This document provides a list of instruments available in a control system and instrumentation laboratory, including their specifications. It includes digital oscilloscopes, DC power supplies, function generators, lag-lead compensators, PID controllers for servomotors, position control systems using synchrosopes, LVDT meters, strain gauges, and an interface for a PLC data acquisition system. In total, there are 10 different instruments described.
This document provides a list of instruments available in a control system and instrumentation laboratory, including their specifications. It includes digital oscilloscopes, DC power supplies, function generators, lag-lead compensators, PID controllers for servomotors, position control systems using synchrosopes, LVDT meters, strain gauges, and an interface for a PLC data acquisition system. In total, there are 10 different instruments described.
This document provides a list of instruments available in a control system and instrumentation laboratory, including their specifications. It includes digital oscilloscopes, DC power supplies, function generators, lag-lead compensators, PID controllers for servomotors, position control systems using synchrosopes, LVDT meters, strain gauges, and an interface for a PLC data acquisition system. In total, there are 10 different instruments described.
Name 1 Digital storage Bandwidth : 50/70/1000 MHz 2 nos. oscilloscope Real-time sampling rates : 500 m Sa/s Memory depth : 32Kpts 2 D.C. Power 0-30 V 4 nos. supply 3A dc dual power supply with automatic overload protection 3 D.C. Power 300v/3A 2 nos. supply 4 Function 1 MHz-10mHz function/Arbitrary waveform 2 nos. generator generator with 50 MHz frequency counter and time mark generator 5 Lag-Lead Kit Working voltage :(220-240)VAC 2 nos. compensator Input Voltage :24V AC Input Frequency :50Hz Output Current :0.5Amps 6 P,PI,PID Max Speed:5000 2 nos. controller and Moment of Inertia:0.014 apply PID Load Inertia: Up to 30 times Motor Inertia controller to Rated Power Rate:18.1 Servomotor 7 Position control Type: Electro-Mechanical 2 nos. system using Voltage at synchronism: 110V ± 2% Synchroscope Operating voltage: 110V ± 20% Frequency: 50 / 60Hz ± 5% 8 LVDT meter 10/20mm,2.5KHz,sensitivity-10mV/mm 2 nos. 9 Strain gauge 0.3mm to 60mm,Within ±0.3%of the 1 nos. nominal resistance ,Cu-Ni Alloy 10 Interface of PLC GM10 Data Acquisition Module 1 nos. with PC for data GM90MB Module Base acquisition GM90PS Power Supply Module system