Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 87

Validate Print Help Percentage BoQ

Tender Inviting Authority: Superintending Engineer 22nd Circle, UP Jal Nigam, Mirzapur
Name of Work: CONSTRUCTION OF 10 M DIA INTAKE WELL WITH FOOTBRIDGE, SEDIMENTATION TANK OF 7500 KL CAPACITY, 60 MLD CAPACITY WTP,
SUPPLYING LAYING AND JOINTING OF FEEDER MAINS, RISING MAINS AND DISTRIBUTION SYSTEM, OVER HEAD TANKS AND APPURTENANT (E/M)
WORKS IN CITY MIRZAPUR-CUM-VINDHYACHAL
UNDER AMRUT PROGRAMME
Contract No: 342/Q-1/19 DATED-25.01.2018
Name of
the Gannon Dunkerley & Co. Ltd.
Bidder/ B-228, Okhla Industrial Area,
Bidding Phase-I, New Delhi-110020.
Firm /
Company
:
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name
and Values only )

NUMBER TEXT #
NUMBER # TEXT # NUMBER NUMBER # TEXT #
#

Estimated Rate
S. TOTAL AMOUNT TOTAL AMOUNT
Item Description Quantity Units in
No. With Taxes In Words
Rs. P

1 2 4 5 6 54 55
1 CONSTRUCTION OF INTAKE WELL
Investigation, Planning, Design and Construction of CONSTRUCTION OF 10 M DIA INTAKE WELL WITH
FOOTBRIDGE up to 50 m with all necessary equipment & Appurtenant Works, including Electrical works,
including supply of all materials, labor, tools and plants etc..

Provision for piping work for flushing choking material from the inlet pipe complete as per instruction of
1.01 1 No. 71095412.00 #VALUE! #VALUE!
engineer in charge. Provision for inlet pipe of 750 mm dia (4x15m). Supply and fixing of Kirloskar valves 5 nos
of Pn01 of dia 750 mm with spindle/wheel with all mountings and accessories complete. Supply and fixing of
M.S. Ladder.

Provision for River training and protection works from Intake works of WTP to River Bank
1.02 1 Job 17302364.00 #VALUE! #VALUE!

2 PRE-SEDIMENTATION TANK

Investigation, Planning, Design and Construction of CONSTRUCTION OF PRE-SEDIMENTATION TANK of 7500


KL(2 nos. of 3750 KL each) capacity of with De-sludging Arrangement complete with all mountings and 7500
2.01 Accessories,including construction of INLET CHAMBER including supply of all materials, labour, tools and K.L. 6716.50 #VALUE! #VALUE!
plants etc.

3 Water Treatment Plant 60MLD

Page 1 of 87
Investigation, Planning and design including supply of all materials, labour, tools and plants and erect
Treatment Works comprising of /Rapid Mix/Vertical Flow Clarifloculator / Rapid Gravity Filter Back Wash
Arrangement Gaseous chlorinator/Administrative Building(2 storey of 200sqm)/ RCC CWR of 1300 KL capacity,
3.01 Internal drainage and setting up of Water testing Laboratory, Automatisation of WTP unit with PLC based 60 MLD 4797500.00 #VALUE! #VALUE!
SCADA system with all necessary equipment & Appurtenant Works of 60.00 MLD capacity at Treatment Works
proposed in Mirzapur Nagar Palika Parishad area District- Mirzapur. Note: The list of all Civil units included in
WTP are given in Vol-I under SCOPE OF WORK (ref. page no. ----). Bidders shall quote their rates accordingly.

4 RCC CLEAR WATER RESERVOIR CUM PUMP HOUSE / ELECTRIC POWER SUB STATI

Design and construction of RCC CWR 1100 KL capacity and depth 4M in Zone-1 including supply of materials,
4.01 1 Nos 10026775.00 #VALUE! #VALUE!
tools and plants completed in all aspects as per the direction of Engineer in Charge.

Design and construction of RCC CWR 500 KL capacity and depth 4M in Zone-2A including supply of materials,
4.02 1 Nos 6716500.00 #VALUE! #VALUE!
tools and plants completed in all aspects as per the direction of Engineer in Charge.

Design and construction of RCC CWR 400 KL capacity and depth 4M in Zone-2B including supply of materials,
4.03 tools and plants completed in all aspects as per the direction of Engineer in Charge. 1 Nos 5757000.00 #VALUE! #VALUE!

Design and construction of RCC CWR 800 KL capacity and depth 4M in Zone-4 including supply of materials,
4.04 tools and plants completed in all aspects as per the direction of Engineer in Charge. 1 Nos 7676000.00 #VALUE! #VALUE!

Design and construction of RCC CWR 450 KL capacity and depth 4M in Zone-5A including supply of materials, 1
4.05 tools and plants completed in all aspects as per the direction of Engineer in Charge. Nos 6044850.00 #VALUE! #VALUE!

Design and construction of RCC CWR 200 KL capacity and depth 4M in Zone-5B including supply of materials,
4.06 tools and plants completed in all aspects as per the direction of Engineer in Charge. 1 Nos 2878500.00 #VALUE! #VALUE!

Design and construction of RCC CWR 450 KL capacity and depth 4M in Zone-6 including supply of materials, 1
4.07 tools and plants completed in all aspects as per the direction of Engineer in Charge. Nos 6044850.00 #VALUE! #VALUE!

Supply all materials, labour, T & P construction pump house over CWR of 5 mts height at site of RCC CWR at
4.08 Treatment and Zonal Water works No.1,2A,2B,3,4,5A,5B and 6 completed in all aspects as per the direction of 7 Nos 869307.00 #VALUE! #VALUE!
Engineer in Charge.

Supply all materials, labour, T & P and plants and construction electric power sub station room size 8.0M x
4.09 5.0M x 4.0M to control panel/ switches/ mountings and accessories at intake works and Treatment works 2 Nos 904808.50 #VALUE! #VALUE!
completed in all aspects as per the direction of Engineer in Charge.

5 BOUNDARY WALL, APPROACH ROAD AND GATE


5.01 Dismantaling of Plaster from old Pumphouse Inner & Outer Sides, Ceiling & Roof etc. 7 Job 2098.91 #VALUE! #VALUE!

Page 2 of 87
12mm thick plaster with cement, fine sand mortar in 1:6 proportion overbrick work of Old Pump House
5.02 including supply of all materials labour, and T&P etc required for proper completion of the work. 1890 Sqm 88.53 #VALUE! #VALUE!

Construction of boundary wall around water works and pump houses including supply all Materials, Labour,
5.03 340 M 2686.60 #VALUE! #VALUE!
Tools and Plants etc. complete.

Supply & fixing of 3.60 M wide MS Gate including fabrication and supply of steel and construction of boundary
5.04 10 No. 22668.19 #VALUE! #VALUE!
pillars all complete.

Supply & fixing of M.S. Wicket Gate1.20 meter wide including fabrication and supply of steel and construction
5.05 10 No. 13265.09 #VALUE! #VALUE!
of boundary pillars all complete.

Construction of brick on edge approach road including supply of all materials, labour, tools and plants etc.
5.06 125 Sqm. 430.64 #VALUE! #VALUE!
complete.

5.07 Filling of earth of lower portion including leveling and dressing at water works. 75 Cum 230.04 #VALUE! #VALUE!

5.08 Provision for arboriculture for development of water works. 10 Nos 1259.34 #VALUE! #VALUE!

6 Zonal RCC Overhead Tanks

Investigation, design including Supply of all the materials, labour, T&P and soil bearing capacity test etc.
complete and construction of a RCC OverHead Tank above ground level including 1.00 m wide PCC apron
around with 15cm semicircular PCC drain, One meter wide RCC staircase from ground level up to balcony to
top dome and inside the tank body, one meter wide RCC Balcony around the tank at junction point of vertical
and conical wall with proper railing of 20mm dia medium quality GI Pipe in three rows on both sides of
6.01 staircase, balcony and at the top dome and each landing supported on proper ventilator at top dome, water
level indicator, lightening conductor as per latest ISS and electricity rules 0.60m dia medium pattern CI
manhole cover hinged with locking arrangement supply and fixing and jointing vertical pipes for inlet, outlet
overflow and washout with all jointing material for proper completion and other appurtenant works including
excavation in all type of soil. Painting of all concrete surface and steel pipe works with three coats of approved
quality paint.

6.02 FOR ZONE- 1 (Civil Line) (1100KL/ 18 M staging) 1 Nos 9858384 #VALUE! #VALUE!

6.03 FOR ZONE- 2B (Wellsley Ganj) (2250KL/ 18 M staging) 1 Nos 20065104 #VALUE! #VALUE!

6.04 FOR ZONE- 4 (Chetganj) (2100KL/ 18 M staging) 1 Nos 18733793 #VALUE! #VALUE!

6.05 FOR ZONE- 6 (Vindyachal) (1350KL/ 20 M staging) 1 Nos 12270969 #VALUE! #VALUE!

7 Staff Quarters
Supply all materials, labours Tools and plants for construction of a set of single room staff quarter as per
7.01 Departmental drawing including Brickwork, Plastering, Painting etc. complete in all aspects as per the 4 Nos 1076559.00 #VALUE! #VALUE!
direction of Engineer in Charge.

8 Bulk Water Meters

Supply and Installation of Bulk Water Meters including testing etc. completed in all aspects as per the
8.01 direction of Engineer in Charge

Page 3 of 87
8.02 150mm 1 Nos 30224.25 #VALUE! #VALUE!

8.03 200mm 6 Nos 37635.43 #VALUE! #VALUE!

8.04 300mm 5 Nos 60355.43 #VALUE! #VALUE!

8.05 400mm 9 Nos 95383.90 #VALUE! #VALUE!

9 Ground Water Recharge


9.01 Construction of drain for collection of water throw out the campus rate as per unit Estimate. 160 m 1535.20 #VALUE! #VALUE!

9.02 Construction of settling tank as per type design (As per unit estimate). 4 Nos 172230.25 #VALUE! #VALUE!

Construction of 110mm bore hole for 30 M depth and lowring PVC plain 18M and 110 mm PVC slatted -12M.
9.03 Total 30M (As per Unit Estimate). 4 Job 11609.95 #VALUE! #VALUE!

9.04 Construction of Semi Circular Drain/Drainage works 40 m 885.21 #VALUE! #VALUE!

Leveling and dressing of water work compound for proper slope for harvesting and rainwater with filling of
9.05 additional earth etc. all complete. 4 Job 7843.24 #VALUE! #VALUE!

10 DISTRIBUTION SYSTEM

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket as per IS
11 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and
insurance etc. with loading, unloading and stacking all complete

12 HDPE Pipe PE-100

12.01 90 mm dia 113926 m 171 #VALUE! #VALUE!

12.02 110 mm dia 8924 m 242 #VALUE! #VALUE!

12.03 140 mm dia 12889 m 397 #VALUE! #VALUE!

12.04 160 mm dia 8273 m 516 #VALUE! #VALUE!

13 D.I. Pipe Class K-7

13.01 200 mm dia 16604 m 1203 #VALUE! #VALUE!

13.02 250 mm dia 6295 m 1584 #VALUE! #VALUE!

13.03 300 mm dia 4119 m 2015 #VALUE! #VALUE!

Page 4 of 87
13.04 350 mm dia 2606 m 2443 #VALUE! #VALUE!

13.05 400 mm dia 2316 m 3072 #VALUE! #VALUE!

13.06 450 mm dia 570 m 3539 #VALUE! #VALUE!

13.07 600 mm dia 1127 m 5453 #VALUE! #VALUE!

Page 5 of 87
14 Supply of specials for above Pipes.

14.01 HDPE Pipe PE-100 1 Lumpsum 1549104 #VALUE! #VALUE!

14.02 D.I. Pipe Class K-7 1 Lumpsum 5988788 #VALUE! #VALUE!

Carting of following size & type of pipes and specials from store to site of work and lowering them into the
15 trenches and laying true to alignment and gradient and jointing etc. complete including testing of pipe lines
and cutting of pipes.

16 HDPE Pipe PE-100

16.01 90 mm dia 113926 m 24 #VALUE! #VALUE!

16.02 110 mm dia 8924 m 26.00 #VALUE! #VALUE!

16.03 140 mm dia 12889 m 29 #VALUE! #VALUE!

16.04 160 mm dia 8273 m 37 #VALUE! #VALUE!

17 D.I. Pipe Class K-7

17.01 200 mm dia 16604.000 m 67 #VALUE! #VALUE!

17.02 250 mm dia 6295.000 m 89 #VALUE! #VALUE!

17.03 300 mm dia 4119.000 m 116 #VALUE! #VALUE!

17.04 350 mm dia 2606.000 m 135 #VALUE! #VALUE!

17.05 400 mm dia 2316.000 m 164 #VALUE! #VALUE!

17.06 450 mm dia 570.000 m 197 #VALUE! #VALUE!

17.07 600 mm dia 1127.000 m 301 #VALUE! #VALUE!

Excavation of earth for pipe line trenches in all kinds of soils including shoring, shuttering, dewatering of
trenches (if necessary) with lift upto 1.5 and lead upto 50M filling back the earth into trenches including
18 watering, ramming and disposal of surplus material with in 50M lead etc. complete as per the directions of 145500.000 Cum 165 #VALUE! #VALUE!
Site Engineer.The size of trench excavation for laying of pipeline shall be taken as following:
Width = Dia of pipe plus 300mm om either side. Depth = Dia of pipe plus 1000mm.

Page 6 of 87
Supply of following sizes C.I.D./F Sluice valve including F.O.R. destination and taxes and insurance etc.
19 complete as per relevant IS.

20 C. I. D/F Sluice Valve

20.01 80 mm dia 63 Nos 5657 #VALUE! #VALUE!

20.02 100 mm dia 6 Nos 6677 #VALUE! #VALUE!

20.03 125 mm dia 7 Nos 8347 #VALUE! #VALUE!

20.04 150 mm dia 3 Nos 10016 #VALUE! #VALUE!

20.05 200 mm dia 8 Nos 15302 #VALUE! #VALUE!

20.06 250 mm dia 8 Nos 23927 #VALUE! #VALUE!

20.07 300 mm dia 14 Nos 45906 #VALUE! #VALUE!

20.08 350 mm dia 2 Nos 57498 #VALUE! #VALUE!

20.09 400 mm dia 1 Nos 83094 #VALUE! #VALUE!

20.1 Scour Valve 100 mm dia 11 Nos 5657 #VALUE! #VALUE!

20.11 Fire Hydrant 80 mm dia 16 Nos 16693 #VALUE! #VALUE!

C.I. Single ball type Air Valve 9


20.12 15 mm dia Nos 2319 #VALUE! #VALUE!

Carting of following sizes C.I.D./F Sluice Valve and specials from store to site of work and lowering them into
21 the trenches, fixing in position and jointing them with pipelines and testing etc. complete including supply
of jointing materials.

22 C. I. D/F Sluice Valve

22.01 80 mm dia 63 Nos 658 #VALUE! #VALUE!

22.02 100 mm dia 6 Nos 864 #VALUE! #VALUE!

22.03 125 mm dia 7 Nos 935 #VALUE! #VALUE!

22.04 150 mm dia 3 Nos 1353 #VALUE! #VALUE!

Page 7 of 87
22.05 200 mm dia 8 Nos 1466 #VALUE! #VALUE!

22.06 250 mm dia 8 Nos 2317 #VALUE! #VALUE!

22.07 300 mm dia 14 Nos 2450 #VALUE! #VALUE!

22.08 350 mm dia 2 Nos 3295 #VALUE! #VALUE!

22.09 400 mm dia 1 Nos 5265 #VALUE! #VALUE!

22.1 Scour Valve 100 mm dia 11 Nos 658 #VALUE! #VALUE!

22.11 Fire Hydrant 80 mm dia 16 Nos 232 #VALUE! #VALUE!

C.I. Single ball type Air Valve


22.12 15 mm dia 9 Nos 445 #VALUE! #VALUE!

