10.4 [3.2] 773 [351] 100373143 100373022
912 760 88.1 S-GRB 10.4 [3.2] 773 [351] 100373144 100373023
1178 982 67.7 S-GRB 10.4 [3.2] 773 [351] 100373145 100373024
1445 1204 55.1 S-GRB 10.4 [3.2] 773 [351] 100373146 100373025
511 426 157.0 S 10.4 [3.2] 773 [351] 100374411 100374569
912 760 88.1 S 10.4 [3.2] 773 [351] 100374412 100374570
131.0 109.0
1178 982 67.7 S 10.4 [3.2] 773 [351] 100374413 100374571
1445 1204 55.1 S 10.4 [3.2] 773 [351] 100374414 100374572
511 426 157.0 S-Gauge 12.0 [3.7] 813 [370] 100528832 100528948
912 760 88.1 S-Gauge 12.0 [3.7] 813 [370] 100528833 100528949
1178 982 67.7 S-Gauge 12.0 [3.7] 813 [370] 100528834 100528950
1445 1204 55.1 S-Gauge 12.0 [3.7] 813 [370] 100528835 100528951
† Gauge is an integral gauge.
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1033 861 88.1 S-GRB 11.3 [3.4] 837 [380] 100373147 100373026
1335 1113 67.7 S-GRB 11.3 [3.4] 837 [380] 100373148 100373027
1486 1238 61.1 S-GRB 11.3 [3.4] 837 [380] 100373149 100373028
2393 1994 38.4 S-GRB 11.3 [3.4] 837 [380] 100373150 100373029
2696 2247 33.6 S-GRB 11.3 [3.4] 837 [380] 100373151 100373030
1033 861 88.1 S 11.3 [3.4] 837 [380] 100374415 100374573
1335 1113 67.7 S 11.3 [3.4] 837 [380] 100374416 100374574
1486 1238 61.1 S 11.3 [3.4] 837 [380] 100374417 100374575
2393 1994 38.4 S 11.3 [3.4] 837 [380] 100374418 100374576
2696 2247 33.6 S 11.3 [3.4] 837 [380] 100374419 100374577
1033 861 88.1 S-Gauge† 13.0 [4.0] 877 [399] 100528836 100528952
1335 1113 67.7 S-Gauge 13.0 [4.0] 877 [399] 100528837 100528953
150.0 1486 125.0 1238 61.1 S-Gauge 13.0 [4.0] 877 [399] 100528838 100528954
2393 1994 38.4 S-Gauge 13.0 [4.0] 877 [399] 100528839 100528955
2696 2247 33.6 S-Gauge 13.0 [4.0] 877 [399] 100528840 100528956
1033 861 88.1 UT 11.5 [3.5] 847 [385] 100375568 100374841
1335 1113 67.7 UT 11.5 [3.5] 847 [385] 100375569 100374843
1486 1238 61.1 UT 11.5 [3.5] 847 [385] 100375570 100374849
2393 1994 38.4 UT 11.5 [3.5] 847 [385] 100375571 100374850
2696 2247 33.6 UT 11.5 [3.5] 847 [385] 100375572 100374851
1033 861 88.1 UT HSS 11.5 [3.5] 847 [385] 100376316 100376407
1335 1113 67.7 UT HSS 11.5 [3.5] 847 [385] 100376317 100376408
1486 1238 61.1 UT HSS 11.5 [3.5] 847 [385] 100376318 100376409
2393 1994 38.4 UT HSS 11.5 [3.5] 847 [385] 100376319 100376410
2696 2247 33.6 UT HSS 11.5 [3.5] 847 [385] 100376320 100376411
† Gauge is an integral gauge.
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
999 833 104.0 S-GRB 12.5 [3.8] 925 [420] 100373152 100373031
1170 975 88.1 S-GRB 12.5 [3.8] 925 [420] 100373153 100373032
1513 1260 67.7 S-GRB 12.5 [3.8] 925 [420] 100373154 100373033
1855 1546 55.1 S-GRB 12.5 [3.8] 925 [420] 100373155 100373034
999 833 104.0 S 12.5 [3.8] 925 [420] 100374420 100374578
1170 975 88.1 S 12.5 [3.8] 925 [420] 100374421 100374579
1513 1260 67.7 S 12.5 [3.8] 925 [420] 100374422 100374580
1855 1546 55.1 S 12.5 [3.8] 925 [420] 100374423 100374581
999 833 104.0 S-Gauge† 14.0 [4.3] 965 [439] 100528841 100528957
1170 975 88.1 S-Gauge 14.0 [4.3] 965 [439] 100528842 100528958
169.0 141.0
1513 1260 67.7 S-Gauge 14.0 [4.3] 965 [439] 100528843 100528959
1855 1546 55.1 S-Gauge 14.0 [4.3] 965 [439] 100528844 100528960
999 833 104.0 UT 14.0 [4.3] 965 [439] 100375573 100374853
1170 975 88.1 UT 14.0 [4.3] 965 [439] 100375578 100374854
1513 1260 67.7 UT 14.0 [4.3] 965 [439] 100375579 100374855
1855 1546 55.1 UT 14.0 [4.3] 965 [439] 100375580 100374859
999 833 104.0 UT HSS 14.0 [4.3] 965 [439] 100376323 100376412
1170 975 88.1 UT HSS 14.0 [4.3] 965 [439] 100376324 100376414
1513 1260 67.7 UT HSS 14.0 [4.3] 965 [439] 100376325 100376417
1855 1546 55.1 UT HSS 14.0 [4.3] 965 [439] 100376326 100376418
914 762 124.0 S-GRB 13.4 [4.1] 989 [450] 100373157 100373036
1101 918 104.0 S-GRB 13.4 [4.1] 989 [450] 100373162 100373041
1291 1076 88.1 S-GRB 13.4 [4.1] 989 [450] 100373158 100373037
1480 1233 77.3 S-GRB 13.4 [4.1] 989 [450] 100373156 100373035
2424 2020 47.4 S-GRB 13.4 [4.1] 989 [450] 100373159 100373038
2803 2336 40.8 S-GRB 13.4 [4.1] 989 [450] 100373160 100373039
3370 2808 33.6 S-GRB 13.4 [4.1] 989 [450] 100373161 100373040
188.0 156.0
914 762 124.0 S 13.4 [4.1] 989 [450] 100374425 100374583
1101 918 104.0 S 13.4 [4.1] 989 [450] 100374432 100374588
1291 1076 88.1 S 13.4 [4.1] 989 [450] 100374426 100374584
1480 1233 77.3 S 13.4 [4.1] 989 [450] 100374424 100374582
2424 2020 47.4 S 13.4 [4.1] 989 [450] 100374428 100374585
2803 2336 40.8 S 13.4 [4.1] 989 [450] 100374429 100374586
3370 2808 33.6 S 13.4 [4.1] 989 [450] 100374430 100374587
† Gauge is an integral gauge.
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
914 762 124.0 S-Gauge† 15.0 [4.6] 1,029 [468] 100528846 100528962
1101 918 104.0 S-Gauge 15.0 [4.6] 1,029 [468] 100377290 100377366
1291 1076 88.1 S-Gauge 15.0 [4.6] 1,029 [468] 100528847 100528963
1480 1233 77.3 S-Gauge 15.0 [4.6] 1,029 [468] 100528845 100528961
2424 2020 47.4 S-Gauge 15.0 [4.6] 1,029 [468] 100528848 100528964
2803 2336 40.8 S-Gauge 15.0 [4.6] 1,029 [468] 100528849 100528965
3370 2808 33.6 S-Gauge 15.0 [4.6] 1,029 [468] 100528850 100528966
914 762 124.0 UT 13.6 [4.1] 999 [454] 100375583 100374861
1101 918 104.0 UT 13.6 [4.1] 999 [454] 100375588 100374869
1291 1076 88.1 UT 13.6 [4.1] 999 [454] 100375584 100374862
1480 1233 77.3 UT 13.6 [4.1] 999 [454] 100375582 100374860
2424 2020 47.4 UT 13.6 [4.1] 999 [454] 100375585 100374863
2803 2336 40.8 UT 13.6 [4.1] 999 [454] 100375586 100374864
188.0 156.0
3370 2808 33.6 UT 13.6 [4.1] 999 [454] 100375587 100374868
914 762 124.0 UT HSS 13.6 [4.1] 999 [454] 100376344 100376420
1101 918 104.0 UT HSS 13.6 [4.1] 999 [454] 100376349 100376427
1291 1076 88.1 UT HSS 13.6 [4.1] 999 [454] 100376345 100376421
1480 1233 77.3 UT HSS 13.6 [4.1] 999 [454] 100376343 100376419
2424 2020 47.4 UT HSS 13.6 [4.1] 999 [454] 100376346 100376422
2803 2336 40.8 UT HSS 13.6 [4.1] 999 [454] 100376347 100376423
3370 2808 33.6 UT HSS 13.6 [4.1] 999 [454] 100376348 100376426
1101 918 104.0 LT- Gauge† 14.5 [4.4] 1,019 [463] 100377366 100377290
1480 1233 77.3 LT- Gauge 14.5 [4.4] 1,019 [463] 100377357 100377283
2424 2020 47.4 LT- Gauge 14.5 [4.4] 1,019 [463] 100377358 100377284
2803 2336 40.8 LT- Gauge 14.5 [4.4] 1,019 [463] 100377359 100377285
3370 2808 33.6 LT- Gauge 14.5 [4.4] 1,019 [463] 100377360 100377286
† Gauge is an integral gauge.
