Professional Documents
Culture Documents
Spec Sheet - Cat 3176C Propulsion
Spec Sheet - Cat 3176C Propulsion
Spec Sheet - Cat 3176C Propulsion
DIMENSIONS
1005 mm
39.5 in
1543 mm 966 mm
60.8 in 38.0 in
STANDARD EQUIPMENT
Air inlet system Governor
aftercooler electronic control system
air cleaner/fumes disposal (closed system) Lube system
Cooling system crankcase breather
thermostat oil cooler
jacket water pump oil filter
sea water pump oil pan, center sump
integral heat exchanger/expansion tank oil filler
Exhaust system dipstick
manifold & turbocharger, water cooled oil pump
152 mm (6 in) round flanged outlet Mounting system
Flywheel & flywheel housing front support
SAE No. 1 Power take-offs
Fuel system hydraulic pump drive — SAE A, 11 tooth spline
fuel filter Service
fuel transfer pump service per top level PAs
fuel priming pump
flexible fuel lines
Power produced at the flywheel will be within standard tolerances up to 50° C (122° F)
combustion air temperature measured at the air cleaner inlet, and fuel temperature up
to 70° C (158° F) measured at the fuel filter base. Power rated in accordance with
NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller
shaft power.
3176C MARINE ENGINE — 448 bkW
PERFORMANCE CURVES
Cubic Prop Demand Curve Data
TMI — DM3388-00
(for displacement hulls only) Max Power Curve Data
E Rating – 2300 rpm
448 bkW (600 bhp) 608 mhp Fuel Fuel Fuel Fuel
Speed Power Torque Cons Rate Power Torque Cons Rate
600
425 rpm
______ bkW N•m g/bkW-hr L/hr
________________________________ bkW N•m g/bkW-hr L/hr
___________________________________
500 2300 448 1858 227 121.3 448 1858 227 121.3
bkW
Power
400
2000 448 2137 217 115.8 294 1405 204 71.6
300 220
1800 448 2374 218 116.2 215 1138 206 52.6
200 1600 429 2561 219 111.8 151 899 213 38.2
1400 312 2128 218 81.2 101 688 220 26.5
100
1200 187 1487 221 49.1 64 506 223 16.9
15 1000 99 941 222 26.1 37 351 232 10.2
2550
1800
1600 Fuel Fuel Fuel Fuel
Speed Power Torque Cons Rate Power Torque Cons Rate
N•m
Torque
1400
lb-ft
1200
1000 1375 rpm
______ bhp lb-ft lb/bhp-hr g/hr
________________________________ bhp lb-ft lb/bhp-hr g/hr
___________________________________
800
600 2300 600 1370 .374 32.0 600 1370 .374 32.0
400 2200 600 1433 .366 31.4 525 1254 .352 26.4
200 2000 600 1576 .357 30.6 395 1036 .336 18.9
Cons. Rate
200
125
30 1600 575 1889 .359 29.5 202 663 .350 10.1
L/hr
20 75
10
1400 418 1570 .359 21.5 135 507 .362 7.0
25
1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
1200 251 1097 .362 13.0 85 373 .366 4.5
1000 132 694 .366 6.9 49 259 .381 2.7
Engine Speed rpm
E RATING – Planing hull vessels such as pleasure craft, harbor patrol, harbor
master, and some fishing and pilot boats.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHM7758-01 (10-99) Printed in U.S.A. © 1999 Caterpillar Inc.
All rights reserved.