Professional Documents
Culture Documents
Em para Motores
Em para Motores
Em para Motores
Solutions
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 2
Serving Your Complete System Needs
Phillips & Temro is a leader in these markets because Our silencers are designed and developed utilizing a
we offer a full range of standardized silencers and full complement of computer generated models and
accessories as well as custom engineered sound acoustic performance analysis tools. These software
attenuation solutions to meet our customer’s tools together with bench testing data collection
requirements. Our engineering staff within the Silencer allow our engineering team to accurately design high
Division is fully capable to design and manufacture performing silencing systems.
exhaust systems to a high level of performance through
computer system modeling, analysis and testing.
TABLE OF CONTENTS
CONTENTS PAGE # ACCESSORIES Flex Connectors
Rain Guards and Caps Male NPT / Male NPT 45
Cylindrical Male NPT / Slotted Cuff 45
Industrial - JI Series 6 Rainguards – Model RGF 29
20 Degree Lip Flange / Male NPT 46
Residential - JR Series 7 Rainguards – Model RGS 29
Slotted Cuff / Slotted Cuff 46
Critical - JC Series 8 Pipe Raincaps – Model RCP 30 Flange / Flange 47
Hospital - JH Series 9 Tube Raincaps – Model RCT 30 Flange / Male NPT 47
Tandem LPC Series 10 Elbows Flange / Slotted Cuff 48
Tandem LPH Series 11 90° Short Radius Tube 31 Flange / Female NPT 48
90° Short Radius Tube Flange / 20 Degree Lip Flange 49
Low Pressure Drop Flange / Flanged 90° Elbow 49
Residential - Low Pressure TAU Series 12 With Flange One End 32
Male NPT / Flanged 90° Elbow 50
Critical - Low Pressure TBU Series 13 Outlet Extension – Straight Tube ANSI
Female NPT / Flanged 90° Elbow 50
Flange Both Ends 33
Disk Mounting Supports
Critical - DCK2 Series 14 Flanges Type A and B Mounting Legs 51
Hospital - DHK Series 15 125/150# ANSI – Model PFL 34 Type D Vertical Shell Lug Supports 52
125/150# ANSI – Model TFL 35 Type E Horizontal Shell Lug Supports 53
Disk - High Pressure Series Single Reducing Plate – Model REFL 36 Type F Horizontal Saddle Supports 54
Critical - High Pressure DCP2 Series 16 Double Reducing Plate – Model DREFL 37
Hospital - High Pressure DHP Series 17 Other
Cast Iron Screwed – Model FLT 38 Sure Seal Clamps 55
Spark Arresting Caterpillar – Model CAFL 39 Explosion Relief Covers 56
Industrial - SSU Series 18 Detroit Diesel / Mitsubishi– Model DFL 40 Inspection Ports 57
Residential - SRU Series 19 Cummins / Onan – Model CUFL 41 Wall Thimbles 58
Critical - SCU Series 20 Mounting Bands Wye Connector
Hospital - SHU Series 21 Round – RMB Model 42 Cummins 59-60
Industrial - ATEX SSA Series 22 Oval – OMB Model 42 Caterpillar 61
Residential - ATEX SRA Series 23 Detroit 62-65
Critical - ATEX SCA Series 24 Gaskets
Ring Gaskets and Gasket Kits 43 Limited Warranty 68
Hospital - ATEX SHA Series 25
Ring Gaskets and Gasket Kits – 44
Industrial - SAU Series 26
Caterpillar, Cummins,
Critical - Disk DCS Series 27
Detroit Diesel / MTU
Hospital - Disk DHS Series 28
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 3
Serving Your Complete System Needs
Single Silencer with Single Inlet Engine Exhaust Silencer & Accessories:
4
1. Silencer
2. Flex Connection
3. Mounting Band
6
4. Rain Cap
1 3 7 5. Mitered Exhaust
7 6. Elbows
5 7. Flange/Gasket
2
2
5
straight pipe to stay within the manufacturers
maximum allowable back pressure.
• Silencer and Piping Supports: The silencer and
piping system shall be mounted so that its weight is
not supported by the engine. When at all possible,
a vibration isolating type mounting support shall be
used.
Dual Silencers with Single Inlet
4
• Exhaust Pipe Termination: The exhaust pipe
extending from the silencer shall use a rain cap or
mitered exhaust with bird screen at the end of each
exhaust run to prevent rain, snow, birds, debris, etc.
1 3 7
6
from entering the engine exhaust system when the
7 engine is not running.
