Professional Documents
Culture Documents
Apigility: Home Video Download
Apigility: Home Video Download
Apigility: Home Video Download
org/documentation/auth/authentication-oauth2
Home
Video
Documentation
Download
Contacts
Apigility
Home
Video
Documentation
Download
Contacts
OAuth2
OAuth2 is an authentication framework used worldwide; for instance Facebook , Github, and Twitter use this protocol to authenticate their APIs. Before introducing the
Apigility OAuth2 functionalities, let's briefly look at the core concepts of this authentication system.
In Apigility, the Resource Server and the Authorization Server are delivered from the same API server.
The OAuth2 protocol is actually a framework for authorization. From the abstract of RFC 6749 we can read:
The OAuth 2.0 authorization framework enables a third-party application to obtain limited access to an HTTP service, either on behalf of a resource owner
by orchestrating an approval interaction between the resource owner and the HTTP service, or by allowing the third-party application to obtain access on its
own behalf.
Web-server applications
Browser-based applications
Mobile apps
Username and password access
Application access
In all these use cases, the goal of the OAuth2 protocol is to exchange a token between the Client and the Resource Server. This token is used to authenticate all the API
calls using the Authorization HTTP header. Below is reported an example of the Bearer token (RFC 7650 ), the most used token type of OAuth2:
Authorization: Bearer RsT5OjbzRn430zqMLgV3Ia
Security considerations
The OAuth2 protocol does not guarantee confidentiality and integrity of communications. That means you must protect HTTP communications using an additional layer.
One possible solution is the usage of SSL/TLS (HTTPS) to encrypt the communication channel from the client to the server.
The first version of OAuth (OAuth1) supported an authentication mechanism based on the HMAC algorithm to guarantee confidentiality and integrity; OAuth2 does not
(although a Draft proposal exists to support MAC tokens). The lack of message hashing is the primary concern raised regarding the security of OAuth2, and the one most
developers complain about (e.g. this blog post by Eran Hammer, the ex-lead of the OAuth specifications).
In a nutshell, always use HTTPS for OAuth2, as it's the only way to guarantee message confidentiality and integrity with this protocol!
Setup OAuth2
1 of 9 01/01/2019 17:27
Apigility https://apigility.org/documentation/auth/authentication-oauth2
Before we jump into the different use cases for OAuth2 authentication, we need to configure an authentication adapter for Apigility. Go to the Authentication page, click
on the "New adapter" button:
You need to choose which adapter to use for the OAuth2 dataset. You can manage the dataset using a relational database (the OAuth2 library Apigility utilizes uses PDO
specifically) or MongoDB.
If you select the OAuth2 PDO adapter, you will see the following form:
In this form, you need to insert the appropriate configuration to access the OAuth2 database, as well as the URI path to use for authentication (the proposed one is
/oauth).
OAuth2 implementation
Apigility uses the oauth2-server-php library by Brent Shaffer to manage the OAuth2 authentication framework.
For testing purposes, you can use the SQLite database shipped in the zf-oauth2 module, in the file vendor/zfcampus/zf-oauth2/data/dbtest.sqlite; we suggest
copying it to data/oauth2-test.sqlite. To use this example, you need to specify the absolute path of the database file in the PDO DSN field, using the syntax
2 of 9 01/01/2019 17:27
Apigility https://apigility.org/documentation/auth/authentication-oauth2
sqlite:/path/to/database/file. In this database we created a client with client_id testclient and client_secret testpass, and a user with username testuser and a
password testpass. We will use this data in the following use cases.
