Professional Documents
Culture Documents
Indian Learners Own Academy: YEAR 2015-16 Ohm'S Law
Indian Learners Own Academy: YEAR 2015-16 Ohm'S Law
Indian Learners Own Academy: YEAR 2015-16 Ohm'S Law
OWN LEARNERS
ACADEMY
YEAR 2015-16
OHM’S LAW
CERTIFICATE
This is to certify that HENA HANEEFA, a student
of CLASS XII, has successfully completed the
research on the below mentioned project under
the guidance of MRS.RINI (Subject teacher)
during the year 2015-16.
ACKNOWLEDGEMENT
I Wish to thank my ever loving parents
without whose continuous support,
encouragement and never ending love
this project could ever seize to exist.
I would like to express my sincere
gratitude to my chemistry teachers mrs .
RINI who inspired me and my partner in
this project, to work with this topic.
Finally, I submit my gratefulness to the
lord almighty without whose grace and
blessings this project would not be
completed.
INDEX
1. CERTIFICATE OF EXCELLENCE
2. ACKNOWLEDGEMENT
3. AIM OF PROJECT
4. INTRODUCTION
5. APPARATUS REQUIRED
6. PROCEDURE FOLLOWED
7. OBSERVATION
8. CONCLUSION
9. PRECAUTION
10. BIBLIOGRAPHY
INTRODUCTION
Ohm's Law deals with the relationship between voltage and
current in an ideal conductor. This relationship states that:
The potential difference (voltage) across an ideal
conductor is proportional to the current through it.
The constant of proportionality is called the "resistance", R.
Ohm's Law is given by:
V=I
R
=I
R
EXPERIMENT
Apparatus:
1. 4 varied value of resistors
2. Power supply
3. Connecting wires
4. Multimeter Variables: Independent: Resistance Dependent:
Current Controlled: Electromotive force Procedures:
1. Set up the apparatus to be the circuit as shown in diagram
of hypothesis.
2. Set the value of electromotive force into 3 V.
3. Put the 12-ohm resistor and see the value of current in the
Multimeter.
4. Change the 12-ohm resistor with 82 and 470-ohm resistor
variedly and repeat step 3.
5. Change the value of electromotive force into 6 V.
6. Repeat steps 3 and 4 (use 56-ohm resistor instead of 12-
ohm resistor, because the value of 12-ohm resistor is too
small for 6V of electromoti ve force).
7. Record the data in this table:
FOR MAGNENIN:
SR.NO: A=I V R
1 1 0.3 0.3
2 0.4 1.0 0.4
3 0.75 0.25 0.3
4 1.5 0.6 0.4
5 2.7 1.2 0.4
FOR CONSTANINE:
SR.NO: A=I V R
1 0.5 1.2 2.4
2 1 2.5 2.5
3 1.5 4 2.66
4
5
FOR COPPER:
SR.NO: A=I V R
1 1.1 0.18 0.16