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1428 1190 88.1 S-GRB 14.6 [4.5] 1,076 [489] 100373163 100373042
1847 1539 67.7 S-GRB 14.6 [4.5] 1,076 [489] 100373164 100373043
2264 1887 55.1 S-GRB 14.6 [4.5] 1,076 [489] 100373165 100373044
1428 1190 88.1 S 14.6 [4.5] 1,076 [489] 100374433 100374589
1847 1539 67.7 S 14.6 [4.5] 1,076 [489] 100374434 100374590
2264 1887 55.1 S 14.6 [4.5] 1,076 [489] 100374435 100374591
1428 1190 88.1 UT 14.7 [4.5] 1,086 [494] 100375589 100374870
206.0 1847 172.0 1539 67.7 UT 14.7 [4.5] 1,086 [494] 100375590 100374871
2264 1887 55.1 UT 14.7 [4.5] 1,086 [494] 100375591 100374872
1428 1190 88.1 UT HSS 14.7 [4.5] 1,086 [494] 100376351 100376428
1847 1539 67.7 UT HSS 14.7 [4.5] 1,086 [494] 100376353 100376429
2264 1887 55.1 UT HSS 14.7 [4.5] 1,086 [494] 100376361 100376430
1428 1190 88.1 LT-GRB 14.7 [4.5] 1,086 [494] 100376274 TBA
1847 1539 67.7 LT-GRB 14.7 [4.5] 1,086 [494] 100376275 TBA
2264 1887 55.1 LT-GRB 14.7 [4.5] 1,086 [494] 100376276 TBA
1096 914 124.0 S-GRB 15.5 [4.7] 1,141 [519] 100373166 100373045
1323 1102 104.0 S-GRB 15.5 [4.7] 1,141 [519] 100373167 100373046
1776 1480 77.3 S-GRB 15.5 [4.7] 1,141 [519] 100373168 100373047
2229 1858 61.1 S-GRB 15.5 [4.7] 1,141 [519] 100373169 100373048
1096 914 124.0 S 15.5 [4.7] 1,141 [519] 100374436 100374593
1323 1102 104.0 S 15.5 [4.7] 1,141 [519] 100374437 100374594
1776 1480 77.3 S 15.5 [4.7] 1,141 [519] 100374438 100374595
2229 1858 61.1 S 15.5 [4.7] 1,141 [519] 100374439 100374596
1096 914 124.0 UT 15.7 [4.8] 1,150 [523] 100375592 100374881
1323 1102 104.0 UT 15.7 [4.8] 1150 [523] 100375593 100374882
1776 1480 77.3 UT 15.7 [4.8] 1150 [523] 100375594 100374883
2229 1858 61.1 UT 15.7 [4.8] 1150 [523] 100375595 100374884
1096 914 124.0 UT-HSS 15.7 [4.8] 1150 [523] 100376362 100376431
225.0 1323 188.0 1102 104.0 UT-HSS 15.7 [4.8] 1150 [523] 100376363 100376435
1776 1480 77.3 UT-HSS 15.7 [4.8] 1150 [523] 100376364 100376436
2229 1858 61.1 UT-HSS 15.7 [4.8] 1150 [523] 100376365 100376437
1096 914 124.0 LT-GRB 15.3 [4.7] 1,141 [519] 100376277 100376164
1323 1102 104.0 LT-GRB 15.3 [4.7] 1,141 [519] 100388825 100376165
1776 1480 77.3 LT-GRB 15.3 [4.7] 1,141 [519] 100376279 100376166
2229 1858 61.1 LT-GRB 15.3 [4.7] 1,141 [519] 100376280 100376167
1323 1102 104.0 LT-Gauge† 16.6 [5.1] 1,171 [532] 100377394 100377295
1776 1480 77.3 LT-Gauge 16.6 [5.1] 1,171 [532] 100377396 100377296
2229 1858 61.1 LT-Gauge 16.6 [5.1] 1,171 [532] 100377398 100377297
1096 914 124.0 CT 15.4 [4.7] 1150 [523] 100388824 100376540
1323 1102 104.0 CT 15.4 [4.7] 1150 [523] 100388825 100388795
1096 914 124.0 CT-HSS 15.4 [4.7] 1150 [523] 100389271 100389299
1323 1102 104.0 CT-HSS 15.4 [4.7] 1150 [523] 100389272 100389300
† Gauge is an integral gauge.
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1279 1065 124.0 S-GRB 17.6 [5.4] 1,291 [587] 100373171 100373050
1544 1287 104.0 S-GRB 17.6 [5.4] 1,291 [587] 100373174 100373053
1808 1506 88.1 S-GRB 17.6 [5.4] 1,291 [587] 100373173 100373052
2601 2168 61.1 S-GRB 17.6 [5.4] 1,291 [587] 100373172 100373051
1279 1065 124.0 UT 17.8 [5.4] 1,302 [592] 100375596 100374885
1544 1287 104.0 UT 17.8 [5.4] 1,302 [592] 100375598 100374887
1808 1506 88.1 UT 17.8 [5.4] 1,302 [592] 100375597 100374886
1279 1065 124.0 UT-HSS 17.8 [5.4] 1,302 [592] 100376366 100376438
1544 1287 104.0 UT-HSS 17.8 [5.4] 1,302 [592] 100376368 100376440
263.0 219.0
1808 1506 88.1 UT-HSS 17.8 [5.4] 1,302 [592] 100376367 100376439
1279 1065 124.0 LT-GRB 17.4 [5.3] 1,291 [587] 100376282 100376168
1544 1287 104.0 LT-GRB 17.4 [5.3] 1,291 [587] 100376284 100461971
1808 1506 88.1 LT-GRB 17.4 [5.3] 1,291 [587] 100376283 100376169
1279 1065 124.0 LT-Gauge† 18.6 [5.7] 1,321 [600] 100377400 100377301
1544 1287 104.0 LT-Gauge 18.6 [5.7] 1,321 [600] 100377403 100377306
1808 1506 88.1 LT-Gauge 18.6 [5.7] 1,321 [600] 100377402 100377304
1279 1065 124.0 CT 17.5 [5.3] 1,302 [592] 100388826 100388796
1279 1065 124.0 CT-HSS 17.5 [5.3] 1,302 [592] 100389273 100389301
1461 1217 124.0 S-GRB 19.7 [6.0] 1,442 [655] 100373175 100373054
1763 1469 104.0 S-GRB 19.7 [6.0] 1,442 [655] 100373178 100373057
2368 1974 77.3 S-GRB 19.7 [6.0] 1,442 [655] 100373176 100373055
2671 2226 67.7 S-GRB 19.7 [6.0] 1,442 [655] 100373177 100373056
1461 1217 124.0 UT 19.9 [6.1] 1,454 [661] 100375599 100374889
1763 1469 104.0 UT 19.9 [6.1] 1,454 [661] 100375601 100374891
2368 1974 77.3 UT 19.9 [6.1] 1,454 [661] 100375600 100374890
1461 1217 124.0 UT-HSS 19.9 [6.1] 1,454 [661] 100376369 100376443
1763 1469 104.0 UT-HSS 19.9 [6.1] 1,454 [661] 100376376 100376445
300.0 250.0
2368 1974 77.3 UT-HSS 19.9 [6.1] 1,454 [661] 100376370 100376444
1131 942.5 158.0 LT-GRB 19.5 [5.9] 1,442 [655] tba‡ 100284177
1461 1217 124.0 LT-GRB 19.5 [5.9] 1,442 [655] 100376286 100376171
1763 1469 104.0 LT-GRB 19.5 [5.9] 1,442 [655] 100376289 100376173
1461 1217 124.0 LT-Gauge 20.7 [6.3] 1,472 [669] 100377404 100377307
1763 1469 104.0 LT-Gauge 20.7 [6.3] 1,472 [669] 100377407 100377311
2368 1974 77.3 LT-Gauge 20.7 [6.3] 1,472 [669] 100377405 100377308
1763 1469 104.0 CT 19.6 [6.0] 1,454 [661] 100388827 100388797
1763 1469 104.0 CT-HSS 19.6 [6.0] 1,454 [661] 100389274 100389302
† Gauge is an integral gauge.
‡ to be assigned
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1644 1370 124.0 S-GRB 21.8 [6.6] 1,594 [725] 100373179 100373058
1984 1653 104.0 S-GRB 21.8 [6.6] 1,594 [725] 100373180 100373059
2324 1937 88.1 S-GRB 21.8 [6.6] 1,594 [725] 100373181 100373060
2665 2220 77.3 S-GRB 21.8 [6.6] 1,594 [725] 100373182 100373061
1644 1370 124.0 UT 22.0 [6.7] 1,605 [730] 100375602 100374892
1984 1653 104.0 UT 22.0 [6.7] 1,605 [730] 100375603 100374893
2324 1937 88.1 UT 22.0 [6.7] 1,605 [730] 100375604 100374894
1644 1370 124.0 UT-HSS 22.0 [6.7] 1,605 [730] 100376377 100376446
338.0 1984 281.0 1653 104.0 UT-HSS 22.0 [6.7] 1,605 [730] 100376378 100376447
2324 1937 88.1 UT-HSS 22.0 [6.7] 1,605 [730] 100376379 100376448
1644 1370 124.0 LT-GRB 21.6 [6.6] 1,594 [725] 100376290 100376174
1984 1653 104.0 LT-GRB 21.6 [6.6] 1,594 [725] 100376291 100376175
2324 1937 88.1 LT-GRB 21.6 [6.6] 1,594 [725] 100376292 100376176
1644 1370 124.0 LT-Gauge† 22.8 [7.0] 1,624 [738] 100377408 100377312
1984 1653 104.0 LT-Gauge 22.8 [7.0] 1,624 [738] 100377409 100377313
1644 1370 124.0 CT 21.7 [6.6] 1,605 [730] 100388828 100388798
1644 1370 124.0 CT-HSS 21.7 [6.6] 1,605 [730] 100389275 100389303
1448 1207 157.0 S-GRB 23.9 [7.3] 1,745 [793] 100373183 100373062
1827 1522 124.0 S-GRB 23.9 [7.3] 1,745 [793] 100373184 100373063
2204 1837 104.0 S-GRB 23.9 [7.3] 1,745 [793] 100373185 100373064
2582 2152 88.1 S-GRB 23.9 [7.3] 1,745 [793] 100373186 100373065
1448 1207 157.0 UT 24.1 [7.3] 1,757 [799] 100375605 100374895
1827 1522 124.0 UT 24.1 [7.3] 1,757 [799] 100375607 100374896
2204 1837 104.0 UT 24.1 [7.3] 1,757 [799] 100375608 100374897
2582 2152 88.1 UT 24.1 [7.3] 1,757 [799] 100375609 100374898
1448 1207 157.0 UT-HSS 24.1 [7.3] 1,757 [799] 100376380 100376449
375.0 313.0
1827 1522 124.0 UT-HSS 24.1 [7.3] 1,757 [799] 100376381 100376454
2204 1837 104.0 UT-HSS 24.1 [7.3] 1,757 [799] 100376382 100376455
2582 2152 88.1 UT-HSS 24.1 [7.3] 1,757 [799] 100376383 100376456
1448 1207 157.0 LT-GRB 23.7 [7.2] 1,745 [793] 100376293 100376177
1827 1522 124.0 LT-GRB 23.7 [7.2] 1,745 [793] 100376294 100376178
2204 1837 104.0 LT-GRB 23.7 [7.2] 1,745 [793] 100376295 100376179
2582 2152 88.1 LT-GRB 23.7 [7.2] 1,745 [793] 100376296 100376193
1448 1207 157.0 CT 23.8 [7.3] 1,757 [799] 100388829 100388799
1448 1207 157.0 CT-HSS 23.8 [7.3] 1,757 [799] 100389276 100389304
† Gauge is an integral gauge.
