Professional Documents
Culture Documents
Type BR by Lindapter 1118 PDF
Type BR by Lindapter 1118 PDF
Type BR
A basic clamp for securing low speed rail or steel beams with
either parallel or tapered flanges up to 8°. The tail is available
in two lengths and spans slotted clearance holes.
GIRDER CLAMPS
T
Clamping
Area Y X
RAIL FIXINGS
Z
Material: Malleable iron, zinc plated / hot dip galvanised.
LIFTING POINTS
BR16 M16 7.3 1.5 147 30 16 6 8 16 35
BR20 M20 14.7 3.0 285 36 19 7 10 19 42
* Torque figures based on bolts / setscrews in an unlubricated condition. For further information on lubricated fasteners see page 70.
HOLLO-BOLT
Type CW Packing Combinations for Type BR For thicker flanges please
(For rails up to and including 8o slope) contact Lindapter.
5 S - - - - - - - - - - -
6 M - - - S - - - - - - -
Mild steel, zinc plated / hot dip galv. Z
7 S 1 - - S - - - S - - -
FLOOR FIXINGS
Product Code Bolt Size Z Dimension T (mm) 8 M 1 - - M - - - S - - -
9 S 2 - - S 1 - - S - - -
CW12 M12 2.5
10 S 2 - - S 1 - - M - - -
CW16 M16 3 11 M 2 - - M 1 - - S 1 - -
CW20 M20 4 12 M - 1 - S 2 - - S 1 - -
13 S 1 1 - S 2 - - S 1 - -
14 M 1 1 - S - 1 - M 1 - -
Type P1 short / 15 S 2 1 - S - 1 - S 2 - -
Type P2 short 16 S 2 1 - M - 1 - S 2 - -
SUPPORT FIXINGS
17 M 2 1 - S 1 1 - S - 1 -
18 M 2 1 - S 1 1 - M 2 - -
T
19 S 1 - 1 M 1 1 - S 3 - -
20 M 1 - 1 S 2 1 - M - 1 -
21 M 1 - 1 S 2 1 - M - 1 -
Z 22 S - 1 1 S - - 1 M 3 - -
Mild steel, malleable iron, zinc plated / hot dip galv. 23 M 2 - 1 M - - 1 M 3 - -
24 M - 1 1 M - - 1 M 1 1 -
Product Code Bolt Size Z Dimension T (mm)
25 S 1 1 1 S 1 - 1 S 2 1 -
DECKING FIXINGS
P1S12 M12 6 26 M 1 1 1 S 1 - 1 S 2 1 -
P1S16 M16 8 27 S 2 1 1 M 1 - 1 S - - 1
P1S20 M20 10 28 S - - 2 S 2 - 1 M 2 1 -
29 S - - 2 S 2 - 1 M 2 1 -
P2S12 M12 12
30 M - - 2 M 2 - 1 M - - 1
P2S16 M16 16 31 S 1 - 2 M 2 - 1 S 1 - 1
P2S20 M20 20
S = BR short M = BR medium CW = Type CW P1S = P1 short P2S = P2 short
®
© Lindapter International 2018 www.Lindapter.com +44 (0) 1274 521444