Professional Documents
Culture Documents
Ips Led Monitor Led LCD Monitor (Led Monitor ) : Owner's Manual
Ips Led Monitor Led LCD Monitor (Led Monitor ) : Owner's Manual
Ips Led Monitor Led LCD Monitor (Led Monitor ) : Owner's Manual
www.lg.com
2 TABLE OF CONTENTS
CONTENTS
ENGLISH
ENG
3 LICENSE 28 TROUBLESHOOTING
17 CUSTOMIZING SETTINGS
18 Customizing Settings
18 - Menu Settings
20 - Picture
21 - Color
22 - Display
22 - Audio
23 - Others
24 READER Setting
25 FUNC. Setting
25 - SMART ENERGY SAVING
26 - Picture Mode
27 - Color Weakness
LICENSE 3
ENGLISH
LICENSE
ENG
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to
meet the ErP Directive:
*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjust-
ment to display.
*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4 ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
D-SUB Cable
CD(Owner's Manual) /
( This cable is not included in all
Card
countries. )
or
DVI-D Cable
Stand Body Stand Base
HDMI Cable
CAUTION
ENGLISH
Do not use any unapproved accessories to ensure the safety and product life span.
yy
ENG
Any damages or injuries by using unapproved accessories are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
6 ASSEMBLING AND PREPARING
Power Indicator
yyLighting On: Turned on
yyLighting Off: Turned off
(Power Button)
ENGLISH
When moving or lifting the monitor, follow these
ENG
instructions to prevent the monitor from being scratched.
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
CAUTION
monitor set.
1 Place the Monitor set with the screen side
down on a flat and cushioned surface. 3 Attach the Stand Base.
4 Tighten the screw to the right with a coin.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
16M38A
Stand Body
Stand Base
Stand Body
19M38A 20M38A 22M38A 24M38A
19M38D 20M38D 22M38D 24M38D
20M38H 22M38H 24M38H
Stand Base
ASSEMBLING AND PREPARING 9
ENGLISH
1 Place the Monitor set with the screen side
ENG
down on a flat and cushioned surface.
16M38A
Stand Body
Stand Base
Stand Base
Stand Body
Stand Base
10 ASSEMBLING AND PREPARING
27MP38VQ 27MP38HQ
ENGLISH
Stand Body
Stand Base
Stand Body
CAUTION
ENGLISH
1 Lift and tilt the Monitor set into its upright
ENG
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
CAUTION
10 cm
10 cm
Cable holder
or
12 ASSEMBLING AND PREPARING
When you adjust the angle, do not hold the located at the back of the Monitor set. For more
ENG
bottom of the Monitor set frame as shown on information of installation and using, refer to the
the following illustration, as may injure your manual supplied with the Kensington security
fingers. system or visit http://www.kensington.com .
NOTE
Tilt from +20 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
Front Rear
ASSEMBLING AND PREPARING 13
Wall Mount (A x B)
yy
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm
ENGLISH
A B
ENG
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
CAUTION
Setup Guide.
Disconnect the power cord first, and then
yy
move or install the Monitor set. Otherwise
10 cm electric shock may occur.
If you install the Monitor set on a ceiling or
yy
10 cm slanted wall, it may fall and result in severe
10 cm injury.
Use only an authorized LG wall mount
yy
10 cm
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void
your warranty.
yy Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
yy Screw length from outer surface of back
cover should be under 8mm.
Wall mount Pad
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall Back Cover
mounting interface (optional parts), attach it
carefully so it will not drop.
1 If you use screw longer than standard, the moni- Wall mount Pad
tor might be damaged internally. Back Cover
2 If you use improper screw, the product might be Standard screw
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it. Max.8mm
Wall Mount (A 75 x 75 Use the screws that are listed on the VESA
yy
x B) standard screw specifications.
Standard M4 The wall mount kit will include an installation
yy
screw
manual and necessary parts.
Number of 4
screws The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
Model 24M38A 27MP38VQ 24M38H dealer.
