Professional Documents
Culture Documents
CF Pump
CF Pump
01
Objective:
To investigate the characteristics of Centrifugal pump.
Experimental Setup:
Multi pump test Bench
Experimental Procedure:
1. Check that he circulation tank is filled with water.
2. Switch on the main power supply.
3. Turn on the pump and slowly open Flow control valve until maximum flow rate is
achieved.
4. Ensure that all setting follows the equipment set-up.
5. Note down flow rate and pressures.
6. Test the pump characteristics by changing the flow rate.
7. Turn off the pump.
8. Switch off the main power supply.
Formulae:
Graphs:
Plot following graphs using data