Professional Documents
Culture Documents
Dball-dball2-Tl1 en Ig Nf20160106
Dball-dball2-Tl1 en Ig Nf20160106
Dball-dball2-Tl1 en Ig Nf20160106
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
Door lock and transponder override firmware for specific Toyota, Lexus, Scion and Pontiac vehicles.
It is compatible with models that use the RX/TX immobilizer lines at key switch and with select PTS
models.
WARNING
- No takeover feature is available for Push-to-Start vehicles.
- If there is no immobilizer, the module will not work (that also includes door lock controls).
Index
Vehicle Application Guide................................................................................................................................................ 02
Programming
Module Programming
Type 1 (Key-type vehicles).................................................................................................................................
Types 2 & 3 (PTS-type vehicles)........................................................................................................................ 20
Type 4 (Key-type vehicles without CAN)............................................................................................................ 21
Type 5 (PTS-type vehicles without CAN)........................................................................................................... 21
Type 6 (PTS-type Toyota Prius).......................................................................................................................... 22
Module Reset................................................................................................................................................................... 22
Hard Reset....................................................................................................................................................................... 23
Feature & Option List....................................................................................................................................................... 23
Feature Programming...................................................................................................................................................... 24
24
LED Diagnostics & Troubleshooting.................................................................................................................................
Limited One-Year Consumer Warranty............................................................................................................................ 25
26
Quick Reference Guide................................................................................................................................................... 27
® Toyota and Lexus are registered trademarks and property of their respective companies.
Page 2
Vehicle Application Guide
The following table lists the vehicles and features which are compatible with this product. The number assigned to each
year allows you to determine which installation type should be used for your vehicle.
ST-E-Brake Status
ST-Ignition Status
DL-Door Unlock
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
Lexus
ES 330 4 4 4 •
ES 350 (Smart Key) 3 3 3 3 3 3 • • • • • • • • • • • • D • • •
GS 300 (Smart Key) 5 •
GS 350 (Smart Key) 5 5 •
GS 430 (Smart Key) 5 5 •
GS 450h (Smart Key) 5 5 •
GS 460 (Smart Key) 5 •
GX 470 4 4 4 4 4 4 4 •
IS 250 (Smart Key) 5 5 5 •
IS 350 (Smart Key) 5 5 5 •
IS F (Smart Key) 5 •
LS 430 4 4 4 •
LS 460 (Smart Key) 5 5 •
LS 600h (Smart Key) 5 •
LX 470 4 4 4 4 4 •
RX 330 4 4 4 •
RX 350 4 4 4 •
RX 400h 4 4 4 •
Pontiac
Vibe 1 1 • • • • • • • • • • • D • • •
Vibe 4 •
Scion
tC 4 4 4 4 4 4 •
xB 1 1 1 • • • • • • • • • • • D • • •
xD 1 1 1 • • • • • • • • • • • D • • •
Legend:
D: Data-to-Data (D2D) only AV: Horn & Lights Controls
•: D2D & Wire-to-Wire (W2W) DL: OE Door Lock & Alarm Controls
PK: Transponder & Immobilizer Override
RS: Remote Start & Engine Controls
SS: Integrated Security & Monitoring
ST: Function/Feature Status
Note: Keyless and Smart-Key will remain functional during remote start.
- No takeover feature is available on Push-to-Start vehicles.
- If equipped, the OE remote starter must be removed before installation. See page 4 for more information.
Page 3
Vehicle Application Guide
ST-E-Brake Status
ST-Ignition Status
DL-Door Unlock
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
Toyota
4Runner 4 4 4 4 4 4 4 4 •
Avalon 4 4 4 4 4 4 •
Avalon (Smart Key) 5 5 5 5 5 •
Camry 1 1 1 1 1 • • • • • • • • • • • • D • • •
Camry 4 4 4 4 •
Camry (Smart Key) 3 3 3 3 3 • • • • • • • • • • • • D • • •
Camry Hybrid 3 3 3 3 3 • • • • • • • • • • • • D • • •
Corolla 1 1 • • • • • • • • • • • • D • • •
Corolla 4 4 4 4 •
Corolla (Smart Key) 2 2 2 2 2 • • • • • • • • • • • • D • • •
FJ Cruiser 4 4 4 •
Highlander 1 1 1 • • • • • • • • • • • • D • • •
Highlander 4 4 4 4 •
Highlander (Smart Key) 3 3 3 3 3 3 • • • • • • • • • • • • D • • •
Highlander Hybrid 3 3 3 3 3 3 • • • • • • • • • • • • D • • •
Highlander Hybrid 4 4 •
Land Cruiser 4 4 4 4 4 •
Land Cruiser (Smart Key) 5 5 5 •
Matrix 1 1 • • • • • • • • • • • D • • •
Matrix 4 4 4 4 •
Prius (Smart Key) 6 6 6 6 6 6 •
RAV4 1 1 1 1 1 • • • • • • • • • • • D • • •
RAV4 4 4 •
RAV4 (Smart Key) 2 2 2 2 • • • • • • • • • • • D • • •
Sequoia 4 4 4 •
Sienna 4 4 4 4 4 4 4 •
Solara 4 4 4 4 4 4 •
Tacoma 4 4 4 4 4 4 •
Tundra 4 4 4 4 •
Venza 4 •
Yaris 4 4 4 4 4 4 •
Yaris Sedan 4 4 4 4 4 •
Legend:
D: Data-to-Data (D2D) only AV: Horn & Lights Controls
•: D2D & Wire-to-Wire (W2W) DL: OE Door Lock & Alarm Controls
PK: Transponder & Immobilizer Override
RS: Remote Start & Engine Controls
SS: Integrated Security & Monitoring
ST: Function/Feature Status
Note: Keyless and Smart-Key will remain functional during remote start.