24M38D 27MP38HQ
The length of screws may differ depending
yy
Wall Mount (A 100 x 100
x B) on the wall mount. Be sure to use the proper
Standard M4 length.
screw For more information, refer to the
yy
Number of 4 instructions supplied with the wall mount.
screws
14 USING THE MONITOR SET
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
D-SUB
CAUTION
Connect the signal input cable
yy
RGB OUT
PC and tighten it by turning the
screws clockwise.
Do not press the screen with
yy
your finger for a long time as this may
NOTE result in temporary distortion on the screen.
Avoid displaying a fixed image on the
yy
When using a D-Sub signal input cable
yy screen for a long period of time to prevent
connector for Macintosh image burn. Use a screensaver if possible.
Mac adapter
yy
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
USING THE MONITOR SET 15
ENGLISH
HDMI connection
ENG
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in Transmits the digital video and audio signals from
the following illustrations. your AV devices to the monitor. Connect your AV
device to the monitor with the HDMI cable as il-
lustrated below.
NOTE
NOTE
yyIf you use HDMI PC, it can cause compatibility
problem.
yyIf you use HDMI PC, it can cause compatibility
yyUse a certified cable with the HDMI logo
problem.
attached. If you do not use a certified HDMI
yyUse a certified cable with the HDMI logo
cable, the screen may not display or a
attached. If you do not use a certified HDMI
connection error may occur.
cable, the screen may not display or a
yyRecommended HDMI cable types
connection error may occur.
- High-Speed HDMI®/TM Cable
yyRecommended HDMI cable types
- High-Speed HDMI®/TM Cable with Ethernet
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
NOTE
When you want to use two PC in our Monitor,
yy
please connect the signal cable(D-SUB/
DVI-D/HDMI) respectively in Monitor set.
If you turn the Monitor set on while it is cold,
yy
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
16 USING THE MONITOR SET
Peripheral device connection turn the power on. When monitor power is turned
ENG
NOTE
NOTE
CUSTOMIZING SETTINGS
ENGLISH
ENG
1 Press the desired button on the bottom of the Monitor set.
2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow ( ) button.
3 Select EXIT to leave the OSD menu.
Button Description
Accesses the main menus.(See p.18)
OSD Locked/OSD This function allow you to lock the current control settings, so that
Unlocked they cannot be inadvertently changed.
Press and hold the MENU button for several seconds. Then OSD
of “OSD Lock” will appear. After that, user can select lock or unlock
by pressing left/right button.
If user selects the “Lock” icon by pressing the “OK” button, the
message “OSD Locked” will appear. Otherwise, “OSD Unlocked”
will appear. After selecting the “Lock”, If you want to change to
Unlock, you can push the “MENU” button for several seconds. The
message “OSD Unlocked” will appear.
Use this button to enter Reader Mode menu. Its function works to display screen as
paper-like picture for Eye comfort.If you want to more information(See p.24).
Use this button to enter SMART ENERGY SAVING , Picture Mode,Color Weakness
menus.(See p.25~27)
When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only supported in Analog Mode)
The best display 16M38A/19M38A/19M38D: 1366 x 768
mode 20M38A/20M38D/20M38H: 1600 x 900
22M38A/22M38D/22M38H/24M38A/24M38D/24M38H/27MP38HQ/
27MP38VQ: 1920 x 1080
You can choose the input signal.
• When two input signals are connected, you can select the input signal (D-SUB/DVI-D/
HDMI) you want.
• When only one signal is connected, it is automatically detected. The default setting is
D-SUB.
EXIT
EXIT the OSD(On Screen Display).
(Power Button) Turns the power on or off.
Power Indicator The power indicator stays white if the display is running properly (On
Mode). If the display is in Sleep Mode, the power indicator blinks
white.
18 CUSTOMIZING SETTINGS
Customizing Settings
ENGLISH
Menu Settings
ENG
Wide/Original Wide
Switch to full screen mode according to input image signal.
● ● ● Original
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor
set ratio (16:9).
Reset Restore all factory default settings. Press the◄ , ►buttons to reset
● ● ●
immediately.