Supply of all materials and construct following chambers as per type design with supply of all labour, T&P
23 etc. complete.

23.01 Masonary Type 25 Nos 11871 #VALUE! #VALUE!

23.02 Fire Hydrant Chamber 16 Nos 8347 #VALUE! #VALUE!

23.03 Air Valve Chamber 9 Nos 5008 #VALUE! #VALUE!

23.04 Surface Box Type 79 Nos 3802 #VALUE! #VALUE!

24 STAND POSTS

Construction of Single Tap Pillar Type Stand Post as per departmental type design including supply of all
24.01 materials, labour T&P etc. required for proper completion of work. 30 Nos 4822 #VALUE! #VALUE!

Construction of Tank Type Stand Post of 200 Litres capacity including supply of all materials, labour T&P etc. 8
24.02 required for proper completion of work. (U.E. attached) Nos 12984 #VALUE! #VALUE!

Dismantling of following type of road and stacking of useful materials including supply of all materials,
25 labour, T&P etc. complete.

25.01 BOE Road 1509 Sqm 61 #VALUE! #VALUE!

25.02 C.C. Road 2821 Sqm 230 #VALUE! #VALUE!

25.03 Bitumen Road 5263 Sqm 120 #VALUE! #VALUE!

Page 8 of 87
25.04 Interlocking 2610 Sqm 118 #VALUE! #VALUE!

26 Provision for Crossing of Road, Drain /Culvert. 150 Nos 3710 #VALUE! #VALUE!

Provision for Crossing of Railway Line by trenchless method and laying, jointing, testing of pipes etc. including 1
27 charges payable to Railways DEpartment complete in all aspects as per the direction of Engineer in charge. Nos 6955423 #VALUE! #VALUE!

28 RISING MAIN
Supplying & Stacking of D.I. pipes of Class K-7 of following dia as per I.S. 8329/2000 and its latest
29 amendments with jointing materials including for destination and all taxes and insurance etc. complete in all
respects as per the direction of Site Engineer.

29.01 450mm dia Class K-7 95 M 3515.72 #VALUE! #VALUE!

29.02 400mm dia Class K-7 80 M 3052.30 #VALUE! #VALUE!

29.03 300mm dia Class K-7 70 M 2002.01 #VALUE! #VALUE!

29.04 250mm dia Class K-7 65 M 1573.60 #VALUE! #VALUE!

29.05 200mm dia Class K-7 120 M 1194.94 #VALUE! #VALUE!

29.06 Supply of specials at 10% extra for above item no. 2 1 LS 96399.53 #VALUE! #VALUE!

Excavation of earth for pipe line trenches in all kinds of soils including shoring, shuttering, dewatering of
trenches (if necessary) with lift upto 1.5 and lead upto 50M filling back the earth into trenches including
30 watering, ramming and disposal of surplus material with in 50M lead etc. complete as per the directions of 540 Cum 163.00 #VALUE! #VALUE!
Site Engineer.The size of trench excavation for laying of pipeline shall be taken as following:
Width = Dia of pipe plus 300mm om either side. Depth = Dia of pipe plus 1000mm.

Carting of pipes and specials from store to site of work of following D.I. Pipe with specials, lowering the same
into trenches and laying true to alignment and gradient including jointing properly testing of pipe line (it is
31 excluding the cost of trenching but including cutting of pipe for making the length) etc. complete in all
respects as per the direction of Site Engineer

31.01 450mm dia 95 M 195.65 #VALUE! #VALUE!

31.02 400mm dia 80 M 162.94 #VALUE! #VALUE!

31.03 300mm dia 70 M 115.03 #VALUE! #VALUE!

31.04 250mm dia 65 M 88.58 #VALUE! #VALUE!

Page 9 of 87
31.05 200mm dia 120 M 66.20 #VALUE! #VALUE!

Supply of following sizes C.I. sluice valves with cap/Air Valve capable of with standing working pressure of 10
32 Kg/cm2 including F.O.R. destination and all taxes and insurance etc. complete.

32.01 300mm dia 5 No. 45604.89 #VALUE! #VALUE!

32.02 250mm dia 4 No. 20268.84 #VALUE! #VALUE!

32.03 200mm dia 4 No. 15201.63 #VALUE! #VALUE!

Carting of following sizes CI sluice valve /air valve from store to site of work lowering the same into trenches
33 and fixing in position and jointing the same with supply of all material and testing etc. complete.

33.01 300mm dia 5 No. 2434.34 #VALUE! #VALUE!

33.02 250mm dia 4 No. 2301.29 #VALUE! #VALUE!

33.03 200mm dia 4 No. 1456.20 #VALUE! #VALUE!

Supply of all materials and construct following type sluice valve chambers complete as per type design. (a)
34 Masonary Type S.V. Chamber 13 No. 11792.78 #VALUE! #VALUE!

Supply of all material, labour, T&P and construct RCC thrust blocks at the bends etc. complete. From 450mm 26
35 to 200mm No. 32245.88 #VALUE! #VALUE!

Page 10 of 87
36 Feeder Main and Appurtenant Works

Supply of D.I. Pipes of following size/wall thickness with I.S. 8329/2000 or its latest amendments with
37 jointing materials including for destination and all taxes and insurance etc. complete.

38 D.I. Pipe Class K-7

38.01 150 mm dia 410 m 940 #VALUE! #VALUE!

38.02 200 mm dia 150 m 1184 #VALUE! #VALUE!

38.03 300 mm dia 2620 m 1983 #VALUE! #VALUE!

38.04 350 mm dia 6050 m 2404 #VALUE! #VALUE!

38.05 400 mm dia 675 m 3024 #VALUE! #VALUE!

38.06 450 mm dia 3550 m 3483 #VALUE! #VALUE!

38.07 600 mm dia 1300 m 5367 #VALUE! #VALUE!

38.08 700 mm dia 1950 m 7363 #VALUE! #VALUE!

38.09 Supply of specials for above class K-7 D.I. Pipes 1 Lumpsum 5604591 #VALUE! #VALUE!

Excavation of earth for pipe line trenches in all kinds of soils including shoring, shuttering, dewatering of
trenches (if necessary) with lift upto 1.5 and lead upto 50M filling back the earth into trenches including
39 watering, ramming and disposal of surplus material with in 50M lead etc. complete as per the directions of 24600 Cum 162 #VALUE! #VALUE!
Site Engineer.The size of trench excavation for laying of pipeline shall be taken as following:
Width = Dia of pipe plus 300mm om either side. Depth = Dia of pipe plus 1000mm.

Carting from store to site of work following F.I. pipe with specials, lowering D.I. pipe with specials, lowering
40 the same into trenches and laying true to alignment and gradient including jointing properly testing of pipe
line (but excluding the cost of trenching and cutting of pipe for making the length) etc complete.

40.01 150 mm dia 410 M 46 #VALUE! #VALUE!

40.02 200 mm dia 150 M 66 #VALUE! #VALUE!

Page 11 of 87
40.03 300 mm dia 2620 M 114 #VALUE! #VALUE!

40.04 350 mm dia 6050 M 133 #VALUE! #VALUE!

40.05 400 mm dia 675 M 161 #VALUE! #VALUE!

40.06 450 mm dia 3550 M 194 #VALUE! #VALUE!

40.07 600 mm dia 1300 M 297 #VALUE! #VALUE!

40.08 700 mm dia 1950 M 381 #VALUE! #VALUE!

Supply of following sizes C.I. sluice valve with cap/Air Valve capable of with standing working pressure of 10
41 Kg/cm2 including F.O.R. destination and all taxes and insurance etc. complete.

42 Sluice Valve

42.01 150 mm dia 1 Nos 9858 #VALUE! #VALUE!

42.02 200 mm dia 3 Nos 15060 #VALUE! #VALUE!

42.03 250 mm dia 10 Nos 23549 #VALUE! #VALUE!

42.04 300 mm dia 3 Nos 45181 #VALUE! #VALUE!

42.05 400 mm dia 1 Nos 65261 #VALUE! #VALUE!

42.06 450 mm dia 2 Nos 81782 #VALUE! #VALUE!

42.07 Scour Valve 80 mm dia 3 Nos 7758 #VALUE! #VALUE!

42.08 Air Valve (single ball type) 80 mm dia with Mouting and accessoires 5 Nos 10953 #VALUE! #VALUE!

Carting of following sizes CI sluice valve/ air valve from store to site of work lowering the same into
43 trenches and fixing in position and jointing the same with supply of all material and testing etc. complete.

44 Sluice Valve

44.01 150 mm dia 1 Nos 1331 #VALUE! #VALUE!

Page 12 of 87
44.02 200 mm dia 3 Nos 1443 #VALUE! #VALUE!

44.03 250 mm dia 10 Nos 2280 #VALUE! #VALUE!

44.04 300 mm dia 3 Nos 2412 #VALUE! #VALUE!

44.05 400 mm dia 1 Nos 3995 #VALUE! #VALUE!

44.06 450 mm dia 2 Nos 5182 #VALUE! #VALUE!

44.07 Scour Valve 80 mm dia 3 Nos 850 #VALUE! #VALUE!

44.08 Air Valve (single ball type) 80 mm dia with Mouting and accessoires 5 Nos 913 #VALUE! #VALUE!

Dismentling of following type road and stacking of useful material and temporary resistatement of road
45 with old materials etc. complete.

45.01 Bitumen Road 6540 Sqm 118 #VALUE! #VALUE!

46 Supply of all materials and construct following type sluice valve chambers complete as per type design

46.01 Masonary Type chamber 8 No. 11683 #VALUE! #VALUE!

46.02 Surface Box type chamber 18 No. 3742 #VALUE! #VALUE!

46.03 Air valve chamber 10 No. 4929 #VALUE! #VALUE!

Provision for crossing of Nala/Culvert including making specials and supply of materials, labour T&P etc
47 complete. 8 Nos 13691 #VALUE! #VALUE!

Supply of all materials, labour T&P and construct RCC thrust blocks at the bends etc. complete and inclusive of 30
48 steel reinforcement works.From 700 mm to 300 mm Nos 31946 #VALUE! #VALUE!

Supply of all materials, labour T&P and construct RCC thrust blocks at the bends etc. complete and inclusive of 6
49 steel reinforcement works.From 200 mm to 150 mm Nos 5020 #VALUE! #VALUE!

50 VT PUMP FOR RAW WATER INTAKE AT INTAKE WELL

(A) Provision of Raw water oil lubricated solid shaft VT pump with 21000 LPM discharge at 37 MWC Bowl
Head, 30 meter column assly including sole plate, Thrust bearing, Motor stool and foundation bolts, Bowl, Bell
Mouth will have food grade 1 mm thick coating suitable for erosion, corrosion and galvanic protection. 4
51.01 (Coating suitability for potable water application certified by national lab) Nos 7196250.00 #VALUE! #VALUE!
(2W + 2S)

Page 13 of 87
51.02 (B) Vertical squirrel cage Induction Motors 0.415 KV, 300/6P for Above pumps. 4 Nos 1151400.00 #VALUE! #VALUE!

submersible Pump set


Provision of Submersible Horizontal pump set of capacity 1260 m³ /hr (21000 lpm), 45 m head with fully
submerged squirel cage induction motor (TEWC) of 4 pole, 300 HP/ 225 KW 3 phase 415 (+6% - 10%) volt,
enclosure I.P. 68, insulation F class with 40 m submersible cable as 2R X4CX 50 mm sq +2R X 3CX50 sqmm for
power & 1R X 20CX1 sqmm for control duly followed with susction strainer & suspended stool having MOC
52 with following specifications, 1 Nos 1919000.00 #VALUE! #VALUE!

M.S. fabricated dust & vermin proof of cubical type control panel consisting of one no. 1000 Amps. Incoming
ACB and five no. 600 Amps. Outgoing ACB with 2 Nos.M.C.C.B of 100 Amp. for light & fan including Ampere
meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, fuses etc.

53 Automatic soft starter Panel of 300 H.P. for above pumping plant. 4 Nos 263862.50 #VALUE! #VALUE!

54 Power wring & earthing material for double earthing. 1 Set 95950.00 #VALUE! #VALUE!

55 Main Piping & valves including common header (P.N. Rating 1.0)

56 Valves

56.01 450mm dia C.I.D.F. Sluice Valve – 4 No. 4 Nos 287850.00 #VALUE! #VALUE!

56.02 450mm dia C.I.D.F. Reflux Valve – 4 No. 4 Nos 254267.50 #VALUE! #VALUE!

56.03 600mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 508535.00 #VALUE! #VALUE!

Pipe fittings
a 600mm dia D.F. distance piece 1m long –4 No.
b 600mm dia D.F. distance piece 1.5m long – 4 No.
c 600mm dia D.F. distance piece 3.0 m long – 4 No.
57 d 600x600x450 mm dia C.I.D.F. Tee – 4 No. 11012 Kg 115.14 #VALUE! #VALUE!
e 450mm dia dismantling joint - 4 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

58 Spare Bowl assembly 2 Set 2014950.00 #VALUE! #VALUE!

59 Spares for motor, bearing etc. 1 Set 191900.00 #VALUE! #VALUE!

60 Spares for switch gear. 2 Set 191900.00 #VALUE! #VALUE!

61 Spare column assembly 1.0 m 4 Set 383800.00 #VALUE! #VALUE!

Page 14 of 87
62 Spare column assembly 0.5 m 4 Set 191900.00 #VALUE! #VALUE!

single gurder EOT crane with Traveling Trolley, 10 Ton capacity chain pulley Block with 40 mt. lift suitable for
63 10 mt. diameter sump. 1 Nos 479750.00 #VALUE! #VALUE!

64 Disigtal Type Pressure and water level Indicator gauges with fittings. 4 Set 19190.00 #VALUE! #VALUE!

65 Supply of 600mm dia size electronic flow meter. 1 Nos 771438.00 #VALUE! #VALUE!

66 400 Sq.mm 3⅓ core armoured Aluminum cable. (2RX50 Mt. X 4 Nos) 400 m 3118.38 #VALUE! #VALUE!

67 300 Sq.mm 3⅓ core armoured Aluminum cable (2RX75 Mt. X 4 Nos) 600 m 2686.60 #VALUE! #VALUE!

68 Fire extinguisher 4 Nos 7196.25 #VALUE! #VALUE!

69 Rubber resistance sheet. 2 Nos 3838.00 #VALUE! #VALUE!

70 Erection of Pumping plant. 4 Job 191900.00 #VALUE! #VALUE!

Page 15 of 87
71 Commissioning & Testing of pumping plant. 4 Job 383800.00 #VALUE! #VALUE!

72 Painting 1 Job 19190.00 #VALUE! #VALUE!

73 CLEAR WATER PUMPING PLANT FOR ZONE-1/2A/2B & ZONE- 3 AT TREATMENT

submersible Pump set


Provision of Submersible pump set of capacity 12600 lpm, 21 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 90 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable for power & control duly followed with susction strainer & suspended stool
having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
74 4 No. 1132210.00 #VALUE! #VALUE!
Protable stand - M.S. Fabricated (apoxy coated)
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(2W + 2S)

M.S. fabricated dust & vermin proof of cubical type extensible panel control panel consisting one no. 800
Amps ACB. Incoming and Three nos. 250 Amps. Four Nos. of 100 Amps & Three nos of 63 Amp.MCCBS 1 No.
75 including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector 479750.00 #VALUE! #VALUE!
switch, fuses etc.

76 Automatic soft starter panel of 90 H.P. suitable for above pumping plant. 4 No. 95950.00 #VALUE! #VALUE!

Main Piping & valves including common header (P.N. Rating 1.0)
77

Valves
78

350mm dia C.I.D.F. Sluice Valve – 4 No.