- No takeover feature is available on Push-to-Start vehicles.
- If equipped, the OE remote starter must be removed before installation. See page 4 for more information.
Page 4
OEM Remote Starter Detection
How to Know if the Vehicle is Equipped with an OEM Remote Starter
The parking lights flash after 3 seconds. The engine starts and
the parking lights flash repeatedly for 20 seconds.
* The DBALL LED turns ON solid orange for 3 seconds after programming or power up to indicate the bypass is not
active. Refer to LED Diagnostics & Troubleshooting section for more information.
Page 5
Installation Type 1
See page 6 for help on locating key components in the vehicle and wiring reference chart.
White Connector Scion XD and Toyota Yaris
(at headlight switch) (headlight switch)
1 2 3 4
OR
5 6 7 8 9 10 11 12 13
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11 Parking Lights:
pin 13 Connect to
Ignition Connector
Autolight: See page 6 to determine Visit our website
pin 19 the right connector for
your vehicle. www.directechs.com
for more information.
(-) Parking Lights
(-) Hood Status Input
Remote
Starter
(+) Brake Input (+) Accessory (some vehicles require 2 accessories)
[1] (AC) Tach Input (+) Start (some vehicles require 2 start)
(-) Trunk Status Input (+) Ignition (some vehicles require 2 ignition)
(-) Door Status Input (-) Lock Output
(-) E-Brake Status Input (-) Unlock Output
(+) 12V (-) Trunk Output
(-) Ground (-) Ground (-) GWR (Status)
Diagnostic
Connector at OBDII
1 8
9 16
RX
DBALL/
4
7 6 5 4 3 2 1
Black Connector
(at immobilizer)
Page 6
Wiring Reference Chart - Type 1
Wire function Connector Pin position Wire color
Locating Key Components
in the Vehicle
CAN High Diagnostic connector 6 Light Green
CAN Low Diagnostic connector 14 White
Pontiac Vibe Autolight Not equipped
(Key) Clutch Clutch Switch 1 Lt. Green
2009-2010 Parking Lights Headlight Switch 18 Brown
RX Immobilizer 4 Light Blue
TX Immobilizer 5 Beige
Headlight
CAN High Diagnostic connector 6 Light Green Immobilizer
switch
CAN Low Diagnostic connector 14 White
Scion xB Autolight Not equipped
(Key) Clutch Clutch Switch 1 Lt. Green
2008-2010 Parking Lights Headlight Switch 18 White
RX Immobilizer 4 Light Blue
TX Immobilizer 5 Beige
CAN High Diagnostic connector 6 Violet
CAN Low Diagnostic connector 14 White
Scion xD Autolight Not equipped
(Key) Clutch Clutch Switch 1 Black
2008-2010 Parking Lights Headlight Switch 13 White
RX Immobilizer 4 Green
TX Immobilizer 5 Violet
CAN High Diagnostic connector 6 Black
CAN Low Diagnostic connector 14 White
Toyota Camry Autolight Headlight Switch 19 Green
(Key) Clutch Clutch Switch 2 Green
2007-2011 Parking Lights Headlight Switch 18 Black
RX Immobilizer 4 Brown
TX Immobilizer 5 Red
CAN High Diagnostic connector 6 Light Green
CAN Low Diagnostic connector 14 White
Toyota Corolla Autolight Not equipped
(Key) Clutch Clutch Switch 1 Lt.Green
2009-2010 Parking Lights Headlight Switch 18 Brown or White
RX Immobilizer 4 Light blue or Pink
TX Immobilizer 5 Beige or Green
CAN High Diagnostic connector 6 Blue
CAN Low Diagnostic connector 14 White
Toyota Highlander
Autolight Headlight Switch 19 Green
(Key)
Parking Lights Headlight Switch 18 Light Blue
2008-2010
RX Immobilizer 4 Red
TX Immobilizer 5 Light Blue
CAN High Diagnostic connector 6 Light Green
CAN Low Diagnostic connector 14 White
Toyota Matrix Autolight Not equipped
(Key) Clutch Clutch Switch 1 Lt.Green
2009-2010 Parking Lights Headlight Switch 18 Brown
RX Immobilizer 4 Light Blue
TX Immobilizer 5 Beige
CAN High Diagnostic connector 6 Black
CAN Low Diagnostic connector 14 White
Toyota RAV4
Autolight Headlight Switch 19 Green
(Key)
Parking Lights Headlight Switch 18 White
2006-2010
RX Immobilizer 4 Pink
TX Immobilizer 5 Green
Page 7
Installation Type 2a (without T-Harness)
See page 9 for help on locating key components in the vehicle and wiring reference chart.
