Professional Documents
Culture Documents
rbc50 - 600exrb60 FT en 2
rbc50 - 600exrb60 FT en 2
rbc50 - 600exrb60 FT en 2
Technical datasheet
RB C50-FT-EN-02
GENERAL DESCRIPTION
2
1. Painted (RAL 7016 - Anthracite grey) steel mobile obstacle
(FE 370) diameter around 275 mm, 6 mm thick. The
obstacle is available in three finishing options *: Painted
3 steel, painted stainless steel or brushed stainless steel.
2. Anti-skid cast aluminium crown (RAL 9006 - White
aluminium). The upper crown is also available with LED
indicator lights (on the perimeter of the crown).*
1 3. Double white reflective strip on the upper part of the
obstacle, 55 mm height.
4. Thick steel supporting structure.
8
5. Cast aluminium cover plate and link frame between
the obstacle and the road surface (mounted onto the
5 embedded casing).
6. Galvanized sheet steel embedded casing.
7. Mobile obstacle is held vertically and reinforced by
means of a thick steel collar connected to the supporting
4 structure and a built-in nylon bush and sliding along the
central jack.
6 7 8. Synthetic joint.
9. Double-acting central hydraulic jack for rising and lowering
.
Non contractual picture
the obstacle. In order to limit damage caused by moderate
impacts, the obstacle is not fixed to the jack.
The RB C50 automatic rising obstacles were designed to
10. Hydraulic unit mounted on the supporting structure. Lower
protect and control access to sensitive sites.
hydraulic pressure during rising of the obstacle to allow a
This kind of equipment can be used on any site to create a reversal movement if an obstacle > 40 kg is detected.
retractable obstacle to control the vehicles traffic without Full pressure is applied during the final 10 cm of the rising
restricting pedestrian access. cycle and in the up position.
In urban environments, the RB C50 obstacles offer the 11. The hydraulic pump is automatically switched off in the up
advantage of being completely invisible when lowered. position by receiving a pressure switch signal.
They are also well-suited for controlling vehicles access to 12. Steel/rubber bearings support the obstacle in low position,
pedestrian areas. allowing it to withstand the passage of heavy vehicles.
The retractable obstacles are available with two cylinder 13. Inductive sensor delivers to the logic control board a low
heights from floor level, with two different code references: position status information.
600mm (RB C50_600) or 800mm (RB C50_800). 14. A remote microprocessor control board is located in a
cubicle separated from the obstacle (10 m of electric cable
provided). The features include dipswitches to modify the
settings, LED display for obstacle status information and
inputs/outputs level.
* Product configuration to be specified when ordering.
RB C50
Datasheet
RB C50-FT-EN-02
600
560
40
560
900
STANDARD DIMENSIONS (mm) FOR RB C50_800
d
800
560
40
560
1100
d
Painted steel cylinder Ø 271 mm
Stainless steel cylinder Ø 273 mm
Belgium
Automatic Systems SA (Bruxelles & Wallonie) Automatic Systems Vlaanderen
5 avenue Mercator Prins Boudewijnlaan 17 Unit 9A
1300 Wavre - Belgique 2550 Kontich - Belgïe
Tel.: +32.(0)10.23.02.11 Tel.: +32.(0)3.870.59.59
Email: sales.be@automatic-systems.com Email: sales.be@automatic-systems.com
France
Automatic Systems SAS - Persan Automatic Systems SAS - Suresnes
22, rue du 8 mai 1945 3 Rue Salomon De Rothschild
95340 Persan – France 92150 Suresnes
Tel.: +33.(0)1.30.28.95.50 Tel.: +33.(0)1.41.11.40.20
Email: sales.fr@automatic-systems.com Email: sales.fr@automatic-systems.com
Automatic Systems SAS - Lyon
Immeuble Le Québec
685, rue Juliette Récamier
69970 Chaponnay - France
Tel.: +33.(0)1.30.28.95.50
Email: sales.fr@automatic-systems.com
Spain
Automatic Systems Española SAU Automatic Systems Española SAU
Calle Bolivar, n° 24 Portal B 2° D Calle Vallés, 52-54 - El Prat de Llobregat
28045 Madrid - España 08820 Barcelona - España
Tel.: +34.(0)91.659.07.66 Tel.: +34.(0)93.478.77.55
Email: sales.ca@automatic-systems.com
Great Britain
Automatic Systems Equipment UK Ltd.
Units 18 - 19 Babbage House
Northampton Science Park
Kings Park Road
Northampton
NN3 6LG - UK
Tel.: +44 (0)16.04.65.42.10
Email: sales.uk@automatic-systems.com