The document outlines a test plan for testing a power supply with 6 tests. Each test has an engineering specification number, what is being tested (e.g. mass, operating time, voltage), how it will be tested, and pass/fail criteria. The tests are designed to test that the power supply has a mass less than 800g, can operate a vehicle for over 1 hour, is self-contained, has a voltage between 6-9V, can supply power for over 3 hours on a discharge test, and has dimensions under 9cm by 4cm by 4cm.
The document outlines a test plan for testing a power supply with 6 tests. Each test has an engineering specification number, what is being tested (e.g. mass, operating time, voltage), how it will be tested, and pass/fail criteria. The tests are designed to test that the power supply has a mass less than 800g, can operate a vehicle for over 1 hour, is self-contained, has a voltage between 6-9V, can supply power for over 3 hours on a discharge test, and has dimensions under 9cm by 4cm by 4cm.
The document outlines a test plan for testing a power supply with 6 tests. Each test has an engineering specification number, what is being tested (e.g. mass, operating time, voltage), how it will be tested, and pass/fail criteria. The tests are designed to test that the power supply has a mass less than 800g, can operate a vehicle for over 1 hour, is self-contained, has a voltage between 6-9V, can supply power for over 3 hours on a discharge test, and has dimensions under 9cm by 4cm by 4cm.
Test # Engr. Spec. Specification Gathered Data Pass Fail Criteria
# Source (description) Test Procedure 1 Mass in grams PASS: Mass is less than 800g
FAIL: Mass is greater
Weigh the Power Pack than 800g ES3 CN3 Mass On Scale 2 Observe total PASS the vehicle can Assemble the vehicle operation time operate longer than 1 using Newer Generation hour hardware. Fully charge the battery. FAIL: the vehicle can Operate the vehicle like a operate no longer than 1 ES8 CN10 Operating time freshman hour 3 Observe if the PASS: the power supply power supply self- is self-contained contained Power Source is Assemble the vehicle FAIL: the power supply is ES12 CN9 portable with the power supply not self-contained 4 Voltage in Volts PASS: The voltage is Fully charge the battery less than 9V but greater as described in the than 6V battery charging manual FAIL: The voltage is Measure voltage at the greater than 9V or less battery output after the than 6V ES20 Functionality Supply voltage battery is fully charged 5 Fully charge the battery, Voltage in Volts PASS: The voltage is ES20 Functionality Supply voltage load the battery with 5.1 greater than 6V Ohm resistor and let it discharge for 3 hours FAIL: The voltage is less After 3 hours, measure than 6V ES21 Functionality Power supplied the output voltage 6 ES4 CN4 Length Put the Power Supply on width, length and ES5 CN4 Width a flat Surface and height in cm PASS: width, length and height are all under 9cm by 4cm by 4cm
FAIL: width, length and
height are not all under ES6 CN4 Height 9cm by 4cm by 4cm