White Connector
15 16 17 18 19 10 9 8 7 6 5 4 3 2 1 (at headlight switch)
White Connector (-) Parking Lights: pin 18
8 9 10 11 12 13 14 20 19 18 17 16 15 14 13 12 11
1 2 3 4 5 6 7
(at Main body ECU)
Remote
Starter
(-) Hood Status Input power and start sequence.
(+) Brake Input
[1] (AC) Tach Input
(-) Trunk Status Input (-) Lock Output
(-) Unlock Output
(-) Door Status Input
(-) Trunk Output
(-) E-Brake Status Input (+) Starter Output
(+) 12V (+) Ignition Input
White Conn. (-) Ground (-) Ground (-) GWR (Status)
(at Fuse Box)
1
(+)12V: Black, pin 1
RF (+)12V
2
1 8
LED DBALL2 TX XKD2D65
ENGINE
START
Black 71 6 5 4 3 2 1
9 16 STOP
Connector
14 13 12 11 10 9 8
[1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
[2] STSW: Starter Switch Wire.
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
Page 8
Installation Type 2b (with T-Harness TLTH1)
See page 9 for help on locating key components in the vehicle and wiring reference chart.
White Connector
(at headlight switch)
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11 Do not connect any other
accessory, ignition or starter wires
(-) Parking Lights
from the remote starter to the
Remote
Starter
(-) Parking Lights: pin 18 vehicle. The interface module is
handling the required vehicle
(-) Hood Status Input power and start sequence.
(+) Brake Input
[1] (AC) Tach Input (-) Lock Output
(-) Trunk Status Input (-) Unlock Output
(-) Door Status Input (-) Trunk Output
(-) E-Brake Status Input (+) Starter Output
(+) 12V (+) Ignition Input
White Connector (-) Ground (-) Ground (-) GWR (Status)
(at Main body ECU)
15 16 17 18 19 White Conn.
8 9 10 11 12 13 14 (at Fuse Box)
1 2 3 4 5 6 7
RX
DBALL/
4
Page 9
Wiring Reference Chart - Type 2
Pit-Stop/Idle Mode
The Pit-Stop/Idle feature allows the vehicle to remain running after leaving the vehicle.
Refer to the owner's guide of your remote starter for more details.
WARNING
- No takeover feature is available on Push-to-Start vehicles.
See Quick Reference Guide (QRG) at the end of this guide.
- To remote start the engine, all doors must be closed, including rear hatch.
Page 10
Installation Type 3a (without T-Harness)
See page 12 for help on locating key components in the vehicle and wiring reference chart.
White Conn. White Conn.
(at back of main body ECU) (at headlight switch)
2 1
10 9 8 7 6 5 4 3 2 1
6 5 4 3
20 19 18 17 16 15 14 13 12 11
10 9 8 7
Do not connect any other
(-) Parking Lights: Black, pin 18
accessory, ignition or starter wires
[2] (+)STSW: from the remote starter to the
pin 4 or 6
vehicle. The interface module is
(-) Parking Lights handling the required vehicle
(-) Hood Status Input power and start sequence.
Remote
Starter
(+) Brake Input
[1] (AC) Tach Input (-) Lock Output
(-) Unlock Output
(-) Trunk Status Input
(-) Trunk Output [3]
(-) Door Status Input
(+) Starter Output
(-) E-Brake Status Input
(+) Ignition Input
White Conn. (+) 12V
(at Fuse Box)
(-) Ground (-) Ground (-) GWR (Status)
(+)12V
Black wire
pin 1
1
RF (+)12V
2
HS CAN Low:
pin 14
Connection required only if Pit-Stop/
Diagnostic Idle mode is desired (see details on
Connector at OBDII page 12).(Connector side view).
Page 11
Installation Type 3b (with T-Harness TLTH1)
See page 12 for help on locating key components in the vehicle and wiring reference chart.
