Professional Documents
Culture Documents
Quick Grid Lines Form
Quick Grid Lines Form
Quick Grid Lines Form
ing of the grid lines. Select the Grid Only button, and the form
shown in Figure 4 will display.
Figure 4
Quick Grid Lines
form
C. The Quick Grid Lines form is used to specify the grids and spacing
in the X, Y, and Z directions. Set the number of grid lines to 2 for the
X direction, to 7 for the Y direction, and to 3 for the Z direction.
Type 432 in (including the in) into the X direction spacing edit box
and press the Enter key on your keyboard. Note that the program au-
tomatically converts the 432 in to 36 to be consistent with the default
units of feet. Enter 6 for the Y direction spacing, and 20 for the Z di-
rection spacing. The values specified in the First Grid Line Location
area locate the origin of the grid lines; make sure that these values
are all set to zero for this tutorial.