Professional Documents
Culture Documents
Segundo Idioma: Ingeniería en Electromecánica
Segundo Idioma: Ingeniería en Electromecánica
SEGUNDO IDIOMA
TALLER DE INVESTIGACIÓN II
CARRERA
INGENIERÍA EN ELECTROMECÁNICA
ESTUDIANTE
OLVERA CHAN JOSE SALVADOR
DOCENTE
ING. PECH BORGES PASCUAL GABRIEL
PROGRESO YUCATÁN
2019
1. Identify the most common damages in conventional ground clamps and highlight the
Justification
This activity will be carried out in order to know the most frequent problems faced by users
of welding machines, and that the design to be carried out focuses on minimizing these
problems.
Tool
Survey
Result
Evidence of the physical condition of the various welding equipment and data needed to
produce a graph showing the frequency of the most common problems will be obtained.
Justification
This activity is carried out in order to select an optimal construction material in terms of
Tool
Comparative table
Result
The comparative table will select the construction material for the proposed design
Justification
This activity addresses computer-aided design and drawing by constructing a series of data
or specifications to support all those users who, at some point wish to build this design in a
physical way.
Tool
Solidworks Software
Result
Solidworks will be the key tool for the development of this activity, obtaining from it the
design plan with its corresponding specifications. In addition, this same software will perform
the validation of the proposed design through finite element analysis involving an electric
current flow.