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy*
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1594 1328 157.0 S-GRB 26.0 [7.9] 1,897 [862] 100373188 100373067
2009 1674 124.0 S-GRB 26.0 [7.9] 1,897 [862] 100373189 100373068
2841 2367 88.1 S-GRB 26.0 [7.9] 1,897 [862] 100373190 100373069
3672 3060 67.7 S-GRB 26.0 [7.9] 1,897 [862] 100373191 100373070
1594 1328 157.0 UT 26.1 [8.0] 1,908 [867] 100375610 100374899
2009 1674 124.0 UT 26.1 [8.0] 1,908 [867] 100375611 100374900
2841 2367 88.1 UT 26.1 [8.0] 1,908 [867] 100375614 100374901
3672 3060 67.7 UT 26.1 [8.0] 1,908 [867] 100375615 100374902
1594 1328 157.0 UT-HSS 26.1 [8.0] 1,908 [867] 100376384 100376457
413.0 344.0
2009 1674 124.0 UT-HSS 26.1 [8.0] 1,908 [867] 100376389 100376458
2841 2367 88.1 UT-HSS 26.1 [8.0] 1,908 [867] 100376390 100376459
3672 3060 67.7 UT-HSS 26.1 [8.0] 1,908 [867] 100376391 100376462
1594 1328 157.0 LT-GRB 25.8 [7.9] 1,897 [862] 100376297 100376194
2009 1674 124.0 LT-GRB 25.8 [7.9] 1,897 [862] 100376298 100376195
2841 2367 88.1 LT-GRB 25.8 [7.9] 1,897 [862] 100376299 100376196
3672 3060 67.7 LT-GRB 25.8 [7.9] 1,897 [862] 100376300 100376197
1594 1328 157.0 CT 25.9 [7.9] 1,908 [867] 100388830 100388800
1594 1328 157.0 CT-HSS 25.9 [7.9] 1,908 [867] 100389277 100389311
1738 1448 157.0 S-GRB 28.1 [8.6] 2,048 [931] 100373192 100373071
2192 1827 124.0 S-GRB 28.1 [8.6] 2,048 [931] 100373193 100373072
2646 2205 104.0 S-GRB 28.1 [8.6] 2,048 [931] 100373194 100291058
3552 2960 77.3 S-GRB 28.1 [8.6] 2,048 [931] 100373195 100373073
4005 3338 67.7 S-GRB 28.1 [8.6] 2,048 [931] 100373196 100373074
1738 1448 157.0 UT 28.2 [8.6] 2,060 [936] 100375616 100374903
2192 1827 124.0 UT 28.2 [8.6] 2,060 [936] 100375617 100374904
2646 2205 104.0 UT 28.2 [8.6] 2,060 [936] 100375618 100374905
1738 1448 157.0 UT-HSS 28.2 [8.6] 2,060 [936] 100376392 100376468
450.0 375.0
2192 1827 124.0 UT-HSS 28.2 [8.6] 2,060 [936] 100376393 100376469
2646 2205 104.0 UT-HSS 28.2 [8.6] 2,060 [936] 100376396 100376470
1738 1448 157.0 LT-GRB 27.9 [8.5] 2,048 [931] 100376301 100376198
2192 1827 124.0 LT-GRB 27.9 [8.5] 2,048 [931] 100376307 100376199
2646 2205 104.0 LT-GRB 27.9 [8.5] 2,048 [931] 100376308 100376200
1738 1448 157.0 CT 28.0 [8.5] 2,060 [936] 100388831 100388801
2192 1827 124.0 CT 28.0 [8.5] 2,060 [936] 100388832 100388802
1738 1448 157.0 CT-HSS 28.0 [8.5] 2,060 [936] 100389278 100389305
2192 1827 124.0 CT-HSS 28.0 [8.5] 2,060 [936] 100389279 100389306
Frequency, 60 Hz Frequency, 50 Hz
Power Power Length, Weight, Carbon Steel Redalloy
Rating, hp Voltage, V Rating, hp Voltage, V Current, A Type ft [m] lbm [kg] Part Number Part Number
1884 1570 157.0 S-GRB 30.2 [9.2] 2,200 [1,000] 100373197 100373075
2375 1979 124.0 S-GRB 30.2 [9.2] 2,200 [1,000] 100373198 100373076
2865 2387 104.0 S-GRB 30.2 [9.2] 2,200 [1,000] 100373199 100373077
3847 3206 77.3 S-GRB 30.2 [9.2] 2,200 [1,000] 100373200 100373078
1884 1570 157.0 UT 30.3 [9.2] 2,250 [1,023] 100375622 100374907
2375 1979 124.0 UT 30.3 [9.2] 2,250 [1,023] 100375623 100374908
1884 1570 157.0 UT-HSS 30.3 [9.2] 2,250 [1,023] 100376398 100376471
488.0 406.0
2375 1979 124.0 UT-HSS 30.3 [9.2] 2,250 [1,023] 100376399 100376472
1884 1570 157.0 LT-GRB 30.0 [9.1] 2,200 [1,000] 100376309 100376201
2375 1979 124.0 LT-GRB 30.0 [9.1] 2,200 [1,000] 100376310 100376202
1884 1570 157.0 CT 30.1 [9.2] 2,250 [1,023] 100388833 100388803
2375 1979 124.0 CT 30.1 [9.2] 2,250 [1,023] 100388834 100388804
1884 1570 157.0 CT-HSS 30.1 [9.2] 2,250 [1,023] 100389280 100389307
2375 1979 124.0 CT-HSS 30.1 [9.2] 2,250 [1,023] 100389281 100389308
2028 1690 157.0 S-GRB 32.3 [9.8] 2,351 [1,069] 100373201 100373079
2557 2131 124.0 S-GRB 32.3 [9.8] 2,351 [1,069] 100373202 100373080
3086 2572 104.0 S-GRB 32.3 [9.8] 2,351 [1,069] 100373203 100373081
3615 3013 88.1 S-GRB 32.3 [9.8] 2,351 [1,069] 100373204 100373082
4144 3454 77.3 S-GRB 32.3 [9.8] 2,351 [1,069] 100373205 100373083
2028 1690 157.0 UT 32.4 [9.9] 2,363 [1,074] 100375625 100374909
525.0 2557 438.0 2131 124.0 UT 32.4 [9.9] 2,363 [1,074] 100375626 100374910
2028 1690 157.0 UT-HSS 32.4 [9.9] 2,363 [1,074] 100373201 100373079
2557 2131 124.0 UT-HSS 32.4 [9.9] 2,363 [1,074] 100373202 100373080
2028 1690 157.0 LT-GRB 32.1 [9.8] 2,351 [1,069] 100376311 100376204
2557 2131 124.0 LT-GRB 32.1 [9.8] 2,351 [1,069] 100376312 100376205
2028 1690 157.0 CT 32.1 [9.8] 2,351 [1,069] 100388835 100388805
2028 1690 157.0 CT-HSS 32.1 [9.8] 2,351 [1,069] 100389282 100389309
2173 1811 157.0 S-GRB 34.4 [10.5] 2,503 [1,138] 100373206 100373084
2740 2284 124.0 S-GRB 34.4 [10.5] 2,503 [1,138] 100373207 100373085
3306 2755 104.0 S-GRB 34.4 [10.5] 2,503 [1,138] 100373208 100373086
3873 3228 88.1 S-GRB 34.4 [10.5] 2,503 [1,138] 100373209 100373087
563.0 2173 469.0 1811 157.0 UT 34.5 [10.5] 2,540 [1,155] 100375627 100374911
2740 2284 124.0 UT 34.5 [10.5] 2,540 [1,155] 100375628 100374914
2173 1811 157.0 UT-HSS 34.5 [10.5] 2,540 [1,155] 100376402 100376475
2740 2284 124.0 UT-HSS 34.5 [10.5] 2,540 [1,155] 100376403 100376476
2173 1811 157.0 LT-GRB 34.2 [10.4] 2,503 [1,138] 100376313 100284309
Operational efficiency
Features
Operational and equipment problems,
■ Factory prefilled and preshimmed such as ESP failure within the first 90
system days of operation, can require substan-
■ Integrated protector assembly tial troubleshooting efforts and non-
■ Direct connect motor pothead productive time. By reducing the
■ Integrated Phoenix* real-time installation complexity, the ProMotor
pressure and temperature sensor unit improves REDA Maximus ESP
system reliability and performance
through simplified wellsite assembly.
Integrated ESP systems The ease of installation also helps save
costly rig time during installation.
REDA* Maximus* ESP systems are the
The integrated Phoenix sensor pro-
next evolution in the continuous inno-
vides continuous equipment perform-
vation and improvement of REDA ESP
ance measurements to help operators
technology. These next-generation
anticipate production problems. They
ESP systems deliver improved relia-
can also apply petroleum engineering
bility and performance through the
analysis to better understand the
use of integrated components with
well’s production potential.
fewer mechanical connections. This
Combined with the Schlumberger
field friendly system reduces early-life
espWatcher* surveillance and control
failures and extends ESP run life. A
system, operators can proactively
key component in the improved
enhance their ESP operations to
Maximus ESP system is the newly
improve production and equipment
developed ProMotor unit.
run life.
