Professional Documents
Culture Documents
771, 772, 773 Series Servovalves
771, 772, 773 Series Servovalves
771, 772, 773 Series Servovalves
Servovalves
771/2/3 SERIES
TWO STAGE SERVOVALVES
771/2/3 SERIES SERVOVALVES a cantilever spring.The valve deflection of the armature/flap- Once the restoring torque
design is simple and rugged for per assembly within the flexure becomes equal to the torque
The 771/2/3 Series flow con-
dependable, long life operation. tube. Deflection of the flapper from the magnetic forces, the
trol servovalves are throttle
These valves are suitable restricts fluid flow through one armature/flapper assembly
valves for 3- and preferably
for electrohydraulic position, nozzle which is carried through moves back to the neutral
4-way applications.They are a
speed, pressure or force con- to one spool end, displacing position and the spool is held
high performance, two-stage
trol systems with high dynamic the spool. open in a state of equilibrium
design that covers the range of
response requirements. Movement of the spool until the command signal
rated flows from 1 to 15 gpm
opens the supply pressure port changes to a new level.
at 1000 psi valve drop.The
(P) to one control port, while In summary, the spool
output stage is a closed center, An electrical command signal simultaneously opening the position is proportional to the
Principle of operation
four-way sliding spool.The pilot (flow rate set point) is applied tank port (T) to the other input current and with con-
stage is a symmetrical double- to the torque motor coils, and control port.The spool motion stant pressure drop across the
nozzle and flapper, driven by creates a magnetic force which also applies a force to the valve, flow to the load is pro-
a double air gap, dry torque acts on the ends of the pilot cantilever spring, creating a portional to the spool position.
motor. Mechanical feedback of stage armature.This causes a restoring torque on the
spool position is provided by
armature/flapper assembly.
VALVE FEATURES
➣ Low friction double nozzle pilot stage ➣ High resolution, low hysteresis
This catalog is for users with technical system are given, the user has to check the Intrinsically safe valve versions are available for use in hazardous locations.
knowledge.To ensure that all necessary suitability of the products described here. Specific models are certified to FM,ATEX, CSA, and TIIS standards. Contact the factory
characteristics for function and safety of the In case of doubt, please contact Moog Inc. for details.
2
771/2/3 SERIES
GENERAL TECHNICAL DATA
Operating Pressure
40.0
ports P,T,A and B up to 3,000 psi
2.0
Recommended Cleanliness Class
For normal operation ISO 4406 < 14/11
For longer life ISO 4406 < 13/10 gpm
2.5
Filter Rating recommended
For normal operation ß10 ≥ 75 (10 µm absolute) 1.0
For longer life ß5 ≥ 75 (5 µm absolute)
Any position, fixed or moveable.
gpm
Installation Operations
Vibration 30 g, 3 axes 1.0
Weight 2.0 lb [.09 kg]
EN50529P: class IP65, with .05
200 300 400 500 700 1000 2000 3000
Degree of Protection
mating connector mounted.
Valve Pressure Drop ∆p (psi)
Delivered with an oil sealed
shipping plate.
Shipping Plate
P B T A
View from Pressure Side
3
771/2/3 SERIES
TECHNICAL DATA
0 0 0
10 20 30 50 70 100 200 300 500 1000 10 20 30 50 70 100 200 300 500 1000 10 20 30 50 70 100 200 300 500 1000
Frequency (Hz) Frequency (Hz) Frequency (Hz)
Frequency Response Frequency Response Frequency Response
of 1, 2.5, and 5 gpm Servovalves of 10 gpm Servovalves of 15 gpm Servovalves
4
771/2/3 SERIES
INSTALLATION DRAWINGS
1.88 1.88
[47.8] [47.8] 4X .221 [5.61] THRU
.014 M
2.550
1.12 MAX [64.77] OR
[28.4] 4X .265 [6.73] THRU
(OPTION) 1.275 .007 M
[32.39]
1.39 MAX
1.06
[35.3] [26.9]
1.343
[34.11]
1.00
[25.4]
.671
.844 [17.04]
[21.44]
1.688
[42.88]
2.81
[71.4]
2.18
[55.4] 1.75
1.56 [44.5]
1.03 [39.6] MTG HGT
[26.2]
P
1.25
4 HOLES (42.9) A PORT CIRCLE mounted requires a 32 [∆∆]
CONTROL PORT B .844
(21.4)
finish, flat within 0.002[0.05] TIR.
2X .62
CONTROL PORT A
.672
1.295 with clockwise rotation of null
3.25 2.590
1.344 (17.1) adjust screw (3/32 hex key).
(34.1)
1.63
.500
Flow bias is continually varied
For External Null Adjust:
adjust is rotated.
B PORT DIA VALVE MOUNTS ON
THIS MANIFOLD SURFACE
.010 M .390
4 HOLES .156 .20
1.545 .026 M
4X PORT PER SAE J1926
.750-16UNF-2B DASH 8
STR THD O-RING BOSS
PRESSURE PORT P
4X .344 THRU
.531 .48 PRESSURE
2X .62
.013 M
1.88
3.75
A variety of coils are available nector (that mates with an to input current, therefore,
coil resistance
Note: Before applying electrical signals the pilot stage has to be pressurized.
TABLE 1
* Measured at 50 Hz
6
771/2/3 SERIES
ORDERING INFORMATION
SPARE PARTS AND ACCESSORIES
7
Australia Mulgrave
Brazil São Paulo
China Hong Kong
Shanghai
Denmark Cöpenhagen
England Tewkesbury
Finland Espoo
France Rungis
Germany Böblingen
India Bangalore
Ireland Ringaskiddy
Italy Brescia
Malnate
Japan Hiratsuka
Korea Seoul
Luxembourg Luxembourg City
Philippines Baguio
Singapore Singapore
Spain Orio
Sweden Askim
USA East Aurora