10 9 8 7 6 5 4 3 2 1 White Connector
(at headlight switch)
20 19 18 17 16 15 14 13 12 11
Do not connect any other
accessory, ignition or starter wires
(-) Parking Lights from the remote starter to the
(-) Parking Lights: Black, pin 18 vehicle. The interface module is
(+) Ignition Output handling the required vehicle
Remote
Starter
(-) Hood Status Input power and start sequence.
(+) Brake Input
[1] (AC) Tach Input
(-) Lock Output
(-) Trunk Status Input
(-) Unlock Output
(-) Door Status Input (-) Trunk Output
(-) E-Brake Status Input (+) Starter Output
(+) Ignition Input
(+) 12V (+) 12V
(-) Ground (-) Ground (-) GWR (Status)
10
(-) Trunk Status Output: Red/Black: 4
harnesses that are
12
White Conn. RX
DBALL/
4
2 1
6 5 4 3
10 9 8 7
(-) Push-to-Start: pin 7
[2] (+)STSW:
pin 4 or 6
ENGINE Black
Connector 7
START 1 6 5 4 3 2 1
TLTH1 STOP
14 13 12 11 10 9 8
(optional)
Connection required only if Pit-Stop/ Idle
1 8
mode is desired. (see details on page
9 16 12).(Connector side view)
Diagnostic
Connector at OBDII
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
Page 12
Wiring Reference Chart - Type 3
Pit-Stop/Idle Mode
Wire function Connector Pin position Wire color
The Pit-Stop/Idle feature allows the vehicle
CAN High Diagnostic Connector 6 Light Green to remain running after leaving the vehicle.
CAN Low Diagnostic Connector 14 Pink Refer to the owner's guide of your remote
Lexus ES 350 Autolight Main Body ECU (E61) 21 Yellow
(Smart Key) Parking Lights Main Body ECU (E61) 23 Black
starter for more details.
2007-2012 Push-to-Start PTS button 7 Blue
STSW* Main Body ECU (E58) 4 or 6 Red or Violet
12V Fuse Box (DA) 1 White WARNING
CAN High Diagnostic Connector 6 Black
- No takeover feature is available on
CAN Low Diagnostic Connector 14 White
Toyota Camry Autolight Main Body ECU (E7) 21 Green Push-to-Start vehicles. See Quick
(Smart Key) Parking Lights Main Body ECU (E7) 23 Black Reference Guide (QRG) at the end
2007-2011 Push-to-Start PTS button 7 Blue of this guide.
STSW* Main Body ECU (E9) 4 or 6 Gray or Violet
12V Fuse Box (1A) 1 Black
CAN High Diagnostic Connector 6 Black
- To remote start the engine, all doors
CAN Low Diagnostic Connector 14 White must be closed, including rear hatch.
Toyota Camry
Autolight Main Body ECU (E7) 21 Green
Hybrid
Parking Lights Main Body ECU (E7) 23 Black
(Smart Key)
2007-2011 Push-to-Start PTS button 7 Blue
STSW* Main Body ECU (E9) 4 Gray
12V Fuse Box (1A) 1 Black
CAN High Diagnostic Connector 6 Black
CAN Low Diagnostic Connector 14 White
Toyota
Autolight Main Body ECU (D8) 21 Green
Highlander
Parking Lights Main Body ECU (D8) 23 Light Blue
(Smart Key)
2008-2013 Push-to-Start PTS button 7 Pink
STSW* Main Body ECU (D10) 4 Pink
12V Fuse Box (1A) 1 Black
CAN High Diagnostic Connector 6 Black
Toyota CAN Low Diagnostic Connector 14 White
Highlander Autolight Main Body ECU (D8) 21 Green
Hybrid Parking Lights Main Body ECU (D8) 23 Light Blue
(Smart Key) Push-to-Start PTS button 7 Pink
2008-2013 STSW* Main Body ECU (D10) 4 Yellow
12V Fuse Box (1A) 1 Black
Push-To-Start
Button
Headlight
switch
Page 13
Installation Type 4
See pages 14-15 for help on locating key components in the vehicle and wiring reference chart.
Connect to
Ignition Connector
Visit our website :
www.directechs.com
(+) 12V (+) 12V for more information.
Remote
Starter
(-) Ground (-) Ground
Autolight
Automatic Transmission:
Connect to vehicle’s starter.
OR
Manual Transmission:
Connect to vehicle’s clutch.
Refer to
www.directechs.com
for clutch wire colors,
pin numbers and
connector details.
For Manual Transmission
vehicles ONLY.