REDA* Maximus* ProMotor* BSL Type, 387/456, Integral Pressure Sensor, RSPD Type
Frequency, 60 Hz Frequency, 50 Hz
Length, Weight, Carbon Steel
Horsepower, hp Volts, V Horsepower, hp Volts, V Amperage, A Type ft [m] lbm [kg] Part Number
483 402 41.8 100175137
30 25 12.1 [3.7] 395 [180]
750 625 26.9 100175163
603 502 41.9 100175177
38 31 13.0 [4.0] 435 [198]
937 781 26.9 100175189
457 380 66.4 100175200
45 858 38 715 35.3 13.7 [4.2] 470 [214] 100175203
991 826 30.6 100175211
689 574 51.3 100176375
768 640 46.0 100175341
53 44 14.6 [4.5] 500 [227]
1,000 833 35.3 100175260
1,156 963 30.6 100175336
787 655 51.4 100175360
965 804 41.9 100178610
60 50 15.3 [4.7] 545 [248]
1,143 952 35.3 100175366
1,499 1,249 26.9 100178609
886 738 51.3 100175378
68 56 16.2 [4.9] 575 [261]
1,286 1,072 35.3 BSL-S 100175386
983 820 51.3 100175398
1,207 1,006 41.8 100175400
75 63 16.9 [5.2] 610 [227]
1,540 1,283 32.8 100178615
1,874 1,562 26.9 100176384
837 698 66.3 100175404
960 800 57.8 100175768
83 69 17.8 [5.4] 650 [295]
1,327 1,106 41.9 100175756
2,063 1,719 26.9 100175764
913 761 66.4 100175770
1,581 1,317 38.3 100178618
90 75 18.5 [5.6] 690 [314]
1,982 1,652 30.6 100175909
2,248 1,874 26.9 100175884
990 825 66.3 100175913
1,279 1,066 51.3 100175918
98 81 19.4 [5.9] 725 [330]
1,859 1,549 35.3 100176024
2,148 1,790 30.6 100176017
REDA Maximus ProMotor BSL Type, 387/456, Integral Pressure Sensor, RSPD Type
Frequency, 60 Hz Frequency, 50 Hz
Length, Weight, Carbon Steel
Horsepower, hp Volts, V Horsepower, hp Volts, V Amperage, A Type ft [m] lbm [kg] Part Number
1,104 920 77.7 100176115
1,295 1,079 66.3 100176117
128 106 22.6 [875] 875 [398]
1,484 1,237 57.8 100176121
2,242 1,868 38.3 100176123
1,169 974 77.7 100176126
1,570 1,308 57.9 100178645
135 113 23.3 [7.1] 920 [418]
2,170 1,809 41.9 100176130
2,772 2,310 32.8 100178646
1,870 1,558 51.3 100176145
143 2,294 119 1,911 41.8 24.2 [7.4] 960 [436] 100176156
2,506 2,088 38.3 100176165
1,299 1,083 77.7 100178650
1,745 1,454 57.9 BSL-S 100178652
150 125 24.9 [7.6] 995 [452]
1,967 1,639 51.3 100176173
2,413 2,011 41.8 100176171
2,066 1,722 51.3 100176176
158 131 25.8 [7.9] 1,030 [468]
2,300 1,917 46.1 100176177
1,429 1,191 77.7 100176433
1,918 1,599 57.9 100176179
165 138 26.6 [8.1] 1,070 [486]
2,164 1,803 51.3 100176182
2,899 2,415 38.3 100178655
1,559 1,299 77.7 100178665
180 2,360 150 1,966 51.4 28.2 [8.6] 1,145 [520] 100178666
2,628 2,190 46.1 100178667
210 2,446 175 2,039 57.8 31.4 [9.6] 1,310 [595] 100149542
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy*
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
1,689 1,407 77.7 tba† 100203451
195 163 30.7 [9.4] 1,260 [573]
2,847 2,372 46.1 tba 100203452
2,446 2,039 57.8 tba 100203455
210 175 BPBSL-S 32.3 [9.8] 1,335 [607]
2,753 2,294 51.3 tba 100203454
1,948 1,623 77.8 100201348 tba
225 188 35.2 [10.7] 1,410 [641]
2,950 2,459 51.3 100201347 tba
†
to be assigned
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
1,040 866 77.7 100179093 100213488
1,573 1,311 51.4 100210573 100213489
120 100 22.8 [7.0] 875 [398]
2,286 1,905 35.3 100210575 100213491
2,642 2,202 30.6 100210574 100213490
1,169 974 77.7 100179080 100213492
1,370 1,141 66.4 100210578 100213496
135 113 24.4 [7.4] 960 [436]
1,570 1,308 57.9 100210576 100213494
2,170 1,809 41.9 100210581 100213497
1,299 1,083 77.7 100179076 100213498
1,745 1,454 57.9 100210539 100213500
150 125 26.0 [7.9] 1,035 [470]
1,967 1,639 51.3 100210544 100213502
2,413 2,011 41.8 100210543 100213501
1,184 987 93.7 BPBSL-UT 100136075 100213507
1,429 1,191 77.7 100131666 100213503
165 1,918 138 1,599 57.9 27.7 [8.4] 1,110 [505] 100210549 100213505
2,164 1,803 51.3 100210550 100213506
2,899 2,415 38.3 100210547 100213504
1,559 1,299 77.7 100179054 100213508
180 150 29.3 [8.9] 1,185 [539]
2,360 1,966 51.4 100210554 100213510
1,689 1,407 77.7 100125484 100213513
195 163 30.9 [9.4] 1,260 [573]
2,847 2,372 46.1 100210566 100213514
2,446 2,039 57.8 100210569 100213516
210 175 32.5 [9.9] 1,335 [607]
2,753 2,294 51.3 100210568 100213515
1,948 1,623 77.8 100099091 100213519
225 188 34.1 [10.4] 1,410 [641]
2,950 2,459 51.3 100210572 100213574
REDA Maximus ProMotor LSBPB Type, 387/456, Upper Tandem, RSPD Type
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
1,040 866 77.7 100234693 100235365
1,573 1,311 51.4 100234946 100235366
120 100 22.8 [7.0] 875 [398]
2,286 1,905 35.3 100234948 100235369
2,642 2,202 30.6 100234947 100235367
1,169 974 77.7 100234949 100235370
1,370 1,141 66.4 100234953 100235374
135 1,570 113 1,308 57.9 LSBPB-UT 24.4 [7.4] 960 [436] 100234951 100235371
2,170 1,809 41.9 100234954 100235375
2,772 2,310 32.8 100234952 100235373
1,299 1,083 77.7 100234955 100235388
1,745 1,454 57.9 100234956 100235389
150 125 26.0 [7.9] 1,035 [470]
1,967 1,639 51.3 100234959 100235396
2,413 2,011 41.8 100234957 100235390
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy*
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
1,184 987 93.7 100235026 100235406
1,429 1,191 77.7 100234961 100235397
165 1,918 138 1,599 57.9 27.7 [8.4] 1,110 [505] 100234963 100235404
2,164 1,803 51.3 100235025 100235405
2,899 2,415 38.3 100234962 100235398
1,559 1,299 77.7 100235031 100235414
180 2,360 150 1,966 51.4 29.3 [8.9] 1,185 [539] 100235027 100235415
LSBPB-UT
2,628 2,190 46.1 100235028 100235416
1,689 1,407 77.7 100235032 100235434
195 163 30.9 [9.4] 1,260 [573]
2,847 2,372 46.1 100235033 100235435
2,446 2,039 57.8 100235035 100235439
210 175 32.5 [9.9] 1,335 [607]
2,753 2,294 51.3 100235034 100235436
1,948 1,623 77.8 100235037 100235442
225 188 34.1 [10.4] 1,410 [641]
2,950 2,459 51.3 100235036 100235441
REDA Maximus Motor, 387/456, Lower Tandem, Integral Sensor, RSPD Type
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
1,040 866 77.7 100179204 100213138
1,573 1,311 51.4 100211930 100213139
120 100 16.4 [5.0] 715 [325]
2,286 1,905 35.3 100211932 100213141
2,642 2,202 30.6 100211931 100213140
1,169 974 77.7 100130554 100213143
1,370 1,141 66.4 100211936 100213145
135 1,570 113 1,308 57.9 18.0 [5.5] 800 [364] 100211934 100213142
2,170 1,809 41.9 100211937 100213146
2,772 2,310 32.8 100211935 100213144
1,299 1,083 77.7 100179203 100213147
1,745 1,454 57.9 100211938 100213148
150 125 19.6 [6.0] 875 [398]
1,967 1,639 51.3 100211941 100213150
2,413 2,011 41.8 LT 100211940 100213149
1,184 987 93.7 100136074 100213155
1,429 1,191 77.7 100130567 100213151
165 1,918 138 1,599 57.9 21.2 [6.5] 950 [432] 100211946 100213153
2,164 1,803 51.3 100211947 100213154
2,899 2,415 38.3 100211944 100213152
1,559 1,299 77.7 100179202 100213156
180 2,360 150 1,966 51.4 22.8 [7.0] 1,025 [466] 100211948 100213157
2,628 2,190 46.1 100211949 100213158
1,689 1,407 77.7 100125479 100213159
195 163 24.4 [7.4] 1,100 [500]
2,847 2,372 46.1 100211952 100213160
210 2,753 175 2,294 51.3 26.0 [7.9] 1,175 [534] 100211953 100213161
225 1,948 188 1,623 77.8 27.6 [8.4] 1,250 [568] 100098877 100213163
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
1,040 866 77.7 100196418 100213556
1,573 1,311 51.4 100212430 100213557
120 100 15.0 [4.6] 700 [318]
2,286 1,905 35.3 100212432 100213559
2,642 2,202 30.6 100212431 100213558
1,169 974 77.7 100196420 100213560
1,370 1,370 66.4 100212435 100213563
135 1,570 113 1,570 57.9 16.7 [5.1] 785 [357] 100212433 100213561
2,170 2,170 41.9 100212436 100213564
2,772 2,772 32.8 100212434 100213562
1,299 1,083 77.7 100196424 100213565
1,745 1,745 57.9 100212437 100213567
150 125 18.3 [5.6] 860 [391]
1,967 1,967 51.3 100212439 100213569
2,413 2,413 41.8 100212438 100213568
LT
1,184 987 93.7 100196428 100213580
1,429 1,191 77.7 100196426 100213570
165 1,918 138 1,599 57.9 19.9 [6.1] 935 [425] 100212443 100213578
2,164 1,803 51.3 100212444 100213579
2,899 2,415 38.3 100212441 100213571
1,559 1,299 77.7 100196432 100213581
180 2,360 150 1,966 51.4 21.5 [6.6] 1,010 [459] 100212445 100213582
2,628 2,190 46.1 100212446 100213586
1,689 1,407 77.7 100196435 100213587
195 163 23.1 [7.0] 1,085 [493]
2,847 2,372 46.1 100212447 100213588
210 2,753 175 2,294 51.3 24.7 [7.5] 1,160 [527] 100212451 100213589
1,948 1,623 77.8 100196438 100213592
225 188 26.3 [8.0] 1,235 [561]
2,950 2,459 51.3 100212452 100213591