2
5
The total exhaust system when at all possible, shall be
the product of a single manufacture. This will insure
the best form, fit and function during exhaust system
installation and operations. The total exhaust system
includes the silencer, silencer mounting supports, flex
connector and accessories. Where applicable, the
exhaust system components shall be supplied with a
1200° satin black finish. When a specified dBA level is
required for a certain distance, please consult silencer
manufacturer for correct silencer model and design.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 4
Serving Your Complete System Needs
Disk Silencer* with Single Bottom Inlet/Side Consult your sales representative or the
Outlet Wye Option factory for various construction options:
• Specific inlet/outlet configurations and orientations
• Flush mounted flanges
• Flanges with weld nuts
• Integral roof plate design
• Comprehensive line of exhaust accessories
• Stainless steel construction
• Internal Thermal Insulation – Top, Bottom and Side
Walls
• Acoustically Engineered to Obtain Sound Pressure
Objectives
*Shown with Optional Accessories • Effective Noise Reduction for Limited Space
Applications
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 5
Engine Exhaust Silencers — Model “JI” Series
Industrial Grade
A B
A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
30
25
20
for “JI” Series Silencers
15 • Typical reduction = 12 – 18 dB
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 6
Engine Exhaust Silencers — Model “JR” Series
Residential Grade
A B A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
40
35
20 • Typical reduction = 18 – 25 dB
15 • Aluminized/carbon steel construction
10
• Stainless steel construction available
• Contact factory for custom fit applications
5
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 7
Engine Exhaust Silencers — Model “JC” Series
Critical Grade
A B
A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
45
40
35
Representative Attenuation Curve
ATTENUATION (dB)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 8
Engine Exhaust Silencers — Model “JH” Series
Hospital Grade
A B
A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
50
45
40
35 Representative Attenuation Curve
ATTENUATION (dB)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 9
Tandem — “LPC” Series
Critical Grade
D C
F
SECONDARY
A
PRIMARY
Part Number A B D H K L M WT
LPC-04-200279 4.0 12.0 40.0 10.0 6.0 38.0 130
LPC-05-200280 5.0 14.0 53.0 10.0 7.0 42.0 196
LPC-06-200281 6.0 16.0 53.0 11.0 7.5 50.0 254
LPC-08-200282 8.0 16.0 53.0 11.0 8.5 54.0 275
LPC-10-200283 10.0 20.0 67.0 13.0 10.0 66.0 540
LPC-12-200284 12.0 22.0 67.0 15.0 11.5 74.0 645
LPC-14-200285 14.0 26.0 68.0 17.0 13.0 86.0 1010
LPC-16-200286 16.0 28.0 81.0 18.0 14.0 94.0 1500
Note: Standard with 150 # ANSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal
and may vary slightly with production models.
60
Representative Attenuation Curve
50 for “LPC” Series Silencers
ATTENUATION (dB)
40 • Typical reduction = 37 – 43 dB
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 10
Tandem — “LPH” Series
Hospital Grade
D C
F
SECONDARY
A
PRIMARY
Part Number A B D H K L M WT
LPH-04-205101 4.0 12.0 52.0 10.0 6.0 38.0 168
LPH-05-205102 5.0 14.0 76.5 10.0 7.0 42.0 276
LPH-06-205103 6.0 16.0 65.0 11.0 7.5 50.0 315
LPH-08-205104 8.0 16.0 77.0 11.0 8.5 54.0 390
LPH-10-205105 10.0 20.0 90.0 13.0 10.0 66.0 720
LPH-12-205106 12.0 22.0 91.0 15.0 11.5 74.0 885
LPH-14-205107 14.0 26.0 104.0 17.0 13.0 86.0 1350
LPH-16-205108 16.0 28.0 129.0 18.0 14.0 94.0 2000
Note: Standard with 150 # ANSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal
and may vary slightly with production models.
60
40 • Typical reduction = 42 – 48 dB
30 • Internal thermal/acoustic insulation
• Low profile
20
• Aluminized/carbon steel construction
10 • Stainless steel construction available
• Contact factory for custom fit applications
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 11
Low Pressure Drop — “TAU” Series
Residential Grade
A B
A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
25
15 • Typical reduction = 12 – 15 dB
• Aluminized/carbon steel construction
10
• Stainless steel construction available
• Contact factory for custom fit applications
5
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 12
Low Pressure Drop — “TBU” Series
Critical Grade
A B
A B
E
Note: Standard with 150 # ANSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal
and may vary slightly with production models.
35
Representative Attenuation Curve
30 for “TBU” Series Silencers
25 • Typical reduction = 17 – 22 dB
ATTENUATION (dB)
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 13
Disk Silencers — “DCK2” Series
Critical Grade
L
H B
Part Number A B D H K L M WT
DCK2-04-200751 4 16.5 27 8 30.50 11 1.00 140
DCK2-05-200752 5 18.0 30 10 33.50 13 1.00 250
DCK2-06-200753 6 19.5 33 12 36.50 15 1.00 310
DCK2-08-200754 8 26.5 47 14 50.50 17 1.00 435
DCK2-10-200755 10 29.5 53 16 56.50 19 1.00 650
DCK2-12-200756 12 34.0 62 18 66.50 21 1.25 925
DCK2-14-200757 14 36.0 66 24 70.50 27 1.25 1090
DCK2-16-200758 16 40.0 74 26 78.50 29 1.25 1500
DCK2-18-200759 18 45.5 85 28 89.50 31 1.25 1890
Note: Standard with 150 # ANSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal
and may vary slightly with production models.
40
Representative Attenuation Curve
35 for “DCK2” Series Silencers
30
• Typical reduction = 22 – 36 dB
ATTENUATION (dB)
25
• Internal thermal/acoustic insulation
20
• Various inlet/outlet configuration and
15 orientations available
10 • Carbon steel construction
5 • Stainless steel construction available
0 • Contact factory for custom fit applications
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 14
Disk Silencers — “DHK” Series
Hospital Grade
L
H B
Part Number A B D H K L M WT
DHK-04-205349 4 20.5 35 8 38.5 11 1.00 200
DHK-05-205350 5 21.5 37 12 40.5 15 1.00 255
DHK-06-205351 6 23.0 40 12 43.5 15 1.00 310
DHK-08-205352 8 29.5 53 14 56.5 17 1.00 630
DHK-10-205353 10 32.5 59 16 62.5 19 1.00 855
DHK-12-205354 12 38.5 71 20 75.5 23 1.25 1245
DHK-14-205355 14 39.0 72 24 76.5 27 1.25 1300
DHK-16-205356 16 41.0 76 28 80.5 31 1.25 1590
DHK-18-205357 18 46.5 87 30 91.5 33 1.25 2045
Note: Standard with 150 # ANSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal
and may vary slightly with production models.