78.01 4 No. 168872.00 #VALUE! #VALUE!

350mm dia C.I.D.F. Reflux Valve – 4 No.


78.02 4 No. 172710.00 #VALUE! #VALUE!

450mm dia C.I.D.F. Reflex Valve (for common header) – 1 No.


78.03 1 No. 287850.00 #VALUE! #VALUE!

Page 16 of 87
Pipe fittings
a 450mm dia D.F. distance piece 1m long –4 No.
b 450mm dia D.F. distance piece 1.5m long – 4 No.
c 450mm dia D.F. distance piece 3.0 m long – 4 No.
79 d 450x450x350 mm dia C.I.D.F. Tee – 4 No. 5950 Kg 115.14 #VALUE! #VALUE!
e 350mm dia dismantling joint - 4 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

Electric opreated Traveling Trolley with chain pulley Block 3 ton 6 mt. lift
80 1 No. 239875.00 #VALUE! #VALUE!

Spares for switch gear.


81 1 Set 191900.00 #VALUE! #VALUE!

400 Sq.mm 3⅓ core armoured Aluminum cable.(2x 250m)


82 500 m 3118.38 #VALUE! #VALUE!

120 Sq.mm 3⅓ core armoured Aluminum cable.


83 200 m 1199.38 #VALUE! #VALUE!

Fire extinguisher
84 4 No. 7196.25 #VALUE! #VALUE!

Power wring & earthing material for double earthing.


85 1 Set 95950.00 #VALUE! #VALUE!

Rubber resistance sheet.


86 4 No. 3838.00 #VALUE! #VALUE!

Erection of Pumping plant.


87 4 Job 57570.00 #VALUE! #VALUE!

Commissioning & Testing of pumping plant.


88 4 Job 95950.00 #VALUE! #VALUE!

Page 17 of 87
Painting
89 1 Job 19190.00 #VALUE! #VALUE!

90 CLEAR WATER PUMPING PLANT FOR ZONE-4/5A/5B AT TREATMENT WORK.

submersible Pump set


Provision of Submersible pump set of capacity 5800 lpm, 22 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 40 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOC with fallowing specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated) 3 Nos
91 Lifting Chain - Alloy steel 585295.00 #VALUE! #VALUE!
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(2W + 1S)
M.S. fabricated dust & vermin proof of cubical type extensible panel control panel consisting one no. 600
Amps ACB. Incoming and Six nos. 200 Amps. Four Nos. of 63 Amps .MCCBS including Ampere meter, Volt
meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, fuses etc.

92 Auto soft starter panel of 40 H.P. for above pumping plants. 3 Nos 81557.50 #VALUE! #VALUE!

93 Main Piping & valves including common header

94 Valves

94.01 250mm dia C.I.D.F. Sluice Valve – 3 No. 3 Nos 67165.00 #VALUE! #VALUE!

94.02 250mm dia C.I.D.F. Reflux Valve – 3 No. 3 Nos 71962.50 #VALUE! #VALUE!

94.03 350mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 172710.00 #VALUE! #VALUE!

Pipe Fitting
a 350x350x250 mm dia C.I.D.F. Tee – 3 No.
b 350mm dia D.F. distance piece 1m long – 3 No.
c 350mm dia D.F. distance piece 1.5m long – 3 No.
95 d 350mm dia D.F. distance piece 3.0 m long – 3 No. 3200 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 3 No.
f Nut-Bolt & Rubber Packing - As required
g. Any other Item required for proper installation of above Pumps - Job

96 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 18 of 87
97 16 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.90 #VALUE! #VALUE!

98 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

99 Rubber resistance sheet. 1 Nos 3838.00 #VALUE! #VALUE!

100 Servo voltage stabilizer of suitable capacity 3 Nos 153520.00 #VALUE! #VALUE!

101 Erection of Pumping plant. 3 Job 57570.00 #VALUE! #VALUE!

102 Commissioning & Testing of pumping plant. 3 Job 47975.00 #VALUE! #VALUE!

103 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 19 of 87
104 CLEAR WATER PUMPING PLANT FOR ZONE-6 AT TREATMENT WORK.

submersible Pump set


Provision of Submersible pump set of capacity 1750 lpm, 20 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 12.5 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOC with fallowing specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated)
Lifting Chain - Alloy steel 3 Nos
105 Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze 278255.00 #VALUE! #VALUE!
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(2W + 1S)
M.S. fabricated dust & vermin proof of cubical type extensible panel control
panel consisting one no. 600 Amps ACB. Incoming and Six nos. 200 Amps. Four Nos. of 63 Amps .MCCBS
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector
switch, fuses etc.

106 Auto soft starter panel of 12.5 H.P. for above pumping plants. 3 Nos 47975.00 #VALUE! #VALUE!

107 Main Piping & valves including common header

108 Valves

108.01 200mm dia C.I.D.F. Sluice Valve – 3 No. 3 Nos 46056.00 #VALUE! #VALUE!

108.02 200mm dia C.I.D.F. Reflux Valve – 3 No. 3 Nos 51813.00 #VALUE! #VALUE!

108.03 250mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 71962.50 #VALUE! #VALUE!

Pipe Fitting
a 250x250x200 mm dia C.I.D.F. Tee – 3 No.
b. 250mm dia D.F. distance piece 1m long – 3 No.
c 250mm dia D.F. distance piece 1.5m long – 3 No.
109 d 250mm dia D.F. distance piece 3.0 m long – 3 No. 2050 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 3 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

110 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

111 16 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.90 #VALUE! #VALUE!

Page 20 of 87
112 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

113 Rubber resistance sheet. 1 Nos 3838.00 #VALUE! #VALUE!

114 Servo voltage stabilizer of suitable capacity 3 Nos 153520.00 #VALUE! #VALUE!

115 Erection of Pumping plant. 3 Job 57570.00 #VALUE! #VALUE!

116 Commissioning & Testing of pumping plant. 3 Job 47975.00 #VALUE! #VALUE!

117 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 21 of 87
118 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-1 (CIVIL LINES ZON

submersible Pump set


Provision of Submersible pump set of capacity 1200 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 15 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable for power & control duly followed with susction strainer & suspended stool
having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS 2
119 Protable stand - M.S. Fabricated (apoxy coated) Nos 287850.00 #VALUE! #VALUE!
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)

M.S. fabricated dust & vermin proof of cubical type panel control panel consisting one no. 600 Amps.
Incoming and six nos. 200 Amps. Outgoing with 4 Nos. M.C.C.B of 63 Amp. of light & fan & spares including
120 Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, 1 Nos 239875.00 #VALUE! #VALUE!
fuses etc.

121 Automatic soft starter Panel of 15 H.P. suitable for above pumping plant. 2 Nos 67165.00 #VALUE! #VALUE!

122 Main Piping & valves including common header

123 Valves

123.01 150mm dia C.I.D.F. Sluice Valve – 2 No. 2 Nos 27825.50 #VALUE! #VALUE!

123.02 150mm dia C.I.D.F. Reflux Valve – 2 No. 2 Nos 29744.50 #VALUE! #VALUE!

123.03 200mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 51813.00 #VALUE! #VALUE!

Pipe Fitting
a 200x200x150 mm dia C.I.D.F. Tee – 2 No.
b 200mm dia D.F. distance piece 1m long – 2No.
c 200mm dia D.F. distance piece 1.5m long – 2 No.
d 200mm dia D.F. distance piece 3.0 m long – 2 No.
124 e. 150mm dia dismantling joint - 2 No. 1100 Kg 115.14 #VALUE! #VALUE!
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

125 Traveling Trolley with chain pulley Block 2 ton 4 mt. lift 1 Nos 143925.00 #VALUE! #VALUE!

126 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 22 of 87
127 16 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.90 #VALUE! #VALUE!

128 Fire extinguisher 2 Nos 7196.25 #VALUE! #VALUE!

129 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

130 Rubber resistance sheet. 1 Nos 3838.00 #VALUE! #VALUE!

131 Servo voltage stabilizer of suitable capacity 2 Nos 153520.00 #VALUE! #VALUE!

132 Erection of Pumping plant. 2 Job 57570.00 #VALUE! #VALUE!

133 Commissioning & Testing of pumping plant. 2 Job 47975.00 #VALUE! #VALUE!

134 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 23 of 87
135 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-1 (CIVIL LINES ZON

submersible Pump set


Provision of Submersible pump set of capacity 2800 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 35 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOCwith following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated)
136 Lifting Chain - Alloy steel 2 No. 518130.00 #VALUE! #VALUE!
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)
M.S. fabricated dust & vermin proof of cubical type extensible panel control panel consisting one no. 600
Amps ACB. Incoming and Six nos. 200 Amps. Four Nos. of 63 Amps .MCCBS including Ampere meter, Volt
meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, fuses etc.

137 Automatic soft starter Panel of 35 H.P. suitable for above pumping plant. 2 No. 95950.00 #VALUE! #VALUE!

138 Main Piping & valves including common header

139 Valves

139.01 200mm dia C.I.D.F. Sluice Valve – 2No. 2 No. 46056.00 #VALUE! #VALUE!

139.02 200mm dia C.I.D.F. Reflux Valve – 2 No. 2 No. 51813.00 #VALUE! #VALUE!

139.03 250mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 No. 71962.50 #VALUE! #VALUE!

Pipe Fitting
a 250x250x200 mm dia C.I.D.F. Tee – 2 No.
b. 250mm dia D.F. distance piece 1m long – 2 No.
c 250mm dia D.F. distance piece 1.5m long – 2 No.
140 d 250mm dia D.F. distance piece 3.0 m long – 2 No. 1525 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 2 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

141 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

142 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 671.65 #VALUE! #VALUE!

Page 24 of 87
143 Fire extinguisher 2 No. 7196.25 #VALUE! #VALUE!

144 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

145 Rubber resistance sheet. 1 No. 3838.00 #VALUE! #VALUE!

146 Servo voltage stabilizer of suitable capacity 2 No. 153520.00 #VALUE! #VALUE!

147 Erection of Pumping plant. 2 Job 57570.00 #VALUE! #VALUE!

148 Commissioning & Testing of pumping plant. 2 Job 47975.00 #VALUE! #VALUE!

149 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 25 of 87
150 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-1 (CIVIL LINES ZON

submersible Pump set


Provision of Submersible pump set of capacity 3500 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 40 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated) 3
151 Lifting Chain - Alloy steel No. 652460.00 #VALUE! #VALUE!
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(2W + 1S)
M.S. fabricated dust & vermin proof of cubical type extensible panel control panel consisting one no. 600
Amps ACB. Incoming and Six nos. 200 Amps. Four Nos. of 63 Amps .MCCBS including Ampere meter, Volt
meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, fuses etc.

152 Automatic soft starter Panel of 40 H.P. suitable for above pumping plant. 3 No. 81557.50 #VALUE! #VALUE!

153 Main Piping & valves including common header

154 Valves

154.01 250mm dia C.I.D.F. Sluice Valve – 3 No. 3 No. 67165.00 #VALUE! #VALUE!

154.02 250mm dia C.I.D.F. Reflux Valve – 3 No. 3 No. 71962.50 #VALUE! #VALUE!

154.03 300mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 No. 103626.00 #VALUE! #VALUE!

Pipe Fitting
a 300x300x250 mm dia C.I.D.F. Tee – 3 No.
b 300mm dia D.F. distance piece 1m long – 3 No.
c 300mm dia D.F. distance piece 1.5m long – 3 No.
155 d 300mm dia D.F. distance piece 3.0 m long – 3 No. 2575 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 3 No.
f Nut-Bolt & Rubber Packing - As required
g. Any other Item required for proper installation of above Pumps - Job

156 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

157 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.90 #VALUE! #VALUE!

Page 26 of 87
158 Fire extinguisher 2 No. 7196.25 #VALUE! #VALUE!

159 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

160 Rubber resistance sheet. 1 No. 3838.00 #VALUE! #VALUE!

161 Servo voltage stabilizer of suitable capacity 3 No. 153520.00 #VALUE! #VALUE!

162 Erection of Pumping plant. 3 Job 57570.00 #VALUE! #VALUE!

163 Commissioning & Testing of pumping plant. 3 Job 47975.00 #VALUE! #VALUE!

164 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 27 of 87
165 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-2A (WELLSLEY GANJ

submersible Pump set


Provision of Submersible pump setof capacity 1000 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 15 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
withsuitable submersible cable as for power & control duly followed with susction strainer & suspended stool
having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS 2
166 Protable stand - M.S. Fabricated (apoxy coated) No. 287850.00 #VALUE! #VALUE!
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)

M.S. fabricated dust & vermin proof of cubical type panel control panel consisting one no. 400 Amps.
Incoming and six nos. 200 Amps. Outgoing with 4 Nos. M.C.C.B of 63 Amp. of light & fan & spares including 1
167 Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, No. 239875.00 #VALUE! #VALUE!
fuses etc.

168 Automatic soft starter Panel of 15 H.P. suitable for above pumping plant. 2 No. 67165.00 #VALUE! #VALUE!

169 Main Piping & valves including common header

170 Valves

170.01 150mm dia C.I.D.F. Sluice Valve – 2 No. 2 No. 27825.50 #VALUE! #VALUE!

170.02 150mm dia C.I.D.F. Reflux Valve – 2 No. 2 No. 29744.50 #VALUE! #VALUE!

170.03 200mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 No. 51813.00 #VALUE! #VALUE!

Pipe Fitting
a 200x200x150 mm dia C.I.D.F. Tee – 2 No.
b 200mm dia D.F. distance piece 1m long – 2No.
c 200mm dia D.F. distance piece 1.5m long – 2 No.
d 200mm dia D.F. distance piece 3.0 m long – 2 No.
e. 150mm dia dismantling joint - 2 No. 1150
171 Kg 115.14 #VALUE! #VALUE!
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

172 Traveling Trolley with chain pulley Block 2 ton 4 mt. lift 1 No. 143925.00 #VALUE! #VALUE!

173 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 28 of 87
174 16 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.90 #VALUE! #VALUE!

175 Fire extinguisher 2 No. 7196.25 #VALUE! #VALUE!

176 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

177 Rubber resistance sheet. 1 No. 3838.00 #VALUE! #VALUE!

178 Servo voltage stabilizer of suitable capacity 2 No. 153520.00 #VALUE! #VALUE!

179 Erection of Pumping plant. 2 Job 57570.00 #VALUE! #VALUE!

180 Commissioning & Testing of pumping plant. 2 Job 47975.00 #VALUE! #VALUE!

181 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 29 of 87
182 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-2A (WELLSLEY GANJ

submersible Pump set


Provision of Submersible pump set of capacity 3750 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 45 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended stool
having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated)
183 2 No. 647662.5 #VALUE! #VALUE!
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)
M.S. fabricated dust & vermin proof of cubical type extensible panel control panel consisting one no. 600
Amps ACB. Incoming and Six nos. 200 Amps. Four Nos. of 63 Amps .MCCBS including Ampere meter, Volt
meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, fuses etc.

184 Automatic soft starter Panel of 45 H.P. suitable for above pumping plant. 2 No. 95950 #VALUE! #VALUE!

185 Main Piping & valves including common header

186 Valves

186.01 250mm dia C.I.D.F. Sluice Valve – 2 No. 2 No. 67165 #VALUE! #VALUE!

186.02 250mm dia C.I.D.F. Reflux Valve – 2 No. 2 No. 71962.5 #VALUE! #VALUE!

186.03 300mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 No. 103626 #VALUE! #VALUE!

Pipe Fitting
a 300x300x250 mm dia C.I.D.F. Tee – 2 No.
b 300mm dia D.F. distance piece 1m long – 2 No.
c 300mm dia D.F. distance piece 1.5m long – 2 No.
187 d 300mm dia D.F. distance piece 3.0 m long – 2 No. 1775 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 2 No.
f Nut-Bolt & Rubber Packing - As required
g. Any other Item required for proper installation of above Pumps - Job

188 Spares for switch gear. 2 Set 23987.5 #VALUE! #VALUE!

189 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.9 #VALUE! #VALUE!