REDA Maximus ProMotor BSL Type, 562 Series, Integral Pressure Sensor, RSPD Type
Frequency, 60 Hz Frequency, 50 Hz
Length, Weight, Carbon Steel
Horsepower, hp Volts, V Horsepower, hp Volts, V Amperage, A Type ft [m] lbm [kg] Part Number
506 422 47.3 100237437
38 822 31 685 29.1 12.0 [3.7] 691 [314] 100237414
1,295 1,079 18.5 100229858
473 394 75.9 100237448
655 545 54.8 100237444
56 47 13.2 [4.0] 779 [354]
774 645 46.3 100237440
1,257 1,048 28.5 100229859
BSL-S
539 449 88.8 100237446
75 934 63 778 51.2 14.1 [4.3] 843 [383] 100237442
1,328 1,106 36.0 100229860
682 568 87.7 100237459
882 735 67.8 100237456
94 78 15.3 [4.7] 930 [423]
1,081 901 55.3 100237453
1,381 1,150 43.3 100229861
REDA Maximus ProMotor BPBSL Type, 562 Series, Integral Pressure Sensor, RSPD Type
Frequency, 60 Hz Frequency, 50 Hz
Length, Weight, Carbon Steel
Horsepower, hp Volts, V Horsepower, hp Volts, V Amperage, A Type ft [m] lbm [kg] Part Number
1,150 958 104.1 100237430
1,544 1,287 77.5 100223326
188 2,530 156 2,108 47.3 22.9 [7.0] 1,217 [553] 100237425
2,925 2,437 40.9 100237427
3,517 2,931 34.0 100237428
1,491 1,242 88.3 100237431
206 1,927 172 1,606 68.3 24.0 [7.3] 1,427 [649] 100237432
2,363 1,969 55.7 100237433
1,381 1,150 104.0 100237434
1,854 1,545 77.5 100237435
225 188 BPBSL-S 24.9 [7.6] 1,491 [678]
2,327 1,939 61.7 100237436
2,800 2,333 51.3 100237438
1,334 1,112 125.5 100237439
1,612 1,343 103.9 100237445
263 219 27.0 [8.2] 1,634 [743]
1,887 1,572 88.8 100237443
2,715 2,262 61.7 100237441
1,525 1,271 125.5 100237447
1,840 1,534 104.0 100237451
300 250 29.1 [8.9] 1,776 [807]
2,472 2,060 77.4 100237449
2,787 2,323 68.7 100237450
REDA Maximus ProMotor BPBSL Upper Tandem Type, 562 Series, RSPD Type
Frequency, 60 Hz Frequency, 50 Hz
Length, Weight, Carbon Steel
Horsepower, hp Volts, V Horsepower, hp Volts, V Amperage, A Type ft [m] lbm [kg] Part Number
1,150 958 104.1 100236659
1,544 1,287 77.5 100236655
188 2,530 156 2,108 47.3 22.9 [7.0] 1,217 [553] 100236656
2,925 2,437 40.9 100236657
3,517 2,931 34.0 100236658
1,381 1,150 104.0 100236660
1,854 1,545 77.5 100236661
225 188 24.9 [7.6] 1,491 [678]
2,327 1,939 61.7 100236662
2,800 2,333 51.3 100236663
1,334 1,112 125.5 100236664
BPBSL-UT
1,612 1,343 103.9 100145975
263 219 27.0 [8.2] 1,634 [743]
1,887 1,572 88.8 100147598
2,715 2,262 61.7 100236665
1,525 1,271 125.5 100236666
1,840 1,534 104.0 100236669
300 250 29.1 [8.9] 1,776 [807]
2,472 2,060 77.4 100236667
2,787 2,323 68.7 100236668
1,716 1,430 125.5 100119228
338 2,070 281 1,725 104.0 31.2 [9.5] 1,919 [872] 100236670
2,781 2,317 77.4 100236671
REDA Maximus Motor, 562 Series, LT with Integral Pressure Sensor, RSPD Type
Frequency, 60 Hz Frequency, 50 Hz
Length, Weight, Carbon Steel
Horsepower, hp Volts, V Horsepower, hp Volts, V Amperage, A Type ft [m] lbm [kg] Part Number
113 1,045 94 871 68.4 10.4 [3.2] 686 [312] 100116432
1,150 958 104.1 100233787
1,544 1,287 77.5 100233767
LT
188 2,530 156 2,108 47.3 14.5 [4.4] 989 [450] 100233771
2,925 2,437 40.9 100233773
3,517 2,931 34.0 100233775
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy*
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
463 386 42.3 100360577 100360589
30 25 11.0 [3.4] 395
719 599 27.2 100361628 100361859
578 482 42.5 100361630 100361860
38 31 11.9 [3.6] 435
899 749 27.3 100361632 100361861
438 365 67.1 100361634 100361862
45 823 38 686 35.7 12.6 [3.8] 470 100361635 100361863
950 792 30.9 100361636 100361864
660 550 52.0 100361638 100361865
736 614 46.7 100361642 100361868
53 44 13.5 [4.1] 500
959 799 35.8 100361639 100361866
1,109 924 31.0 100361641 100361867
754 628 52.1 100361644 100361869
925 771 42.3 100361649 100361872
60 50 14.2 [4.3] 545
1,096 913 35.7 100361645 100361870
BSL-S
1,438 1,198 27.2 100361647 100361871
849 708 52.0 100361651 100361873
68 56 15.1 [4.6] 575
1,233 1,027 35.8 100361652 100361874
943 786 52.0 100361655 100361876
1,157 964 42.3 100361657 100361877
75 63 15.8 [4.8] 610
1,477 1,231 33.3 100361653 100361875
1,797 1498 27.3 100361658 100361878
803 669 67.3 100361659 100361879
921 767 58.7 100361663 100361882
83 69 16.7 [5.1] 650
1,272 1,060 42.5 100361661 100361880
1,978 1,648 27.3 100361662 100361881
1,516 1,263 38.7 100361666 100361885
90 1,901 75 1,584 31.0 17.4 [5.3] 690 100361670 100361887
2,156 1,797 27.2 100361669 100361886
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
949 791 67.3 100361671 100361888
1,227 1,022 52.0 100361672 100361889
98 81 18.3 [5.6] 725
1,782 1,485 35.8 100361676 100361891
2,060 1,717 31.0 100361674 100361890
1,021 851 67.1 100361677 100361893
1,470 1,225 46.6 BSL-S 100361679 100361894
105 88 19.0 [5.8] 760
2,067 1,723 33.3 100361681 100361896
2,217 1,848 30.9 100361680 100361895
935 779 78.9 100361683 100361897
113 1,415 94 1,180 52.0 19.9 [6.1] 790 100361688 100361898
2,057 1,714 35.8 100361689 100361899
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel Redalloy
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
997 831 78.6 100361690 100361900
1,508 1,257 52.0 100361692 100361901
120 100 20.6 [6.3] 835 [380]
2,192 1,826 35.8 100361694 100361903
2,533 2,111 30.9 100361693 100361902
1,059 882 78.9 100361695 100361904
1,241 1,035 67.3 100361696 100361905
128 106 21.5 [6.6] 875 [398]
1,423 1,186 58.7 100361698 100361906
2,150 1,791 38.8 100361699 100361907
1,121 934 78.9 100361701 100361908
1,505 1,254 58.7 100361702 100361909
135 113 22.2 [6.8] 920 [418]
2,081 1,734 42.5 100361706 100361910
2,658 2,215 33.3 100361703 100361912
1,184 987 78.8 100361713 100361916
1,793 1,494 52.0 100361707 100361913
143 119 23.1 [7.0] 960 [436]
2,199 1,833 42.5 BSL-S 100361709 100361914
2,403 2,002 38.8 100361711 100361915
1,246 1,038 78.6 100361714 100361917
1,673 1,394 58.7 100361715 100361918
150 125 23.8 [7.3] 995 [452]
1,886 1,572 52.1 100361717 100361920
2,314 1,928 42.3 100361716 100361919
158 1,981 131 1,651 52.0 100361718 100361921
24.7 [7.5] 1,030 [468]
2,205 1,838 46.8 100361719 100361922
1,370 1,142 78.6 100361720 100361923
1,070 [486]
1,839 1,533 58.8 100361728 100361925
165 138 25.4 [7.7] 1,070 [486]
2,075 1,729 52.1 100361729 100361926
1,070 [486]
2,779 2,316 38.7 100361725 100361924
1,495 1,245 78.9 100361731 100361927
180 2,262 150 1,885 52.0 27.0 [8.2] 1,145 [520] 100361732 100361928
2,520 2,100 46.6 100361733 100361929
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel (M-Trim) Redalloy* (M-Trim)
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
1,619 1,349 78.6 100361948 100361954
195 162.5 30.9 [9.4] 1,260 [573]
2,730 2,275 46.6 100361949 100361955
2,346 1,955 58.7 100361951 100361957
210 175 BPBSL-S 32.5 [9.9] 1,335 [607]
2,640 2,200 52.0 100361950 100361956
1,868 1,557 78.9 100361953 100361959
225 188 34.1 [10.4] 1,410 [641]
2,829 2,357 52.0 100361952 100361958
REDA Maximus ProMotor BPBSL Type, 456 Series, Upper Tandem, MaxJoint Technology
Frequency, 60 Hz Frequency, 50 Hz
Length, Weight, Carbon Steel
Horsepower, hp Volts, V Horsepower, hp Volts, V Amperage, A Type ft [m] lbm [kg] Part Number
997 831 78.6 100351312
1,508 1,257 52.0 100351313
120 100 23.0 [7.0] 875 [398]
2,192 1,826 35.8 100351315
2,533 2,111 30.9 100351314
1,121 934 78.9 100351316
1,313 1,094 67.4 100351319
135 1,505 113 1,254 58.7 24.6 [7.5] 960 [436] 100351317
2,081 1,734 42.5 100351320
2,658 2,215 33.3 100351318
BPBSL-UT
1,246 1,038 78.6 100351321
1,673 1,394 58.7 100351322
150 125 26.2 [8.0] 1,035 [470]
1,886 1,572 52.1 100351324
2,314 1,928 42.3 100351323
1,370 1,142 78.6 100351325
1,839 1,533 58.8 100351327
165 2,075 138 1,729 52.1 27.8 [8.5] 1,110 [505] 100351328
2,075 1,729 93.7 100351329
2,779 2,316 38.7 100351326
REDA Maximus ProMotor BPBSL Type, 456 Series, Upper Tandem, MaxJoint Technology
Frequency, 60 Hz Frequency, 50 Hz
Horsepower, Horsepower, Amperage, Length, Weight, Carbon Steel (M-Trim) Redalloy (M-Trim)
hp Volts, V hp Volts, V A Type ft [m] lbm [kg] Part Number Part Number
997 831 78.6 100362331 100351342
1,508 1,257 52.0 100362332 100351343
120 100 23.0 [7.0] 875 [398]
2,192 1,826 35.8 100362334 100351345
2,533 2,111 30.9 100362333 100351344
1,121 934 78.9 100351339 100351346
1,313 1,094 67.4 100362337 100351349
135 1,505 113 1,254 58.7 24.6 [7.5] 960 [436] 100362335 100351347
2,081 1,734 42.5 100362338 100351350
