Professional Documents
Culture Documents
Model 75 Gas Filter Separator LTR PDF
Model 75 Gas Filter Separator LTR PDF
GAS FILTER-SEPARATOR
IS0 9001
F E AT U R E S &
A D VA N T A G E S
75H 1st Stage
Filter/Coalescer
Cartridges
Inlet
Pipe
Riser
2nd Stage
Mist Extraction
Device
• Full-end closure eliminates
confined space entry
• Gas entry is on pipe risers versus
directly on cartridges
• Pipe Risers:
- Handle heavy liquid loads
without damaging the
cartridges or housing
- Knock down 90% of liquids
and wash away some solid
Outlet
contaminants thus enhancing
cartridge life Full End
Quick Opening
- Decrease turbulent gas entry Closure
into housing versus housings
with baffle design
- Provide individual sealing to 1st Stage Sump Sump 2nd Stage Sump
ensure properly sealed Divider Plate
75V
surface and allows cartridge to fine particulate contaminants are trapped and
self-center on the riser versus
removed from the gas stream. The cartridges
threaded rod design
also serve to coalesce the fine liquid
• Knife-edge sealing surface on
z-bar riser ensures tight seal of contaminant in the gas stream prior to
cartridge on the riser entering the second stage mist extraction
Full End
• PEACH® Advanced Technology device where the large coalesced droplets Quick Opening
cartridges are removed and clean, dry gas Closure
• 72” length cartridge option on exits the housing.
75H for increased solid
contaminant loading capacity
• Technology driven, high
1st Stage
performance 2nd stage mist
Removes 99.98% Filter/Coalescer
extraction device Cartridges
• Liquid removal sump with
of solids and liquids
two stages 1 micron and larger Pipe Riser
Inlet
1st Stage
Sump
2nd Stage
Sump
T Y P I C A L A P P L I C AT I O N S
• Compressor Suction • Contact Towers (Inlet & Overhead) • Gas Storage Facilities
• Landfill Gas • Plant Entrance Gas
75H & 75V
HOUSING
SPECIFICATIONS
2nd
• Materials of Construction
Second Stage Mist Extraction Device: - 304 Stainless Steel
- 304L Stainless Steel
PECOFacet’s exclusively designed and manufactured - 316 Stainless Steel
Wave Plate Vane mist extractor technology - 316L Stainless Steel
provides removal of liquid droplets. The wave plate - Low Temperature Materials
Wave Plate Vane • Non-Destructive Testing (NDT)
vane’s unique “wave” profile produces an enhanced
- Radiography
inertial impaction separation mechanism which - Magnetic Particle
provides high efficiency removal and low - Liquid Penetration
differential pressure while resisting plugging by - Ultrasonic
semi-solid type contaminants. The wave plate - Brinnel Hardness
- Charpy Impact
vane is built to resist extreme process upsets, as its
• Coating options
construction uses more support bolting than other - Sandblast: commercial, near
similar vane designs. white and white metal
- Paint: 2 & 3 coat corrosion
GAS OUT
resistant
• PECO SafeLock Closure®
• Auxiliary Packages in stock
• Flanged connections & sump
• PEACH® DynaSep™
filter/coalescer cartridge
GAS IN options
- Polypropylene media
- Metal hardware
GAS IN GAS OUT
- Various micron ratings
• 0.3 (black powder removal)
• 0.5
TOP VIEW VANE • 1 (standard)
•5
• 10
• High temperature cartridge
option FibrSep™ HTO
(Model FGGF) good to 550°F
FIELD PROVEN RESULTS
MODEL No. Cartridges Cartridge Size Nominal Shell Design Mist Extractor Type
75H = Horizontal 75V Diameter Pressure WP = Wave Plate
75V = Vertical (Inches) (PSIG)
312
324
336
75H
336
372
©2013 PECOFacet
PECOFacet has a
policy of continuous product
PECOFacet, PEACH, DynaSep and FibrSep are trademarks of PECOFacet. research and development and
® indicates a PECOFacet trademark registered in the USA and various reserves the right to change
other countries. design and specifications
PEACH® products protected by USA Patent Nos. 5827430 and 5893856 as without notice.
well as patents in various other countries.
pecofacet.com Refer to the website for the most current literature editions. FS-75-SL-01 (PFMW-201311)