a] Sy Aida grad
300SOstructural sections
United Steel introduces 300So structural steel from Tung Ho, Taiwan.
J4 eisreniaRaaStay Strong with Tung Ho and United Steel
‘Tung Ho test certificates contain all the
relevant information required to meet
AS/NZS3679.1:2010
ACRS accreditation ensures the testing processes
are certified and credible.
A Test Certificate that complies with AS/NZS
3679.:2010 must contain all of the items on
following list, mu
he
2 written in English and must
use alpha numeric characters
Individual Length Marks
A roll mark with the two characters ‘AS’ plus
manufacturers mark
+The Tung Ho roll mark is "THAS'
+ This mark should be at intervals of no greater
then am along the leng
Test Reports and Test Certificates
A test report or test certificate shall provide
results, if required by agreement between the
purchaser and the manufacturer, relating to
the following.
+ Tests performed by a laboratory accredited by
signatories to ILAC(MRA) on behalf of the
manufacturer for the purpose of establishing
compliance with the standard
+ Additional tests as agreed between the
purchaser and the manufacturer
Any report or test certificate shall be written in
English alphanumeric characters, be issued by the
manufacturer and shall include the following:
+ Manufacturers and testing authority's name
eg, Tung Ho Steel & ILAC-MRA
est Certificate number
+ Date
+ Product, testing specification and grade
eg. AS/NZS 3679.1:2010 30050 grade
+ Product designation ie. dimensions
+ Product steelmaking process, eg. Electric
Arc process — continuous cast
+ Length, bundle, pack or unique identifier to
which the test certificate applies
+ Heat number (from casting)
+ Mechanical properties: tensile tests, yield stress
in MPa, tensile strength in MPa and % elongation
+ Chemical analysis type, e.g. cast analysis 'L
UNITED
STEEL
“Tung Ho products meet ll the required standards
g
ssw senior cain
Sze ve 17 bg
Hear Nostao7¢ 12m
FT Tung He Label identification,
te! feature
mark identifying
Chemical composition of Carbon (C),
Phosphorus (P), Manganese (Mn), Silicon (Si),
Sulphur (5), Chromium (Cr), Molybdenum (Mo),
Vanadium (V), Nickel (Ni), Copper (Cu),
Aluminium (Al), Titanium (Ti), Niobium (Nb),
Carbon equivalence (CE), any element
intentionally added
Impact test results at the specified test
temperature for seismic (So) grades e.g. Charpy
v-notch impact test
‘Additional tests agreed between the purchaser
and the manufacturer
Any third party accrediting body,
by LAC (MRA) eg, TAF (Taiwan
Accredited Foundation)
Signatory from manufacturer, supplier and
testing authority attesting to items above.
ecognised
For more information call us on 0800 800 649 or visit www.unitedsteel.co.nz