Page 30 of 87
190 Power wiring & earthing material. 1 Set 28785 #VALUE! #VALUE!

191 Rubber resistance sheet. 1 No. 3838 #VALUE! #VALUE!

192 Servo voltage stabilizer of suitable capacity 2 No. 153520 #VALUE! #VALUE!

193 Erection of Pumping plant. 2 Job 57570 #VALUE! #VALUE!

194 Commissioning & Testing of pumping plant. 2 Job 47975 #VALUE! #VALUE!

195 Painting 1 Job 19190 #VALUE! #VALUE!

Page 31 of 87
196 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-2B (WELLSLEY GAN

submersible Pump set


Provision of Submersible pump set of capacity 1250 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 15 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS 2 No.
197 Protable stand - M.S. Fabricated (apoxy coated) 287850.00 #VALUE! #VALUE!
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)

M.S. fabricated dust & vermin proof of cubical type panel control panel consisting one no. 400 Amps.
Incoming and six nos. 200 Amps. Outgoing with 4 Nos. M.C.C.B of 63 Amp. of light & fan & spares including 1
198 Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, No. 239875.00 #VALUE! #VALUE!
fuses etc.

199 Automatic soft starter Panel of 15 H.P. suitable for above pumping plant. 2 No. 67165.00 #VALUE! #VALUE!

200 Main Piping & valves including common header

201 Valves

201.01 150mm dia C.I.D.F. Sluice Valve – 2 No. 2 No. 27825.50 #VALUE! #VALUE!

201.02 150mm dia C.I.D.F. Reflux Valve – 2 No. 2 No. 29744.50 #VALUE! #VALUE!

201.03 200mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 No. 51813.00 #VALUE! #VALUE!

Pipe Fitting
a 200x200x150 mm dia C.I.D.F. Tee – 2 No.
b 200mm dia D.F. distance piece 1m long – 2No.
c 200mm dia D.F. distance piece 1.5m long – 2 No.
202 d 200mm dia D.F. distance piece 3.0 m long – 2 No. 1100 Kg 115.14 #VALUE! #VALUE!
e. 150mm dia dismantling joint - 2 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

203 Traveling Trolley with chain pulley Block 2 ton 4 mt. lift 1 No. 143925.00 #VALUE! #VALUE!

204 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 32 of 87
205 16 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.90 #VALUE! #VALUE!

206 Fire extinguisher 2 No. 7196.25 #VALUE! #VALUE!

207 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

208 Rubber resistance sheet. 1 No. 3838.00 #VALUE! #VALUE!

209 Servo voltage stabilizer of suitable capacity 2 No. 153520.00 #VALUE! #VALUE!

210 Erection of Pumping plant. 2 Job 57570.00 #VALUE! #VALUE!

211 Commissioning & Testing of pumping plant. 2 Job 47975.00 #VALUE! #VALUE!

212 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 33 of 87
213 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-2B (WELLSLEY GAN

submersible Pump set


Provision of Submersible pump set of capacity 2300 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 25 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOCwith following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated) 3
214 Lifting Chain - Alloy steel No. 446167.50 #VALUE! #VALUE!
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(2W + 1S)
M.S. fabricated dust & vermin proof of cubical type extensible panel control panel consisting one no. 400
Amps ACB. Incoming and Six nos. 200 Amps. Four Nos. of 63 Amps .MCCBS including Ampere meter, Volt
meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, fuses etc.

215 Automatic soft starter of 25 H.P. suitable for above pumping plant. 3 No. 47975.00 #VALUE! #VALUE!

216 Main Piping & valves including common header

217 Valves

217.01 200mm dia C.I.D.F. Sluice Valve – 3 No. 3 No. 46056.00 #VALUE! #VALUE!

217.02 200mm dia C.I.D.F. Reflux Valve – 3 No. 3 No. 51813.00 #VALUE! #VALUE!

217.03 250mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 No. 71962.50 #VALUE! #VALUE!

Pipe Fitting
a 250x250x200 mm dia C.I.D.F. Tee – 3 No.
b. 250mm dia D.F. distance piece 1m long – 3 No.
c 250mm dia D.F. distance piece 1.5m long – 3 No.
218 d 250mm dia D.F. distance piece 3.0 m long – 3 No. 2050 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 3 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

219 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

220 16 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.90 #VALUE! #VALUE!

Page 34 of 87
221 Fire extinguisher 2 No. 7196.25 #VALUE! #VALUE!

222 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

223 Rubber resistance sheet. 1 No. 3838.00 #VALUE! #VALUE!

224 Servo voltage stabilizer of suitable capacity 3 No. 153520.00 #VALUE! #VALUE!

225 Erection of Pumping plant. 3 Job 57570.00 #VALUE! #VALUE!

226 Commissioning & Testing of pumping plant. 3 Job 47975.00 #VALUE! #VALUE!

227 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 35 of 87
228 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-3 (MUKERI BAZAAR

submersible Pump set


Provision of Submersible pump set of capacity 3500 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 40 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & for control duly followed with susction strainer & suspended
stool having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS 2
229 Protable stand - M.S. Fabricated (apoxy coated) No. 652460.00 #VALUE! #VALUE!
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)

M.S. fabricated dust & vermin proof of cubical type panel control panel consisting one no. 400 Amps.
Incoming and six nos. 100 Amps. Outgoing with 2 Nos. M.C.C.B of 63 Amp. of light & fan & spares including 1
230 Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, No. 364610.00 #VALUE! #VALUE!
fuses etc.

231 Automatic soft starter Panel of 40 H.P. suitable for above pumping plant. 2 No. 81557.50 #VALUE! #VALUE!

232 Main Piping & valves including common header

233 Valves

233.01 250mm dia C.I.D.F. Sluice Valve – 2 No. 2 No. 67165.00 #VALUE! #VALUE!

233.02 250mm dia C.I.D.F. Reflux Valve – 2 No. 2 No. 71962.50 #VALUE! #VALUE!

233.03 300mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 No. 103626.00 #VALUE! #VALUE!

Pipe Fitting
a 300x300x250 mm dia C.I.D.F. Tee – 2 No.
b 300mm dia D.F. distance piece 1m long – 2 No.
c 300mm dia D.F. distance piece 1.5m long – 2 No.
234 d 300mm dia D.F. distance piece 3.0 m long – 2 No. 1775 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 2 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

235 Traveling Trolley with chain pulley Block 2 ton 4 mt. lift 1 Set 143925.00 #VALUE! #VALUE!

236 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 36 of 87
237 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 671.65 #VALUE! #VALUE!

238 Fire extinguisher 2 Set 7196.25 #VALUE! #VALUE!

239 Power wiring & earthing material. 1 No. 28785.00 #VALUE! #VALUE!

240 Rubber resistance sheet. 1 No. 3838.00 #VALUE! #VALUE!

241 Servo voltage stabilizer of suitable capacity 2 Job 153520.00 #VALUE! #VALUE!

242 Erection of Pumping plant. 2 Job 57570.00 #VALUE! #VALUE!

243 Commissioning & Testing of pumping plant. 2 Job 47975.00 #VALUE! #VALUE!

244 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 37 of 87
245 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-3 (MUKERI BAZAAR

submersible Pump set


Provision of Submersible pump set of capacity 2700 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 30 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOCwith following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated) 3
246 Lifting Chain - Alloy steel No. 839562.50 #VALUE! #VALUE!
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(2W + 1S)
M.S. fabricated dust & vermin proof of cubical type extensible panel control panel consisting one no. 400
Amps ACB. Incoming and Six nos. 200 Amps. Four Nos. of 63 Amps .MCCBS including Ampere meter, Volt
meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, fuses etc.

247 Automatic soft starter Panel of 30 H.P. suitable for above pumping plant. 3 No. 81557.50 #VALUE! #VALUE!

248 Main Piping & valves including common header

249 Valves

249.01 200mm dia C.I.D.F. Sluice Valve – 3 No. 3 No. 46056.00 #VALUE! #VALUE!

249.02 200mm dia C.I.D.F. Reflux Valve – 3 No. 3 No. 51813.00 #VALUE! #VALUE!

249.03 250mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 No. 71962.50 #VALUE! #VALUE!

Pipe Fitting
a 250x250x200 mm dia C.I.D.F. Tee – 3 No.
b. 250mm dia D.F. distance piece 1m long – 3 No.
c 250mm dia D.F. distance piece 1.5m long – 3 No.
250 d 250mm dia D.F. distance piece 3.0 m long – 3 No. 1950 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 3 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

251 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

252 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 671.65 #VALUE! #VALUE!

Page 38 of 87
253 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

254 Rubber resistance sheet. 1 No. 3838.00 #VALUE! #VALUE!

255 Servo voltage stabilizer of suitable capacity 3 No. 153520.00 #VALUE! #VALUE!

256 Erection of Pumping plant. 3 Job 57570.00 #VALUE! #VALUE!

257 Commissioning & Testing of pumping plant. 3 Job 47975.00 #VALUE! #VALUE!

258 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 39 of 87
259 CLEAR WATER PUMPING PLANT FOR WATER DEMAND OF ZONE-4 (CHET GANJ ZONE

submersible Pump set


Provision of Submersible pump set of capacity 1200 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 15 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
260 Protable stand - M.S. Fabricated (apoxy coated) 2 Nos 287850.00 #VALUE! #VALUE!
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)

M.S. fabricated dust & vermin proof of cubical type panel control panel consisting one no. 400 Amps.
Incoming and six nos. 100 Amps. Outgoing with 2 Nos. M.C.C.B of 63 Amp. of light & fan & spares including 1
261 Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, Nos 239875.00 #VALUE! #VALUE!
fuses etc.

262 Auto soft starter panel of 15 H.P. for above pumping plants 2 Nos 67165.00 #VALUE! #VALUE!

263 Main Piping & valves including common header

264 Valves

264.01 150mm dia C.I.D.F. Sluice Valve – 2 No. 2 Nos 27825.50 #VALUE! #VALUE!

264.02 150mm dia C.I.D.F. Reflux Valve – 2 No. 2 Nos 29744.50 #VALUE! #VALUE!

264.03 200mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 51813.00 #VALUE! #VALUE!

Pipe Fitting
a 200x200x150 mm dia C.I.D.F. Tee – 2 No.
b 200mm dia D.F. distance piece 1m long – 2No.
c 200mm dia D.F. distance piece 1.5m long – 2 No.
265 d 200mm dia D.F. distance piece 3.0 m long – 2 No. 1150 Kg 115.14 #VALUE! #VALUE!
e. 150mm dia dismantling joint - 2 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

266 Traveling Trolley with chain pulley Block 2 ton 4 mt. lift 1 Nos 143925.00 #VALUE! #VALUE!

267 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 40 of 87
268 16 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 191.90 #VALUE! #VALUE!

269 Fire extinguisher 2 Nos 7196.25 #VALUE! #VALUE!

270 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

271 Rubber resistance sheet. 1 Nos 3838.00 #VALUE! #VALUE!

272 Servo voltage stabilizer of suitable capacity 2 Nos 153520.00 #VALUE! #VALUE!

273 Erection of Pumping plant. 2 Job 57570.00 #VALUE! #VALUE!

274 Commissioning & Testing of pumping plant. 2 Job 47975.00 #VALUE! #VALUE!

275 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 41 of 87
276 CLEAR WATER PUMPING PLANT FOR ZONE-4 AT 1900 KL OHT (Chet Ganj Zone)

submersible Pump set


Provision of Submersible pump set of capacity 3575 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 40 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated)
277 Lifting Chain - Alloy steel 3 Nos 652460.00 #VALUE! #VALUE!
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(2W + 1S)
M.S. fabricated dust & vermin proof of cubical type extensible panel control panel consisting one no. 400
Amps ACB. Incoming and Six nos. 200 Amps. Four Nos. of 63 Amps .MCCBS including Ampere meter, Volt
meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, fuses etc.

278 Auto soft starter of 40 H.P. for above pumping plants. 3 Nos 95950.00 #VALUE! #VALUE!

279 Main Piping & valves including common header

280 Valves

280.01 250mm dia C.I.D.F. Sluice Valve – 3 No. 3 Nos 67165.00 #VALUE! #VALUE!

280.02 250mm dia C.I.D.F. Reflux Valve – 3 No. 3 Nos 71962.50 #VALUE! #VALUE!

280.03 300mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 103626.00 #VALUE! #VALUE!

Pipe Fitting
a 300x300x250 mm dia C.I.D.F. Tee – 3 No.
b 300mm dia D.F. distance piece 1m long – 3 No.
c 300mm dia D.F. distance piece 1.5m long – 3 No.
281 d 300mm dia D.F. distance piece 3.0 m long – 3 No. 2575 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 3 No.
f Nut-Bolt & Rubber Packing - As required
g. Any other Item required for proper installation of above Pumps - Job

282 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

283 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 671.65 #VALUE! #VALUE!

Page 42 of 87
284 Fire extinguisher 2 Nos 7196.25 #VALUE! #VALUE!

285 Rubber resistance sheet. 1 Nos 3838.00 #VALUE! #VALUE!

286 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

287 Servo voltage stabilizer of suitable capacity 3 Nos 153520.00 #VALUE! #VALUE!

288 Erection of Pumping plant. 3 Job 57570.00 #VALUE! #VALUE!

289 Commissioning & Testing of pumping plant. 3 Job 47975.00 #VALUE! #VALUE!

290 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 43 of 87
291 CLEAR WATER PUMPING PLANT FOR ZONE-5A at 1800 KL OHT (Indristal Zone)

submersible Pump set


Provision of Submersible pump set of capacity 4800 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 60 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOCwith following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
292 Protable stand - M.S. Fabricated (apoxy coated) 2 Nos 791587.50 #VALUE! #VALUE!
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)

M.S. fabricated dust & vermin proof of cubical type panel control panel consisting one no. 400 Amps.
Incoming and Three nos. 100 Amps. Outgoing with 2 Nos. M.C.C.B of 63 Amp. of light & fan & spares including
293 1 Nos 364610.00 #VALUE! #VALUE!
Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch,
fuses etc.

294 Automatic soft starter Panel of 60 H.P. suitable for above pumping plant. 2 Nos 95950.00 #VALUE! #VALUE!

295 Main Piping & valves including common header

296 Valves

296.01 250mm dia C.I.D.F. Sluice Valve – 2 No. 2 Nos 67165.00 #VALUE! #VALUE!

296.02 250mm dia C.I.D.F. Reflux Valve – 2 No. 2 Nos 71962.50 #VALUE! #VALUE!

296.03 300mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 103626.00 #VALUE! #VALUE!

Pipe Fitting
a 300x300x250 mm dia C.I.D.F. Tee – 2 No.
b 300mm dia D.F. distance piece 1m long – 2 No.
c 300mm dia D.F. distance piece 1.5m long – 2 No.
297 d 300mm dia D.F. distance piece 3.0 m long – 2 No. 1775 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 2 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

298 Traveling Trolley with chain pulley Block 2 ton 4 mt. lift 1 Nos 143925.00 #VALUE! #VALUE!

299 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 44 of 87
300 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 671.65 #VALUE! #VALUE!