2,658 2,215 33.3 100362336 100351348
1,246 1,038 78.6 100362339 100351351
1,673 1,394 58.7 BPBSL-UT 100362340 100351352
150 125 26.2 [8.0] 1,035 [470]
1,886 1,572 52.1 100362342 100351354
2,314 1,928 42.3 100362341 100351353
1,370 1,142 78.6 100362343 100351355
1,839 1,533 58.8 100362345 100351357
165 2,075 138 1,729 52.1 27.8 [8.5] 1,110 [505] 100362346 100351358
2,075 1,729 93.7 100362347 100351359
2,779 2,316 38.7 100362344 100351356
1,495 1,245 78.9 100362348 100351360
180 2,262 150 1,885 52.0 29.4 [9.0] 1,185 [539] 100362349 100351361
2,520 2,100 46.6 100362350 100351362
Nomenclature Definitions
Type Description
66L Two-chambered labyrinth design
SB Positive seal protector using a single elastomeric bag
DB Positive seal protector with two elastomeric bags connected in parallel
PF Prefilled protector
HL High-load thrust bearing
HSS Indicates the use of high-strength shaft
HTM Indicates the use of high-temperature materials in the protector
Insulation
PPE Polypropylene/ethylene
P Polypropylene/ethylene
E Ethylene propylene diene (EPDM)
K Polyimide tape
T Semiconductive tape
Barrier
TB Proprietary high-temperature tape with braid
L Lead
Jacket
PE High-density polyethylene (HDPE)
O Nitrile
E Ethylene propylene diene (EPDM)
PPE Polypropylene/ethylene
P Polypropylene/ethylene
Applications Description
n Electric submersible pumps The RedaMAX* 180 unarmored ESP
(ESPs) in power cable is designed primarily for
• High-water-cut oil wells water well applications or low-oil-cut oil
wells with low bottomhole pressures.
• Water wells
• Low bottomhole pressures The cable jacket is made from a
proprietary HDPE compound with
• Shallow wells excellent flexibility and toughness. A
polypropylene copolymer insulation
offers resistance to damage and chemi-
Benefits
cal attack. This elastomer has proved
n Longer life of ESP system to be highly effective in low-tempera-
n Lower maintenance cost ture water wells with low bottomhole
pressures.
Features The conductors are made of alloy-
coated copper to protect against corro-
n Alloy-coated copper conductors for sion and improve long-term electrical
corrosion protection properties of the insulation. Maximum
n High-density polyethylene (HDPE) conductor temperature is 82 degC
compound jacket with improved [180 degF].
flexibility and toughness to resist
mechanical damage and chemical
attack
AWG
AWG
WG
WG
WG
WG
50 500
AWG
AWG
WG
WG
WG
WG
Applications Description
n Electric submersible pumps RedaMAX* 250 armored ESP power
(ESPs) in cables incorporate proprietary polypro-
• Low- and medium-temperature pylene insulation over the alloy-coated
oil wells copper conductor design. These cables
are highly durable and offer excellent
• Low to moderate gas
long-term performance, providing an
content
economic choice for the life of the well.
• Low to moderate corrosives The polypropylene construction is
intended for use in medium-temperature,
nonaggressive wells. It has polypropylene
Benefits insulation and a polypropylene jacket
n Long ESP system life on each conductor. The cable has an
n Low life cycle costs exterior metal armor wrap that provides
protection from mechanical damage.
The polypropylene tape-and-
Features braid construction is intended for
n Polypropylene copolymer insula- use in medium-temperature, mildly
tion for long-term performance aggressive wells and uses the same
n Optional fluorocarbon tape barrier polypropylene insulation with a fluoropo-
or extruded barrier to protect the lymer tape barrier and braid. The tape
insulation from chemical attack barrier provides a mechanical barrier
and gas decompression to more aggressive well fluids, as well
as adding mechanical hoop strength to
n Alloy-coated copper conductors for protect against explosive decompres-
corrosion protection sion in gassy environments.
n Tough, high-oil-resistance nitrile The cables use a polypropylene
rubber jacket to resist mechanical insulation and an oil-resistant nitrile
damage and chemical attack jacket and are intended for wells with
n Galvanized coated steel, heavy lower levels of gas. The nitrile offers
galvanized coated steel, stainless higher temperature rating and resis-
steel, or Monel® armor to pro- tance to mechanical damage.
tect against gas, corrosion, and Several common cable designs in
mechanical damage the RedaMAX 250 family are shown.
Maximum conductor temperature is up
to 121 degC [250 degF], depending on
cable option selected.
Maximum con
100
50
0
100 120 140 160 180 200 220
Maximum well
Maximum well temperature,
temperature, degF
degF
RedaMAX 250 Round (PPEO) RedaMAX 250 Flat (PP250) RedaMAX 250 Flat (POTB-250)
350 300 300
Applications Description
n Electric submersible pumps The RedaMAX* 400 family of power
(ESPs) in cables for ESPs uses patented EPDM
• Moderately gassy wells insulation and jackets. The new EPDM
formulation offers excellent electrical
• High-temperature applications
and physical properties such as tear
resistance, increased tensile strength,
Benefits and increased elasticity. These materi-
als are selected to provide superior life
n Longer ESP system life in high-temperature environments and
n Lower life cycle cost when moderate levels of gas are present.
n Long insulation life RedaMAX 400 cable design varia-
tions provide a mechanical barrier that
protects the insulation from well flu-
Features ids. The barrier also provides mechani-
n High maximum conductor tem- cal hoop strength, helping to mitigate
perature of 204 degC [400 degF] the risk of explosive decompression in
n Alloy-coated copper conductors to gassy environments. These cables have
protect against corrosion proved to be reusable and contribute to
lower system costs.
n Adhesive layer between conduc- Several common cable designs in the
tor and ethylene propylene diene family are shown. Many other designs
(EPDM) to prevent gas migration are available depending on the options
and eliminate damage caused by selected.
gas ingress
n EPDM insulation and jacket that
offer long-term insulation electri-
cal properties
n Fluorocarbon tape barrier or
extruded barrier to protect the
insulation from chemical attack
and gas decompression
n Galvanized-coated steel, heavy
galvanized-coated steel, stainless
steel, and Monel® cable armor
Maxi
50
Maxi
0 0
100 150 200 250 300 350 400 450 100 150 200 250 300 350 400 450 500
Maximum well temperature, degF Maximum well temperature, degF
RedaMAX 400 Round (ETBE and EE) RedaMAX Hotline MLE (PEEKLB)
450 400
1/0 AWG
350 1/0 AWG
350 1 AWG 300 1 AWG
2 AWG
300 2 AWG
4 AWG 250 4 AWG
250 6 AWG
6 AWG
200
200
150 150
100 100
50 50
0 0
100 150 200 250 300 350 400 450 0 50 100 150 200 250 300 350 400 450 500
Maximum well temperature, degF Maximum well temperature, degF
Applications Description
n Electric submersible pumps All cable designs in the Redalead*
(ESPs) in family of electrical insulated cables
• High levels of gas, including have advanced EPDM insulation as
H2S and CO2 well as an impervious lead barrier.
This new EPDM insulation is based
• High temperatures
on our experience in rubber formula-
• High pressures tion and mixing for the oil industry.
• High oil cut It has excellent electrical insulation
• High gas/oil ratio applications properties and physical properties
with regard to tear resistance, tensile
strength, and elasticity. The lead for-
Benefits mulation provides an excellent bar-
n Long ESP system life rier to gas and corrosive fluids and
protects the conductor from damage.
n Lower life cycle costs These qualities make the Redalead
cables long-lasting and durable.
Features A new low-profile version of the
cable permits elimination of the braid
n Ability to install in tight-clearance without detriment to the integrity of
wells the cable. This low-profile cable with
n High maximum conductor reduced dimensions allows complet-
temperature range of 232 degC ing reduced-clearance installations
[450 degF] with minimal risk of cable damage.
n Alloy-coated copper conductors Several common cable designs in
to protect from corrosion the family are shown. Many other
n Adhesive layer between conduc- designs are available depending on
tor and ethylene propylene diene the application requirements.