(-) Ground (-) Ground: Brown: 7
(-) Keysense Output: Yellow: 8
Autolight: Orange/Red: 10
14
Autolight: Yellow/Red: 11
(+) 12V (+) 12V: Red: 13 10: Blue/White: (-) GWR (Status) Input
(-) Ground (-) Ground: Black: 14
9: Pink: (+) Ignition Input
TX: Yellow/Black: 10
RX: Orange/Black: 11
10
7 6 5 4 3 2 1
RF (+)12V
2
RX
Black 7-pin DBALL/
4
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
Page 14
Wiring Reference Chart - Type 4
Locating Key Components
Wire function Connector Pin position Wire color
in the Vehicle
Autolight Headlight Switch 12 White
Lexus ES 330
Keysense Key Warning Switch 2 Blue
(Key)
RX Immobilizer 4 Green/White
2004-2006
TX Immobilizer 5 Blue/Yellow
Autolight Headlight Switch 12 Green/Orange
Lexus GX 470
Keysense Key Warning Switch 2 Green/Yellow
(Key)
RX Immobilizer 4 Yellow
2003-2009
TX Immobilizer 5 Yellow/Black
Autolight Multiplex
Lexus LS 430 Headlight
Keysense Key Warning Switch 2 Lt.Green/Black Immobilizer
(Key) switch
2004-2006 RX Immobilizer 4 Red/White
TX Immobilizer 5 Blue/Black
Autolight Headlight Switch 12 Green/Orange
Lexus LX 470
Keysense Key Warning Switch 2 Red/Black
(Key)
RX Immobilizer 4 Blue/Black
2004-2006
TX Immobilizer 5 Violet/Green
Autolight Headlight Switch 12 Brown
Lexus RX 330
Keysense Key Warning Switch 2 Black
(Key)
RX Immobilizer 4 Light Green
2004-2006
TX Immobilizer 5 Brown
Autolight Headlight Switch 19 Brown
Lexus RX 350
Keysense Key Warning Switch 2 Black
(Key)
RX Immobilizer 4 Light Green
2007-2009
TX Immobilizer 5 Brown
Autolight Headlight Switch 19 Brown
Lexus RX 400h
Keysense Key Warning Switch 2 Black
(Key)
RX Immobilizer 4 Light Green
2006-2008
TX Immobilizer 5 Brown
Autolight Not Equipped
Pontiac Vibe Keysense Key Warning Switch 2 Blue/Black
(key) Clutch Clutch Switch 2 Black
2008 RX Immobilizer 4 Blue
TX Immobilizer 5 Brown
Autolight Not Equipped
Scion tC (Key) Yellow(in)
2005-2010 Clutch Clutch Switch Black (out)
RX Immobilizer 4 Yellow
TX Immobilizer 5 Red
Autolight Headlight Switch 12 Green/Orange
Toyota 4Runner
Keysense Key Warning Switch 2 Green/Yellow
(Key)
RX Immobilizer 4 Pink/Green
2003-2009
TX Immobilizer 5 Lt. Green/Red
Autolight Headlight Switch 19 Orange
Toyota Avalon Keysense Key Warning Switch 2 Black
2005-2010 RX Immobilizer 4 Lt.Green
TX Immobilizer 5 Brown
Autolight Headlight Switch 12 White
Toyota Camry Keysense Key Warning Switch 2 Blue
(Key) Clutch Clutch Switch 2 Blue/White
2003-2006 RX Immobilizer 4 Green/White
TX Immobilizer 5 Blue/Yellow
Autolight Not Equipped
Toyota Keysense Key Warning Switch 2 Blue/Black
Corolla (Key) Clutch Clutch Switch 2 Black
2005-2008 RX Immobilizer 4 Blue
TX Immobilizer 5 Green
Autolight Not Equipped
Toyota FJ Cruiser Keysense Key Warning Switch 2 Green/Yellow
(Key) Clutch Clutch Switch 2 Black/Yellow
2007-2009 RX Immobilizer 4 Pink/Green
TX Immobilizer 5 Light Green/Red
Autolight Headlight Switch 12 Pink
Toyota Highlander
Keysense Key Warning Switch 2 Green
(Key)
RX Immobilizer 4 Gray
2004-2007
TX Immobilizer 5 White
Page 15
Wiring Reference Chart - Type 4 (cont’d)
Wire function Connector
Pin
Wire color
Locating Key Components
position in the Vehicle
Autolight Headlight Switch 12 Pink
Toyota Highlander
Keysense Key Warning Switch 2 Green
Hybrid
2006-2007 RX Immobilizer 4 Gray
TX Immobilizer 5 Lt.Blue
Toyota Land Autolight Headlight Switch 12 Green/Orange
Cruiser Keysense Key Warning Switch 2 Red/Black
(Key) Headlight
RX Immobilizer 4 Blue/Black switch
Immobilizer
2003-2007 TX Immobilizer 5 Violet/Green
Autolight Not Equipped
Toyota Matrix Keysense Key Warning Switch 2 Blue/Black
(Key) Clutch Clutch Switch 2 Black
2005-2008 RX Immobilizer 4 Blue
TX Immobilizer 5 Green
Autolight Not Equipped
Toyota RAV4 Keysense Key Warning Switch 2 Blue/Red or White
(Key) Clutch Clutch Switch 1 Black/Yellow
2004-2005 RX Immobilizer 4 Blue/Red
TX Immobilizer 5 Pink
Autolight Headlight Switch 19 Green
Toyota Sequoia
Parking Lights Headlight Switch 18 Orange or Beige
(Key)
RX Immobilizer 4 Lt.Green
2008-2010
TX Immobilizer 5 Blue
Autolight Headlight Switch 12 Violet
Toyota Sienna
(Key) Keysense Key Warning Switch 2 Blue/Black
2004-2010 RX Immobilizer 4 Yellow
TX Immobilizer 5 Yellow/Red
Page 16
Installation Type 5
See page 17 for help on locating key components in the vehicle and wiring reference chart.
