Professional Documents
Culture Documents
Sensepoint XCD Brochure
Sensepoint XCD Brochure
Sensepoint XCD Brochure
One-Stop Shop
• Flammable (catalytic or infrared), toxic The Sensepoint XCD range provides
and oxygen versions available
• New and retrofit applications comprehensive monitoring of flammable,
• Suitable for indoor or outdoor use
• Stainless steel or aluminium toxic and Oxygen gas hazards in potentially
explosion-proof housing options
• IP66 as standard explosive atmospheres, both indoors and
Proven and Reliable
Sensor Technology outdoors. Users can modify detector
• SurecellTM electrochemical sensors
• Poison immune infrared sensors
operation using the LCD and magnet
• Poison resistant catalytic bead sensors
• Long life sensors switches without ever needing to open the
Global Approvals unit. This enables one-man, non-intrusive
• US and Latin America, European,
Canadian and Asian
• Compliant with UL, INMETRO, ATEX,
operation and reduces routine maintenance
IECEx, CSA, KTL, PA, GB and CCCF standards time and costs.
Easy to Use A tri-color backlit LCD clearly indicates the Sensepoint XCD has an integral mounting plate
• User friendly and intuitive tri-color backlit display
unit’s status at a glance, even from a distance. for surface mounting or can be mounted to a
with digits, bar graph and icons
A steady green backlight indicates normal horizontal or vertical pipe using the optional
• Fully configurable via magnetic switches
operation, flashing yellow indicates fault and pipe mounting bracket. Electrical installation
• Optional remote sensor mounting
flashing red indicates an alarm. can be made using either conduit or cable
• Selectable sink or source 4-20mA output
with suitable mechanical protection. Two M20
• Auto-inhibit during maintenance All detectors are supplied pre-configured or ¾”NPT entries are provided (depending
• MODBUS communications for remote and include 2 programmable alarm relays, on certification). A weatherproof cap is also
diagnostics/configuration 1 programmable fault relay as well as an included for use in the harshest outdoor
industry standard 4-20mA output (sink or conditions. Other optional accessories include
Cost Effective source selectable) and MODBUS.
• Common transmitter platform a sunshade/deluge protection, duct mounting
• Minimal training required The scale, range, relay operation, alarm set kit, collecting cone and remote mounting
• Reduced spares point and electronic tag number of the detector sensor socket.
• Non-intrusive, one-man operation can be adjusted using the transmitter's LCD Sensepoint XCD ensures easy installation
• Plug-in sensor replacement and non-intrusive magnetic switches. Outputs and the fastest routine operation by removing
• MODBUS multi drop option offers cabling savings are automatically inhibited during adjustment, the need for hot work permits in hazardous
thereby reducing the risk of false alarm at the areas. Using easy to replace plug-in sensors,
Simple Installation control panel during maintenance.
• Plug-in display module removes to give access downtime is also reduced and on-going costs
to terminal area are minimized through the use of poison
• Integral mounting bracket resistant flammable sensors, poison immune
• 2 x M20 or ¾” NPT cable/conduit entries infrared Hydrocarbon sensors and patented
(certification dependent) Surecell™ toxic sensors.
• Removable plug/socket type terminal blocks for 8
11
ease of wiring
4 5
• Sink/source switch to suit preferred
wiring topology
Range of Optional Accessories 10
• Remote sensor mounting kit
• Remote sensor gassing kit 3
• Duct mounting kit 2
• Calibration gas flow housing 1
• Collecting cone
1 Cover
Typical Applications 2 Display module
6 3 Terminal area
4 Blanking plug
• Industrial manufacturing facilities
5 Transmitter
• Power plants
• Refineries and chemical plants 7 6 Plug-in XCD sensor
• Waste water facilities
• Onshore oil and gas terminals 7 Sensor retaining ring
• Utilities
• Production platforms 8 Integral mounting plate
• Food and beverage production
• Exploration and drilling 9 Weather protection assembly
9 10 Cable/conduit entry (x2)
11 Certification label
Sensepoint XCD Overview
There are three different types of the XCD Sensepoint XCD Sensor Families, Gases and Ranges
transmitter for use with three different families
of sensors. User Selectable Default Selectable Cal
Gas Steps Default Cal Point
Full Scale Range Range Gas Range
The mV type transmitter is for use with the Catalytic Bead Sensors
mV family of XCD sensors including catalytic
Flammable 1 to 8* 20.0 to 100.0%LEL 100%LEL 10%LEL 50%LEL
sensors to detect flammable gases in the
range 0-100%LEL and infrared (IR) sensors Infrared Sensors
mV
for detection of Hydrocarbon gases in the Methane 20.0 to 100.0%LEL 100%LEL 10%LEL 50%LEL
Sensor Family
range 0-100%LEL and 0-100%Vol*, as well as Propane 50%Vol.
30 to 70% of selected
Carbon Dioxide (CO2) in the range 0-2%Vol. Carbon Dioxide 2%Vol. 2%Vol. 0.1%Vol. full scale range 1%Vol.
The EC type transmitter is for use with Electrochemical Sensors
the EC family of XCD sensors including EC Hydrogen Sulfide 10.0 to 100.0ppm 50.0ppm 0.1ppm 10ppm
Carbon Monoxide (CO), Hydrogen Sulfide,
Carbon Monoxide 100 to 1,000ppm 300ppm 100ppm 100ppm
(H2S) and Hydrogen (H2).
Hydrogen 1,000ppm only 1,000ppm n/a 500ppm
The Oxygen transmitter is for use with the
O2
IR Methane %Vol*
EC H2S
EC CO
EC H2
EC O2
DS01082_v1 9/12
© 2012 Honeywell Analytics