CUSTOMIZING SETTINGS 19
ENGLISH
screen
ENG
Black Level
Over Scan
Color Gamma
Color Temp
Six Color
27MP38VQ 27MP38HQ
To customize
● ● ● the color of the
screen
Color Reset
27MP38VQ 27MP38HQ
Clock To improve
the clarity and
●
stability of the
Phase
screen
Audio
20M38H 22M38H
To adjust the
24M38H Volume ●
volume
27MP38VQ 27MP38HQ
Others Language
● ● ●
Power Indicator
Automatic Standby
20M38H 22M38H
24M38H To customize
● ● ● the screen
27MP38VQ 27MP38HQ
status for a
user's operating
environment
Resolution
Picture
ENGLISH
Over Scan To select the range of output image for DTV timing in HDMI input.(only for HDMI
input)Recommend overscan function to turn on when connect AV equipment.
20M38H 22M38H
24M38H
27MP38VQ 27MP38HQ
CUSTOMIZING SETTINGS 21
Color
ENGLISH
1 Press MENU button on the bottom of the Monitor set
ENG
to display the Menu OSD.
Display
ENGLISH
Audio
20M38H 22M38H 24M38H
27MP38VQ 27MP38HQ
Others
ENGLISH
1 Press MENU button on the bottom of the Monitor set
ENG
to display the Menu OSD.
20M38H 22M38H
24M38H
27MP38VQ 27MP38HQ
Resolution User can set the desired resolution. The function is enabled only when the screen
resolution on your computer is set to the following, except that the PC output wrong
resolution.
19M38A 19M38D Off, 1024x768, 1280x768, 1360x768,
1366x768
Off, 1024x768, 1280x768, 1360x768,
20M38A 22M38A 24M38A 27MP38VQ 1366x768
20M38D 22M38D 24M38D 27MP38HQ
Off, 1280x960, 1600x900
20M38H 22M38H 24M38H
Off, 1440x900, 1600x900
24 CUSTOMIZING SETTINGS
READER Setting
ENGLISH
NOTE
If option of Reader Mode is Reader 1 or Reader 2, Picture Mode will automatically be Custom and
SMART ENERGY SAVING and Color Weakness will automatically be Off.
CUSTOMIZING SETTINGS 25
FUNC. Setting
ENGLISH
SMART ENERGY SAVING
ENG
1 Press FUNC. button on the bottom of the Monitor set to
display the FUNC. OSD.
NOTE
yyTOTAL POWER REDUCTION: How much power is saved while using the monitor.
yyTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
yySaving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
yyIf option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and
Reader Mode and Color Weakness will automatically be Off.
26 CUSTOMIZING SETTINGS
ENGLISH
ENG
Picture Mode
NOTE
If option of Picture Mode is non-Custom , Reader Mode, SMART ENERGY SAVING and Color
Weakness will automatically be Off.
CUSTOMIZING SETTINGS 27
Color Weakness
ENGLISH
ENG
1 Press FUNC. button on the bottom of the Monitor set
to display the FUNC. OSD.
NOTE
This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please
yy
turn off this function.
This function can’t distinguish some colors in some images.
yy
If option of Color Weakness is not Off , Reader Mode and SMART ENERGY SAVING will be Off and
yy
Picture Mode will automatically be Custom.