50 Representative Attenuation Curve
45 for “DHK” Series Silencers
40
35 • Typical reduction = 26 – 43 dB
ATTENUATION (dB)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 15
Disk Silencers - “DCP2” High Pressure Series
Critical Grade
L
H B
Part Number A B D H K L M WT
DCP2-04-90010563 4 16.5 27 8 30.5 11 1.00 140
DCP2-05-90010564 5 18.0 30 10 33.5 13 1.00 250
DCP2-06-90010565 6 19.5 33 12 36.5 15 1.00 310
DCP2-08-90010566 8 26.5 47 14 50.5 17 1.00 520
DCP2-10-90010567 10 29.5 53 16 56.5 19 1.00 750
DCP2-12-90010568 12 34.0 62 18 66.5 21 1.25 925
DCP2-14-90010569 14 36.0 66 24 70.5 27 1.25 1090
DCP2-16-90010570 16 40.0 74 26 78.5 29 1.25 1500
DCP2-18-90010571 18 45.5 85 28 89.5 31 1.25 1890
Note: Standard with 150 # ANSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal
and may vary slightly with production models.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 16
Disk Silencers - “DHP” High Pressure Series
Hospital Grade
L
H B
Part Number A B D H K L M WT
DHP-04-90010572 4 20.5 35 8 38.5 11 1.00 200
DHP-05-90010573 5 21.5 37 12 40.5 15 1.00 255
DHP-06-90010574 6 23.0 40 12 43.5 15 1.00 400
DHP-08-90010575 8 29.5 53 14 56.5 17 1.00 750
DHP-10-90010576 10 32.5 59 16 62.5 19 1.00 925
DHP-12-90010577 12 38.5 71 20 75.5 23 1.25 1245
DHP-14-90010578 14 39.0 72 24 76.5 27 1.25 1300
DHP-16-90010579 16 41.0 76 28 80.5 31 1.25 1590
DHP-18-90010580 18 46.5 87 30 91.5 33 1.25 2045
Note: Standard with 150 # ANSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal
and may vary slightly with production models.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 17
Spark Arrestors — “SSU” Series
Industrial Grade
A B
A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
30
20
• Typical reduction = 12 – 18 dB
15 • Aluminized/carbon steel construction
10 • Stainless steel construction available
• Contact factory for custom fit applications
5
• Type approval in accordance with
0 DNV-OS-D101 and EN 1834-1
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 18
Spark Arrestors — “SRU” Series
Residential Grade
A B
A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
40
25 • Typical reduction = 18 – 25 dB
20 • Aluminized/carbon steel construction
15 • Stainless steel construction available
10 • Contact factory for custom fit applications
5 • Type approval in accordance with
DNV-OS-D101 and EN 1834-1
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 19
Spark Arrestors — “SCU” Series
Critical Grade
A B
A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
50
45
40
Representative Attenuation Curve
for “SCU” Series Silencers
35
ATTENUATION (dB)
30 • Typical reduction = 25 – 32 dB
25 • Aluminized/carbon steel construction
20
• Stainless steel construction available
15
• Contact factory for custom fit applications
10
5 • Type approval in accordance with
0
DNV-OS-D101 and EN 1834-1
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 20
Spark Arrestors — “SHU” Series
Hospital Grade
A B A B
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
60
40 • Typical Reduction = 32 – 38 dB
30 • Aluminized/Carbon Steel Construction
• Stainless Steel Construction Available
20
• Contact Factory for Custom Fit Applications
10 • Type approval in accordance with
DNV-OS-D101 and EN 1834-1
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 21
ATEX Spark Arrester - “SSA” Series, Industrial Grade
EN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000
A B A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
30
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 22
ATEX Spark Arrester - “SRA” Series, Residential Grade
EN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000
D C
A B A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
40
35
Representative Attenuations Curve
30 for “SRA” Series Silencers
ATTENUATION (dB)
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 23
ATEX Spark Arrester - “SCA” Series, Critical Grade
EN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000
D C
A B A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
50
45
Representative Attenuations Curve
40 for “SCA” Series Silencers
35
ATTENUATION (dB)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 24
ATEX Spark Arrester - “SHA” Series, Hospital Grade
EN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000
A B A B
E
Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # ANSI drilled plate flange connections.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
60
0
63 125 250 500 1000 2000 4000 8000
OCTAVE BAND CENTER FREQUENCY (Hz)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 25
Spark Arrester
“SAU” Series, Industrial Grade
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 26
Disk Silencer - “DCS” Series - Spark Arresting
Critical Grade
H B D
NOM
DRAIN
PLUG
SPARK
CLEANOUT
M- 4H OLES
ON KB C
Part Number A B D H K L M WT
DCS-06-90012986 6 19.5 33 12 36.5 16 1.00 200
DCS-08-90012987 8 26.5 47 14 50.5 20 1.00 500
DCS-10-90012988 10 29.5 53 16 56.5 23 1.00 750
DCS-12-90012989 12 34.0 62 18 66.5 26 1.25 1090
DCS-14-90012990 14 36.0 66 24 70.5 34 1.25 1350
DCS-16-90012991 16 40.0 74 26 78.5 35 1.25 1500
DCS-18-90012992 18 45.5 85 28 89.5 38 1.25 1890
Note: On 14, 16, and 18 inch spark arresting disk silencers, the silencers must have dual inlets or the L dimension will need to be adjusted.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
Representative Attenuations Curve
40
for “DCS” Series Silencers
35
ATTENUATION (dB)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 27
Disk Silencer - “DHS” Series - Spark Arresting
Hospital Grade
H B D
NOM
DRAIN
PLUG
SPARK
CLEANOUT
M- 4H OLES
ON KB C
Part Number A B D H K L M WT
DHS-06-90012993 6 23.0 40 12 43.5 16 1.00 370
DHS-08-90012994 8 29.5 53 14 56.5 20 1.00 600
DHS-10-90012995 10 32.5 59 16 62.5 23 1.00 925
DHS-12-90012996 12 38.5 71 20 75.5 28 1.25 1350
DHS-14-90012997 14 39.0 72 24 76.5 34 1.25 1500
DHS-16-90012998 16 41.0 76 28 80.5 37 1.25 1850
DHS-18-90012999 18 46.5 87 30 91.5 40 1.25 2150
Note: On 14, 16, and 18 inch spark arresting disk silencers, the silencers must have dual inlets or the L dimension will need to be adjusted.