(EPDM) to prevent gas migration
and eliminate damage caused by Redalead classic
gas ingress The popular, proven Redalead clas-
n EPDM insulation and jacket that sic line of round cable is made from
offer long-term insulation electri- the same advanced EPDM insulation
cal properties and impervious lead barrier as the
n Impervious lead barrier to prevent RedaMAX* cables. These components
failure from chemical attack and enforce the Redalead reputation for
gas decompression long-lasting, durable cable.
n Fluoropolymer barriers for
enhanced protection of lead bar-
rier in hostile conditions
n Galvanized-coated steel, heavy
galvanized-coated steel, stainless
steel, and Monel® cable armor to
improve resistance to gas, corro-
sion, and mechanical damage
Maxi
Maxi
2/0 AWG
250 1/0 AWG 50
200 1 AWG 0
2 AWG
150 4 AWG 100 150 200 250 300 350 400 450
6 AWG
100 Maximum well temperature, degF
50
0
100 120 140 160 180 200 220 240 260
Redalead Flat Redalead RoundMLE
RedaMAX (ELBE)
(KEOTB)
450 Maximum well temperature, degF 450 180 3002
Maximum conductor current, A
2/0 N/A
2/0 AWG
350 1/0 AWG
300 1 AWG
2 AWG
250 4 AWG
6 AWG
200
150
100
© 2008 Schlumberger. All rights reserved.
50
*Mark of Schlumberger 0 ESP Catalog
Other company, product, and service names are the properties of their respective owners. 100 150 200 250 300 350 400 450 500
Applications Description
n ESP applications with additional RedaMAX CapTube ESP power cables
requirements for with integral stainless steel tubing
• injection of well treatment can be used for chemical injection or
chemicals hydraulic downhole control applica-
tions. Combining the ESP power cable
• downhole hydraulic control
and an injection tube simplifies work-
over operations by reducing the surface
Benefits equipment and personnel required for
the installation or pull, also improving
n Long ESP system life personal safety. In addition, the capil-
n Lower life cycle costs lary tube is protected by cable armor,
minimizing the risk of damage during
operations.
Features All RedaMAX armored cables, flat
n Ability to install with any and round profile, can be manufactured
RedaMAX* armored ESP power with an injection tube incorporated.
cable There are four standard size capillary
n Armored capillary tube design tubes available:
n 1⁄4-in OD, 0.049-in wall (6.35 ×
n Smaller overall diameter
1.245 mm) 316L stainless steel with
n Resistance to mechanical damage working pressure of 7,350 psi
n Simplified workover operations [50,676 kPa]
n 5⁄16-in OD, 0.049-in wall (7.937 ×
1.245 mm) 316L stainless steel, with
working pressure of 5,900 psi [40,681
kPa]
n 3⁄8-in OD, 0.049-in wall (9.525 ×
1.245 mm) 316L stainless steel, with
working pressure of 4,900 psi [33,786
kPa]
n 1⁄2-in OD, 0.049-in wall (12.7 × 1.245
mm) 316L stainless steel with
working pressure of 14,700 psi
[101,353 kPa]
RedaMAX ESP power cables are
designed with the latest materials and
technology to provide superior service
in all your ESP applications.
Applications Description
n ESPs in high temperatures RedaMAX* motorlead extension
(up to 232 degC [450 degF]) (MLE) designs provide the optimum
combination of installation clearance
and downhole performance. The
Benefits primary polyimide tape provides
n Long ESP system life excellent insulation and dielectric
n Lower life cycle costs strength. It also allows minimal cable
dimensions for installation in tight
clearances. Component materials
Features are selected from those used in
n Dual-layered polyimide tape the RedaMAX ESP power cables to
primary insulation maximize system reliability and
integrity. These qualities make the
n Ethylene propylene diene (EPDM) RedaMAX MLEs long-lasting and
proprietary secondary insulation durable.
n Lead and fluorocarbon tape The polyimide tape, EPDM
barriers to prevent failures from insulation, nitrile jacket, and
chemical attack and tape-and-braid cable incorporate
gas decompression Kapton® polyimide insulation on
n Fully annealed, high-conductivity each conductor to provide additional
copper conductors temperature resistance as well as
n Tough, high-oil-resistance nitrile dielectric strength. The fluoropolymer
rubber jacket to resist mechanical tape barrier provides a mechanical
damage and chemical attack barrier to more aggressive well fluids
as well as adding mechanical hoop
n Galvanized steel, stainless steel, or strength to protect against explosive
Monel® armor to protect against decompression in gassy environments.
gas, corrosion, and mechanical The MLE design is rated to 232
damage degC [450 degF] and has excellent
electrical insulation properties and
physical properties with regard to
tear resistance, tensile strength,
and elasticity. The lead formulation
provides an excellent barrier to gas
and corrosive fluids and protects the
conductor from damage.
Several common MLE designs
are shown.
Maxi
Maxi
50 20
0 0 0
100 150 200 250 300 350 400 450 100 120 140 160 180 200 220 240 260 0
Maximum well temperature, degF Maximum well temperature, degF
Redalead RoundMLE
RedaMAX (ELBE)
(KEOTB) RedaMAX
RedaMAX MLE
180 (KELB)
(PPEPE)
450 180 300250
Maximum conductor current, A
2/0 N/A
2/0 AWG
350
300
10 mm2‡/1 0.141 [3.58] 1/0 AWG
0.247 [6.27]
1 AWG
0.311 [7.90]
Redalead Flat (EL)
0.400 × 1.012 [10.16 × 25.70] 0.90 [1.34]
4 AWG/1 0.204 [5.18] 0.331 [8.41]
2 AWG 400
0.401 [10.19] 0.517 × 1.302 [13.13 × 33.07] 1.43 [2.13]
5 kV flat
250 (KELB G5F) 4 AWG
Maximum conductor current, A
2/0 AWG
350 1/0 AWG
300 1 AWG
2 AWG
250 4 AWG
6 AWG
200
150
100
50
© 2008 Schlumberger. All rights reserved.
0
*Mark of Schlumberger ESP Catalog
100product,
Other company, 150 200 names250
and service 300
are the properties 350 400 owners.
of their respective 450 500
Maximum well temperature, degF
Back to Power Cables
RedaMAX Hotline
Motorlead Extensions
Applications Description
n Electric submersible pumps All designs in the RedaMAX*
(ESPs) in Hotline* motorlead extension family
• Steam-assisted gravity drainage of ESP cables benefit from our patented
(SAGD) applications EPDM and PEEK insulation formula-
tion. These motorlead extensions are
• High temperatures
intended for extreme applications:
• High levels of gas high temperatures, high corrosive con-
• Highly corrosive wells with high tents, and high gas/oil ratios (GORs).
levels of H2S and CO2 These cables have been specifically
designed for steamflood applications
in which an ESP is used. The
Benefits additional benefits of the design are the
n Long ESP system life in hostile additional barrier and insulation that
environments allow for operations in high-H2S and
n Low life cycle costs CO2 wells, as well as high-GOR wells.
REDA Hotline I
Features
The REDA Hotline I motorlead
n High maximum conductor tem- extension incorporates a dual-layered
perature of 260 degC [500 degF] polyimide tape with an EPDM
n Impervious lead barrier to prevent insulation and lead barrier. This
failure from chemical attack and design is used for temperatures up to
gas decompression 232 degC [450 degF]. A heavy lead
n Fatigue and corrosion resistance wall option is available for high-GOR
n Galvanized steel or Monel® armor applications and highly corrosive
to improve resistance to gas, cor- conditions (H2S and CO2).
rosion, and mechanical damage
n Ethylene propylene diene (EPDM) REDA Hotline II
and polyetheretherketone (PEEK) The REDA Hotline II motorlead
insulation compounds for long- extension incorporates a dual-layered
term performance polyimide tape with an EPDM
insulation and lead barrier. This
design is used for temperatures up to
232 degC [450 degF]. A heavy lead
wall option is available for high-GOR
applications and highly corrosive
conditions (H2S and CO2).
Max
Maxi
50
Maxi
Maxi
0 20 0
100 0 150 200 250 300 350 400 450 0 100 150 200 250 300 350 400 450 500
100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180
Maximum well temperature, degF Maximum well temperature, degF
Maximum well temperature, degF Maximum well temperature, degF
RedaMAX
RedaMAX 400 MLE (KELB)
Round (ETBE and EE) RedaMAX Hotline MLE (PEEKLB)
450 250 400
Maximum conductor current, A
1/0 AWG
350 1/0 AWG
350 200 1/0 N/A
1 AWG
1 AWG 1 N/A 300 2 AWG
300 2 AWG 2 AWG
150 4 AWG 250 4 AWG
250 4 AWG 6 AWG
6 AWG 6 AWG 200
200 100
150 150
100 50 100
50 50
0 0 0
100 100
150 150200 200 250 250 300300 350
350 400 450
450 500 0 50 100 150 200 250 300 350 400 450 500
Maximum
Maximum well temperature,
well temperature, degF degF Maximum well temperature, degF
2/0 AWG
350 1/0 AWG
300 1 AWG
2 AWG
250 4 AWG
6 AWG
200
150
100
50
0
100 150 200 250 300 350 400 450 500
Maximum well temperature, degF
Applications Introduction
■ ESP installations During the past 25 years, Lasalle* ESP
■ Completions with downhole gauges cable protectors have been field
■
proven in a wide array of oilfield
Intelligent and standard comple-
applications and in many types of
tions using control line, fiber-
completions. Lasalle protectors from
optic cable or electric cable
Schlumberger are used more often in
subsea, deepwater, and extended-
Benefits reach completions than any other
type of cable protector.
■ Molds control line and cable The all-cast crosscoupling cable
during installation protector is at the core of a wide range
■ Supports the control line rather of manufactured products.
than physically gripping it Cast in either carbon or stainless
■ Prevents damage during dynamic steel, the Lasalle protectors are
motion of production tubing designed to ensure that all control
■ Demounts easily and allows lines and ESP power cables are pro-
reinstallation tected for the full production string
length. By protecting these compo-
■ Reduces the risk of hang up nents from crushing and abrasive
during completion installation forces during installation of the com-
pletion, Lasalle protectors extend the
Features equipment run life, functionality, and
operability of all downhole equip-
■ Optimum standoff ment. Without this protection, dam-
■ Reusable, one-piece design age to the control line and cable could
■ Optimized cable slot lead to premature malfunction or
■ Maximized chamfers completion failure.
