Professional Documents
Culture Documents
Clean Pump Design and MTO Rev D
Clean Pump Design and MTO Rev D
above grade
Ø Bar 6 @ 12 inches Crs. EW T&B Concrete density γ 144 kN/m³
12 mm
Soil density γ 0 kN/m³
PUMP FOUNDATION DESIGN Allowable bearing Cap 2000 kN/m²
Increase pump frame
compacted stone layer Grade EL on width size by (see #) 4 mm
Design Methodology Used. (a combined Rule of Thumb & Equivalent Static Method). on length size by (see #) 1 mm
1. Take the pump size and increase all round by user inputted amounts. Note Concrete Slab 6 mm Ht above grade 12 mm
2. Take the pump wt and multiply by 3 to 5 for a suitable mass of concrete. these fields are typ for all Depth to frost line 60 mm
3. Max base pressure is based on the Total Vert loads + 25% Total Vert load 12 mm oversize all around Angle for excavation 45 deg
as a Horiz force @ ½ the base thk'ness above Top of Conc, (as a moment). Z User input Re-bar extra 10% Over-excavate round by 12 mm
4. User inputted Plinth/pedestal ht above grade and min frost depths. Mud mat thk'ness 2 mm
5. The spread sheet calculates the min depth of concrete required. 45º Angle of Excavation Stone thk below slab 4 mm
6. The output size is re-caculated to the nearest 100mm. Grade slab Thk'ness 6 mm
Set soil γ = 0, for 'Gross' Base Pressure, else input soil
Mud Mat Thk'ness 2 mm density value for a 'Net' Base Pressure.
PUMP INPUT INFO FOR DESIGN
Min Depth Min depth due Gross
Pump Vol of Concrete
Pump Size (LxW) Design Size (LxW) Pump Wt Design Wt below grade by design by rules for frost USED!! Base Pressure
Wt Factor
Item # mm mm mm mm kN kN mm mm mm mm mm kN/m² base ch'k m³
[1] 5-2-G-4 english 108.661 54.527 111 63 4646.2 3 13939 13842204 13842216 604 72 13842216 2707875 NOT OK!! 96.8
[2]
[3]
[4]
[5]
[6]
CLIENT
Your Company Name Here 0
Your Company Address here
0 PROJECT
Tele No. 0
Fax No.
JOB NO. SUBJECT DATE BY CHECKED
0 Typical Pump Foundation Design & M.T.O 13/05/2010 PR
2" MIN MUD MAT LEAN MIX CONCRETE, TO
FORM LEVEL SURFACE TO BUILD FROM
AND TO PROTECT THE NEWLY CUT
SURFACE.
PUMP FRAME
EQ
LEVELING SCREW OR SHIM
EQ