Professional Documents
Culture Documents
TABLE 10.12 US Standard Bolt Torques For Bus Connections Heat-Treated Steel - Cadmium or Zinc Plated
TABLE 10.12 US Standard Bolt Torques For Bus Connections Heat-Treated Steel - Cadmium or Zinc Plated
12
US Standard
Bolt Torques for Bus Connections
Heat-Treated Steel - Cadmium or Zinc Plated
1
Bronze alloy bolts shall have a minimum tensile strength of 70,000 pounds per square inch.
2
Aluminum alloy bolts shall have a minimum tensile strength of 55,000 pounds per square inch.
TABLE 10.12 (CONT.)
3
Bolts, cap screws, nuts, flat washers, locknuts: 18-8 alloy.
Belleville washers: 302 alloy.