Professional Documents
Culture Documents
Refrigeration and Air Conditioning LAB: Department of Mechanical Engineering
Refrigeration and Air Conditioning LAB: Department of Mechanical Engineering
Refrigeration and Air Conditioning LAB: Department of Mechanical Engineering
WAH CANTT
DEPARTMENT OF MECHANICAL ENGINEERING
Week Topic
Demonstration
1. Draw the layout of fluid mechanics lab.
2. To examine the different parts of hydraulic bench and their function.
3. To verify Bernoulli’s theorem experimentally using Bernoulli apparatus.
1 4. To verify the momentum equation experimentally through impact of jet experiment.
5. To determine experimentally the metacentric height of flat-bottomed pontoon.
6. To determine experimentally the flow over a triangular notch or weir and to find the
value of coefficient of discharge (Cd).
Demonstration
7. To determine experimentally the flow over a rectangular notch or weir and to find the
value of coefficient of discharge (Cd).
8. To determine experimentally the hydrostatic pressure on submerged surfaces.
9. To determine experimentally the coefficient of discharge (Cd) using Venturi meter.
2 10. To calibrate Bourdon gauge by means of dead weight pressure calibration.
11. To determine experimentally the hydraulic coefficients (Cv, Cd and Cc) by tracing the
jet trajectory from a given orifice.
12. To determine the loss factors for flow through a range of pipe fittings including bends,
a contraction and enlargement and a gate valve.
G3 To determine experimentally the hydraulic coefficients (Cv, Cd and Cc) by tracing the jet
trajectory from a given orifice.
G4 To determine experimentally the flow over a triangular notch or weir and to find the value
of coefficient of discharge (Cd).
13
G5 To determine experimentally the coefficient of discharge (Cd) using Venturi meter.
G7 To determine experimentally the hydraulic coefficients (Cv, Cd and Cc) by tracing the jet
trajectory from a given orifice.
G8 To determine experimentally the flow over a triangular notch or weir and to find the value
of coefficient of discharge (Cd).
G1 To calibrate Bourdon gauge by means of dead weight pressure calibration.
G3 To determine experimentally the flow over a triangular notch or weir and to find the value
of coefficient of discharge (Cd).
14
G4 To determine experimentally the hydraulic coefficients (Cv, Cd and Cc) by tracing the jet
trajectory from a given orifice.
G5 To calibrate Bourdon gauge by means of dead weight pressure calibration.
Lab Quiz # 2
17
Notebook Submission & Final Viva
18 FINAL TERM EXAMINATION
EXPERIMENT SEQUENCE FOR
SECTION A 1 SECTION A 2
BLACK BLUE
UET/SCET-18F-ME-01 GROUP 1 UET/SCET-18F-ME-25 GROUP 1 1,6,7,11,2,3,4,5,8,9,10,12
UET/SCET-18F-ME-02 GROUP 1 UET/SCET-18F-ME-26 GROUP 1 1,6,7,11,2,3,4,5,8,9,10,12
UET/SCET-18F-ME-03 GROUP 1 UET/SCET-18F-ME-27 GROUP 1 1,6,7,11,2,3,4,5,8,9,10,12
UET/SCET-18F-ME-04 GROUP 2 UET/SCET-18F-ME-28 GROUP 2 1,7,11,6,8,9,10,12,2,3,4,5
UET/SCET-18F-ME-05 GROUP 2 UET/SCET-18F-ME-29 GROUP 2 1,7,11,6,8,9,10,12,2,3,4,5
UET/SCET-18F-ME-06 GROUP 2 UET/SCET-18F-ME-30 GROUP 2 1,7,11,6,8,9,10,12,2,3,4,5
UET/SCET-18F-ME-07 GROUP 3 UET/SCET-18F-ME-31 GROUP 3 1,2,3,10,12,8,9,4,5,11,6,7
UET/SCET-18F-ME-09 GROUP 3 UET/SCET-18F-ME-32 GROUP 3 1,2,3,10,12,8,9,4,5,11,6,7
UET/SCET-18F-ME-10 GROUP 3 UET/SCET-18F-ME-33 GROUP 3 1,2,3,10,12,8,9,4,5,11,6,7