301 Fire extinguisher 2 Nos 7196.25 #VALUE! #VALUE!

302 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

303 Rubber resistance sheet. 1 Nos 3838.00 #VALUE! #VALUE!

304 Servo voltage stabilizer of suitable capacity 2 Nos 153520.00 #VALUE! #VALUE!

305 Erection of Pumping plant. 2 Job 57570.00 #VALUE! #VALUE!

306 Commissioning & Testing of pumping plant. 2 Job 47975.00 #VALUE! #VALUE!

307 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 45 of 87
308 CLEAR WATER PUMPING PLANT FOR ZONE- 5B at 500 KL OHT (Industrial Zone)

submersible Pump set


Provision of Submersible pump set of capacity 2050 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 25 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
309 Protable stand - M.S. Fabricated (apoxy coated) 2 Nos 383800.00 #VALUE! #VALUE!
Lifting Chain - Alloy steel
Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(1W + 1S)

M.S. fabricated dust & vermin proof of cubical type panel control panel consisting one no. 400 Amps.
Incoming and Three nos. 100 Amps. Outgoing with 2 Nos. M.C.C.B of 63 Amp. of light & fan & spares including
310 Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch, 1 Nos 335825.00 #VALUE! #VALUE!
fuses etc.

311 Auto soft starter panel of 25 H.P. for above pumping plants. 2 Nos 81557.50 #VALUE! #VALUE!

312 Main Piping & valves including common header

313 Valves

313.01 200mm dia C.I.D.F. Sluice Valve – 2No. 2 Nos 46056.00 #VALUE! #VALUE!

313.02 200mm dia C.I.D.F. Reflux Valve – 2 No. 2 Nos 51813.00 #VALUE! #VALUE!

313.03 250mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 71962.50 #VALUE! #VALUE!

Pipe Fitting
a 250x250x200 mm dia C.I.D.F. Tee – 2 No.
b 250mm dia D.F. distance piece 1m long – 2 No.
c 250mm dia D.F. distance piece 1.5m long – 2 No. 1525 Kg
314 d 250mm dia D.F. distance piece 3.0 m long – 2 No. 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 2 No.
f Nut-Bolt & Rubber Packing - As required

315 Traveling Trolley with chain pulley Block 2 ton 4 mt. lift 1 Nos 143925.00 #VALUE! #VALUE!

316 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 46 of 87
317 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 671.65 #VALUE! #VALUE!

318 Fire extinguisher 2 No. 7196.25 #VALUE! #VALUE!

319 Power wiring & earthing material. 1 set 28785.00 #VALUE! #VALUE!

320 Rubber resistance sheet. 1 No. 3838.00 #VALUE! #VALUE!

321 Servo voltage stabilizer of suitable capacity 2 No. 153520.00 #VALUE! #VALUE!

322 Erection of Pumping plant. 2 Job 57570.00 #VALUE! #VALUE!

323 Commissioning & Testing of pumping plant. 2 Job 47975.00 #VALUE! #VALUE!

324 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 47 of 87
325 CLEAR WATER PUMP FOR WATER DEMAND OF ZONE-6 (VINDHYACHAL ZONE)
submersible Pump set
Provision of Submersible pump set of capacity 2050 lpm, 35 m head with fully submerged squirel cage
induction motor (TEWC) of 4 pole, 25 HP 3 phase 415 (+6% - 10%) volt, enclosure I.P. 68, insulation F class
with suitable submersible cable as for power & control duly followed with susction strainer & suspended
stool having MOC with following specifications,
Pump Casing- cast steel
Casing Wearing rings - Bronze
Fasteners in cont. with liquid - SS
Protable stand - M.S. Fabricated (apoxy coated)
Lifting Chain - Alloy steel
326 Impeller and Wearing Ring - SS (CF 8 AM ) and Bronze 3 Nos 791587.50 #VALUE! #VALUE!
Rotor shaft - AISI 410
Mech seal - Upper side carban v/s cast Cr Mo steel , Lower pump SIC v/s SIC
Suction Strainer- SS 202
(2W + 1S)

M.S. fabricated dust & vermin proof of cubical type panel control panel consisting one no. 400 Amps.
Incoming and Three nos. 100 Amps. Outgoing with 2 Nos. M.C.C.B of 63 Amp. of light & fan & spares including
327 1 Nos 335825.00 #VALUE! #VALUE!
Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, selector switch,
fuses etc.

328 Auto soft starter panel of 25 H.P. for above pumping plants. 2 Nos 81557.50 #VALUE! #VALUE!

329 Main Piping & valves including common header

330 Valves

330.01 200mm dia C.I.D.F. Sluice Valve – 2 No. 2 Nos 67165.00 #VALUE! #VALUE!

330.02 200mm dia C.I.D.F. Reflux Valve – 2 No. 2 Nos 71962.50 #VALUE! #VALUE!

330.03 250mm dia C.I.D.F. Reflex Valve (for common header) – 1 No. 1 Nos 172710.00 #VALUE! #VALUE!

Pipe Fitting
a 250x250x200 mm dia C.I.D.F. Tee – 2 No.
b 250mm dia D.F. distance piece 1m long – 2 No.
c 250mm dia D.F. distance piece 1.5m long – 2 No.
331 d 250mm dia D.F. distance piece 3.0 m long – 2 No. 2250 Kg 115.14 #VALUE! #VALUE!
e. 250mm dia dismantling joint - 2 No.
f Nut-Bolt & Rubber Packing - As required
g Any other Item required for proper installation of above Pumps - Job

332 Traveling Trolley with chain pulley Block 2 ton 4 mt. lift 1 Nos 143925.00 #VALUE! #VALUE!

333 Spares for switch gear. 2 Set 23987.50 #VALUE! #VALUE!

Page 48 of 87
334 35 Sq.mm 3⅓ core armoured Aluminum cable. 200 m 671.65 #VALUE! #VALUE!

335 Fire extinguisher 2 Nos 7196.25 #VALUE! #VALUE!

336 Power wiring & earthing material. 1 Set 28785.00 #VALUE! #VALUE!

337 Rubber resistance sheet. 1 Nos 3838.00 #VALUE! #VALUE!

338 Servo voltage stabilizer of suitable capacity 3 Nos 153520.00 #VALUE! #VALUE!

339 Erection of Pumping plant. 3 Job 57570.00 #VALUE! #VALUE!

340 Commissioning & Testing of pumping plant. 3 Job 47975.00 #VALUE! #VALUE!

341 Painting 1 Job 19190.00 #VALUE! #VALUE!

Page 49 of 87
342 AUTOMATION OF CWR AT WATER TREATMENT PLANT, MIRZAPUR
GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
343 from registered mobile parallel mode. 5 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
344 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 5 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


345 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


346

350 mm
346.01 4 Nos 215887.50 #VALUE! #VALUE!

250 mm
346.02 3 Nos 201495.00 #VALUE! #VALUE!

200 mm
346.03 3 Nos 193819.00 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


347

450 mm
347.01 1 No. 383800.00 #VALUE! #VALUE!

350 mm
347.02 1 No. 527725.00 #VALUE! #VALUE!

250 mm
347.03 1 No. 259065.00 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
348 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


349 1 No 115140.00 #VALUE! #VALUE!

Pressure Transmeter
350 10 Nos 11514.00 #VALUE! #VALUE!

Complete cabling for 10 pumps.


351 5 Sets 191900.00 #VALUE! #VALUE!

Security Survelliance IP Camera


352 2 Nos 19190.00 #VALUE! #VALUE!

353 AUTOMATION OF PUMPING STATION AT RAW WATER INTEK WELL, MIRZAPUR


GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
354 from registered mobile parallel mode. 2 Nos 287850 #VALUE! #VALUE!

Page 50 of 87
GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
355 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 2 Nos 28785 #VALUE! #VALUE!

Intelligent energy meters.


356 1 No. 23987.5 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


357

450 mm
357.01 4 Nos 235077.5 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


358

600 mm
358.01 1 No. 771438 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
359 rating 630 Amp 1 No. 215887.5 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


360 1 No 115140 #VALUE! #VALUE!

Pressure Transmeter
361 4 Nos 11514 #VALUE! #VALUE!

Complete cabling for 4 pumps.


362 2 Sets 191900 #VALUE! #VALUE!

Security Survelliance IP Camera


363 2 Nos 19190 #VALUE! #VALUE!

Page 51 of 87
364 AUTOMATION OF ZONAL PUMPING STATION AT ZONE-1, MIRZAPUR
GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
365 from registered mobile parallel mode. 4 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
366 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 4 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


367 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


368

For individual pump


369

250 mm
369.01 3 Nos 268660.00 #VALUE! #VALUE!

200 mm
369.02 2 Nos 239875.00 #VALUE! #VALUE!

150 mm
369.03 2 Nos 211090.00 #VALUE! #VALUE!

For distribution main


370

600 mm
370.01 1 No 244672.50 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


371

For comman header of pumps


372

300 mm
372.01 1 No. 335825.00 #VALUE! #VALUE!

250 mm
372.02 1 No. 259065.00 #VALUE! #VALUE!

200 mm
372.03 1 No. 172710.00 #VALUE! #VALUE!

For distribution main


373

600 mm
373.01 1 No. 771438.00 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
374 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


375 1 No 115140.00 #VALUE! #VALUE!

Page 52 of 87
Pressure Transmeter
376 7 Nos 11514.00 #VALUE! #VALUE!

Complete cabling for 7 pumps.


377 4 Sets 191900.00 #VALUE! #VALUE!

Security Survelliance IP Camera


378 2 Nos 19190.00 #VALUE! #VALUE!

379 AUTOMATION OF ZONAL PUMPING STATION AT ZONE-2A, MIRZAPUR


GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
380 from registered mobile parallel mode. 2 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
381 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 2 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


382 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


383

For individual pump


384

250 mm
384.01 2 Nos 201495.00 #VALUE! #VALUE!

150 mm
384.02 2 Nos 182305.00 #VALUE! #VALUE!

For distribution main


385

450 mm
385.01 1 No. 235077.50 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


386

For comman header of pumps


387

300 mm
387.01 1 No. 335825.00 #VALUE! #VALUE!

200 mm
387.02 1 No. 172710.00 #VALUE! #VALUE!

For distribution main


388

450 mm
388.01 1 No. 526765.50 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
389 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Page 53 of 87
Ultrasonic Level sensor with RTUs communication.
390 1 No 115140.00 #VALUE! #VALUE!

Pressure Transmeter
391 4 Nos 11514.00 #VALUE! #VALUE!

Complete cabling for 4 pumps.


392 3 Sets 191900.00 #VALUE! #VALUE!

Security Survelliance IP Camera


393 2 Nos 19190.00 #VALUE! #VALUE!

394 AUTOMATION OF ZONAL PUMPING STATION AT ZONE-2B, MIRZAPUR


GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
395 from registered mobile parallel mode. 3 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
396 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 3 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


397 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


398

For individual pump


399

200 mm
399.01 3 Nos 193819.00 #VALUE! #VALUE!

150 mm
399.02 2 Nos 182305.00 #VALUE! #VALUE!

For distribution main


400

400 mm
400.01 1 No 225482.50 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


401

For comman header of pumps


402

250 mm
402.01 1 No. 259065.00 #VALUE! #VALUE!

200 mm
402.02 1 No. 172710.00 #VALUE! #VALUE!

For distribution main


403

400 mm
403.01 1 No. 430815.50 #VALUE! #VALUE!

Page 54 of 87
Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
404 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


405 1 No 115140.00 #VALUE! #VALUE!

Pressure Transmeter
406 5 Nos 11514.00 #VALUE! #VALUE!

Complete cabling for 5 pumps.


407 3 Sets 191900.00 #VALUE! #VALUE!

Security Survelliance IP Camera


408 2 Nos 19190.00 #VALUE! #VALUE!

Page 55 of 87
409 AUTOMATION OF ZONAL PUMPING STATION AT ZONE-3, MIRZAPUR
GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
410 from registered mobile parallel mode. 3 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
411 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 3 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


412 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


413

For individual pump


414

250 mm
414.01 2 Nos 201495.00 #VALUE! #VALUE!

200 mm
414.02 3 Nos 193819.00 #VALUE! #VALUE!

For distribution main


415

600 mm
415.01 1 No 244672.50 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


416

For comman header of pumps


417

300 mm
417.01 1 No. 335825.00 #VALUE! #VALUE!

250 mm
417.02 1 No. 259065.00 #VALUE! #VALUE!

For distribution main


418

600 mm
418.01 1 No. 771438.00 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
419 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


420 1 No 115140.00 #VALUE! #VALUE!

Pressure Transmeter
421 5 Nos 11514.00 #VALUE! #VALUE!

Complete cabling for 5 pumps.


422 3 Sets 191900.00 #VALUE! #VALUE!

Page 56 of 87
Security Survelliance IP Camera
423 2 Nos 19190.00 #VALUE! #VALUE!

424 AUTOMATION OF ZONAL PUMPING STATION AT ZONE-4, MIRZAPUR


GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
425 from registered mobile parallel mode. 3 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
426 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 3 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


427 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


428

For individual pump


429

250 mm
429.01 2 Nos 201495.00 #VALUE! #VALUE!

150 mm
429.02 3 Nos 182305.00 #VALUE! #VALUE!

For distribution main


430

600 mm
430.01 1 No 244672.50 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


431

For comman header of pumps


432

300 mm
432.01 1 No. 335825.00 #VALUE! #VALUE!

250 mm
432.02 1 No. 259065.00 #VALUE! #VALUE!

200 mm
432.03 2 No. 172710.00 #VALUE! #VALUE!

For distribution main


433

600 mm
433.01 1 No. 771438.00 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
434 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


435 1 No 115140.00 #VALUE! #VALUE!

Page 57 of 87
Pressure Transmeter
436 5 Nos 11514.00 #VALUE! #VALUE!

Complete cabling for 5 pumps.


437 3 Sets 191900.00 #VALUE! #VALUE!

Security Survelliance IP Camera


438 2 Nos 19190.00 #VALUE! #VALUE!

439
AUTOMATION OF ZONAL PUMPING STATION AT ZONE-5A, MIRZAPUR
GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
440 from registered mobile parallel mode. 1 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
441 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 1 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


442 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


443

For individual pump


444

250 mm
444.01 2 Nos 201495.00 #VALUE! #VALUE!

For distribution main


445

400 mm
445.01 1 No 225482.50 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


446

For comman header of pumps


447

300 mm
447.01 1 No. 335825.00 #VALUE! #VALUE!

For distribution main


448

400 mm
448.01 1 No. 470155.00 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
449 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


450 1 No 115140.00 #VALUE! #VALUE!

Pressure Transmeter
451 2 Nos 11514.00 #VALUE! #VALUE!

Page 58 of 87
Complete cabling for 2 pumps.
452 1 Sets 191900.00 #VALUE! #VALUE!

Security Survelliance IP Camera


453 2 Nos 19190.00 #VALUE! #VALUE!

454
AUTOMATION OF ZONAL PUMPING STATION AT ZONE-5B, MIRZAPUR
GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
455 from registered mobile parallel mode. 1 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
456 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 1 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


457 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


458

For individual pump


459

250 mm
459.01 2 Nos 201495.00 #VALUE! #VALUE!

For distribution main


460

600 mm
460.01 1 No 244672.50 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


461

For comman header of pumps


462

300 mm
462.01 1 No. 335825.00 #VALUE! #VALUE!

For distribution main


463

600 mm
463.01 1 No. 771438.00 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
464 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


465 1 No 115140.00 #VALUE! #VALUE!

Pressure Transmeter
466 2 Nos 11514.00 #VALUE! #VALUE!

Complete cabling for 2 pumps.


467 1 Sets 191900.00 #VALUE! #VALUE!

Page 59 of 87
Security Survelliance IP Camera
468 2 Nos 19190.00 #VALUE! #VALUE!

469
AUTOMATION OF ZONAL PUMPING STATION AT ZONE-6, MIRZAPUR
GSM/GPRS Based Remote Terminal Units with analog and Digital Parameter and features as specified to store
and tranmit data on GSM backbone to MCS (1 no IRTU for 2 Pumps and should able to send & received SMS
470 from registered mobile parallel mode. 2 Nos 287850.00 #VALUE! #VALUE!

