Professional Documents
Culture Documents
CAT KLIPNA PUMPA Od Celika
CAT KLIPNA PUMPA Od Celika
CAT KLIPNA PUMPA Od Celika
3 Frame
Plunger Pump
Stainless
Steel
Models 231,241,271
Nickel Aluminum
Bronze
(Rails and Shaft Protector Sold Seperately)
Models 237,247,277
FEATURES
SPECIFICATIONS U.S. Measure Metric Measure
l Triplex design delivers high efficiency and a smooth, low-
pulsation flow. MODELS 231 AND 237
l Nickel Aluminum Bronze for added compatibility in intermittent Flow....................................................... 2.3 gpm (8.7 l/m)
duty sea water. Pressure Range..........................100 to 1500 psi (7 to 105 bar)
RPM..................................................... 1725 rpm (1725 rpm)
l 316 Stainless Steel for added strength and corrosion resis-
Stroke....................................................... 0.276” (7 mm)
tance with aggressive liquids and sea water.
l Installation flexibility with compact direct-drive or belt-drive.
MODELS 241 AND 247
l OptionalFPM, EPDM, IPFE, PTFE seals and o-rings for liquid Flow....................................................... 3.6 gpm (13.6 l/m)
compatibility. Pressure Range..........................100 to 1200 psi (7 to 85 bar)
RPM..................................................... 1725 rpm (1725 rpm)
COMMON SPECIFICATIONS Stroke....................................................... 0.433” (11 mm)
Bore.......................................................... 0.709” (18 mm) MODELS 271 AND 277
Inlet Pressure Range...............Flooded to 60 psi (Flooded to 4 bar) Flow....................................................... 3.5 gpm (13.2 l/m)
Crankcase Capacity.................................. 15 oz. (.45 L) Pressure Range..........................100 to 1500 psi (7 to 105 bar)
Maximum Liquid Temperature.................. 160°F (71°C) RPM..................................................... 1420 rpm (1420 rpm)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Stroke....................................................... 0.500” (12.7 mm)
Inlet Ports (2)...................................... 1/2” NPTF (1/2” NPTF)
Discharge Ports (2)............................. 3/8” NPTF (3/8” NPTF)
Pulley Mounting................................. Either Side (Either Side) ELECTRIC HORSEPOWER REQUIREMENTS
Shaft Diameter.......................................... 0.650” (16.5 mm) MODEL FLOW PRESSURE MOTOR PULLEY SIZE
Weight................................................... 13.4 lbs. (6.1 kg) psi psi psi Using 1725 RPM Motor &
1000 1200 1500 Std. 5.0” Pump Pulley O.D.
Dimensions.......................... 10.24 x 8.78 x 5.35” (260 x 223 x 136 mm) U.S. bar bar bar rpm Pulley
gpm l/m 70 85 105 O.D.
271, 277 3.5 13.2 2.4 2.9 3.6 1420 4.1
All High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) 3.0 11.4 2.1 2.5 3.1 1240 3.5
and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief 231, 237 2.3 8.7 1.6 1.9 2.4 1725 Direct Drive
devices could result in personal injury or damage to pump or property. CAT PUMPS does not
assume any liability or responsibility for the operation of a customer’s high pressure system.
241, 247 3.6 13.6 2.5 3.0 N/A 1725 Direct Drive
Read all CAUTIONS and WARNINGS before commencing service or operation of any high DETERMINING Rated gpm = “Desired” gpm
pressure system. The CAUTIONS and WARNINGS are included in each service manual and with THE PUMP R.P.M. Rated rpm “Desired” rpm
each Data sheet. CAUTIONS and WARNINGS can also be viewed online at
www.catpumps.com/cautions-warnings or can be requested directly from CAT PUMPS.
DETERMINING gpm x psi = Electric Brake
THE REQUIRED H.P. 1460 H. P. Required
DETERMINING Motor Pulley O.D. = Pump Pulley O.D.
MOTOR PULLEY SIZE Pump rpm Motor rpm
See complete Drive Packages [Inclds: Pulleys, Belts, Hubs, Key] Tech Bulletin 003.
