This document provides 18 questions and answers related to API 653 for tank inspection and repair. Key points addressed include:
1. Calculating minimum shell plate thickness
2. Maximum allowable stresses for shell courses and reconstructed tanks
3. Requirements for changing tank service above 200°F
4. Records that must be maintained by owners/operators
5. Material specifications for structural materials
This document provides 18 questions and answers related to API 653 for tank inspection and repair. Key points addressed include:
1. Calculating minimum shell plate thickness
2. Maximum allowable stresses for shell courses and reconstructed tanks
3. Requirements for changing tank service above 200°F
4. Records that must be maintained by owners/operators
5. Material specifications for structural materials
This document provides 18 questions and answers related to API 653 for tank inspection and repair. Key points addressed include:
1. Calculating minimum shell plate thickness
2. Maximum allowable stresses for shell courses and reconstructed tanks
3. Requirements for changing tank service above 200°F
4. Records that must be maintained by owners/operators
5. Material specifications for structural materials
This document provides 18 questions and answers related to API 653 for tank inspection and repair. Key points addressed include:
1. Calculating minimum shell plate thickness
2. Maximum allowable stresses for shell courses and reconstructed tanks
3. Requirements for changing tank service above 200°F
4. Records that must be maintained by owners/operators
5. Material specifications for structural materials
IMPORTANT OPEN BOOK QUESTIONS API 653 Fourth edition, Apr. 2009, ADDENDUM 1, AUGUST 2010 No. QUESTION Answer CODE CLAUSE Tmin=2.6 (H – 1)DG/ 1 Calculate the t min. welded tank shell SE API653 4.3.3.1 2 What is the maximum allowable stress for shell Table 4.1 courses 4.3.3.1 & API653 (Allowable product stress, S & Allowable Hydrostatic 4.3.3.2 test stress, St) 3. To change the service of the tank to above 200°F All what requirements are to be met requirements of 4.2.4.3 & API653 API 650, 4.3.10.2 Appendix M 4. What is the maximum allowable stress for API650 Table 5-2 reconstructed tank 5. What is the maximum allowable stress for revited Table 4.1 API653 4.3.4.1 tank S is 21,000 lbf/in2 6. Annular bottom plate thickness (Sp. Gr. < 1.0) API653 Table 4-5 7. Assessment of the safe use of a tank constructed of Fig. 5.2 API653 5.3.8 unknown materials 8. What records shall be maintained by the Owner / Construction Operator records, inspection API653 6.8.1 history, and repair/alteratio n history. 9. What are the material specifications for structural ASTM A36 or materials ASTM A992 as API653 7.3.2 a minimum 10. Shell design for a reconstructed tank, with materials the lesser of whose allowable stresses are not given in Table 5-2 3/4 yield API653 8.4.3 of API 650, what allowable stresses are to be taken strength or 3/7 tensile strength 11. After the valve has been installed on the flange at P(psi) = 1.5 H2Gγw API653 9.14.5.3 what pressure the pressure test shall be performed 12. In tank re-construction, new vertical joints in 5t, where t is adjacent shell courses shall be offset by what the plate minimum distance thickness of the thicker API653 10.4.2.1 course at the point of the offset
Eng. Zakarya Hiba
Zakaryahiba@hotmail.com 002 0105313394 Professional Training and Consultation
API 653 Preparatory July 2011
13. During tank reconstruction / repair what is the API 650,
maximum allowed undercutting for vertical joints Section 7.2.1.4 API653 10.4.2.5 and Section 8.5.1 b 0.4 mm (1/64 API650 8.5.1 b in.) in depth 14. What is the maximum reinforcement allowed for 3/16 in. API653 Table 10-1 horizontal joint of ¾” plate 15. In completed horizontal butt joints, the upper plate more than 20 % shall not project beyond the lower plate by how of the thickness API653 10.4.4.2 much of the upper plate 16. Calculation of Internal Bottom settlement or bulges BB = 0.37 R API653 B.3.3 17. Problem on edge settlement API653 Fig B-10 18. For welding A516 Gr 70 materials what electrode E60 and E70 classification shall be used classification API650 4.8.1 series