Professional Documents
Culture Documents
Applied Mechanics
Applied Mechanics
1
2. a. What should be the value of angle so that motion of the 90N 7
block impends down the plane? The coefficient of friction for all
surfaces is 1/3.
2
OR
A ball is dropped vertically on to 200 inclined plane at A. The 8
direction of rebound forms an angle of 350 with the vertical.
Knowing that the ball strikes the inclined plane at B,
determine:
i. The velocity of rebound at A
ii. The time required for the ball to travel from A to B
4. The two block shown are originally at rest. The coefficient of friction 15
between the blocks and inclines are s = 0.25 and k = 0.2. Neglecting
the masses of the pulleys. Determine
a. The acceleration on each block
b. The tension in the cable
3
5. A system consists of three particles A, B, C. We know that m A = 3 kg, 15
mB = 2 kgand mC = 4 kg that the velocities of the particles expressed in
m/s are respectively, vA = 4i + 2j + 2k, vB = 4i + 3j, and vC = -2i + 4j +
2k. Determine (a) the angular momentum of the system about O,
(b) Linear momentum of the system and (c) Mass centre of the system
4
OR
A uniform rod for length L and mass m is supported as shown. If the
cable attached at the end B suddenly breaks, determine (a) the
acceleration of end B, (b) the reaction at the pin support