Professional Documents
Culture Documents
Schneider Electric Educational Solutions 2018-115-117
Schneider Electric Educational Solutions 2018-115-117
Description
Water tank and head
• 1 tank with a capacity of about 150 L.
• 1 motor pump unit with a stainless steel body.
• 1 electrical box equipped with an Altivar 4 kW variable speed controller,
piloted by a 0-10 V system or by CANopen.
• Hydraulic circuit with valve and bleeder.
Electrical cabinet.
• 1 user socket.
• 1 pilotable battery of capacitors.
• 1 measurement module with 3 CTs.
• 1 Modicon M241 or M340 PLC with CANopen bus.
• 1 graphic dialogue terminal with touch entry system.
• 1 voltage regulator (energy recovery and creation of the three-phase
power supply).
• Components necessary for safety and correct operation.
• PCVUE monitoring system with 25 variables.
• Two electricity meters (generation and non-consumption).
Front view
References
HYDROLIS direct coupling and Modicon M340 MD1HYDROM340
HYDROLIS direct coupling and Modicon M241 MD1HYDROM241
HYDROLIS training MD1HYDFORM
Basic version
• 1 PLC managing the generation, storage and consumption sequences.
• 1 display unit showing the electrical variables U/I/P.
• 1 inverter for isolated locations.
• Loads via 230 V and 24 V lamps or exterior load.
Rear view
References
Renewable sources of energy bench, basic version MDG99400
Renewable sources of energy bench, version with simulated MDG99401
power supply
Renewable sources of energy bench, version with storage MDG99402
batteries
Renewable sources of energy bench, version with power supply MDG99403
and batteries
Configuration sheets
References
Fixed solar panels for Renewable energy study bench MDG99410
Solar tracker, connected version, for Renewable energy MDG99420
study bench
Solarimeter and thermometer for Renewable energy study MDG99415
bench
Motorised wind turbine for Renewable energy study bench MDG99430
Outside wind turbine on mast for Renewable energy study MDG99440
bench