Professional Documents
Culture Documents
Contoh Soalan
Contoh Soalan
Contoh Soalan
TEMPAT/VENUE : BANGI
Jawab SEMUA soalan dalam bahagian A dan TIGA (3) soalan sahaja dalam
bahagian B. Mulakan setiap jawapan pada kertas Jawapan yang baru.
Answer ALL questions in Part A and THREE (3) questions only in Part B.
Answer each question on a separate answer sheet.
A. mg/m3
B. fiber/ml
C. mg/sample
D. ppm
A. 20 bpj
B. 30 bpj
C. 2 bpj
D. 3 bpj
A. 20 ppm
B. 30 ppm
C. 2 ppm
D. 3 ppm
3/14
6. Manakah antara yang berikut adalah bentuk meruap sesuatu bahan yang
kebiasaannya dalam bentuk pepejal atau cecair pada suhu dan tekanan
bilik?
A. wasap
B. wap
C. kabus
D. gas
Which of the following are volatile form of substances that are normally in
solid or liquid state at room temperature and pressure?
A. Fumes
B. Vapors
C. Mists
D. Gases
A respirable dust can penetrate all the way to which part of the respiratory
tract?
A. Paras tanah
B. Berhampiran laluan masuk kawasan kerja
C. Zon pernafasan
D. Kawasan panas
6/14
When conducting personal air sampling, where should the sample is taken
from?
A. Ground level
B. Near entryways work area
C. Breathing zone
D. Warmest area
A. Hazad biologi
B. Hazad fizikal
C. Hazad mekanikal
D. Hazad kimia
A. Biological hazard
B. Physical hazard
C. Mechanical hazard
D. Chemical hazard
12. Apakah jenis bunyi bising yang disebabkan oleh mesin cerucuk dalam
industri membinaan?
A. Berterusan
B. Impulsif
C. Antaraberkala
D. Tahap setara
A. Continuous
B. Impulsive
C. Intermittent
D. Steady state
13. Rangkaian paip yang menyambungkan “hood” dan sistem komponen yang
lain dalam sistem pengalihudaraan setempat adalah dikenali sebagai
A. serombong
B. penghantar
C. saluran
7/14
D. palung
The network of piping that connects the hoods and other system components
in local exhaust ventilation system is known as
A. stacks
B. conveyors
C. ducts
D. hoppers
14. Manakah antara kaedah yang berikut biasa digunakan untuk menganalisa
logam?
A. Gas chromatography
B. Atomic Absorption
C. Ultraviolet Spectrometry
D. Infrared Spectrometry
A. Sinaran-X
B. Sinaran Gama
C. Zarah Beta
D. Sinaran Ultra Ungu
A. X-ray
B. Gama ray
C. Beta particle
D. Ultra Violet ray
16. Apakah kaedah yang praktikal untuk mengukur pendedahan kepada bunyi
bising bagi pekerja?
C. an octave-band analyzer
D. a sound survey meter
D. Application of shielding
20. Alat perlindungan diri yang mencukupi mestilah memenuhi ciri-ciri yang
berikut KECUALI
A. Berteknologi tinggi
B. Sesuai
C. Padan dengan saiz pekerja
D. Sentiasa tersedia
A. High tech
B. Suitable
C. Fit the employees
D. Readily available
10/14
Arahan : Jawab TIGA (3) soalan di dalam helaian jawapan yang disediakan.
Instruction : Answer THREE (3) questions only on the answer sheet provided.
SOALAN 1/QUESTION 1
(b) Senaraikan jenis-jenis hazad dalam higien pekerjaan dan berikan SATU
(1) contoh untuk setiap hazad.
List the type of hazard in industrial hygiene and give ONE (1) example of
each hazard.
[5 Markah/5 Marks]
[8 Markah/8 Marks]
[2 Markah/2 Marks]
SOALAN 2/QUESTION 2
What are the workers 8 hour time weighted average (TWA) exposure for
the day?
[10 Markah/10 Marks]
(b) Berapakah kepekatan dalam unit bpj jika berat molekul untuk Xilena ialah
106.17?
SOALAN 3/QUESTION 3
(a) Senaraikan dan jelaskan secara ringkas setiap bahagian dalam sistem
pengalihudaraan setempat.
List and briefly explain on the function of each part in local exhaust
ventilation system.
[6 Markah/6 Marks]
Estimate the noise level that would result from the combined exposure to
the following noise sources
SOALAN 4/QUESTION 4
Explain the relationship between indoor air quality problem and energy
conservation measures.
13/14
[2 Markah/2 Marks]
SOALAN 5/QUESTION 5
(b) Terangkan EMPAT (4) faktor yang diperlukan untuk menilai keberkesanan
tindakan pengawalan.
(c) Jelaskan EMPAT (4) masalah yang mungkin akan timbul daripada
penggunaan alat pelindung pernafasan.
Describe FOUR (4) problems that may arise from using respirator.
[8 Markah/8 Marks]
14/14
FORMULA
Eighth hour Time Weighted Average(8hrTWA)= C1T1 + C2T2 + C3T3 ………+ CnTn
T1+ T2+ T3…..+ C3Tn