28 TROUBLESHOOTING
TROUBLESHOOTING
ENGLISH
ENG
CAUTION
ENGLISH
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
yy
ENG
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
yy
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
yy
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display yy Be sure to install the display driver from the display driver CD (or
driver? diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
30 SPECIFICATIONS
SPECIFICATIONS
ENGLISH
ENG
16M38A
Display Screen Type Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch 0.252 mm x 0.252 mm (Pixel Pitch)
Resolution Max 1366 x 768 @ 60 Hz
Recommend VESA 1366 x 768 @ 60 Hz
Power consump- On Mode : 5 W (ENERGY STAR® standard)*
tion (Typ.) Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input 19 V 0.8 A
AC-DC Adapter Type ADS-18SG-19-3 19016G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPG, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPI, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPCU, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPB, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016EPCU-L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP42, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-U, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP60-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT: 19 V 0.84 A
Dimensions With Stand 374.2 mm x 310.0 mm x 167.9 mm
(Width x Height x Without Stand 374.2 mm x 247.5 mm x 57.3 mm
Depth)
Weight 1.1 kg
Tilt Range -5° to 20°
Environmental Operating Temperature 0 °C to 40 °C
conditions Operating Humidity ≤ 80 %
Storage Temperature -20°C to 60 °C
Storage Humidity ≤ 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS 31
16M38A
Video Signal Horizontal Frequency 30 kHz to 83 kHz (Automatic)
ENGLISH
ENG
30 kHz to 53 kHz (Automatic) ●
Vertical Frequency 56 Hz to 63 Hz (D-SUB) ●
56 Hz to 75 Hz (DVI-D)
56 Hz to 61 Hz (HDMI)
Synchronization Separate Sync. ●
Digital
Input Connector 15 pin D-SUB Connector ●
DVI-D Connector (Digital)
HDMI Connector
32 SPECIFICATIONS
SPECIFICATIONS
ENGLISH
ENG
19M38A 19M38D
Display Screen Type Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch)
Resolution Max 1366 x 768 @ 60 Hz
Recommend VESA 1366 x 768 @ 60 Hz
Power consump- On Mode : 13 W (ENERGY STAR® standard)*
tion (Typ.) Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input 19 V 0.8 A
AC-DC Adapter Type ADS-18SG-19-3 19016G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPG, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPI, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPCU, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPB, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016EPCU-L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP42, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-U, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP60-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT: 19 V 0.84 A
Dimensions With Stand 441.3 mm x 350.2 mm x 167.8 mm
(Width x Height x Without Stand 441.3 mm x 278.1 mm x 57.3 mm
Depth)
Weight 1.9 kg
Tilt Range -5° to 20°
Environmental Operating Temperature 0 °C to 40 °C
conditions Operating Humidity ≤ 80 %
Storage Temperature -20°C to 60 °C
Storage Humidity ≤ 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS 33
19M38A 19M38D
Video Signal Horizontal 30 kHz to 83 kHz (Automatic)
ENGLISH
Frequency
ENG
30 kHz to 61 kHz (Automatic) ● ●
Vertical 56 Hz to 75 Hz (D-SUB) ● ●
Frequency
56 Hz to 75 Hz (DVI-D) ●
56 Hz to 61 Hz (HDMI)
Synchronization Separate Sync. ● ●
Digital ●
Input Connector 15 pin D-SUB Connector ● ●
DVI-D Connector (Digital) ●
HDMI Connector
34 SPECIFICATIONS
SPECIFICATIONS
ENGLISH
ENG
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS 35
ENGLISH
ENG
