Professional Documents
Culture Documents
Part Number: H001Ssc800 Description: Forester PND Navi. Audio Unit
Part Number: H001Ssc800 Description: Forester PND Navi. Audio Unit
installation instructions
Description: Forester PND Navi. Audio Unit
kit contents:
A
U
D
IO
V OW
ID
E
O ER
Item QTY Description
&
N MA
N
13
A
V
IG U
S
A AL
T
IO
N
N
20
S
Y
S
T
E
15
M
1 1 Audio Head Unit w/label 1
2 1 Audio Cover 19
3 1 Portable Navi. Device (PND)
4 1 Pouch for PND
17
5 1 Main harness 18
6 1 Secondary harness 4
7 1 radio antenna adapter Harness 2
8 1 iPod harness (dock cable) 10 11
9 1 GPS Antenna w/ harness
10 1 GPS Antenna Screw 8 14
11 9 Cable Tie
12 1 Grommet for ipod 3 12 16
13 1 Installation Spacer
14 8 M5 Bolt (4 in kit, 4 on radio)
15 1 Owners Manual
16 1 Foam Tape
TOM TOM In-Box Kit 7
17 1 Tom Tom CD Manual
18 1 USB Cable
6
19 1 PND Back Cover
5
20 1 PND Quick Start Guide
9 not in kit
21
tools required:
1“
10mm
1-1/4” (31.7mm)
Punch
OR
1-1/4” (31.7mm)
Hole Saw
meaning of characters:
: Install : Loosen
: Disconnect :Discard
: Connect
# Description
1 GPS Antenna W/ Bracket and Harness
2 Secondary Harness
3 iPod Harness (dock cable)
4 USB/AUX Module (Available from subaru (pn: H621saj220)
5 Radio Antenna Adapter Harness
6 Main Harness
Disassembly OverView
# Part Name
1 Radio Trim
2 Radio Cover Plate & Pocket
3 Center Console
4 Gear Shift Trim
5 Ip Trim
6 Instrument Panel Unit (IP Unit)
• Before starting this installation make sure that the Vehicle is on a flat surface. Failing to
do so could result in damages to the vehicle, to you, and/or others.
• Take care of all disassembled vehicle components as they will be reinstalled ( ) into
the vehicle, unless noted ( ) and instructed differently. Use blankets, tape, and other
protective items to avoid scratching components that may/will come in contact with
tools or sharp surfaces.
1-1.
I. Pre-Install
1. Affix the Installation Spacer [13]
to the Audio Unit [1] as shown.
-- Apply pressure across the entire part to
seat the adhesive.
CAUTION: Do not touch the surface
of the radio where the Spacer will be
adhered.
CAUTION: Align the edge of the
Spacer with the seam in the Audio
Unit.
1-2.
)
)
cm
cm
.0 2”
.0 2”
(2 2.5
Tape [16].
(5
(5
II. Disassembly
1. Place the Vehicle into Park “P”
with the Parking Brake set.
2-2.
(1) (2)
2-3.
4. Remove 4 Screws.
(1)
2-5.
2-6.
2-8.
2-9.
2-11.
2-12.
2-14.
2-15.
2-17.
2-18.
3-2.
4-1.
4-3.
4-5.
4-7.
4-8.
4-10.
4-11.
4-13.
4-14.
4-16.
4-17.
5-2.
5-3.
5-5.
5-6.
5-8.
5-9.
□ AM/FM
Check Radio Reception.
VERIFY: That radio receives both AM/FM stations clearly.
□ Rearview Camera
Shift Vehicle to reverse (R) position.
VERIFY: That the Rearview Camera image is displayed.
□ Illumination Dimming
Adjust Vehicle’s Illumination dimmer switch.
VERIFY: That the PND Navigation Unit dims accordingly.
□ GPS signal
View Map Screen.
□ USB
Connect USB memory Device and play audio.
VERIFY: That music plays from the Memory Device.
□ AUX
Connect an MP3 player to the auxiliary port.
VERIFY: That music plays from the MP3 Player.
□
Connect an iPod to the iPod docking Cable.
iPod/Video VERIFY: w/Parking Brake ON Video Plays,
VERIFY: w/Parking Brake OFF Screen Turns Blue, Audio still plays.