All sensitive data such as client_secret (in the oauth_clients table) and password (in the oauth_users table), are hashed by Apigility using the bcrypt algorithm. If
you want to generate the bcrypt value of a plaintext password, you can use the Zend\Crypt\Password\Bcrypt component of Zend Framework 2. We have also included a
tool to generate bcrypt hash values from the command line; this tool is located at vendor/zfcampus/zf-oauth2/bin/bcrypt.php. For instance, to generate the bcrypt
value of the string "test", you can use the following command:
$ php vendor/zfcampus/zf-oauth2/bin/bcrypt.php test
Web-server applications
The Web-server applications scenario is used to authenticate a web application with a third-party service (e.g., imagine you built a web application that needs to consume
the API of Facebook). You can authenticate your application using the third-party server with a 3-step flow as illustrated in this diagram:
The web application sends a request (including the client_id and the redirect_uri) to the third-party service asking for an Authorization code (1). The third-party
server shows an Allow/Deny page to the end-user requesting authorization for access. If the user clicks on "Allow", the server sends the Authorization Code to the web
application using the redirect_uri (2). The web application can now perform a token request, passing the client_id, the redirect_uri, and the client_secret to
prove that it is authorized to perform this request (3). The third-party server sends the token as response if the request is valid (4).
Using Apigility, we can request an access code using the following 3 steps:
Using a browser you can request the authorization approval from this page:
http://<apigility URL>/oauth/authorize?response_type=code&client_id=testclient&redirect_uri=/oauth/receivecode&state=xyz
Note: The above assumes you specified /oauth as the URI path for the Apigility OAuth2 server. If you specified a different URI when you configured
OAuth2, use that instead.
<apigility URL> in the above example is the domain where you installed Apigility (if you are using the internal PHP web server, this can be something like
localhost:8888). Remember, in production, you should always use SSL/TLS to secure your API when using OAuth2.
Going to this URL, you will see a web page like the following:
This web page is stored in the view script vendor/zfcampus/zf-oauth2/view/zf/auth/authorize.phtml; if desired, you can customize this view script.
The best way to customize the authorization page is to override the view template oauth/authorize using the template_map value of the view_manager in
the config.module.php of a ZF2 module you have defined in your application:
'view_manager' => [
/* ... */
3 of 9 01/01/2019 17:27
Apigility https://apigility.org/documentation/auth/authentication-oauth2
'template_map' => [
'oauth/authorize' => __DIR__ . '/../view/oauth/authorize.phtml',
],
/* ... */
],
If you approve the authorization access by clicking the "Yes" button, Apigility will redirect you to the URI specified in the redirect_uri query string parameter, passing
the authorization code in the query string. In our example we will be redirected to the page /oauth/receive as shown below:
This web page is stored in the view script vendor/zfcampus/zf-oauth2/view/zf/auth/receive-code.phtml; like the authorization page, this script can also be
customized.
The best way to customize the "receive code" page is to override the view template oauth/receive-code using the template_map value of the
view_manager in the config.module.php of a ZF2 module you have defined in your application:
'view_manager' => [
/* ... */
'template_map' => [
'oauth/receive-code' => __DIR__ . '/../view/oauth/receive-code.phtml',
],
/* ... */
],
Now that we have the authorization code, we can request the access token by sending this code to the /oauth URI, passing the client_id, the client_secret, and the
redirect_uri as shown below:
{
"redirect_uri": "/oauth/receivecode",
"client_id": "testclient",
"client_secret": "testpass",
"code": "a4dd64ffb43e6bfe16d47acfab1e68d9c7a28381",
"grant_type" : "authorization_code"
}
The OAuth2 server will reply with the token using a JSON structure like that:
HTTP/1.1 200 OK
Content-Type: application/json
{
"access_token": "907c762e069589c2cd2a229cdae7b8778caa9f07",
"expires_in": 3600,
"refresh_token": "43018382188f462f6b0e5784dd44c36f476ccce6",
"scope": null,
"token_type": "Bearer"
}
You have 30 seconds to request the access token starting from the time that you get the authorization code.
