Professional Documents
Culture Documents
1st Quarter Examination Carpentry 7&8
1st Quarter Examination Carpentry 7&8
1st Quarter Examination Carpentry 7&8
Directions: Select the best answer from the choices given. Write your answer on the space provided before the
number.
_________6. The price of one (1) hammer that Kate’s father just bought is 200 pesos.
_________10. Angeles Family is very good at setting aside things from the others.
What is this practice that the family has been good at?
a. Label b. Mensuration c. Segregation d. Inventory
_________ 11. Which hand tool would you pick if you were asked to find and get a measuring tool?
a. Marking Gauge b. Pull-push Rule c. Chalk Line d. Pencil
_________12. Which hand tool is NOT a testing tool?
a. Try Square b. Steel Square c. Spoke Shave d. Plumb Bob
_________13. Which will complete this group of hand tools: Chisel, Plane, Cabinet Scraper, and ____?
a. Try Square b. Steel Square c. Spoke Shave d. Plumb Bob
_________14.What PPE Personal Protective Equipment will you use to prevent the inhalation of sprayed paint
fumes?
a. Face Mask b. Apron c. Ear Protector d. Gloves
_________15. How does a folded measuring tool look like?
A B C D
_________16. Which measuring tool would you pick if you were to get the measurement of a diameter?
A B C D
_________17. The students in their MAPEH class wanted to draw perfect circles for their color wheel art
project.
A B C D
_________18. Which guidelines should NOT be included in handling measuring instruments and tools?
a. Do not use the caliper as tongs
b. Do not wipe measuring tools/instruments before returning them to the storage room.
c. Do not wipe off edges of the steel tape of pull-push rule with bare hands to avoid injury.
d. Do not pull the steel tape of pull-push rule too much to avoid the coil spring from damage.
_________19. What is the measurement if one foot is converted to metric system?
a. 20.54 cm b. 30.48 cm c. 42.12 cm d. 51.26 cm
_________20. What is the measurement of A Board Foot?
a. It is one square foot of lumber of one inch thick
b. It is two square foot of lumber of one inch thick
c. It is three square foot of lumber of one inch thick
d. It is four square foot of lumber of one inch thick
_________21.What is the numerator of the fraction 2/5?
a. 5 b. 2 c. 0.4 d. 5.2
_________22.How will you arrange the steps in your sketch in order not to consume much time if you were to
prepare an isometric drawing of a giver orthographic figure?
1. study the object drawn
2. sketch the top view and side view
3. lay out the front view
4. finalize the object to complete the drawing
5. draw the isometric drawing
a. 12345 b. 15324 c. 23154 d. 15243
_________23.Which would you determine if you were to draw the lift and right axis of isometric box?
a. Length of the box b. width of the box
c. height of the box d. size of the box
_________24. A carpenter will make a table. He wants to know the dimension and specification of the
table he is going to make.
What should he look into in order to have a guide for this job?
a. Bill of Materials b. Bill of Quantities c. Standard Specification d. Drawing
_________25. You are asked to make a center table. In the working drawing with its parts and
specification, you found 1 piece 25mm x 600 x 800 mm plywood/ply board.
_________26. The drawing of the center table plan indicates a distance of 800 mm from one leg to the
other on the long rail side.
_________29.This sign is important especially during emergency situations. It shall be lettered in legible red
letters, not less than 6 inches high, on a white field and the principal stroke of the letters shall be
at least three-fourth in width.
_________30. Which signs shall be used as temporary means of warning of an existing hazard?
a. Safety instruction signs c. Warning signs
b. Accident prevention tags d. Caution signs
_________31. What will you use to get the details on the amount of materials of the project?
a. Quantity b. Materials and Description c. Unit Price d. Requisition Unit
_________32. Which material refers to sawn timber?
a. Lumber b. gravel c. plywood d. wood
_________33. Marco is a construction worker. His specialization is in roof framing and large furniture.
_________34. Rico is repairing their house using lumber. He noticed that the pieces of lumber need to
be held together.
Which holding tool will he use so that pieces will be held together while his working on it?
a. Bench Vise b. C – clamp c. Bar Clamp d. Auger bit
_________35. Berto is a sculptor. He wants to shape the wood with the image of Mother Theresa.
_________39. Mang Ramon is a school carpenter. He is in charge of the maintenance of school structures.
The administration asked him to measure the floor area of one of the classrooms in school.
What measuring tool should Mang Ramon use for the task given to him?
a. caliper b. meter stick c. pull-push rule d. zig-zag rule
_________40. Which is the indication of SEITON?
a. an action to clean your workplace thoroughly
b. an action to put every necessary items in good order
c. a condition where all members practice accordingly.
d. an action to identify and eliminate all unnecessary items from your workplace
_________41. Mr. Cruz bought a wood with the following dimension 4x 2 x 12.
How many board feet would Mr. Cruz buy if he will compute the number of board feet using
the formula T x W x L?
a. 8 board feet c. 6 board feet
b. 10 board feet d. 9 board feet
_________42. How much will you pay if you want to buy 15 board feet of wood at P20.00 per board foot?
a. P500.00 b. P300.00 c. P200.00 d. P150.00
_________43. In your workplace, after a period of two months, you found out that there are items which are
not needed from your work.
_________46. Isao is instructed to construct a bulletin board. He needs to prepare the list of things needed for
the project with its description, sizes, and amount.
_________48. Miko wanted to acquire carpentry tools. He went to the store to buy one.
How would he choose among the display tools the one that he is going to buy?
a. He will look for the biggest tool and buy it.
b. He will buy according to the money available.
c. He will a tool which is suitable to what he needs.
d. He will buy tools which are expensive to assure good quality.
_________49. How many feet are there in 4 yards if 1 yard is equivalent to 3 feet?
a. 15 feet b. 12 feet c. 18 feet d. 10 feet
_________50. Which practice manifests best practice in a workplace?
a. Make a list of things with location and put it in a locker or cabinet
b. Indicate the names of the persons responsible for the work area and for the machines
c. Discover and identify items which are unnecessary to your work and dispose unnecessary items
d. Do not wait until things get dirty. Clean the workplace, including machine equipment regularly so
that they do not have chance to get dirty