(-) Driver’s Door Trigger
Remote
Starter
Parking Lights
(-) Hood Input AC Tach Input
(+) Brake Input (-) Trunk Output
(+) Starter Output
(+) 12V
(+) Ignition Output/Input
(-) Ground (-) Ground (-) GWR (Status)
Brake Switch
(at brake switch)
(+) 12V: Brown: 7
RX
DBALL/
4
RX: pin 10
Page 17
Wiring Reference Chart - Type 5
Locating Key Components
Wire function Connector Pin position Wire color
in the Vehicle
Push-To-Start PTS Button 7 Pink
Lexus GS 300
RX PTS Button 10 Yellow
(Smart Key)
TX PTS Button 9 Blue
2006
Brake Brake Switch 1 Red/Black
Push-To-Start PTS Button 7 Pink
Lexus GS 350
RX PTS Button 10 Yellow Push-To-Start
(Smart Key) Button
TX PTS Button 9 Blue
2007-2008
Brake Brake Switch 1 Red/Black
Push-To-Start PTS Button 7 Pink
Lexus GS 430
RX PTS Button 10 Yellow
(Smart Key)
TX PTS Button 9 Blue
2006-2007
Brake Brake Switch 1 Red/Black
Push-To-Start PTS Button 7 Pink Brake
Lexus GS 450h Switch
RX PTS Button 10 Yellow
(Smart Key)
TX PTS Button 9 Blue
2007-2008
Brake Brake Switch 1 Red/Black
Push-To-Start PTS Button 7 Pink WARNING
Lexus GS 460
RX PTS Button 10 Yellow
(Smart Key)
TX PTS Button 9 Blue
2008
Brake Brake Switch 1 Red/Black - No takeover feature is available on
Push-To-Start PTS Button 7 Black Push-to-Start vehicles.
Lexus IS 250 RX PTS Button 10 Light Blue See Quick Reference Guide (QRG) at
(Smart Key) TX PTS Button 9 Blue the end of this guide.
2006-2008 Clutch Clutch Switch 2 Red - To remote start the engine, all doors
Brake Brake Switch 1 Red/Black must be closed, including rear hatch.
Push-To-Start PTS Button 7 Black
Lexus IS 350
RX PTS Button 10 Light Blue
(Smart Key)
TX PTS Button 9 Blue
2006-2008
Brake Brake Switch 1 Red/Black
Push-To-Start PTS Button 7 Black
Lexus IS F
RX PTS Button 10 Light Blue
(Smart Key)
TX PTS Button 9 Blue
2008
Brake Brake Switch 1 Red/Black
Push-To-Start PTS Button 7 White
Lexus LS 460
RX PTS Button 10 White
(Smart Key)
TX PTS Button 9 Orange
2007-2008
Brake Brake Switch 1 Blue
Push-To-Start PTS Button 7 White
Lexus LS 600h
RX PTS Button 10 White
(Smart Key)
TX PTS Button 9 Orange
2008
Brake Brake Switch 1 Blue
Push-To-Start PTS Button 7 Blue
Toyota Avalon
RX PTS Button 10 White
(Smart Key)
TX PTS Button 9 Gray
2008-2009
Brake Brake Switch 1 White
Toyota Land Push-To-Start PTS Button 7 Black
Cruiser RX PTS Button 10 Green
(Smart Key) TX PTS Button 9 Lt.Green
2008-2010 Brake Brake Switch 1 Red
Page 18
Installation Type 6
(-) Driver’s Door Trigger
86 87 85
This connection (+) 12V
is required to 87a
(-) Key Sense: Key Release: Connect to vehicle
shut the 30 Blue, pin 3 Pink, pin 5
Remote Start
Visit our website :
down when the www.directechs.com
Driver’s Door is for more information.
open. 1 2 3 4 5
Note: the OEM alarm (if equipped)
Black 5-pin Connector will arm/disarm with the lock/unlock
(at key port) wires. You need to configure the
remote starter to unlock the doors
before start, and relock after start.