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.
Representative Attenuations Curve
50
45
for “DHS” Series Silencers
ATTENUATION (dB)
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 28
Accessories
Rainguards ~ Model RGF / Model RGS
Rainguard – Model RGF Series with ANSI Rainguard – Model RGS Series with Slip Fit
Flange Pattern I.D. Connection
Size Model No. Part No. B C Thick Size Model No. Part No. B C Thick
4.0 RGF-04 021729 13.0 4.0 .083 4.00 RGS-04 021737 13.0 4.0 .083
5.0 RGF-05 021730 14.0 4.0 .083 4.50 RGS-45 021738 13.0 4.0 .083
6.0 RGF-06 021731 15.0 4.0 .083 5.00 RGS-05 021739 14.0 4.0 .083
8.0 RGF-08 021732 17.5 4.0 .083 5.56 RGS-556 021740 14.0 4.0 .083
10.0 RGF-10 021733 20.0 4.0 .109 6.00 RGS-06 021741 15.0 4.0 .083
12.0 RGF-12 021734 23.0 4.0 .109 6.63 RGS-663 021742 15.0 4.0 .083
14.0 RGF-14 021735 25.0 4.0 . 109 8.00 RGS-08 021743 17.5 4.0 .083
16.0 RGF-16 021736 27.5 4.0 .109 8.63 RGS-863 021744 17.5 4.0 .083
10.00 RGS-10 021745 20.0 4.0 .109
10.75 RGS-1075 021746 20.0 4.0 .109
12.00 RGS-12 021747 23.0 4.0 .109
Standard Features 12.75 RGS-1275 021748 23.0 4.0 .109
• Special flanges available 14.00 RGS-14 021749 25.0 4.0 .109
• Stainless steel construction available 16.00 RGS-16 021750 27.5 4.0 .109
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 29
Accessories
Rain Caps ~ Model RCP / Model RCT
PIPE /
PIPE / TUB E
TUB E O.D.
O.D .
Pipe Rain Caps - Model RCP Tube Rain Caps - Model RCT
Standard Features
Model Part Size of Model Part Size of
• Pipe size rain caps No. No. Exhaust Pipe OD No. No. Exhaust Pipe OD
• Tube size rain caps
RCP-15 000636 1 7/8 RCT-15 00635 1 1/2
• Counter balanced for automatic
RCP-02 000637 2 3/8 RCT-02 000636 2
operation
• Heavy duty construction RCP-25 000638 2 7/8 RCT-25 000637 2 1/2
• 1.5 inch to 6 inch size zinc plated RCP-03 000639 3 1/2 RCT-03 000638 3
• 8 inch and larger with 1200° satin RCP-35 000640 4 RCT-35 000639 3 1/2
black finish RCP-04 000641 4 1/2 RCT-04 000640 4
• Reduced noise style RCP-05 000649 5 1/2 RCT-05 000642 5
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 30
Accessories
90° Short Radius Tube Elbow
RADIUS
LENGTH
LENGTH
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 31
Accessories 90° Short Radius Tube Elbow
With Flange One End
RADIUS
DIAMETER
DIAMETER
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 32
Accessories Outlet Extension
Straight Tube-ANSI Flange Both Ends
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 33
Accessories Flanges - Model PFL
125/150# ANSI Drilled Steel Welding Plate Flanges
HOLES :
NUMBER AND SIZE
A C B
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 34
Accessories Flanges - Model TFL
125/150# ANSI Drilled Steel Welding Plate Flanges
HOLES :
NUMBER AND SIZE
A C B
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 35
Accessories Flanges - Model REFL
Steel Welding Single Reducing Plate Flanges
HOLES :
NUMBER AND SIZE
A C B
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 36
Accessories Flanges - Model DREFL
Steel Welding Double Reducing Plate Flanges
HOLES :
NUMBER AND SIZE
A C B
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 37
Accessories Flanges - Model FLT
Cast Iron Screwed Flanges
HOLES :
NUMBER AND SIZE
NOM .
PIPE O.D.
SIZE B.C.D.
D1
D2
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 38
Accessories
Special Flanges - Caterpillar - Model CAFL
HOLES :
HOLES : NUMBER AND SIZE
NUMBER AND SIZE
A C B
C A B
|D|
Style 1 Style 2
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 39
Accessories - Special Flanges
Detroit Diesel - Model DFL, Mitsubishi - Model MIT
HOLES :
NUMBER AND SIZE
A C B
|D|
Detroit Diesel
Size Part I.D.-A O.D.-B C D Hole No. of Weight
Number Bolt Center Diameter Holes
8.0 DFL-08 8.13 11.00 9.88 0.50 0.50 8 6
10.0 DFL-10 10.06 13.00 11.88 0.50 0.56 8 8
6.0 150138 0.06 9.50 8.19 0.50 0.43 6 6
10.0 150147 10.88 14.4 13.19 0.50 0.71 12 10
Mitsubishi
Size Part I.D.-A O.D.-B C D Hole No. of Weight
Number Bolt Center Diameter Holes
8.0 MIT-08 8.00 12.50 11.02 .50 .88 8 10
10.0 MIT-10 10.00 15.16 13.58 .50 .88 12 14
12 MIT-12 12.00 16.93 15.35 .50 .88 12 15
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 40
Accessories
Special Flanges - Cummins - Model CUFL
HOLES :
NUMBER AND SIZE
A C B
|D|
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 41
Accessories Model RMB - Round Mounting Bands
Model OMB – Oval Mounting Bands
BODY DIA.
