Chain Hoist Inspection and Main Towing Gear

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Vessel name MCL PERMAI Customer

Vessel code Ref No


Order no Actual job NO
Cost centre Type of Work

EXAMINATION REPORT

• Inspection of two units of 10 tons chain hoists used in deployment and recovery of the ramp
door.
o All the chains were visually inspected and later tested if they were able to lift up the
ramp.
o Every chain hoist was found to be working properly as they were able to rise and lower
the ramp without any difficulty.
Vessel name MCL PERMAI Customer
Vessel code Ref No
Order no Actual job NO
Cost centre Type of Work

EXAMINATION REPORT

• Inspection of the main towing gear arrangement from the smit brackets up to towing bridles
with the shackles.
o The main towing gear from the smit brackets was visually inspected and later tested if it
functions well.
o It was found that, the main towing gear arrangement from smit brackets up to towing
bridles with the shackles was working properly.

You might also like