clothing high levels of radiant heat. Aluminized fabric is constructed with a flame resistant base layer, and an aluminium film is bonded to the surface. 3. Heat Resistant Gloves to protect workers’ hands from burns or other injuries that can result from coming into contact with extremely hot objects, working near sparks or flames, or from being exposed to high temperatures in the workplace. 4. Safety boot It prevents from getting foot injuries due to slippery surface, heavy falling or rolling objects, sharp piercing edges and etc. List of tool No. Name Function Figure 1 Spoon and gate cutter spoon-shaped ends and are used to slick rounded surfaces in a mold
A gate cutter is used for
cutting the gate in the mould which acts as a passage for the hot metal. 2 Hand rammer used for ramming or packing the sand in the moulding box. It has two parts peen and butt
3 Sprue cutter used for creating a run-
through or sprue for the molten metal in the cope.
4 Riddle A riddle is used for cleaning
the moulding sand. It removes the unwanted material like metal scrap, iron and other metal parts, pebbles etc.