Professional Documents
Culture Documents
Materials, Finishes and Warranty Schedule: Project: Balwyn Community Centre Project No: 1721 Client: City of Boroondara
Materials, Finishes and Warranty Schedule: Project: Balwyn Community Centre Project No: 1721 Client: City of Boroondara
NOTE: REVISIONS:
• THIS SCHEDULE IS TO BE READ INCONJUNCTION WITH THE TRADE SECTIONS OF THE SPECIFICATION AND THE FOR TENDER REVISION _
COMPLETE DRAWING SET.
Warranty Requirements
A. The Builder / Contractor or other approved Warrantors shall provide written warranties as per this schedule and where so
specified elsewhere in this specification.
B. Each warranty shall be in an approved form and shall specifically include the provisions required in writing.
C. Warranty periods shall commence from the date of the Notice of Practical Completion for the duration noted in this schedule.
REV CODE ITEM / FINISH LOCATION MANUFACTURE PRODUCT / SYSTEM FINISH / COLOUR NOTES APPROVALS/SAMPLES/ WARR-ANTY
(REFER DWGS) R SUBMISSIONS PERIOD
/ SUPPLIER
_ FEC Fire extinguisher Type Approved Dry Chemical Extinguisher 80B • Manufacturers of materials approved in writing by the statutory authority may supply Provide certificate of 5 YEARS
C manufacturer. (E) DP equipment. compliance stating type and
in accordance with AS2444 • Supply and install extinguishers authorised by the authority in accordance with the location of installed
schedule provided by the authority. equipment and signage
• Supply brackets signs and other required items, and the means of securing them to the complies with AS2444.
building.
_ FBL Fire Blanket Approved Fire Blanket in accordance with • Manufacturers of materials approved in writing by the statutory authority may supply Provide certificate of 5 YEARS
manufacturer. AS2444 equipment. compliance stating type and
• Supply and install extinguishers authorised by the authority in accordance with the location of installed
schedule provided by the authority. equipment and signage
• Supply brackets signs and other required items, and the means of securing them to the complies with AS2444.
building.
NOTE: REVISIONS:
• THIS SCHEDULE IS TO BE READ INCONJUNCTION WITH THE TRADE SECTIONS OF THE SPECIFICATION AND THE FOR TENDER REVISION _
COMPLETE DRAWING SET.
Warranty Requirements
A. The Builder / Contractor or other approved Warrantors shall provide written warranties as per this schedule and where so
specified elsewhere in this specification.
B. Each warranty shall be in an approved form and shall specifically include the provisions required in writing.
C. Warranty periods shall commence from the date of the Notice of Practical Completion for the duration noted in this schedule.
REV CODE ITEM / FINISH LOCATION MANUFACTURE PRODUCT / SYSTEM FINISH / COLOUR NOTES APPROVALS/SAMPLES/ WARR-ANTY
(REFER DWGS) R SUBMISSIONS PERIOD
/ SUPPLIER
_ H1 Handle type 1 Refer Drawings Hafele Cat No. 106.61.059 Matt Brushed Refer joinery for locations. Provide Shop Drawings for
Approval.
_ JV1 Joinery Vent Refer Drawings Hafele Ventilation Grill, Dimension: Aluminium Finish Refer joinery for locations. Provide Shop Drawings for
60mm H x 250mm W x 2mm Approval.
_ LK1 Joinery Lock Refer Drawings Lockwood Thick
Pin Tumbler Cupboard Lock Aluminium Finish Refer joinery for locations. Confirm keying with superintendent. Provide Shop Drawings for
692ASC. Approval.
_ TV1 Timber Veneer Type 1 Refer Drawings Ventech Moisture Resistant Board Blackbutt (to match TC1 - Provide mitred junction to corners Provide Shop Drawings for
Architectural & TC2 panels) Approval.
Panels
_ TP1 Timber Panel Refer Drawings Porta Porta Contours Riverine Tasmainian Oak - Provide mitred junction to corners Provide Shop Drawings for
Approval.
_ WR1 Waste receptable 1 Refer Drawings Hafele Waste Bin, One2Five. Cat No. Dual waste Bin Refer joinery for locations. Provide Shop Drawings for
502.92.602 2x17 litre capacity soft Approval.
close function.
