09K in PDF

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

T R A N S M IS S ION PART S

Instructions

Jatco/Nissan
JF010E (REOF09A/RE0F09B), JF011E (REOF10A)
Oversized Primary
Pressure Regulator JF010E Main
Valve Body

Valve Kit TOOL

R
EQ
D

UIRE

Part No.
113741-09K Valve

• Valve
• Spring
• End Plug
Spring
NOTE: Also fits Mitsubishi F1CJA.
Tool KIt End Plug

Tool Kit
Part No.
F-113741-TL9
• Reamer JF011E Main
1. Disassembly Valve Body
• Reamer Jig a. Remove and discard OE valve,
• Guide Pin spring and end plug.
NOTE: Sonnax “F-Tool” kits designed to b. Set aside OE retainer for reuse.
service a specific bore require the VB-FIX,
Figure 1
a self-aligning valve body reaming fixture. 2. Bore Reaming
More information and instructions can be Ream primary pressure regulator bore 20
15
10

found online at www.sonnax.com. (for reaming instructions/reamer care, please 25


30 0
5

VACUUM

visit www.sonnax.com). Sonnax reaming tool


TEST

kit F-113741-TL9 and VB-FIX are required 18"-Hg

for this operation.

3. Installation & Assembly JF010E


a. Remove all debris from valve bore and body. Main
Valve Body
b. Install Sonnax valve.
c. Install Sonnax spring.
Figure 2
d. Install Sonnax end plug, with the boss end
of plug inboard. Ensure spring seats over 20
15
10

end plug boss.


25 5
30 0
VACUUM
TEST

e. Reinstall OE retaining clip. 18"-Hg

4. Final Testing
Vacuum testing at the port(s) indicated holds JF011E
the recommended minimum 18 in-Hg Main
Valve Body
(Figures 1 & 2).

©2019 Sonnax Transmission Company, Inc. • A Marmon / Berkshire Hathaway Company 113741-09K-IN 02-21-19


800-843-2600 • 802-463-9722 • F: 802-463-4059 • www.sonnax.com

You might also like