E
E
D
C M F
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 42
Accessories Flange Accessories
Ring Gaskets, Gasket Kits
Bolts/Nuts/Gasket Bolts/Nuts/Gasket
Ring Gasket Weld On Flange Threaded Flange
Size Model No. Part No. Size Model No. Part No. Size Model No. Part No.
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Gasket Specifications
-Temperature rating of 1000ºC / 1832ºF
-0.008" ETP (electrolytic tin plate) steel core laminated with ceramic fibers
-Material thickness of 0.0625"
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 43
Accessories Special Flange Accessories
Ring Gaskets, Gasket Kits/Caterpillar, Cummins, Detroit Diesel
Size Model No. Part No. Size Model No. Part No.
Size Model No. Part No. Size Model No. Part No.
Size Model No. Part No. Size Model No. Part No.
* Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/Accessories/Flange Kits
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 44
Flex Connectors
Male NPT/Male NPT & Male NPT/Slotted Cuff
A B
A B
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may
vary slightly with production models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 45
Flex Connectors
20° Lip Flange/Male NPT & Slotted Cuff/Slotted Cuff
A B
20 °
A B
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may
vary slightly with production models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 46
Flex Connectors
Flange/Flange & Flange/Male NPT
Flange/Flange C
A B
Flange/Male NPT C
A B
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may
vary slightly with production models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 47
Flex Connectors
Flange/Slotted Cuff & Flange/Female NPT
Flange/Slotted Cuff
C
A B
Flange/Female NPT C
A B
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may
vary slightly with production models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 48
Flex Connectors
Flange/20° Lip Flange & Flange/Flanged 90° Elbow
A B
20 °
A
D
B
Size Model No. Part No. A B C D
3 FL03-18ELF 060340 3.0 3.0 18 6
3.5 FL35-18ELF 060341 3.5 3.5 18 8
4 FL04-18ELF 060342 4.0 4.0 18 8
5 FL05-18ELF 060343 5.0 5.0 18 10
6 FL06-18ELF 060344 6.0 6.0 18 10
8 FL08-18ELF 060345 8.0 8.0 18 8
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may
vary slightly with production models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 49
Flex Connectors
Male NPT/Flanged 90° Elbow & Female NPT/Flanged 90° Elbow
A
D
A
D
B
Size Model No. Part No. A B C D
3 FC03-18ELF 060360 3.0 3.0 18 6
3.5 FC35-18ELF 060361 3.5 3.5 18 8
4 FC04-18ELF 060362 4.0 4.0 18 8
5 FC05-18ELF 060363 5.0 5.0 18 10
6 FC06-18ELF 060364 6.0 6.0 18 10
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may
vary slightly with production models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 50
Accessories
Mounting Supports Type A & B Mounting Legs
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 51
Accessories
Mounting Supports Type D - Shell Lug Supports - Vertical
B – Body
Diameter M K W
10 5/8 13 1/4 2
12 5/8 15 1/4 2
14 5/8 17 1/4 2
16 5/8 19 3/8 2
18 5/8 21 3/8 2
20 5/8 23 3/8 2 1/2
22 5/8 25 3/8 2 1/2
24 5/8 27 3/8 2 1/2
26 5/8 30 5/8 2 1/2
28 5/8 32 5/8 2 1/2
30 7/8 34 5/8 3 1/2
32 7/8 36 5/8 3 1/2
34 7/8 38 5/8 3 1/2
36 7/8 40 5/8 3 1/2
42 7/8 46 5/8 3 1/2
48 7/8 52 7/8 3 1/2
54 1 1/8 59 3/4 4
60 1 1/8 65 3/4 4
66 1 1/8 71 3/4 4
72 1 1/8 77 3/4 4
84 1 1/8 89 3/4 6
96 1 1/8 101 3/4 6
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 52
Accessories
Mounting Supports Type E - Shell Lug Supports - Horizontal
B – Body
Diameter M K W
10 1/2 13 1/4 2
12 1/2 15 1/4 2
14 1/2 17 1/4 2
16 1/2 19 3/8 2
18 1/2 21 3/8 2
20 5/8 23 3/8 2 1/2
22 5/8 25 3/8 2 1/2
24 5/8 27 3/8 2 1/2
26 5/8 30 5/8 2 1/2
28 5/8 32 5/8 2 1/2
30 7/8 34 5/8 3 1/2
32 7/8 36 5/8 3 1/2
34 7/8 38 5/8 3 1/2
36 7/8 40 5/8 3/12
42 7/8 46 5/8 3 1/2
48 7/8 52 7/8 3 1/2
54 1 1/8 59 3/4 4
60 1 1/8 65 3/4 4
66 1 1/8 71 3/4 4
72 1 1/8 77 3/4 4
84 1 1/8 89 3/4 6
96 1 1/8 101 3/4 6
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 53
Accessories
Mounting Supports Type F - Saddle Supports - Horizontal
B – Body
Diameter M K W Q
10 1/2 5 2 1/2 7
12 1/2 6 2 1/2 8
14 1/2 7 2 1/2 9
16 1/2 8 2 1/2 10
18 1/2 9 2 1/2 10.5
20 1/2 10 2 1/2 11.5
22 5/8 11 2 1/2 12.5
24 5/8 12 2 1/2 14.5
26 5/8 13 2 1/2 15.5
28 5/8 14 2 1/2 17
30 5/8 15 2 1/2 18
32 5/8 16 3 1/2 19
34 7/8 17 3 1/2 19.5
36 7/8 18 3 1/2 20.5
42 1 1/8 21 3 1/2 24
48 1 1/8 24 3 1/2 28
54 1 1/8 27 3 1/2 30.5
60 1 1/8 30 3 1/2 33
66 1 1/8 33 3 1/2 36
72 1 1/8 36 3 1/2 39
84 1 1/8 42 6 44
96 1 1/8 48 6 49.5
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 54
Accessories
Sure-Seal Clamps
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 55
Accessories
Explosion Relief Cover
4-6 6 5/8 11 3
8 - 12 12 3/4 19 3
14 - 22 16 23 1/2 4
24 -42 20 27 1/2 4
Standard Features
• Designed for 5 - 10 psi operating pressure
D
• Spring loaded safety relief cover
• Must be located in silencers first chamber opposite the inlet
A
Dimensions in inches, weights in pounds. Dimensions and
weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 56
Accessories
Inspection Ports
Inspection Openings
Inspection Ports
Silencer Diameter Size A x B Weight
12 - 18 3x4 4 1/2
20 - 30 4x6 6
32 - 54 6x8 11
60 and larger 11 x 15 * 56
B
Standard Features
• Handholes include the elliptical ring, cover, gasket,yoke, bolt
and nut
• Standard carbon steel construction
• Standard with Blue Max™ high heat gaskets
Optional Features
• Stainless steel construction
• Special gasket material
A
Dimensions in inches, weights in pounds. Dimensions and
weights are nominal and may vary slightly with production models.
Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 57
Accessories
Wall Thimbles
IPS Dimension Size Model No./ Weight Size Model No./ Weight
Pipe Size A B C Part No. Part No.
3 4.5 16 20 3 WTC-03-060370 35 3 WTS-03-060380 35
4 6 18 22 4 WTC-04-060371 40 4 WTS-04-060381 40
5 7 18 22 5 WTC-05-060372 62.5 5 WTS-05-060382 62.5
6 8 20 24 6 WTC-06-060373 82 6 WTS-06-060383 83
8 10 22 26 8 WTC-08-060374 121 8 WTS-08-060384 122
10 12 24 28 10 WTC-10-060375 124 10 WTS-10-060385 125
12 14 26 30 12 WTC-12-060376 143 12 WTS-12-060386 144
14 16 26 30 14 WTC-14-060377 157 14 WTS-14-060387 158
16 18 28 32 16 WTC-16-060378 175 16 WTS-16-060388 176
18 WTC-18-060379 200 18 WTS-18-060389 200
20 WTC-20-060380 225 20 WTS-20-060390 225
Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production
models. Request certified drawings for exact dimensions.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 58
WYE Connectors - Cummins
VTA 28 G5
WYE Part Gen Set Overall Outlet
Size Spread Inlet Type
Number Model Height Type
32.40 30.50
WYE-020102 450 DFGA 5x5x8 12.69” 32.4” / 30.5” CUFL-05 8” ANSI
18.00
WYE-020102 500 DFGA 5x5x8 12.69” 32.4” / 30.5” CUFL-05 8” ANSI
WYE-020102 600 DFGB 5x5x8 12.69” 32.4” / 30.5” CUFL-05 8” ANSI
WYE-023577 600 DFGB 5 x 5 x10 12.69” 32.4” / 30.5” CUFL-05 8” ANSI
12.68
QST 30 G1 & G2
WYE Part Gen Set Overall Outlet
Size Spread Inlet Type
Number Model Height Type
30.00 WYE-023578 620 DFHA 6x6x8 12.81” 30” CUFL-06 8” ANSI
16.88
WYE-020631 620 DFHA 6 x 6 x 10 12.81” 30” CUFL-06 10” ANSI
WYE-020631 750 DFHA 6 x 6 x 10 12.81” 30” CUFL-06 10” ANSI
WYE-020631 700 DFHB 6 x 6 x 10 12.81” 30” CUFL-06 10” ANSI
WYE-020631 800 DFHB 6 x 6 x 10 12.81” 30” CUFL-06 10” ANSI
12.81
13.94
KTA 50 G2
WYE Part Gen Set Overall Outlet
18.00 Size Spread Inlet Type
35.00 Number Model Height Type
WYE-023580 1100 DFLB 8 x 8 x 12 76.93” 35" CUFL-06 12” ANSI
WYE-021051 1100 DFLB 8 x 8 x 14 76.93” 35” CUFL-06 14” ANSI
76.93
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 59
WYE Connectors - Cummins
KTA 50 G3 & G4
WYE Part Gen Set Overall Outlet
Size Spread Inlet Type
Number Model Height Type
38.00 37.04 WYE-022654 1120 DFLC 6 x 6 x 12 17.28” 38” / 37.04” CUFL-06 12” ANSI
WYE-022654 1250 DFLC 6 x 6 x 12 17.28” 38” / 37.04” CUFL-06 12” ANSI
18.00
WYE-022654 1200 DFLD 6 x 6 x 12 17.28” 38” / 37.04” CUFL-06 12” ANSI
WYE-023581 1200 DFLD 6 x 6 x 14 17.28” 38” / 37.04” CUFL-06 14" ANSI
17.28
KTTA 50 G2
WYE Part Gen Set Overall Outlet
Size Spread Inlet Type
Number Model Height Type
50.54 18.00
WYE-020016 1280 DFMB 8 x 8 x 12 70.52" 50.54" 8" ANSI 12" ANSI
WYE-020016 1500 DFMB 8 x 8 x 12 70.52" 50.54" 8" ANSI 12" ANSI
WYE-023582 1500 DFMB 8 x 8 x 14 70.52" 50.54" 8" ANSI 14" ANSI
70.52
QSK 60
WYE Part Gen Set Overall
Size Spread Inlet Type Outlet Type
Number Model Height
WYE-023583 1600 Kw 10 x 10 x 14 56.25" 36" 10" ANSI 14" ANSI
WYE-022875 1600 Kw 10 x 10 x 16 56.25" 36" 10" ANSI 16" ANSI
18.00
36.00
WYE-022609 1600 Kw 10 x 10 x 18 56.25" 36" 10" ANSI 18" ANSI
WYE-023583 1800 Kw 10 x 10 x 14 56.25" 36" 10" ANSI 14" ANSI
WYE-022875 1800 Kw 10 x 10 x 16 56.25" 36" 10" ANSI 16" ANSI
WYE-022609 1800 Kw 10 x 10 x 18 56.25" 36" 10" ANSI 18" ANSI
56.27 WYE-023584 1800 Kw 10 x 10 x 20 56.25" 36" 10" ANSI 20" ANSI
WYE-022875 2000 Kw 10 x 10 x 16 56.25" 36" 10" ANSI 16" ANSI
WYE-022609 2000 Kw 10 x 10 x 18 56.25" 36" 10" ANSI 18" ANSI
WYE-023584 2000 Kw 10 x 10 x 20 56.25" 36" 10" ANSI 20" ANSI
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 60