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to
471 MCS with all accessories and should able to send & received SMS from registered mobile parallel mode. 2 Nos 28785.00 #VALUE! #VALUE!

Intelligent energy meters.


472 1 No. 23987.50 #VALUE! #VALUE!

Motor operated Actuator for Sluice Valve of size.


473

For individual pump


474

250 mm
474.01 3 Nos 201495.00 #VALUE! #VALUE!

For distribution main


475

450 mm
475.01 1 No 235077.50 #VALUE! #VALUE!

Electro magnetic flow meter of size following.


476

For comman header of pumps


477

350 mm
477.01 1 No. 383800.00 #VALUE! #VALUE!

For distribution main


478

450 mm
478.01 1 No. 526765.50 #VALUE! #VALUE!

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IES : 60947 -1 & IEC : 60947-6-1) of
479 rating 630 Amp 1 No. 215887.50 #VALUE! #VALUE!

Ultrasonic Level sensor with RTUs communication.


480 1 No 115140.00 #VALUE! #VALUE!

Pressure Transmeter
481 3 Nos 11514.00 #VALUE! #VALUE!

Complete cabling for 3 pumps.


482 2 Sets 191900.00 #VALUE! #VALUE!

Security Survelliance IP Camera


483 2 Nos 19190.00 #VALUE! #VALUE!

Page 60 of 87
484 ESTIMATE FOR MASTER CONTROL STATION
HP Compaq or Equivalent master control station hardware with latest configuration and minimum PIV
485 Processor, 160 GB HDD, 1024 MB RAM 52 CDR/DVD, 50" Plasma screen, mouse & keyboard. Make 1 No 287850.00 #VALUE! #VALUE!
HP/HCL/Acer/ Equivalent.
Full development version of SCADA software with unlimited digital and analog input / output features
486 specified in detailed tehnical document adequate with costomization of software as per requirement. 1 No 652460.00 #VALUE! #VALUE!

Front end processor at MCS as specified.


487 1 No 652460.00 #VALUE! #VALUE!

GSM based wireless communicaiton system for iRTU capable to transfer and gather data from remote sites to
488 control stations. All accessories included with signal enhancer, antenna spec. Already. 1 No 38380.00 #VALUE! #VALUE!

APC or equivalent 0.5 K.V.A rating UPS


489 1 No 19190.00 #VALUE! #VALUE!

HP or equivalent 600 DPI ink jet color printer.


490 1 No 28785.00 #VALUE! #VALUE!

HP or equivalent Laser printer 1018 or equivalent


491 1 No 28785.00 #VALUE! #VALUE!

Installation, commisssioning and testing


492 1 No 19190.00 #VALUE! #VALUE!

493 Estimate of Power Sub-Station icluding internal electrification for RAW water pum

1 HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control panel comprising of
following items.
1.1 Incoming panel
33 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA capacity in draw out
version vaccum circuit breaker fitted with-
(i) 3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I accuracy and 5p 10 for
protection core with burden of 15 VA per core.
(ii) 1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
(iii) 1 set of closing & tripping coil suitable for 30 Volt DC.
(iv) Mechanical indicator for ON/OFF.
(v) Emergency Mechanical tripping through push lever.
(vi) Rear/Side entry cable box to accommodate suitable size cable.
494 (vii) Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor. 1 Set 3454200 #VALUE! #VALUE!
(viii) Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
(ix) Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc.
(x) Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It shall be provided with
cover for ventilation and shall have steel hinged doors equiped with battery & battery charger.

1.2 Outgoing panel


H.T. out going panels for feeding two transformers similar to incoming panel but without following accessories.
(i) Volt meter with selector switch
(ii) KWH meter with M.D.I.
(iii) Potential transformers
(iv) Outgoing battery charger

Page 61 of 87
Provision for oil filled natural air cooled step down transformer suitable for out door installation of 1250 KVA, 33/0. 4
KV and as per I:S 2026/1977 with all accessories. The transformer should be provided with off load tap changer of ±
7.5% voltage varialtion on L.T. side. These tapping should be connected by and externally separated tap changing switch.
The temp side in oil by thermometer should not exceed 50oC and of winding by measuring resistance should not
exceed 55oC over an ambient of 45oC maximum. The transformer should have cable box on HTside for termination of
cables, however LT side should have provision for Busduct connection.
495 2 No. 2878500.00 #VALUE! #VALUE!

Automatic Power Factor Control Panel


496

Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 1054 KVA to improve the
496.01 power factor from 0.80 lagging to 0.97. 1 No 815575 #VALUE! #VALUE!

4 Main L.T. Panel


2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
4.1 Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 2500 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz
indoor installation type and comprising of 2 Nos. 2000 Amp. draw out type ACB housed in sheet steel
cubical panel fitted with following.
(i) One set of Mechanical On/Off Indicator
(ii) One no. shunt trip oil
(iii) One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-
200% for over current and 20-80% for earth fault or equivalent.
497 2 No. 431775 #VALUE! #VALUE!
(iv) Two CTs of suitable ratio and class for protection and indication.
(v) One no. neutral link
(vi) One no. 96 Sq.mm. voltmeter (0-600V) selector switch
(vii) One no. three way and off voltmeter selector switch
(viii) One no. 96 Sq.mm. Ammeter of and suitable range
(ix) One no. three way and off Ammeter selector switch
(x) One set of red green indicating lamp
(xi) Cable connection arrangments
(xii) Inter locking arrangements 

Page 62 of 87
4.2 OUT GOING PANEL
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 2500 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 2 Nos.ACB having the capacity of 1000 Amp and 800 Amp draw out type
ACB housed in sheet steel cubical panel fitted with following.
(i) One set of Mechanical On/Off Indicator
(ii) One no. shunt trip oil
(iii) One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200%
for over current and 20-80% for earth fault or equivalent.
(iv) Two CTs of suitable ratio and class for protection and indication.
(v) One no. neutral link
(vi) One no. 96 Sq.mm. voltmeter (0-600V) selector switch
(vii) One no. three way and off voltmeter selector switch 2 No. 335825
497.01 #VALUE! #VALUE!
(viii) One no. 96 Sq.mm. Ammeter of and suitable range
(ix) One no. three way and off Ammeter selector switch
(x) One set of red green indicating lamp
(xi) Cable connection arrangments
(xii) Inter locking arrangements

Power Wiring and Earthing


Supply and laying of 3 core, 50 sqm 33 KV XPLE cable (For PPCL meter to Incoming HT panel and from out
497.02 150 M 1439.25 #VALUE! #VALUE!
going panel to Tranformer)

Priovision for supply & Installation of Busduct of Aluminium conductor suitable for 2000 Amp to be laid from LT side of
497.03 trans ferever to incoming main LT panel. (2X50=100 M) 100 M 9595.00 #VALUE! #VALUE!

Supply of Jointing Kit


498

i) HT Indoor Kit For 1 incoming +2 outgoing.


498.01 4 Nos 9595 #VALUE! #VALUE!

ii) HT outdoor kit for transformer


498.02 2 Nos 14392.5 #VALUE! #VALUE!

499 Supply of earthing materials and earthing arrangement for substation. 1 Set 95950 #VALUE! #VALUE!

Erection, testing and commissioning of Sub-Station including testing at work also.


500 1 Job 479750 #VALUE! #VALUE!

501 Approval of electrical inspector, electric safety. 1 Job 23987.5 #VALUE! #VALUE!

502 Painting 1 Job 19190 #VALUE! #VALUE!

503 Foundation for Transformers 2 Job 47975 #VALUE! #VALUE!

504 Fencing work 1 Job 95950 #VALUE! #VALUE!

Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule.
505 1 No. 9595 #VALUE! #VALUE!

Page 63 of 87
Provision for supply and fixing of factory wired LED in single piece suitable for 125 watt on GI Pipe Bracket complete in
506 all respect and with internal control gear. 1 No. 33582.5 #VALUE! #VALUE!

Internal Electrification with concealed conduct wiring including all materials and labour complete in all respect of HT
507 &LT Panel room. 1 Job 95950 #VALUE! #VALUE!

508 Power Sub-Station including Internal Electrification of Clear Water Pumping Stati
HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming panel
11 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA
capacity in draw out version vaccum circuit breaker fitted with-
(i) 3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I
accuracy and 5p 10 for protection core with burden of 15 VA per core.
(ii) 1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
(iii) 1 set of closing & tripping coil suitable for 30 Volt DC.
(iv) Mechanical indicator for ON/OFF.
(v) Emergency Mechanical tripping through push lever.
(vi) Rear/Side entry cable box to accommodate suitable size cable.
(vii) Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor.
(viii) Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
509 (ix) Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc. 1 Set 479750.00 #VALUE! #VALUE!
(x) Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It
shall be provided with cover for ventilation and shall have steel hinged doors equiped with battery & battery
charger

Outgoing panel
H.T. out going panels for feeding two transformers similar to incoming panel but without following
accessories.
(i) Volt meter with selector switch
510 (ii) KWH meter with M.D.I. 2 Set 316635.00 #VALUE! #VALUE!
(iii) Potential transformers
(iv) Outgoing battery charger

Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 200
KVA, 11/0, 4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off
load tap changer ± 7.5% voltage varialtion on L.T. side. These tapping should be connected by and externally
separated tap changing switch. The temp side in oil by thermometer should not exceed 50oC and of winding
by measuring resistance should not exceed 55oC over an ambient of 45oC maximum. The transformer should
have cable box on HT/LT side for termination of cables.
511 2 No. 647662.50 #VALUE! #VALUE!

Page 64 of 87
Main L.T. Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 400 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 800 Amp. T.P. M.C.C.B. housed in sheet steel cubical panel fitted with
following.
(i) One set of Mechanical On/Off Indicator
(ii) One no. shunt trip oil
(iii) One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200%
for over current and 20-80% for earth fault or equivalent.
(iv) Two CTs of suitable ratio and class for protection and indication.
(v) One no. neutral link
512 (vi) One no. 96 Sq.mm. voltmeter (0-600) selector switch 2 No. 239875.00 #VALUE! #VALUE!
(vii) One no. three way and off voltmeter selector switch
(viii) One no. 96 Sq.mm. Ammeter of and suitable range
(ix) One no. three way and off Ammeter selector switch
(x) One set of red green indicating lamp
(xi) Cable connection arrangments
(xii) Inter locking arrangements

Load Distribution Panel


Floor mounting extensible type with common aluminium bus bar arrangement comprising of M.C.C.B./M.C.B.
suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector
switch, fuses etc. 1 No.
513 100 Amp. x 5 nos. 86355.00 #VALUE! #VALUE!
63 Amp. x 4 nos.

Automatic Power Factor Control Panel


Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 155 KVA to
514 improve the power factor from 0.80 lagging to 0.97. 1 No 191900.00 #VALUE! #VALUE!

515
Power Wiring and Earthing
Supply and laying of cable
516

Supply of 11 KV XLPE cable for suitable size 3 x 50mm sq.


516.01 100 M 1439.25 #VALUE! #VALUE!

Supply of 3.50 core 240 Sq.mm aluminium PVC cable 1100 V grade.
516.02 200 M 1439.25 #VALUE! #VALUE!

Supply of Jointing cable


517

i) HT Indoor joint
517.01 5 Nos 9595.00 #VALUE! #VALUE!

ii) HT outdoor joint


517.02 1 Nos 14392.50 #VALUE! #VALUE!

Page 65 of 87
iii) 3.50 Corex 240 Sqmm LT Joint indoor type.
517.03 60 Nos 1151.40 #VALUE! #VALUE!

518 Supply of earthing materials and earthing arrangement. 1 Set 47975.00 #VALUE! #VALUE!

Erection, testing and commissioning of Sub-Station including testing at work also.


519 1 Job 95950.00 #VALUE! #VALUE!

520 Approval of electrical inspector, electric safety. 1 Job 23987.50 #VALUE! #VALUE!

521 Painting 1 Job 9595.00 #VALUE! #VALUE!

522 Foundation of Transformers 1 Job 47975.00 #VALUE! #VALUE!

523 Fencing work 1 Job 95950.00 #VALUE! #VALUE!

Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule.
524 1 No. 9595.00 #VALUE! #VALUE!

Provision for supply and fixing of factory wired sodium vapour street lighting luminates single piece cost aluminium
525 body suitable for 250 watts SV on GI Pipe Bracket complete in all respect and with internal control gear. 1 No. 14392.50 #VALUE! #VALUE!

Internal Electrification with concealed conduct wiring including all materials and labour complete in all respect of sump.
526 Pump controlling room and staff Quarter. 1 Set 23987.50 #VALUE! #VALUE!

527 Power Sub-Station including Internal Electrification of Clear Water Pumping Stat

1 HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
1.1 Incoming panel
11 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA
capacity in draw out version vaccum circuit breaker fitted with-
(i) 3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I
accuracy and 5p 10 for protection core with burden of 15 VA per core.
(ii) 1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
(iii) 1 set of closing & tripping coil suitable for 30 Volt DC.
528 (iv) Mechanical indicator for ON/OFF. 1 Set 479750.00 #VALUE! #VALUE!
(v) Emergency Mechanical tripping through push lever.
(vi) Rear/Side entry cable box to accommodate suitable size cable.
(vii) Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor.
(viii) Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
(ix) Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc.
(x) Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It
shall be provided with cover for ventilation and shall have steel hinged doors equiped with battery & battery
charger.

Page 66 of 87
1.2 Outgoing panel
H.T. out going panels for feeding two transformers similar to incoming panel but without following
accessories.
(i) Volt meter with selector switch 2 Set
529 (ii) KWH meter with M.D.I. 316635.00 #VALUE! #VALUE!
(iii) Potential transformers
(iv) Outgoing battery charger

Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 100 KVA, 11/0,
4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off load tap changer ± 7.5%
voltage varialtion on L.T. side. These tapping should be connected by and externally separated tap changing switch. The
530 temp side in oil by thermometer should not exceed 50oC and of winding by measuring resistance should not exceed 2 No. 647662.50 #VALUE! #VALUE!
55oC over an ambient of 45oC maximum. The transformer should have cable box on HT/LT side for termination of
cables.

Main L.T. Panel


2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 1000 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 800 Amp. T.P. M.C.C.B. housed in sheet steel cubical panel fitted with
following.
(i) One set of Mechanical On/Off Indicator
(ii) One no. shunt trip oil
(iii) One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200%
for over current and 20-80% for earth fault or equivalent.
(iv) Two CTs of suitable ratio and class for protection and indication.
(v) One no. neutral link
531 (vi) One no. 96 Sq.mm. voltmeter (0-600) selector switch 2 No. 239875.00 #VALUE! #VALUE!
(vii) One no. three way and off voltmeter selector switch
(viii) One no. 96 Sq.mm. Ammeter of and suitable range
(ix) One no. three way and off Ammeter selector switch
(x) One set of red green indicating lamp
(xi) Cable connection arrangments
(xii) Inter locking arrangements

Load Distribution Panel


Floor mounting extensible type with common aluminium bus bar arrangement comprising of M.C.C.B./M.C.B.
suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector
switch, fuses etc.
532 200 Amp. x 3 nos. 1 No. 86355.00 #VALUE! #VALUE!
63 Amp. x 4 nos.

Automatic Power Factor Control Panel


Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 85 KVA to
533 improve the power factor from 0.80 lagging to 0.97. 1 No 119937.50 #VALUE! #VALUE!

534
Power Wiring and Earthing
Supply and laying of cable
535

Page 67 of 87
Supply of 11 KV XLPE cable for suitable size 3 x 50mm sq.
535.01 100 M 1439.25 #VALUE! #VALUE!

Supply of 3.50 core 240 Sq.mm aluminium PVC cable 1100 V grade.
535.02 200 M 1439.25 #VALUE! #VALUE!