Remote
Starter
Parking Lights
(-) Hood Input AC Tach Input
(-) Trunk Output
(+) Brake Input
(+) Starter Output
(+) 12V (+) Ignition Output/Input
(-) Ground (-) Ground (-) GWR (Status)
Hood Pin
(+) Brake: pin 1
(+) 12V (+) 12V: Red: 13 10: Blue/White: (-) GWR (Status) Input
(-) Ground (-) Ground: Black: 14
9: Pink: (+) Ignition Input
10
RX
DBALL/
4
7 6 5 4 3 2 1
Page 19
Wiring Reference Chart - Type 6
WARNING
- No takeover feature is available on Push-to-Start vehicles.
See Quick Reference Guide (QRG) at the end of this guide.
- To remote start the engine, all doors must be closed, including rear hatch.
Push-To-Start
Button
Brake
Switch
Page 20
Module Programming
Refer to the LED Diagnostics section on page 25 for more information and for troubleshooting purposes.
Important
Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to
ensure everything is correct prior to moving onto the next step.
Warning! To take advantage of advanced features, you must use XpressVIP 4.5 (and higher) or the Directechs Mobile app.
Flashing a module using your computer: Flashing a module using your smartphone or tablet
1. Connect the interface module to your computer using the 1. Connect the interface module to your XKLoader3.
XKLoader2. 2. Launch the Directechs Mobile app on your smartphone or
2. Go to www.directechs.com using Internet Explorer, and tablet.
select the Flash Module button. 3. Select FLASH YOUR MODULE and follow the on screen
3. Follow the instructions to select your vehicle, installation instructions.
type, and configure your options.
4. Once you have configured the firmware options, click on the
FLASH button.
When the flashing operation is successful, you can proceed with the programming instructions below.
D2D Installation in
D2D 0-pin 14-p 2-pin
1 1
If required for your installation, connect the 10-pin, 12-pin and 14-pin harnesses to th
4 3rd
the module, then connect the 4-pin D2D harness. 1
st
2nd
OR
W2W Installation in
D2D 0-pin 14-p 2-pin
1 1
If required for your installation, connect the 10-pin and 12-pin harnesses to the
3rd
module, then connect the 14-pin harness to the module. 1st 2nd
* If the LED starts to flash orange, it indicates the vehicle is equipped with a factory remote starter. Refer to
LED Diagnostics & Troubleshooting section for more information.
OFF
KEY AC
C
KEY
4
C
The module is now programmed. Remove the key from the ignition. AC
ON
Page 21
Module Programming
Method for Installation Types 2 & 3 vehicles: Push-To-Start (PTS) vehicles with CAN
Press the PTS button twice to turn the ignition ON. The LED
flashes red slowly for few seconds to indicate the key is in
learning mode. The LED turns ON solid green for 3 seconds, PUSH 2X
ENGINE
START
STOP & &
and then shuts OFF*.
2 Flashes Red
slowly
Solid Green
x3 secs.
* If the LED starts to flash orange, it indicates the vehicle is equipped with a factory remote starter. Refer to
LED Diagnostics & Troubleshooting section for more information.
3 The module is now programmed, press the PTS button once more to turn the
ignition OFF.
PUSH 1X
ENGINE
START
STOP &
Off
OFF
Insert the key in the ignition switch. The LED flashes KEY
IGN
OFF
KEY C
AC
4 The module is now programmed. Remove the key from the ignition. ON
Page 22
Module Programming
Method for Installation Types 5 & 6 vehicles: Push-To-Start (PTS) vehicles without CAN
Open the OEM key fob and remove the battery, then place the OEM key fob in front HO
LD
2 Battery
Press the PTS button twice to turn the ignition ON. The LED
3 flashes red slowly for few seconds to indicate the key is in
learning mode, then the LED turns ON solid green.
PUSH 2X
ENGINE
START
STOP &
Flashes Red
&
Solid Green
slowly
The module is now programmed, press the PTS button once more to turn
5 the ignition OFF.
PUSH 1X
ENGINE
START
STOP
Page 23
Module Reset
A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed
to the module using the web config tool will not be affected.
D2D Installation in
D2D 0-pin 14-p 2-pin
If required for your installation, connect the 10-pin, 12-pin & 1 1
14-pin harnesses to the module. Press and hold the 5
th 3rd
1
st
2nd
programming button, then connect the 4-pin D2D harness. 4th
1 OR
W2W Installation in
D2D 0-pin 14-p 2-pin
If required for your installation, connect the 10-pin & 12-pin 1 1
harnesses to the module. Press and hold the programming 4th
1
st
2nd
button, then connect the 14-pin harness to the module. 3rd
Wait 3 seconds until the LED turns ON solid orange then release the
2 programming button. The LED then turns ON solid red. & &
Solid Release Solid
Hard Reset
Warning Against Executing a Hard Reset!