WYE Connectors - Caterpillar
3508 B
WYE Part Overall Outlet
KW Rating Size Spread Inlet Type
Number Height Type
31.25 18.00
WYE-021449 910 Kw 6 x 6 x 10 20.54" 31.25" CAFL-06 10" ANSI
WYE-021449 1000 Kw 6 x 6 x 10 20.54" 31.25" CAFL-06 10" ANSI
WYE-023585 910 Kw 6 x 6 x 12 20.54" 31.25" CAFL-06 12" ANSI
20.54
WYE-023585 1000 Kw 6 x 6 x 12 20.54" 31.25" CAFL-06 12" ANSI
3512 B
WYE Part Overall Outlet
KW Rating Size Spread Inlet Type
Number Height Type
WYE-021508 1275 Kw 8 x 8 x 14 20.65" 39" CAFL-08 14" ANSI
WYE-021508 1360 Kw 8 x 8 x 14 20.65" 39" CAFL-08 14" ANSI
39.00
WYE-023586 1360 Kw 8 x 8 x 16 20.65" 39" CAFL-08 16" ANSI
18.00 WYE-021508 1400 Kw 8 x 8 x 14 20.65" 39" CAFL-08 14" ANSI
WYE-023586 1400 Kw 8 x 8 x 16 20.65" 39" CAFL-08 16" ANSI
WYE-023587 1500 Kw 10 x 10 x 14 20.65" 39" CAFL-08 14" ANSI
20.65
WYE-023588 1500 Kw 10 x 10 x 16 20.65" 39" CAFL-08 16" ANSI
3516 B
WYE Part Overall Outlet
KW Rating Size Spread Inlet Type
Number Height Type
WYE-022351 1640 Kw 8 x 8 x 12 20.5" 39" CAFL-08 12" ANSI
39.00 WYE-023555 1640 Kw 8 x 8 x 16 20.5" 39" CAFL-08 16" ANSI
WYE-020216 1640 Kw 10 x 10 x 16 20.5" 39" CAFL-08 16" ANSI
18.00 WYE-020164 1640 Kw 8 x 8 x 18 20.5" 39" CAFL-08 18" ANSI
WYE-022485 1640 Kw 10 x 10 x 18 20.5" 39" CAFL-08 18" ANSI
WYE-020216 1825 Kw 10 x 10 x 16 20.5" 39" CAFL-08 16" ANSI
20.50
WYE-022485 1825 Kw 10 x 10 x 18 20.5" 39" CAFL-08 18" ANSI
WYE-020216 2000 Kw 10 x 10 x 16 20.5" 39" CAFL-08 16" ANSI
WYE-022485 2000 Kw 10 x 10 x 18 20.5" 39" CAFL-08 18" ANSI
WYE-021462 2000 Kw 12 x 12 x 18 20.5" 39" CAFL-08 18" ANSI
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 61
WYE Connectors - Detroit Diesel
8V-92TTA
WYE Part Overall Outlet
KW Rating Size Spread Inlet Type
Number Height Type
30.26 18.00
WYE-023593 400 Kw 5 x 5 x 10 46.06" 32" 5" Flare 10" ANSI
WYE-023596 400 Kw 5 x 5 x 12 46.06" 32" 5" Flare 12" ANSI
WYE-023595 400 Kw 6x6x8 46.06" 32" 6" Flare 8" ANSI
46.50 WYE-023594 400 Kw 6 x 6 x 10 46.06" 32" 6" Flare 10" ANSI
8V-92TTA
WYE Part Overall Outlet
KW Rating Size Spread Inlet Type
18.00 Number Height Type
WYE-023598 400 Kw 5 x 5 x 10 38.92" 35" 5" Turbo 10" ANSI
35.00 WYE-023597 400 Kw 5 x 5 x 12 38.92" 35" 5" Turbo 12" ANSI
WYE-020127 400 Kw 6x6x8 38.92" 35" 6" Turbo 8" ANSI
WYE-023599 400 Kw 6 x 6 x 10 38.92" 35" 6" Turbo 10" ANSI
38.92
12V-71TA
WYE Part Outlet
KW Rating Size Spread Overall Height Inlet Type
Number Type
18.00 WYE-023600 450 Kw 5 x 5 x 12 45.69" 36.44" / 35.75" 5" Turbo 12" ANSI
36.44 35.75 WYE-023378 450 Kw 6 x 6 x 10 45.69" 36.44" / 35.75" 6" Turbo 10" ANSI
WYE-023601 450 Kw 6 x 6 x 12 45.69" 36.44" / 35.75" 6" Turbo 12" ANSI
6.64
44.69 7.84
12V-92TA
WYE Part Outlet
KW Rating Size Spread Overall Height Inlet Type
Number Type
WYE-023602 500 Kw 5 x 5 x 12 32.3" 19.44" / 19" 5" Turbo 12" ANSI
12.00 WYE-023604 500 Kw 6 x 6 x 10 32.3" 19.44" / 19" 6" Turbo 10" ANSI
19.44 19.00 WYE-023603 500 Kw 6 x 6 x 12 32.3" 19.44" / 19" 6" Turbo 12" ANSI
WYE-023602 600 Kw 5 x 5 x 12 32.3" 19.44" / 19" 5" Turbo 12" ANSI
WYE-023605 600 Kw 5 x 5 x 14 32.3" 19.44" / 19" 5" Turbo 14" ANSI
32.30
WYE-023603 600 Kw 6 x 6 x 12 32.3" 19.44" / 19" 6" Turbo 12" ANSI
WYE-023606 600 Kw 6 x 6 x 14 32.3" 19.44" / 19" 6" Turbo 14" ANSI
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 62
WYE Connectors - Detroit Diesel
16V-92TA
18.00 WYE Part Overall Outlet
KW Rating Size Spread Inlet Type
27.88 27.50 Number Height Type
WYE-023612 750 Kw 6 x 6 x 14 32.75" 27.88" / 27.5" 6" Turbo 14" ANSI