Supply of Jointing cable


536

i) HT Indoor joint
536.01 5 Nos 9595 #VALUE! #VALUE!

ii) HT outdoor joint


536.02 1 Nos 14392.5 #VALUE! #VALUE!

iii) 3.50 Corex 240 Sqmm LT Joint indoor type.


536.03 60 Nos 1151.4 #VALUE! #VALUE!

537 Supply of earthing materials and earthing arrangement. 1 Set 47975 #VALUE! #VALUE!

Erection, testing and commissioning of Sub-Station including testing at work also.


538 1 Job 95950 #VALUE! #VALUE!

539 Approval of electrical inspector, electric safety. 1 Job 23987.5 #VALUE! #VALUE!

540 Painting 1 Job 9595 #VALUE! #VALUE!

541 Foundation of Transformers 1 Job 47975 #VALUE! #VALUE!

542 Fencing work 1 Job 95950 #VALUE! #VALUE!

Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule.
543 1 No. 9595 #VALUE! #VALUE!
Provision for supply and fixing of factory wired sodium vapour street lighting luminates single piece cost aluminium
body suitable for 250 watts SV on GI Pipe Bracket complete in all respect and with internal control gear.
544 1 No. 14392.5 #VALUE! #VALUE!

Internal Electrification with concealed conduct wiring including all materials and labour complete in all respect of sump.
545 Pump controlling room and staff Quarter. 1 Set 23987.5 #VALUE! #VALUE!

546 Power Sub-Station including Internal Electrification of Clear Water Pumping Stat

Page 68 of 87
HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming panel
11 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA
capacity in draw out version vaccum circuit breaker fitted with-
(i) 3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I
accuracy and 5p 10 for protection core with burden of 15 VA per core.
(ii) 1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
(iii) 1 set of closing & tripping coil suitable for 30 Volt DC.
(iv) Mechanical indicator for ON/OFF.
(v) Emergency Mechanical tripping through push lever.
(vi) Rear/Side entry cable box to accommodate suitable size cable.
(vii) Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor.
(viii) Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
547 (ix) Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc. 1 Set 479750.00 #VALUE! #VALUE!
(x) Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It
shall be provided with cover for ventilation and shall have steel hinged doors equiped with battery & battery
charger.
.

Outgoing panel
H.T. out going panels for feeding two transformers similar to incoming panel but without following
accessories.
(i) Volt meter with selector switch
548 (ii) KWH meter with M.D.I. 2 Set 316635.00 #VALUE! #VALUE!
(iii) Potential transformers
(iv) Outgoing battery charger

Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 100 KVA, 11/0,
4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off load tap changer ± 7.5%
voltage varialtion on L.T. side. These tapping should be connected by and externally separated tap changing switch. The
temp side in oil by thermometer should not exceed 50oC and of winding by measuring resistance should not exceed 2 No.
549 55oC over an ambient of 45oC maximum. The transformer should have cable box on HT/LT side for termination of 414504.00 #VALUE! #VALUE!
cables.

Page 69 of 87
Main L.T. Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 1000 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 800 Amp. T.P. M.C.C.B. housed in sheet steel cubical panel fitted with
following.
(i) One set of Mechanical On/Off Indicator
(ii) One no. shunt trip oil
(iii) One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200%
for over current and 20-80% for earth fault or equivalent.
(iv) Two CTs of suitable ratio and class for protection and indication.
(v) One no. neutral link
550 (vi) One no. 96 Sq.mm. voltmeter (0-600) selector switch 2 No. 239875.00 #VALUE! #VALUE!
(vii) One no. three way and off voltmeter selector switch
(viii) One no. 96 Sq.mm. Ammeter of and suitable range
(ix) One no. three way and off Ammeter selector switch
(x) One set of red green indicating lamp
(xi) Cable connection arrangments
(xii) Inter locking arrangements

Load Distribution Panel


Floor mounting extensible type with common aluminium bus bar arrangement comprising of M.C.C.B./M.C.B.
suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector
switch, fuses etc.
551 200 Amp. x 4 nos. 1 No. 86355.00 #VALUE! #VALUE!
63 Amp. x 4 nos.

Automatic Power Factor Control Panel


Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 80 KVA to 1 No
552 improve the power factor from 0.80 lagging to 0.97. 115140.00 #VALUE! #VALUE!

553
Power Wiring and Earthing
Supply and laying of cable
554

Supply of 11 KV XLPE cable for suitable size 3 x 50mm sq.


554.01 100 M 1439.25 #VALUE! #VALUE!

Supply of 3.50 core 240 Sq.mm aluminium PVC cable 1100 V grade.
554.02 200 M 1439.25 #VALUE! #VALUE!

Supply of Jointing cable


555

i) HT Indoor joint
555.01 5 Nos 9595 #VALUE! #VALUE!

ii) HT outdoor joint


555.02 1 Nos 14392.5 #VALUE! #VALUE!

Page 70 of 87
iii) 3.50 Corex 240 Sqmm LT Joint indoor type.
555.03 60 Nos 1151.4 #VALUE! #VALUE!

556 Supply of earthing materials and earthing arrangement. 1 Set 47975 #VALUE! #VALUE!

Erection, testing and commissioning of Sub-Station including testing at work also.


557 1 Job 95950 #VALUE! #VALUE!

558 Approval of electrical inspector, electric safety. 1 Job 23987.5 #VALUE! #VALUE!

559 Painting 1 Job 9595 #VALUE! #VALUE!

560 Foundation of Transformers 1 Job 47975 #VALUE! #VALUE!

561 Fencing work 1 Job 95950 #VALUE! #VALUE!

Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule.
562 1 No. 9595 #VALUE! #VALUE!

Provision for supply and fixing of factory wired sodium vapour street lighting luminates single piece cost aluminium
body suitable for 250 watts SV on GI Pipe Bracket complete in all respect and with internal control gear.
563 1 No. 14392.5 #VALUE! #VALUE!

Internal Electrification with concealed conduct wiring including all materials and labour complete in all respect of sump.
564 Pump controlling room and staff Quarter. 1 Set 23987.5 #VALUE! #VALUE!

565 Power Sub-Station including Internal Electrification of Clear Water Pumping Stati

HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming panel
11 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA
capacity in draw out version vaccum circuit breaker fitted with-
3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I
accuracy and 5p 10 for protection core with burden of 15 VA per core.
1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
1 set of closing & tripping coil suitable for 30 Volt DC.
566 Mechanical indicator for ON/OFF. 1 Set 479750.00 #VALUE! #VALUE!
Emergency Mechanical tripping through push lever.
Rear/Side entry cable box to accommodate suitable size cable.
Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor.
Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc.
Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It
shall be provided with cover for ventilation and shall have steel hinged doors equiped with battery & battery
charger.

Page 71 of 87
Outgoing panel
H.T. out going panels for feeding two transformers similar to incoming panel but without following
accessories.
Volt meter with selector switch 2 Set
567 KWH meter with M.D.I. 316635.00 #VALUE! #VALUE!
Potential transformers
Outgoing battery charger

Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 125 KVA, 11/0,
4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off load tap changer ± 7.5%
voltage varialtion on L.T. side. These tapping should be connected by and externally separated tap changing switch. The
temp side in oil by thermometer should not exceed 50oC and of winding by measuring resistance should not exceed
55oC over an ambient of 45oC maximum. The transformer should have cable box on HT/LT side for termination of
cables.
568 2 No. 1036260.00 #VALUE! #VALUE!

Main L.T. Panel


2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 1000 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 800 Amp. T.P. M.C.C.B. housed in sheet steel cubical panel fitted with
following.
One set of Mechanical On/Off Indicator
One no. shunt trip oil
One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200% for
over current and 20-80% for earth fault or equivalent.
Two CTs of suitable ratio and class for protection and indication.
One no. neutral link
569 One no. 96 Sq.mm. voltmeter (0-600) selector switch 2 No. 239875.00 #VALUE! #VALUE!
One no. three way and off voltmeter selector switch
One no. 96 Sq.mm. Ammeter of and suitable range
One no. three way and off Ammeter selector switch
One set of red green indicating lamp
Cable connection arrangments
Inter locking arrangements

Load Distribution Panel


Floor mounting extensible type with common aluminium bus bar arrangement comprising of M.C.C.B./M.C.B.
suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector
switch, fuses etc. 1 No.
570 86355.00 #VALUE! #VALUE!
100 Amp. x 6 nos.
63 Amp. x 2 nos.

Automatic Power Factor Control Panel


Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 150 KVA to
571 improve the power factor from 0.80 lagging to 0.97. 1 No 239875.00 #VALUE! #VALUE!

Page 72 of 87
572
Power Wiring and Earthing
Supply and laying of cable
573

Supply of 11 KV XLPE cable for suitable size 3 x 50mm sq.


573.01 100 M 1439.25 #VALUE! #VALUE!

Supply of 3.50 core 240 Sq.mm aluminium PVC cable 1100 V grade.
573.02 200 M 1439.25 #VALUE! #VALUE!

Supply of Jointing cable


574

i) HT Indoor joint
574.01 5 Nos 9595.00 #VALUE! #VALUE!

ii) HT outdoor joint


574.02 1 Nos 14392.50 #VALUE! #VALUE!

iii) 3.50 Corex 240 Sqmm LT Joint indoor type.


574.03 60 Nos 1151.40 #VALUE! #VALUE!

575 Supply of earthing materials and earthing arrangement. 1 Set 47975.00 #VALUE! #VALUE!

Erection, testing and commissioning of Sub-Station including testing at work also.


576 1 Job 95950.00 #VALUE! #VALUE!

577 Approval of electrical inspector, electric safety. 1 Job 23987.50 #VALUE! #VALUE!

578 Painting 1 Job 9595 #VALUE! #VALUE!

579 Foundation of Transformers 1 Job 47975 #VALUE! #VALUE!

580 Fencing work 1 Job 95950 #VALUE! #VALUE!

Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule.
581 1 No. 9595 #VALUE! #VALUE!

Provision for supply and fixing of factory wired sodium vapour street lighting luminates single piece cost aluminium
body suitable for 250 watts SV on GI Pipe Bracket complete in all respect and with internal control gear.
582 1 No. 14392.5 #VALUE! #VALUE!

Internal Electrification with concealed conduct wiring including all materials and labour complete in all respect of sump.
583 Pump controlling room and staff Quarter. 1 Set 23987.5 #VALUE! #VALUE!

584 Power Sub-Station including Internal Electrification of Clear Water Pumping Stati

Page 73 of 87
HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming panel
11 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA
capacity in draw out version vaccum circuit breaker fitted with-
(i) 3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I
accuracy and 5p 10 for protection core with burden of 15 VA per core.
(ii) 1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
(iii) 1 set of closing & tripping coil suitable for 30 Volt DC.
(iv) Mechanical indicator for ON/OFF.
(v) Emergency Mechanical tripping through push lever.
(vi) Rear/Side entry cable box to accommodate suitable size cable.
585 (vii) Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor. 1 Set 479750.00 #VALUE! #VALUE!
(viii) Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
(ix) Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc.
(x) Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It
shall be provided with cover for ventilation and shall have steel hinged doors equiped with battery & battery
charger.

Outgoing panel
H.T. out going panels for feeding two transformers similar to incoming panel but without following
accessories.
(i) Volt meter with selector switch
586 (ii) KWH meter with M.D.I. 2 Set 316635.00 #VALUE! #VALUE!
(iii) Potential transformers
(iv) Outgoing battery charger

Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 125
KVA, 11/0, 4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off
load tap changer ± 7.5% voltage varialtion on L.T. side. These tapping should be connected by and externally 2 No.
587 separated tap changing switch. The temp side in oil by thermometer should not exceed 50oC and of winding 414504.00 #VALUE! #VALUE!
by measuring resistance should not exceed 55oC over an ambient of 45oC maximum. The transformer should
have cable box on HT/LT side for termination of cables.

Page 74 of 87
Main L.T. Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 1000 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 800 Amp. T.P. M.C.C.B. housed in sheet steel cubical panel fitted with
following.
(i) One set of Mechanical On/Off Indicator
(ii) One no. shunt trip oil
(iii) One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200%
588 2 No. 239875.00 #VALUE! #VALUE!
for over current and 20-80% for earth fault or equivalent.
(iv) Two CTs of suitable ratio and class for protection and indication.
(v) One no. neutral link
(vi) One no. 96 Sq.mm. voltmeter (0-600) selector switch
(vii) One no. three way and off voltmeter selector switch
(viii) One no. 96 Sq.mm. Ammeter of and suitable range
(ix) One no. three way and off Ammeter selector switch
(x) One set of red green indicating lamp
(xi) Cable connection arrangements
(xii) Inter locking arrangements

Load Distribution Panel


Floor mounting extensible type with common aluminium bus bar arrangement comprising of M.C.C.B./M.C.B.
suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector 1 No.
589 switch, fuses etc. 86355.00 #VALUE! #VALUE!
100 Amp. x 6 nos.
63 Amp. x 2 nos

Automatic Power Factor Control Panel


Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 119 KVA to
590 improve the power factor from 0.80 lagging to 0.97. 1 No 191900.00 #VALUE! #VALUE!

591
Power Wiring and Earthing
Supply and laying of cable
592

Supply of 11 KV XLPE cable for suitable size 3 x 50mm sq.


592.01 100 M 1439.25 #VALUE! #VALUE!

Supply of 3.50 core 240 Sq.mm aluminium PVC cable 1100 V grade.
592.02 200 M 1439.25 #VALUE! #VALUE!

Supply of Jointing cable


593

i) HT Indoor joint
593.01 5 Nos 9595.00 #VALUE! #VALUE!

ii) HT outdoor joint


593.02 1 Nos 14392.50 #VALUE! #VALUE!

Page 75 of 87
iii) 3.50 Corex 240 Sqmm LT Joint indoor type.
593.03 60 Nos 1151.40 #VALUE! #VALUE!

594 Supply of earthing materials and earthing arrangement. 1 Set 47975.00 #VALUE! #VALUE!

Erection, testing and commissioning of Sub-Station including testing at work also.


595 1 Job 95950.00 #VALUE! #VALUE!

596 Approval of electrical inspector, electric safety. 1 Job 23987.50 #VALUE! #VALUE!

597 Painting 1 Job 9595.00 #VALUE! #VALUE!

598 Foundation of Transformers 1 Job 47975.00 #VALUE! #VALUE!

599 Fencing work 1 Job 95950.00 #VALUE! #VALUE!

Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule.
600 1 No. 9595.00 #VALUE! #VALUE!

Provision for supply and fixing of factory wired sodium vapour street lighting luminates single piece cost aluminium
body suitable for 250 watts SV on GI Pipe Bracket complete in all respect and with internal control gear.
601 1 No. 14392.50 #VALUE! #VALUE!

Internal Electrification with concealed conduct wiring including all materials and labour complete in all respect of sump.
602 Pump controlling room and staff Quarter. 1 Set 23987.50 #VALUE! #VALUE!

603 Power Sub-Station including Internal Electrification of Clear Water Pumping Stat
HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming panel
11 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA
capacity in draw out version vacuum circuit breaker fitted with-
(i) 3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I
accuracy and 5p 10 for protection core with burden of 15 VA per core.
(ii) 1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
(iii) 1 set of closing & tripping coil suitable for 30 Volt DC.
(iv) Mechanical indicator for ON/OFF.
(v) Emergency Mechanical tripping through push lever.
(vi) Rear/Side entry cable box to accommodate suitable size cable.
604 (vii) Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor. 1 Set 479750.00 #VALUE! #VALUE!
(viii) Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
(ix) Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc.
(x) Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It
shall be provided with cover for ventilation and shall have steel hinged doors equiped with battery & battery
charger.