Finally, you can access the API using the Bearer token in the Authorization header of the HTTP request. For instance, we provided a test resource in the zf-oauth2
4 of 9 01/01/2019 17:27
Apigility https://apigility.org/documentation/auth/authentication-oauth2
module, via the /oauth/resource URI. The following request demonstrates sending the token:
GET /oauth/resource HTTP/1.1
Accept: application/json
Authorization: Bearer 907c762e069589c2cd2a229cdae7b8778caa9f07
Browser-based applications
This scenario is quite common when using a Javascript client (e.g., a Single Page Application) that requests access to the API of a third-party server. In a browser-based
application, you cannot store the client_secret in a secure way, which means you cannot use the previous workflow (web-server application). Instead, we need to use
an implicit grant. This is similar to the authorization code, but rather than an authorization code being returned from the authorization request, a token is returned.
In the following diagram, we illustrate the 2 steps needed for the authentication of browser-based application scenarios:
The browser-based application requests the authorization page of a third-party service (Step 1). This page contains the Allow/Deny buttons used to authorize API access
to the application. If the user clicks on the "Allow" button, the third-party server sends the access token using the URI fragment identifier (#access_token in Step 2).
The usage of the fragment identifier for the access_token is important from a security point of view, because the token is not passed to the server; the token can be
accessed only by the client (browser).
The browser-based application scenario is supported by Apigility using the implicit grant type. This grant type is disabled by default and you need to enable it manually,
changing the configuration of allow_implicit to true in the config/autoload/local.php file:
return [
'zf-oauth2' => [
// ...
'allow_implicit' => true,
// ...
],
];
After this change, we can request the access token using the browser-based application 2 steps:
We need to request the same URL used in step 1 of the web-server application scenario, /oauth/authorize:
http://<apigility URL>/oauth/authorize?response_type=token&client_id=testclient&redirect_uri=/oauth/receivecode&state=xyz
Note: The above assumes you specified /oauth as the URI path for the Apigility OAuth2 server. If you specified a different URI when you configured
OAuth2, use that instead.
<apigility URL> in the above example is the domain where you installed Apigility (if you are using the internal PHP web server, this can be something like
localhost:8888). Remember, in production, you should always use SSL/TLS to secure your API when using OAuth2.
We will see the same web page as shown in the Web-server application scenario, asking for authorization approval.
If we approve authorization access, by clicking on "Yes", Apigility will send the access token to the redirect_uri using a URI fragment identifier (#access_token).
In our example, we redirect the access token to the /oauth/receive page, reported below:
5 of 9 01/01/2019 17:27
Apigility https://apigility.org/documentation/auth/authentication-oauth2
If you click on the "Click here to read…" link, you will see the access token appear on the page. This action is performed by javascript code that parses the URL to
extract the access_token value. An example of this javascript code is shown below:
// function to parse fragment parameters
var parseQueryString = function( queryString ) {
var params = {}, queries, temp, i, l;
Mobile apps
This OAuth2 scenario is similar to browser-based applications. The only difference is the redirect_uri, which, in the mobile world, can be a custom URI scheme. This
allow native mobile apps to interact with a web browser application, opening a URL from a native app and going back to the app with a custom URI. For example,
iPhone apps can register a custom URI protocol such as facebook://. On Android, apps can register URL matching patterns which will launch the native app if a URL
matching the pattern is visited.
As you can see, the flow is a 2 step authentication mechanism similar to browser-based applications.
The client application sends a POST to the OAuth2 server with the username and password values. The OAuth2 server responds with the token access as part of a JSON
payload.
You can use the password grant in two ways: with confidential (trusted) clients, or public clients.
Confidential clients
With confidential, trusted clients, you provide the client_id and client_secret as HTTP Basic authentication credentials, and the username, and password values in
the request body, in order to obtain an access token.
6 of 9 01/01/2019 17:27
Apigility https://apigility.org/documentation/auth/authentication-oauth2
{
"grant_type": "password",
"username": "testuser",
"password": "testpass"
}
Note: The Authorization header above is the HTTP Basic authentication credentials for the client_id "testclient" and the client_secret "testpass".
