Professional Documents
Culture Documents
GPeditor Download EN Technical Support 180823 W PDF
GPeditor Download EN Technical Support 180823 W PDF
GPeditor Download EN Technical Support 180823 W PDF
Preface
Thank you very much for selecting Autonics products.
Please familiarize yourself with the information contained in the Safety Precautions section
before using this product.
This user manual contains information about the product and its proper use, and should be kept
in a place where it will be easy to access.
Symbol Description
※1 Annotation mark.
Safety Precautions
Following these safety precautions will ensure the safe and proper use of the product and
help prevent accidents, as well as minimizing possible hazards.
Safety precautions are categorized as Warnings and Cautions, as defined below:
Failure to follow the instructions may lead to a serious injury
Warning
or accident.
Fail-safe device must be installed when using the unit with machinery that may cause
serious injury or substantial economic loss. (e.g. nuclear power control, medical equipment,
ships, vehicles, railways, aircraft, combustion apparatus, safety equipment, crime/disaster
prevention devices, etc.)
Failure to follow this instruction may result in personal injury, fire, or economic loss.
In case using the Graphic Panel touch switch for controlling, do not use the switch as an
emergency switches or those related to safety that may cause physical injury or property
damage in the event of a malfunction.
Failure to follow this instruction may result in personal injury, fire, or economic loss.
In case controlling other devices through Graphic Panel communication, and there is a
possibility of malfunction due to communication error, an alternative circuit must be
constructed.
Failure to follow this instruction may result in personal injury, fire, or economic loss.
Do not use the product in an area or an environment not specified in the manual.
Failure to follow this instruction may result in personal injury, fire, or economic loss.
Do not connect, repair, or inspect the unit while connected to a power source.
Failure to follow this instruction may result in electric shock or fire.
Do not disassemble or modify the unit. Please contact us if necessary.
Failure to follow this instruction may result in electric shock or fire.
Use the insulated trans to supply the rectified power.
Failure to follow this instruction may result in electric shock or fire.
Do not use over the rated power.
Failure to follow this instruction may result in electric shock or fire.
This product uses lithium battery, do not disassemble or burn up.
Failure to follow this instruction may result in explosion or fire.
Wire properly after checking power terminal polarity.
Failure to follow this instruction may result in fire or product malfunction
Please read all notes and cautions related to installation and wiring in the manual.
Failure to follow this instruction may result in electric shock or product malfunction.
Make sure the ground wire of Graphic Panel is wired separately from the ground wires of
other devices. Ground resistance must be less than 100Ω, and a lead wire of which
2
sectional area is over 1.25mm should be used.
Failure to follow this instruction may result in electric shock or product malfunction.
When connecting Graphic Panel ports and constructing input/output, check the pin number
and terminal block before connecting.
Failure to follow this instruction may result in fire or product malfunction.
Tighten bolt on terminal block with specified tightening torque.
Failure to follow this instruction may result in short circuit, fire or product malfunction.
Do not press the surface of the touch panel with sharp or hard objects.
Failure to follow this instruction may result in touch panel damage.
Keep Graphic Panel at the specified temperature.
Failure to follow this instruction may result in LCD panel damage due to over the rated
temperature range.
Do not inflow dust or wire dregs into the unit.
Failure to follow this instruction may result in fire or product malfunction.
Do not use in an area with excessive humidity or temperature.
Failure to follow this instruction may result in product damage or shortening the life cycle of
the unit.
Do not close ventilating opening of this product.
Failure to follow this instruction may result in product damage due to increase inner heat.
Keep the product out of direct sunlight or excessive dust.
Failure to follow this instruction may result in product damage or shortening the life cycle of
the unit.
Do not use or store in a place with shock or vibration.
Failure to follow this instruction may result in product damage or shortening the life cycle of
the unit.
When liquid crystal from the broken LCD is smeared with skin, wash it for 15 minutes. If it is
gotten in the eye, wash it for 15 minutes and contact with the medical specialist for more
information.
Do not use water or oil-based detergent when cleaning the unit. Use dry cloth to clean the
unit.
Failure to follow this instruction may result in electric shock or fire.
Please separate as an industrial waste when disuse this unit.
To change the battery, contact the store or an authorized technician.
The manufacturer is not liable for damages that occur due to causes for which the
manufacturer is not responsible, damages that occur due to an extraordinary situation,
secondary damages, compensation for accidents, damages occurring on other products,
compensation for other processes, and damage and loss of opportunity to the user due a
malfunction of the product, regardless of the predictability of the accident.
Note that this device is KCC certified for commercial use. Make proper applications for the
product.
Table of Contents
Preface ............................................................................................................................. 3
Technical Support Manual Guide ..................................................................................... 4
Technical Support Manual Symbols ................................................................................. 5
Safety Precautions ........................................................................................................... 6
Table of Contents ............................................................................................................. 9
1 System ....................................................................................................... 11
1.1 Version ............................................................................................................... 11
1.2 Connection cable ............................................................................................... 11
2 Communication interface ......................................................................... 13
2.1 Serial .................................................................................................................. 13
2.2 Ethernet ............................................................................................................. 16
1 System
1.1 Version
Software Version Note
Ms Windows Windows 7 —
No SIGNAL No SIGNAL
1 - 6 DSR
2 RXD 7 -
3 TXD 8 -
4 DTR 9 -
5 SG
RS422
No SIGNAL No SIGNAL
1 TXD+ 6 TXD-
2 RXD+ 7 RXD-
3 RTS- 8 RTS+
4 CTS+ 9 CTS-
5 SG
No SIGNAL No SIGNAL
TXD+ RXD-
1 6
(white-yellow) (green)
TXD- SG
2 7
(yellow) (white-brown)
RXD+
3 8 SG(brown)
(white-green)
SG
4
(blue)
SG
5
(white-blue)
2 Communication interface
2.1 Serial
1st Touch top-left of the GP or LP.
Stop 1 Fixed
6th At GPEditor program, set port on [Communication] – [Option] menu and download the
setting.
2.2 Ethernet
1st Check IP address.
Path: Control panel-> Network and Internet Sharing Center -> Local Area Connection
(Properties) -> Internet Protocol (TCP/IP) -> Properties.
5th At GPEditor program, set target IP on [Communication] – [Option] menu and download the
setting. The target IP should be set same as GP/LP IP.