UET/SCET-18F-ME-11 GROUP 4 UET/SCET-18F-ME-34 GROUP 4 1,8,9,4,5,2,3,10,12,6,11,7
UET/SCET-18F-ME-12 GROUP 4 UET/SCET-18F-ME-35 GROUP 4 1,8,9,4,5,2,3,10,12,6,11,7
UET/SCET-18F-ME-13 GROUP 4 UET/SCET-18F-ME-36 GROUP 4 1,8,9,4,5,2,3,10,12,6,11,7
UET/SCET-18F-ME-14 GROUP 5 UET/SCET-18F-ME-37 GROUP 5 1,6,7,11,2,3,4,5,8,9,10,12
UET/SCET-18F-ME-15 GROUP 5 UET/SCET-18F-ME-38 GROUP 5 1,6,7,11,2,3,4,5,8,9,10,12
UET/SCET-18F-ME-16 GROUP 5 UET/SCET-18F-ME-39 GROUP 5 1,6,7,11,2,3,4,5,8,9,10,12
UET/SCET-18F-ME-17 GROUP 6 UET/SCET-18F-ME-41 GROUP 6 1,11,6,7,8,9,10,12,2,3,4,5
UET/SCET-18F-ME-18 GROUP 6 UET/SCET-18F-ME-42 GROUP 6 1,11,6,7,8,9,10,12,2,3,4,5
UET/SCET-18F-ME-19 GROUP 6 UET/SCET-18F-ME-43 GROUP 6 1,11,6,7,8,9,10,12,2,3,4,5
UET/SCET-18F-ME-20 GROUP 7 UET/SCET-18F-ME-44 GROUP 7 1,2,3,10,12,8,9,4,5,11,7,6
UET/SCET-18F-ME-21 GROUP 7 UET/SCET-18F-ME-45 GROUP 7 1,2,3,10,12,8,9,4,5,11,7,6
UET/SCET-18F-ME-22 GROUP 7 UET/SCET-18F-ME-46 GROUP 7 1,2,3,10,12,8,9,4,5,11,7,6
UET/SCET-18F-ME-23 GROUP 8 (18R-UET/SCET-17F-ME-070) GROUP 8 1,8,9,4,5,2,3,10,12,6,7,11
UET/SCET-18F-ME-24 Group 8 (18R-UET/SCET-17F-ME-075) GROUP 8 1,8,9,4,5,2,3,10,12,6,7,11
SWEDISH COLLEGE OF ENGINEERING & TECHNOLOGY WAH CANTT
Mechanical Engineering (Entry-2016)
Fall-2019
Semester - 7th
RAC LAB
G1 Perform Experiment #1
G2 Perform Experiment #2
G3 Perform Experiment #3
BREAK
Checking of
Attendance + Previous Queries Results & Final
G4 Perform Experiment #4 Attendance
G5 Perform Experiment #5
Perform Experiment #6
G6
G7 Perform Experiment #7
G8 Perform Experiment #8
Course
Course Title Credit Hour (Lab) Instructor (Lab) Supervisor Course Instructor
Code
Engr. Ghulam
ME-422 Refrigeration & Air Conditioning 3 1 Naveed Ahmad Engr. Haseeb ur Rehman
Murtaza
SWEDISH COLLEGE OF ENGINEERING & TECHNOLOGY WAH CANTT
Mechanical Engineering (Entry-2016)
Fall - 2019
Semester - 7th
RAC LAB
10
Group 05 mints 65 mints 65 mints 05 mints
mints
BREAK
Demonstration of Experiments
G1-G8 Attendance Demonstration of Experiments Final Attendance
(continued)
Course
Course Title Credit Hour (Lab) Instructor (Lab) Supervisor Course Instructor
Code
Taxonomy
CLO Statement PLO
Level
CLO 1 Demonstrate knowledge of apparatus while working
individually or in a team A3 9
Total
All parts of hydraulic All parts of hydraulic bench are All parts of
bench are mentioned. but lacking hydraulic bench
Writing the mentioned. Completeness. are incomplete
experiment written in incomplete sentence and
procedure is
lacking.
TOTAL
SWEDISH COLLEGE OF ENGINEERING AND TECHNOLOGY,
WAH CANTT
4. Laboratory Safety Ensure and follow safety Observes safety rules Disregards safety rules
Rules rules. Motivate group and procedures. and procedures.
members to follow safety
rules.
5. Data Collection Results and discussion is All required sections Some sections are
and Analysis relevant and are present. Figures missing.
understanding of graphs is and graphs are
shown. properly drawn.
Total
SWEDISH COLLEGE OF ENGINEERING AND TECHNOLOGY,
WAH CANTT
Experiment Title:
Performance Exemplary Satisfactory Marks
Criteria (5) (3-4)
Writing the
Layout
Total
Experiment Title:
Performance Exemplary Satisfactory Unsatisfactory Marks
Criteria (5) (2-4) (1)
Writing the
experiment
Understanding
the concept
TOTAL
SWEDISH COLLEGE OF ENGINEERING AND TECHNOLOGY,
WAH CANTT
2. Teamwork
3. Conducting
Experiment
4. Laboratory
Safety Rules
5. Data
Collection and
Analysis
Total