_ WR2 Waste receptable2 Refer Drawings Hafele Double Waste Bin, Hailo Euro Dual waste Bin Refer joinery for locations. Provide Shop Drawings for
Cargo. Cat No. 503.70.322 2x38 litre capacity soft Approval.
close function.
_ LM1 Laminate Type 1 Refer Drawings Laminex Moisture Resistant Board Tornado - Provide mitred junction to corners Provide Shop Drawings for 5 YEARS
- Provide ABS edging to match Approval.
_ LM2 Laminate Type 1 Refer Drawings Laminex Moisture Resistant Board Deep Sea - Provide mitred junction to corners Provide Shop Drawings for 5 YEARS
- Provide ABS edging to match Approval.
_ LM3 Laminate Type 3 Refer Drawings Laminex Moisture Resistant Board Parchment - Provide mitred junction to corners Provide Shop Drawings for 5 YEARS
- Provide ABS edging to match Approval.
_ LM4 Laminate Type 4 Refer Drawings Laminex Moisture Resistant Board Black - Provide mitred junction to corners Provide Shop Drawings for 6 YEARS
- Provide ABS edging to match Approval.
NOTE: REVISIONS:
• THIS SCHEDULE IS TO BE READ INCONJUNCTION WITH THE TRADE SECTIONS OF THE SPECIFICATION AND THE FOR TENDER REVISION _
COMPLETE DRAWING SET.
Warranty Requirements
A. The Builder / Contractor or other approved Warrantors shall provide written warranties as per this schedule and where so
specified elsewhere in this specification.
B. Each warranty shall be in an approved form and shall specifically include the provisions required in writing.
C. Warranty periods shall commence from the date of the Notice of Practical Completion for the duration noted in this schedule.
REV CODE ITEM / FINISH LOCATION MANUFACTURE PRODUCT / SYSTEM FINISH / COLOUR NOTES APPROVALS/SAMPLES/ WARR-ANTY
(REFER DWGS) R SUBMISSIONS PERIOD
/ SUPPLIER
_ PIN1 Acoustic Panel Refer Drawings Autex Symphony Stately - Refer Joinery & Internal Elevations for locations. 5 YEARS
- Provide 9m E Zero MDF backing with aluminium angle edge trim.
_ SW Slat Wall MCH Rooms OZ shelving 100mm Spacing (11 SLOT) MDF White - Refer Joinery & Internal Elevations for locations.
solutions Slat Board Panels With - Install as per manufactures instructions.
Aluminium Inserts – 2400mm x
_ - Hinges Hafele or Blum 1200mm x Cup
Concealed 18mm Type 180º Chrome Painted Steel Install number of hinges as required for door height and weight. 5 YEARS
opening. Self closing with built in
_ - Drawer Runners catch.
Ball Bearing Type with hold close. White Size to suit drawing and potential loading. 5 YEARS
_ - Adjustable Shelf lugs Hettich 5mm Diam. Shelf Supports. No. Chrome Painted Steel Install at 100mm centres 5 YEARS
76010398
_ - Carcuss 16mm or 32mm thick moisture Selected laminate to Provide matching 2mm ABS PVC edge strips. Submit shop drawings 5 YEARS
resistant E0 MDF (E Zero exposed surfaces and Provide certification of E0 compliance. including layouts, details,
formaldehyde emissions limit.) White Melamine to fixing types, finishes and
Refer Drawings for locations. concealed surfaces. fixtures for the complete
shop built cabinetwork for
approval by the
superintendent.
_ - Open Shelves 32mm thick moisture resistant E0 Selected laminate to Provide matching 2mm ABS PVC edge strips. Submit shop drawings 5 YEARS
MDF (E Zero formaldehyde exposed surfaces and Provide certification of E0 compliance. including layouts, details,
emissions limit.) White Melamine to fixing types, finishes and
Refer Drawings for locations. concealed surfaces. fixtures for the complete
shop built cabinetwork for
approval by the
superintendent.
_ - Shelves 16mm (upto 900mm wide) or Selected laminate to Provide matching 2mm ABS PVC edge strips. Submit shop drawings 5 YEARS
32mm thick moisture resistant E0 exposed surfaces and Provide certification of E0 compliance. including layouts, details,
MDF (E Zero formaldehyde White Melamine to fixing types, finishes and
emissions limit.) concealed surfaces. fixtures for the complete
Refer Drawings for locations. shop built cabinetwork for
approval by the
superintendent.