Protectors can be custom designed
■ All cast construction to meet specific project requirements,
■ Interlock design of hinge or they can be adapted on site.
and fasteners
■ Locator neck fixing position Crosscoupling cable protectors
■ Weight-reducing pockets Lasalle crosscoupling cable protectors
■ Unique flapper mechanism can be supplied in all-cast, strap-type,
or slimline design.
Strap-type protectors are only
recommended when the internal drift
of the casing is not sufficient to
accommodate the all-cast design.
However, the slimline protector design
provides an all-cast protector for wells
with restricted tubing or tight casing
clearances.
Back to Cables
Crosscoupling protectors are avail- Special application
able for tubing sizes from 2 3⁄8 in. to cable protectors
9 5⁄8 in. and can be produced for all cou-
pling types and all control line and Subsurface safety valve protector
cable specifications. The patented design protects the
Continual design evolution of these control line and cable while it is
protectors, based on client feedback, bypassing large-diameter equipment.
ensures that installation and removal The unique flapper mechanism molds
of the protectors is simple and quick. the control line and cable without rig
When used with a pneumatic kit by an crew assistance to ensure the control
experienced rig crew, the preengaged line and cable are lifted from the
hexagonal head bolt protector can be tubing to exit the protector parallel
installed in approximately 20 s. The self- to the valve body. The protector
locating fastening mechanism mini- securely captures the control line and
mizes the potential for thread damage. cable in the protector body. The unit is
designed to resist axial movement by
locating a cast internal lip profile in
Harsh environment the gap between the flow coupling and
cable protector the equipment sub or a groove
In subsea wells, the completion string machined in the flow coupling.
is subjected to excessive cyclical This protector is available for popu-
action caused by heave, rig misalign- lar tubing sizes, and the range of sizes
ment, or both. is being extended continuously. The
Harsh environment protectors are standard Lasalle subsurface safety
available for tubing sizes from 3 in. to valve (SSSV) control line protector
7 in. and can be provided for all cou- is available for all tubing sizes.
pling types and all control line and Side-pocket mandrel protector
cable specifications. In conjunction with the development
of the new SSSV control line/cable
Motorlead extension protector, a new side-pocket mandrel
cable protector (SPM) protector has also been devel-
oped. This unit incorporates the same
Two motorlead extension (MLE) protection capabilities as the SSSV
protectors are available in an all-cast control line protector, with the excep-
body design, typically with a stainless tion of the flapper mechanism. The
steel saddle clamp. One MLE protec- minimal step between the tubing and
tor is specifically for the pothead the mandrel body leaves insufficient
location and the other is for the room to locate the flapper in this unit.
tandem equipment above and below This protector is available for popular
the motor pothead. tubing sizes, and the range of sizes is
The MLE designs are centralized or being extended continuously. The stan-
noncentralized types to meet specific dard Lasalle SPM protector is available
completion requirements. These for all tubing sizes.
protectors can be provided to meet
all pump string combinations and all
control line and cable specifications.
Lasalle MLE protectors are
designed for quick and simple installa-
tion. These protectors are typically
designed with a preengaged hexagonal
head bolt. Because this mechanism is
self-locating, the potential for thread
damage is minimized, saving time
during installation.
Back to Cables
RedaMAX
ESP Power Cables
Power Cable n RedaMAX Motorlead Extensions © 2008 Schlumberger. All rights reserved.
RedaMAX is a mark of Schlumberger.
Other company, product, and service names
Power Cable n RedaMAX Motorlead Extensions © 2008 Schlumberger. All rights reserved.
RedaMAX is a mark of Schlumberger.
Other company, product, and service names
Power Cable n RedaMAX Motorlead Extensions © 2008 Schlumberger. All rights reserved.
RedaMAX is a mark of Schlumberger.
Other company, product, and service names
Power Cable n RedaMAX Motorlead Extensions © 2008 Schlumberger. All rights reserved.
RedaMAX is a mark of Schlumberger.
Other company, product, and service names
FixStar* 600
Description Max. Voltage Current Weight, Part Number Part Number
Rating, V Rating, A lbm [kg] (Base Model) (400- to 1,000-V Backspin Protection)
FixStar 600-45 600 45 250 [114] 100151381 100135121
FixStar 600-90 600 90 250 [114] 100151379 100135109
FixStar 600-135 600 135 250 [114] 100151182 100120627
Note: Each FixStar drive comes with a UniConn* controller, but with no Bristol amp chart recorder.
FixStar 1500
Description Max. Voltage Current Weight, Part Number Part Number
Rating, V Rating, A lbm [kg] (Base Model) (800- to 2,000-V Backspin Protection)
FixStar 1500-70 1,500 60 1,100 [499] 100228228 100228223
FixStar 1500-130 1,500 125 1,100 [499] 100228226 100228221
FixStar 1500-170 1,500 150 1,100 [499] 100228225 100228220
FixStar 1500-200 1,500 200 1,100 [499] 100228224 100218365
Note: Each FixStar drive comes with a UniConn controller, but with no Bristol amp chart recorder.
FixStar 3300
Description Max. Voltage Current Weight, Part Number Part Number
Rating, V Rating, A lbm [kg] (Base Model) (1,800- to 4,000-V Backspin Protection)
FixStar 3300-70 3,300 70 1,100 [499] 100151203 100129046
FixStar 3300-130 3,300 130 1,100 [499] 100151202 100129018
FixStar 3300-170 3,300 170 1,100 [499] 100151198 100128973
FixStar 3300-200 3,300 200 1,100 [499] 100151195 100128667
Note: Each FixStar drive comes with a UniConn controller, but with no Bristol amp chart recorder.
FixStar 5000
Description Max. Voltage Current Weight, Part Number Part Number
Rating, V Rating, A lbm [kg] (Base Model) (3,000- to 5,000-V Backspin Protection)
FixStar 5000-70 5,000 70 1,100 [499] 100151193 100128303
FixStar 5000-130 5,000 130 1,100 [499] 100151189 100128300
FixStar 5000-170 5,000 170 1,100 [499] 100151188 100128298
FixStar 5000-200 5,000 200 1,100 [499] 100151187 100128274
Note: Each FixStar drive comes with a UniConn controller, but with no Bristol amp chart recorder.
Optional Features
n Space heater with thermostat to VariStar SWD VSD system
prevent condensation
n UniConn three-phase current
transformer for three-phase current
monitoring
n Potential transformers for three-
phase voltage monitoring
n UniConn expansion cards
n Air intake filter that prevents entry
of blowing rain (at angles greater
than 45°)
n Light and 110-/220-V utility recep-
tacle powered by a 1-kVA potential
transformer
n StarShield* transient voltage surge
suppressor
n Sine wave output harmonic filter
† not applicable
SpeedStar SWD VSDs—NEMA 3R, 6 Pulse, 104°F [40°C] Ambient Temperature Rated
SpeedStar SWD VSDs—NEMA 3R, 12 Pulse, 122°F [50°C] Ambient Temperature Rated
SpeedStar 2000 Plus VSDs—NEMA 3R, 6 Pulse, 104°F [40°C] Ambient Temperature Rated
SpeedStar 2000 Plus VSDs—NEMA 3R, 12 Pulse, 104°F [40°C] Ambient Temperature Rated
SpeedStar 2000 Plus VSDs—NEMA 1, 6 Pulse, 122°F [50°C] Ambient Temperature Rated
SpeedStar 2000 Plus VSDs—NEMA 1, 12 Pulse, 122°F [50°C] Ambient Temperature Rated
SpeedStar 2000 Plus VSDs—NEMA 1, 12 Pulse, 104°F [40°C] Ambient Temperature Rated
StarView* Software
Description Part Number
StarView software for Windows® 2000 and Windows XP tba†
StarView software serial connection cable between UniConn controller and computer 100052238
† to be assigned
Applications
■ Variable speed drives (VSDs)
■ Programmable logic controllers
■ Progressive cavity pump top drives
■ Beam pump motors
■ Pumpoff controllers
■ Instrumentation
Benefits
■ Increased current handling
capability (up to 200 kA)
■ Reduced residual voltage of
metal oxide varistor (MOV)-based
products
■ Improved operations safety
■ Enhanced system reliability
■ Improved equipment protection
Features
■ Operation without fuses
■ UL listed
■ Optional installation with large
size cables or directly on bus bars
(inline connection)
■ NEMA 4 enclosure rating
■ All products within specified
tolerances
■ 10-yr warranty
VSD enclosures
Schlumberger also designs and manu-
factures outdoor-rated enclosures that
house the VSD, line reactors, and asso-
ciated controls and auxiliaries. The
enclosures are completely sealed
and climate-controlled to maintain
a constant temperature in a dust-free
environment.
StarShield TVSS External Retrofit Kits for Third-Party VSDs (for installation at the input)
Part Number
100261002 100261003 100261004 100261005
Nominal system voltage, V 760 (L-L) 760 (L-L) 760 (L-L) 760 (L-L)
Clamping voltage, peak (RMS) 607 (429) 833 (589) 607 (429) 833 (589)
StarShield modules 100220423 100220424 100220423 100220424
Modes of protection L-G, L-L L-G, L-L L-G, L-L L-G, L-L
Number of modules 3 3 3 3
Surge rating per module, kA 120 200 120 200
Dimensions (H × W × D), in. [cm] 20 × 16 × 8 20 × 16 × 8 20 × 16 × 8 20 × 16 × 8
[50.8 × 40.6 × 20.3] [50.8 × 40.6 × 20.3] [50.8 × 40.6 × 20.3] [50.8 × 40.6 × 20.3]
Cable size, AWG no. 2 2 2 2
SpeedStar VSD type 6 pulse 6 pulse 6 pulse 6 pulse
Enclosure rating NEMA 4 NEMA 4 NEMA 4 NEMA 4
Surge counter ready No No Yes Yes
Fuses included Yes Yes Yes Yes
Junction Boxes
Description Voltage Weight, Dimensions Part Number
Rating, kV lbm [kg] (W × H × D),
in. [cm]
Explosion-proof wellhead junction box 5 250 114] 24 × 30 × 14 100021798
[61 × 76 × 36]
Wellhead junction box, NEMA 3R 5 50 [23] 20 × 22 × 10 AC01130
[51 × 56 × 25]
Wellhead junction box, stainless steel Type 316, 5 60 [27] 20 × 20 × 9 AC01174
NEMA 4X [51 × 51 × 23]