Video Horizontal 30 kHz to 83 kHz (Automatic) ● ● ●
Signal Frequency 30 kHz to 61 kHz (Automatic)
Vertical Frequency 56 Hz to 75 Hz (D-SUB) ● ● ●
56 Hz to 75 Hz (DVI-D) ●
56 Hz to 61 Hz (HDMI) ●
Synchronization Separate Sync. ● ● ●
Digital ● ●
Input 15 pin D-SUB Connector ● ● ●
Connector
DVI-D Connector (Digital) ●
HDMI Connector ●
36 SPECIFICATIONS
SPECIFICATIONS
ENGLISH
ENG
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS 37
ENGLISH
ENG
Video Horizontal 30 kHz to 83 kHz (Automatic) ● ● ●
Signal Frequency 30 kHz to 61 kHz (Automatic)
Vertical Frequency 56 Hz to 75 Hz (D-SUB) ● ● ●
56 Hz to 75 Hz (DVI-D) ●
56 Hz to 61 Hz (HDMI) ●
Synchronization Separate Sync. ● ● ●
Digital ● ●
Input 15 pin D-SUB Connector ● ● ●
Connector
DVI-D Connector (Digital) ●
HDMI Connector ●
38 SPECIFICATIONS
SPECIFICATIONS
ENGLISH
ENG
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS 39
ENGLISH
ENG
Video Horizontal 30 kHz to 83 kHz (Automatic) ● ● ●
Signal Frequency 30 kHz to 61 kHz (Automatic)
Vertical Frequency 56 Hz to 75 Hz (D-SUB) ● ● ●
56 Hz to 75 Hz (DVI-D) ●
56 Hz to 61 Hz (HDMI) ●
Synchronization Separate Sync. ● ● ●
Digital ● ●
Input 15 pin D-SUB Connector ● ● ●
Connector
DVI-D Connector (Digital) ●
HDMI Connector ●
40 SPECIFICATIONS
SPECIFICATIONS
ENGLISH
27MP38HQ 27MP38VQ
ENG
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS 41
ENGLISH
27MP38HQ 27MP38VQ
ENG
Video Signal Horizontal 30 kHz to 83 kHz (Automatic) ● ●
Frequency 30 kHz to 61 kHz (Automatic)
Vertical 56 Hz to 75 Hz (D-SUB) ● ●
Frequency
56 Hz to 75 Hz (DVI-D) ●
56 Hz to 61 Hz (HDMI) ● ●
Synchro- Separate Sync. ● ●
nization Digital ● ●
Input Connector 15 pin D-SUB Connector ● ●
DVI-D Connector (Digital) ●
HDMI Connector ● ●
42 SPECIFICATIONS
D-SUB/DVI-D Timing
ENG
16M38A
Horizontal Vertical
Display Modes (Resolution) Polarity(H/V)
Frequency(kHz) Frequency(Hz)
640 x 480 31.5 60 -/-
800 x 600 35.2 56 +/+
800 x 600 37.9 60 +/+
1024 x 768 48.363 60 -/-
1280 x 720 45 60 +/+
1366 x 768 48 60 +/+ Recommend Mode
19M38A 19M38D
Horizontal Vertical
Display Modes (Resolution) Polarity(H/V)
Frequency(kHz) Frequency(Hz)
720 x 400 31.468 70 -/+
640 x 480 31.469 60 -/-
640 x 480 37.500 75 -/-
800 x 600 37.879 60 +/+
800 x 600 46.875 75 +/+
832 x 624 49.725 75 -/-
1024 x 768 48.363 60 -/-
1366 x 768 47.712 60 +/+ Recommend Mode
ENGLISH
Display Modes (Resolution) Polarity(H/V)
Frequency(kHz) Frequency(Hz)
ENG
720 x 400 31.468 70 -/+
640 x 480 31.469 60 -/-
640 x 480 37.500 75 -/-
800 x 600 37.879 60 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75 +/+
1152 x 864 67.500 75 +/+
1280 x 1024 63.981 60 +/+
1280 x 1024 79.976 75 +/+
1680 x 1050 65.290 60 -/+
1920 x 1080 67.500 60 +/+ Recommend Mode
HDMI Timing
20M38H
480P 31.50 60 O
576P 31.25 50 O
720P 37.50 50 O
720P 45.00 60 O
480P 31.50 60 O
576P 31.25 50 O
720P 37.50 50 O
720P 45.00 60 O
1080P 56.25 50 O
O
1080P 67.50 60
Recommend Mode
Indicator
Mode LED Color
On Mode White (Only 15 seconds)
Sleep Mode Blinking White
Off Mode Off
44 PROPER POSTURE
PROPER POSTURE
ENGLISH
ENG
Adjust the
Monitor set and Adjust the location of the
your posture to Monitor set to avoid it
allow you to view reflecting light.
images at the
optimal viewing
angle.
Make sure to read the Safety Precautions before ENERGY STAR® is a set of power-saving
using the product. guidelines issued by the U.S.Environmental
Keep the Owner’s Manual (CD) in an accessible Protection Agency(EPA).
place for future reference.
The model and serial number of the SET is As an ENERGY STAR® Partner LGE
located on the back and one side of the SET. U. S. A.,Inc. has determined that this
Record it below should you ever need service. product meets the ENERGY STAR®
guidelines for energy efficiency.
MODEL Refer to ENERGY STAR.gov for more
SERIAL information on the ENERGY STAR® program.