Refer to pump Service Manual for repair procedure and additional technical information.
Models
Stainless Steel - 231, 241, 271
Nickel Aluminum Bronze - 237, 247, 277
July 2010
Discharge
231 237
241 247
271 MATL 277 MATL
290 6124 — 6124 — Liquid Gasket (3 oz.) 1
299 814823 SS 815262 NAB Head, Complete 1
300 30983 NBR 30983 NBR Kit, Seal (Inclds: 97,106,125,143,154,155, 159,165) 1
33609 FPM 33609 FPM Kit, Seal (Inclds: 97,106,125,143,154,155,159,165) 1
u 33914 EPDM* u 33914 EPDM* Kit, Seal (Inclds: 97,106,125,143,154,155,159,165) 1
33915 HT 33915 HT Kit, Seal, Hi Temp (Inclds: 97,106,125,143,154,155,159,165) 1
76660 IPFE 76660 IPFE Kit, Seal (Inclds: 97,106,125,143,154,155,159,165) 1
310 30982 NBR 30982 NBR Kit, Valve (Inclds: 143,154,155,164,165,166,167,168) 1
31216 FPM 31216 FPM Kit, Valve (Inclds: 143,154,155,164,165,166,167,168) 1
u 31217 EPDM u 31217 EPDM Kit, Valve (Inclds: 143,154,155,164,165,166,167,168) 1
76690 IPFE 76690 IPFE Kit, Valve (Inclds: 143,154,155,164,165,166,167,168) 1
350 30696 STZP 30696 STZP Pliers, Reverse 1
390 711500 — 711500 — C.A.T. (Inlet pressure stabilizer for R.O. and boosted inlet Applications) 1
391 711502 — 711502 — Adapter (2 per C.A.T.) (See Data Sheet for complete selection) 2
392 701818 SS 701818 SS Elbow Assy used with adapter Assy 711502 1
— 6575 — 6575 — Plunger Pump Service DVD 1
— 6107 — 6107 — Oil, Bottle (21 oz.) ISO 68 Hydraulic 1
(Fill to specified crankcase capacity prior to start-up)
Bold print part numbers are unique to a particular pump model. Italics are optional items. u Silicone oil/grease required.
R components comply with RoHS Directive. *Review individual parts in each kit for materialcode identification.
View Tech Bulletins 002, 003, 008, 024, 033, 034, 036, 043, 047, 049, 052, 053, 067, 073, 074, 077,083 and 104 for additional information.
C.A.T. highly recommended for pressurized inlet, R.O. and Industrial applications.
MATERIAL CODES (Not Part of Part Number): ABS=ABS Plastic AL=Aluminum CC=Ceramic CM=Chrome-Moly
EPDM=Ethylene Propylene Diene Monamer FCM=Forged Chrome-moly FPM=Fluorocarbon HT=Hi-Temp Special IPFE= I-Perflouroelastomer PTFE (EPDM Alternative)
NAB=Nickel Aluminum Bronze NBR=Medium Nitrile (Buna-N) PTFE=Pure Polytetrafluoroethylene PVDF=Polyvinylidene Fluoride S=304SS SS=316SS SFTA=Special
Blend PTFE SNG=Special Blend (Buna) SSZZ=316SS/Zamak STCP=Steel/Chrome Plated STL=Steel STZP=Steel/Zinc Plated TNM= Special High-Strenght
Models 231, 241, 271, 237, 247, 277
5 3
2 4 1 6
1 Special concentric, high density, pol- 3 100% wet seal design adds to service 5 Specially formulated, CAT PUMP
ished, solid ceramic plungers provide a life by allowing pumped liquids to cool exclusive, Hi-Pressure Seals offer
true wear surface and extended seal life and lubricate on both sides. unmatched performance and seal life.
2 Manifolds are a high tensile strength 4 Stainless steel valves, seats and
nickel aluminum bronze or 316 stainless springs provide corrosion-resistance,
steel for long term, continuous duty. ultimate seating and extended life.