A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings (such
as RFTD and D2D options) may have to be reconfigured. See the Feature & Option List section of this guide.
D2D Installation in
D2D 0-pin 14-p 2-pin
If required for your installation, connect the 10-pin, 12-pin & 1 1
14-pin harnesses to the module. Press and hold the 5th 3rd
1st 2nd
programming button, then connect the 4-pin D2D harness. 4th
1 OR
W2W Installation in
D2D 0-pin 14-p 2-pin
If required for your installation, connect the 10-pin & 12-pin 1 1
harnesses to the module. Press and hold the programming 4th
1st 2nd
button, then connect the 14-pin harness to the module. 3rd
Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds
2 until the LED starts to flash orange and red. &
Solid Flashes
3 Release the programming button. The LED turns ON solid red. &
Release Solid
Page 24
Feature & Option List
It is recommended to configure all the features and options listed below using the configuration tool found on the module
flashing page on www.directechs.com. The web offers more options; however, manual configuration of the features is possible
using the information on this page.
* Default option
Smart OEM Alarm Control will synchronize with the OEM alarm so that it will
disarm and rearm the vehicle in the remote start sequence, only when
5 Smart OEM Alarm Control required. The reason for this is, factory alarm control must often be done by
lock or unlock operation. This could create unnecessary actions on door lock
modules, such as the horn to honk. When possible, Smart OEM Alarm
3. Smart OEM Alarm Control* Control will monitor the alarm and door lock status to detect if the disarm or
rearm is required. If the vehicle is unlocked or is not equipped with factory
alarm, the disarm/rearm will not be executed. Smart OEM Alarm Control will
also monitor the remote starter actions so that the factory alarm control is not
done twice. A remote starter, for which the Safelock feature is active, will work
perfectly with this option and will make it invisible to the user.
Feature Programming
Programming
To enter feature programming routine Button
- For vehicles that are not Push-to-Start (PTS), use the key to turn the ignition ON, then OFF. For PTS vehicles, press the button twice to turn the
ignition ON, then press it once more to turn it OFF.
- Within 5 sec, press and HOLD the programming button. The orange LED turns ON after 3 seconds. Release the button.
- The green LED starts flashing slowly one time to indicate the feature number is 1. After a short delay, the red LED flashes rapidly to indicate the
current option of feature 1. It repeats until next action happens.
When the maximum number of feature or option is reached, the LED will starts flashing again from the first feature or option.
Page 25
LED Diagnostics & Troubleshooting
LED Status Description Troubleshooting
Programming the Module
Make sure the D2D harness is connected or that the 12 Volt is
Off Off Module has no power. present between the red and black wires. If the 12 Volt is present,
the module may be defective.
Waiting to begin the Refer to the wiring diagram to make sure that all the connections
Solid red Solid Red
programming sequence. are correct.
Can not connect. Wating for 5x Refer to the wiring diagram to make sure that CAN connections
Solid green Solid Green
IPB are correct.
Flashes
Flashes Red & IGNITION ON command Otherwise, the ignition signal was not received by the module. In
red &
orange
Orange received. a W2W install, it will show only if the ignition input wire is used.
Flashes Flashes Green Otherwise, the start signal was not received by the module.
green START ON command received.
quickly Quickly Refer to the wiring diagram to make the right connections.
Flashes Flashes Orange If the bypass module fails to flash, it means the module did not
orange TRUNK command received.
x3 x3 receive the signal. Commands can come from RF, D2D or W2W.
Page 26
Limited One Year Consumer Warranty
For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed
Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the
security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material
under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer;
and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the
following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete
product and Part description.
This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its
intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or
other causes not arising out of defect in materials or construction.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING
BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY,
FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL
PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY
PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS
PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF
THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. DIRECTED IS NOT OFFERING A GUARANTEE OR
INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS,
AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION,
LIABILITY FOR THEFT, DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING
DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF
CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE
DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED
TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE
RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL
DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL
LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE
MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE
PART AS DESCRIBED ABOVE.
This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of
America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. Some states do not allow limitations
on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty
gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has
not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.
For further details relating to warranty information of Directed products, please visit the support section of DIRECTED’s
website at: www.directed.com
920-10012-01 2013-07
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select
vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no
circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any
consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor
will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data
bus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this
product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes
any representative or other person to assume for it any obligation or liability other than the replacement of this product only.
Protected by U.S. Patents: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876
B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1;
7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; Cdn. Patent:
2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089; European
Patent: 1,053,128; Pat. Pending: 2,291,306. Made in Canada.
* This output is configurable. see your authorized installation center for more
information.