Public Clients
If we are using a public client (by default, this is true when no secret is associated with the client) you can omit the client_secret value; additionally, you will now
pass the client_id in the request body. In our example database the testclient2 client_id has an empty client_secret.
POST /oauth HTTP/1.1
Accept: application/json
Content-Type: application/json
{
"grant_type": "password",
"username": "testuser",
"password": "testpass",
"client_id": "testclient2"
}
Application access
This use case can be used to authenticate against applications, mosty likely in machine to machine scenarios. The OAuth2 grant type for this use case is called
client_credentials. The usage is similar to the public client password access reported above; the application sends a POST request to the OAuth2 server, passing both
the client_id and the client_secret in the body. The server replies with the token if the client credentials are valid.
In Apigility, you can refresh the access token with a POST to the OAuth2 server endpoint. In the example SQLite database, we can perform a refresh token using the
following command:
POST /oauth HTTP/1.1
Accept: application/json
Content-Type: application/json
{
"grant_type": "refresh_token",
"refresh_token": "<the refresh_token>",
"client_id": "testclient",
"client_secret": "testpass"
}
{
"access_token": "470d9f3c6b0371ff2a88d0c554cbee9cad495e8d",
"expires_in": 3600,
"scope": null,
"token_type": "Bearer"
}
You can also refresh a token from a trusted client, specifying only the client_id and the refresh_token fields.
If you want to generate a new refresh_token value, you need to enable the always_issue_new_refresh_token zf-oauth2 configuration option, setting it to true (the
default is false). This option can be changed in the config/autoload/local.php file of your Apigility project.
return [
// ...
'zf-oauth2' => [
// ...
'options' => [
'always_issue_new_refresh_token' => true,
],
],
// ...
];
You can also change the lifetime of the new refresh token using the refresh_token_lifetime option. The value is expressed in seconds (default is 1209600, equal to 14
days).
7 of 9 01/01/2019 17:27
Apigility https://apigility.org/documentation/auth/authentication-oauth2
specific access tokens by removing the value from the database. For instance, if you are using the PDO adapter, all the tokens are stored in the oauth_access_tokens
table; if you want to revoke a token you can delete it from the table, with a SQL query:
DELETE FROM oauth_access_tokens WHERE access_token="<token to remove>";
Apache2 FastCGI
If you are using Apache2 with FastCGI to pass traffic in using PHP-FPM, you may experience an unexpected 403 error for any methods that have the Authorization box
ticked.
This is because Apache2 strips the Authentication header by default when FastCGI is enabled.
In order to pass in the Authentication header to PHP, add the following directive to your virtual host configuration:
SetEnvIf Authorization "(.*)" HTTP_AUTHORIZATION=$1
Always consult the documentation for a given adapter to verify the format.
Table of Contents
Introduction
Installation
Getting Started
REST Service Tutorial
Updating to version 1.4
API Primer
What is an API?
Representation Formats
Hypermedia Application Layer
Error Reporting
HTTP Method Negotiation
Content Negotiation
Content Validation
Versioning
Content Validation
Introduction
Basic Usage
Filtering
Validating
Advanced Content Validation
API Documentation
Introduction
Swagger format
Customize API documentation
Deployment
Deploying Apigility
Recipes
Adding Apigility to an Existing Project
8 of 9 01/01/2019 17:27
Apigility https://apigility.org/documentation/auth/authentication-oauth2
Module Reference
zf-apigility
zf-apigility-admin
zf-apigility-documentation
zf-apigility-documentation-apiblueprint
zf-apigility-documentation-swagger
zf-apigility-doctrine
zf-apigility-provider
zf-apigility-welcome
zf-api-problem
zf-asset-manager
zf-composer-autoloading
zf-configuration
zf-content-negotiation
zf-content-validation
zf-deploy
zf-development-mode
zf-doctrine-querybuilder
zf-hal
zf-http-cache
zf-mvc-auth
zf-oauth2
zf-rest
zf-rpc
zf-versioning
9 of 9 01/01/2019 17:27