Page 76 of 87
Outgoing panel
H.T. out going panels for feeding two transformers similar to incoming panel but without following
accessories.
(i) Volt meter with selector switch
605 (ii) KWH meter with M.D.I. 2 Set 316635.00 #VALUE! #VALUE!
(iii) Potential transformers
(iv) Outgoing battery charger

Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 100
KVA, 11/0, 4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off
load tap changer ± 7.5% voltage varialtion on L.T. side. These tapping should be connected by and externally
separated tap changing switch. The temp side in oil by thermometer should not exceed 50oC and of winding
606 by measuring resistance should not exceed 55oC over an ambient of 45oC maximum. The transformer should 2 No. 414504.00 #VALUE! #VALUE!
have cable box on HT/LT side for termination of cables.

Main L.T. Panel


2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 1000 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 800 Amp. T.P. M.C.C.B. housed in sheet steel cubical panel fitted with
following.
(i) One set of Mechanical On/Off Indicator
(ii) One no. shunt trip oil
(iii) One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200%
for over current and 20-80% for earth fault or equivalent.
(iv) Two CTs of suitable ratio and class for protection and indication.
607 (v) One no. neutral link 2 No. 239875.00 #VALUE! #VALUE!
(vi) One no. 96 Sq.mm. voltmeter (0-600) selector switch
(vii) One no. three way and off voltmeter selector switch
(viii) One no. 96 Sq.mm. Ammeter of and suitable range
(ix) One no. three way and off Ammeter selector switch
(x) One set of red green indicating lamp
(xi) Cable connection arrangments
(xii) Inter locking arrangements

Load Distribution Panel


Floor mounting extensible type with common aluminium bus bar arrangement comprising of M.C.C.B./M.C.B.
suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector
switch, fuses etc. 1 No.
608 86355.00 #VALUE! #VALUE!
200 Amp. x 3 nos.
63 Amp. x 2 nos.

Automatic Power Factor Control Panel


Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 63 KVA to
609 improve the power factor from 0.80 lagging to 0.97. 1 No 139127.50 #VALUE! #VALUE!

610 Power Wiring and Earthing

611 Supply and laying of cable

Page 77 of 87
611.01 Supply of 11 KV XLPE cable for suitable size 3 x 50mm sq. 100 M 1439.25 #VALUE! #VALUE!

611.02 Supply of 3.50 core 240 Sq.mm aluminium PVC cable 1100 V grade. 200 M 1439.25 #VALUE! #VALUE!

612 Supply of Jointing cable

612.01 i) HT Indoor joint 5 Nos 9595.00 #VALUE! #VALUE!

612.02 ii) HT outdoor joint 1 Nos 14392.50 #VALUE! #VALUE!

612.03 iii) 3.50 Corex 240 Sqmm LT Joint indoor type. 60 Nos 1151.40 #VALUE! #VALUE!

613 Supply of earthing materials and earthing arrangement. 1 Set 47975.00 #VALUE! #VALUE!

614 Erection, testing and commissioning of Sub-Station including testing at work also. 1 Job 95950.00 #VALUE! #VALUE!

615 Approval of electrical inspector, electric safety. 1 Job 23987.50 #VALUE! #VALUE!

616 Painting 1 Job 9595.00 #VALUE! #VALUE!

617 Foundation of Transformers 1 Job 47975.00 #VALUE! #VALUE!

618 Fencing work 1 Job 95950.00 #VALUE! #VALUE!

619 Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule. 1 No. 9595.00 #VALUE! #VALUE!

Provision for supply and fixing of factory wired sodium vapour street lighting luminates single piece cost
620 aluminium body suitable for 250 watts SV on GI Pipe Bracket complete in all respect and with internal control 1 No. 14392.50 #VALUE! #VALUE!
gear.

Internal Electrification with concealed conduct wiring including all materials and labour complete in all
621 respect of sump. Pump controlling room and staff Quarter. 1 Set 23987.50 #VALUE! #VALUE!

622 Power Sub-Station including Internal Electrification of Clear Water Pumping Stat

Page 78 of 87
1 HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
1.1 Incoming panel
11 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA
capacity in draw out version vaccum circuit breaker fitted with-
(i) 3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I
accuracy and 5p 10 for protection core with burden of 15 VA per core.
(ii) 1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
(iii) 1 set of closing & tripping coil suitable for 30 Volt DC.
(iv) Mechanical indicator for ON/OFF.
(v) Emergency Mechanical tripping through push lever.
(vi) Rear/Side entry cable box to accommodate suitable size cable.
623 (vii) Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor. 1 Set 479750.00 #VALUE! #VALUE!
(viii) Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
(ix) Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc.
(x) Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It
shall be provided with cover for ventilation and shall have steel hinged doors equiped with battery & battery
charger.

1.2 Outgoing panel


H.T. out going panels for feeding two transformers similar to incoming panel but without following
accessories.
(i) Volt meter with selector switch 2 Set
624 (ii) KWH meter with M.D.I. 316635.00 #VALUE! #VALUE!
(iii) Potential transformers
(iv) Outgoing battery charger

Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 63 KVA, 11/0,
4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off load tap changer ± 7.5%
voltage varialtion on L.T. side. These tapping should be connected by and externally separated tap changing switch. The
temp side in oil by thermometer should not exceed 50oC and of winding by measuring resistance should not exceed 2 No.
625 55oC over an ambient of 45oC maximum. The transformer should have cable box on HT/LT side for termination of 1439250.00 #VALUE! #VALUE!
cables.

Page 79 of 87
Main L.T. Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminium Bus
bar of 1000 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 800 Amp. T.P. M.C.C.B. housed in sheet steel cubical panel fitted with
following.
One set of Mechanical On/Off Indicator
One no. shunt trip oil
One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200% for
626 over current and 20-80% for earth fault or equivalent. 2 No. 239875.00 #VALUE! #VALUE!
Two CTs of suitable ratio and class for protection and indication.
One no. neutral link
One no. 96 Sq.mm. voltmeter (0-600) selector switch
One no. three way and off voltmeter selector switch
One no. 96 Sq.mm. Ammeter of and suitable range
One no. three way and off Ammeter selector switch
One set of red green indicating lamp
Cable connection arrangments
Inter locking arrangements

Load Distribution Panel


Floor mounting extensible type with common aluminium bus bar arrangement comprising of M.C.C.B./M.C.B.
suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector
switch, fuses etc.
627 100 Amp. x 4 nos. 1 No. 86355.00 #VALUE! #VALUE!
63 Amp. x 2 nos.

Automatic Power Factor Control Panel


Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 39 KVA to
628 improve the power factor from 0.80 lagging to 0.97. 1 No 95950.00 #VALUE! #VALUE!

629
Power Wiring and Earthing
Supply and laying of cable
630

Supply of 11 KV XLPE cable for suitable size 3 x 50mm sq.


630.01 100 M 1439.25 #VALUE! #VALUE!
Supply of 3.50 core 240 Sq.mm aluminium PVC cable 1100 V grade.
630.02 200 M 1439.25 #VALUE! #VALUE!

Supply of Jointing cable


631

i) HT Indoor joint
631.01 5 Nos 9595.00 #VALUE! #VALUE!

ii) HT outdoor joint


631.02 1 Nos 14392.50 #VALUE! #VALUE!

Page 80 of 87
iii) 3.50 Corex 240 Sqmm LT Joint indoor type.
631.03 60 Nos 1151.40 #VALUE! #VALUE!

632 Supply of earthing materials and earthing arrangement. 1 Set 47975.00 #VALUE! #VALUE!

Erection, testing and commissioning of Sub-Station including testing at work also.


633 1 Job 95950.00 #VALUE! #VALUE!

634 Approval of electrical inspector, electric safety. 1 Job 23987.50 #VALUE! #VALUE!

635 Painting 1 Job 9595.00 #VALUE! #VALUE!

636 Foundation of Transformers 1 Job 47975.00 #VALUE! #VALUE!

637 Fencing work 1 Job 95950.00 #VALUE! #VALUE!

Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule.
638 1 No. 9595.00 #VALUE! #VALUE!

Provision for supply and fixing of factory wired sodium vapour street lighting luminates single piece cost aluminium
body suitable for 250 watts SV on GI Pipe Bracket complete in all respect and with internal control gear.
639 1 No. 14392.50 #VALUE! #VALUE!

Internal Electrification with concealed conduct wiring including all materials and labour complete in all respect of sump.
640 Pump controlling room and staff Quarter. 1 Set 23987.50 #VALUE! #VALUE!

Page 81 of 87
641 Power Sub-Station including Internal Electrification of Clear Water Pumping Stati
HT Control Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming panel
11 KV/400 Amp. 3 Phase 3 wire 50 Hz. HT incoming panel with a short circuit breaking current up to 18.4 KVA
capacity in draw out version vaccum circuit breaker fitted with-
(i) 3 Nos. single phase double core epoxy bar primary time current transformer of suitable ratio of class I
accuracy and 5p 10 for protection core with burden of 15 VA per core.
(ii) 1 no. 3 phase resin cast draw out type PT of ratio 11 KV/110 volt of class I accuracy and 100 VA burden.
(iii) 1 set of closing & tripping coil suitable for 30 Volt DC.
(iv) Mechanical indicator for ON/OFF.
(v) Emergency Mechanical tripping through push lever.
(vi) Rear/Side entry cable box to accommodate suitable size cable.
642 (vii) Energy Analyzer of measuring parameters such as voltage, current, KW, KWH, KVA & Power factor. 1 Job 479750.00 #VALUE! #VALUE!
(viii) Indicating lamp assembly for breaker ON/OFF trapping spring, charge.
(ix) Over current and earth fault relay, C.D.G. 31 having elements for over current and one for earth fault etc.
(x) Incoming panel will be followed by a battery charge unit having specification as under
The Cabinet of Suitable thickness shall be enclosed type to ensure the atmosphere is absolutely acid free. It
shall be provided with cover for ventilation and shall have steel hinged doors equiped with battery & battery
charger.

Outgoing panel
H.T. out going panels for feeding two transformers similar to incoming panel but without following
accessories.
(i) Volt meter with selector switch
(ii) KWH meter with M.D.I.
643 (iii) Potential transformers 2 Set 316635.00 #VALUE! #VALUE!
(iv) Outgoing battery charger

Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 100
KVA, 11/0, 4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off
load tap changer ± 7.5% voltage varialtion on L.T. side. These tapping should be connected by and externally
separated tap changing switch. The temp side in oil by thermometer should not exceed 50oC and of winding
644 by measuring resistance should not exceed 55oC over an ambient of 45oC maximum. The transformer should 2 No. 414504.00 #VALUE! #VALUE!
have cable box on HT/LT side for termination of cables.

Page 82 of 87
Main L.T. Panel
2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control
panel comprising of following items.
Incoming Panel
Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminum Bus bar
of 1000 Amp. with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor
installation type and comprising of 800 Amp. T.P. M.C.C.B. housed in sheet steel cubical panel fitted with
following.
(i) One set of Mechanical On/Off Indicator
(ii) One no. shunt trip oil
(iii) One set of T.P.I.D. M.T. Non-directional combined over current and earth fault relay having setting 50-200%
for over current and 20-80% for earth fault or equivalent.
(iv) Two CTs of suitable ratio and class for protection and indication.
645 (v) One no. neutral link 2 No. 239875.00 #VALUE! #VALUE!
(vi) One no. 96 Sq.mm. voltmeter (0-600) selector switch
(vii) One no. three way and off voltmeter selector switch
(viii) One no. 96 Sq.mm. Ammeter of and suitable range
(ix) One no. three way and off Ammeter selector switch
(x) One set of red green indicating lamp
(xi) Cable connection arrangments
(xii) Inter locking arrangements

Load Distribution Panel


Floor mounting extensible type with common aluminium bus bar arrangement comprising of M.C.C.B./M.C.B.
suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete
including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector
switch, fuses etc. 1 No.
646 86355.00 #VALUE! #VALUE!
200 Amp. x 4 nos.
63 Amp. x 2 nos.

Automatic Power Factor Control Panel


Provision for suitable capacity atuo power factor control panel (APFCP) for maximum load of 65 KVA to
647 improve the power factor from 0.80 lagging to 0.97. 1 No 139127.50 #VALUE! #VALUE!

648
Power Wiring and Earthing
Supply and laying of cable
649

Supply of 11 KV XLPE cable for suitable size 3 x 50mm sq.


649.01 100 M 1439.25 #VALUE! #VALUE!

Supply of 3.50 core 240 Sq.mm aluminium PVC cable 1100 V grade.
649.02 200 M 1439.25 #VALUE! #VALUE!

Supply of Jointing cable


650

i) HT Indoor joint
650.01 5 Nos 9595.00 #VALUE! #VALUE!

ii) HT outdoor joint


650.02 1 Nos 14392.50 #VALUE! #VALUE!

Page 83 of 87
iii) 3.50 Corex 240 Sqmm LT Joint indoor type.
650.03 60 Nos 1151.40 #VALUE! #VALUE!

Supply of earthing materials and earthing arrangement.


651 1 Set 47975.00 #VALUE! #VALUE!

Erection, testing and commissioning of Sub-Station including testing at work also.


652 1 Job 95950.00 #VALUE! #VALUE!

Approval of electrical inspector, electric safety.


653 1 Job 23987.50 #VALUE! #VALUE!

Painting
654 1 Job 9595.00 #VALUE! #VALUE!

Foundation of Transformers
655 1 Job 47975.00 #VALUE! #VALUE!

Fencing work
656 1 Job 95950.00 #VALUE! #VALUE!

Provision for steel Tubular swaged pole of 9.00 mt length including its all accessories as per I.e. rule.
657 1 No. 9595.00 #VALUE! #VALUE!

Provision for supply and fixing of factory wired sodium vapour street lighting luminates single piece cost
658 aluminium body suitable for 250 watts SV on GI Pipe Bracket complete in all respect and with internal control 1 No. 14392.50 #VALUE! #VALUE!
gear.
Internal Electrification with concealed conduct wiring including all materials and labour complete in all
659 respect of sump. Pump controlling room and staff Quarter. 1 Set 23987.50 #VALUE! #VALUE!

660 CHLORINATING PLANT


Chlorinating of Raw Water pumping Station : Provisional for chlorination of non energy based dosing system
with all the accessories for 42000 Ltre/minut capacity based on either cd 5000 or sodiam hypochloride solution
661
(2 PPM to 0.5 PPM) 1 Set 374205.00 #VALUE! #VALUE!

Provisition for chlorination of non energy based dosing system with all accessories for Installed capacity at
Zonal CWRs based on either cd 5000 or sodiam hypochloride solution (2 PPM to 0.5 PPM)
662

662.01 Pumping station of Zone-1 2 No 163115.00 #VALUE! #VALUE!

662.02 Pumping station of Zone-2 1 No 81557.50 #VALUE! #VALUE!

662.03 Pumping station of Zone-2 A 1 No 163115.00 #VALUE! #VALUE!

662.04 Pumping station of Zone-2 A 1 No 81557.50 #VALUE! #VALUE!

662.05 Pumping station of Zone-2 B 1 No 81557.50 #VALUE! #VALUE!

662.06 Pumping station of Zone-2 B 1 No 163115.00 #VALUE! #VALUE!

Page 84 of 87
Pumping station of Zone-3
662.07 2 No 163115.00 #VALUE! #VALUE!

662.08 Pumping station of Zone-4 1 No 81557.50 #VALUE! #VALUE!

662.09 Pumping station of Zone-5 1 No 163115.00 #VALUE! #VALUE!

Pumping station of Zone-5 A


662.1 1 No 244672.50 #VALUE! #VALUE!

Pumping station of Zone-5 B


662.11 1 No 163115.00 #VALUE! #VALUE!

Pumping station of Zone-6


662.12 1 No 244672.50 #VALUE! #VALUE!

Total in
Figures INR #VALUE! #VALUE!

Quoted Rate in Figures


Excess (+) 2.29% #VALUE! #VALUE!

Quoted Rate in Words #VALUE!

Page 85 of 87
Please Enable Macros to View BoQ information
Q information

You might also like