WYE-023613 750 Kw 8 x 8 x 12 32.75" 27.88" / 27.5" 8" Turbo 12" ANSI
32.75
WYE-020554 750 Kw 8 x 8 x 14 32.75" 27.88" / 27.5" 8" Turbo 14" ANSI
16V-149TIB
WYE Part Overall Outlet
34.50 18.00 KW Rating Size Spread Inlet Type
Number Height Type
WYE-023617 1500 Kw 10 x 10 x 16 46" 34.5" 10" ANSI 16" ANSI
WYE-023619 1500 Kw 10 x 10 x 18 46" 34.5" 10" ANSI 18" ANSI
46.00
WYE-023617 1600 Kw 10 x 10 x 16 46" 34.5" 10" ANSI 16" ANSI
WYE-023619 1600 Kw 10 x 10 x 18 46" 34.5" 10" ANSI 18" ANSI
24V-71T
WYE Part Overall Outlet
KW Rating Size Spread Inlet Type
36.00 18.00 Number Height Type
WYE-023620 10 x 10 x 14 51.55" 36" 10" ANSI 14" ANSI
WYE-021466 10 x 10 x 16 51.55" 36" 10" ANSI 16" ANSI
51.55
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 63
WYE Connectors - Detroit Diesel
8V-2000
18.00
WYE Part Gen Set Overall Outlet
29.65 Size Spread Inlet Type
31.00 Number Model Height Type
WYE-023621 450 / 500 5x5x8 33" 29.65" / 31" 5" Flare 8" ANSI
WYE-023622 450 / 500 5 x 5 x 10 33" 29.65" / 31" 5" Flare 10" ANSI
WYE-023623 450 / 500 5 x 5 x 12 33" 29.65" / 31" 5" Flare 12" ANSI
33.00
12V-2000
18.00 WYE Part Gen Set Overall Outlet
Size Spread Inlet Type
Number Model Height Type
31.00 30.84
WYE-023624 600 / 750 5x5x8 34.19" 30.84" / 31" 5" Flare 8" ANSI
WYE-023625 600 / 750 5 x 5 x 10 34.19" 30.84" / 31" 5" Flare 10" ANSI
WYE-023626 600 / 750 5 x 5 x 12 34.19" 30.84" / 31" 5" Flare 12" ANSI
34.19
16V-2000
18.00 WYE Part Gen Set Overall Outlet
Size Spread Inlet Type
Number Model Height Type
31.00
WYE-023627 800 ROZD 6x6x8 34.94" 31" 6" Flare 8" ANSI
WYE-023628 800 ROZD 6 x 6 x 10 34.94" 31" 6" Flare 10" ANSI
WYE-023629 800 ROZD 6 x 6 x 12 34.94" 31" 6" Flare 12" ANSI
WYE-023630 800 ROZD 6 x 6 x 14 34.94" 31" 6" Flare 14" ANSI
34.19
12V-4000
WYE Part Overall Outlet
Gen Set Model Size Spread Inlet Type
34.75 Number Height Type
WYE-023631 1250 - 1500 Kw 10 x 10 x 12 18.5" 34.75" 10" ANSI 12" ANSI
18.00
WYE-021055 1250 - 1500 Kw 10 x 10 x 14 18.5" 34.75" 10" ANSI 14" ANSI
18.50
16V-4000
WYE Part Gen Set Overall Outlet
12.02 Size Spread Inlet Type
Number Model Height Type
26.00
WYE-023632 2000 Kw 10 x 10 x 14 37" 26" 10" ANSI 14" ANSI
WYE-021054 2000 Kw 10 x 10 x 16 37" 26" 10" ANSI 16" ANSI
WYE-023633 2000 Kw 10 x 10 x 18 37" 26" 10" ANSI 18" ANSI
37.00
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 64
Limited Warranty Guarantee
Phillips & Temro Industries products are guaranteed for one year from date of
purchase by the consumer against defects due to materials and the Company’s
workmanship only, as either and both of which the Company shall be the sole judge.
The sole obligation hereunder shall be to repair, or at the Company’s option to replace
products as aforesaid, provided same are returned “Transportation Prepaid” to the
Company’s nearest plant within the said period.
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 65
Notes
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 66
Notes
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 67
Customer Profile / Sizing a Silencer
Company ____________________________________________________________________
Address _____________________________________________________________________
Please complete and fax to 952-3440-3400 or contact your local Sales Representative
5. Silenced Noise Criteria & Applicable Distance from Silencer to Which Criteria Applies _____________________________________________
Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com
Page 68