CERTIFICATE OF CONFORMANCE Cleveland, Ohio 44117-1199 (APPLIES ONLY TO U.S. PRODUCTS)
Product: Murex® 7024 [1Year]
Classification: E7024 Specification: AWS A5.1:2012, ASME SFA-5.1 Date January 07, 2015 This is to certify that the product named above and supplied on the referenced order number is of the same classification, manufacturing process, and material requirements as the material which was used for the test that was concluded on the date shown, the results of which are shown below. All tests required by the specifications shown for classification were performed at that time and the material tested met all requirements. It was manufactured and supplied according to the Quality System Program of the Lincoln Electric Company, Cleveland, Ohio, U.S.A., which meets the requirements of ISO9001, NCA3800, AWS A5.01, and other specification and Military requirements, as applicable. The Quality System Program has been approved by ASME, ABS, and VdTUV. E7024 Operating Settings Requirements RESULTS Electrode Size 321 5/321inch 5/322inch 3/163inch 3/164inch Polarity AC DC- AC DC- Plate Thickness, mm (in) 19 (3/4) 19 (3/4) 19 (3/4) 19 (3/4) Current, A 210 210 270 270 Pass/Layers 16/7 14/7 16/8 16/8 Preheat Temperature, °C (°F) (225 min.) 120 (250) 120 (250) 120 (250) 120 (250) Interpass Temperature, °C (°F) (225 - 350) 175 (350) 175 (350) 175 (350) 175 (350) Postweld Heat Treatment As-welded As-welded As-welded As-welded As-welded Mechanical properties of weld deposits Tensile Strength, MPa (ksi) (70 min.) 580 (85) 570 (83) 560 (82) 580 (84) Yield Strength, 0.2% Offset, MPa (ksi) (58 min.) 510 (74) 490 (70) 490 (70) 500 (72) Elongation % 17 min. 26 23 25 23 Average Hardness, HRB Not Required 90 90 89 89
Chemical composition of weld deposits (weight %)
C 0.15 max. 0.06 0.06 0.06 0.05 Mn 1.25 max. 0.83 0.87 0.92 0.80 Si 0.90 max. 0.44 0.51 0.38 0.32 S 0.035 max. 0.006 0.006 0.004 0.004 P 0.035 max. 0.020 0.020 0.016 0.016 Cr 0.20 max. 0.03 0.03 0.03 0.03 Ni 0.30 max. 0.02 0.02 0.02 0.02 Mo 0.30 max. 0.01 0.01 0.01 0.01 V 0.08 max. 0.02 0.02 0.02 0.02 B Not Required 0.000 0.000 0.000 0.000 Mn+Ni+Cr+Mo+V 1.50 max. 0.91 0.96 1.00 0.88
Page 1 of 2 Cert. No. 71900
The Lincoln Electric Company 22801 St. Clair Avenue CERTIFICATE OF CONFORMANCE Cleveland, Ohio 44117-1199 (APPLIES ONLY TO U.S. PRODUCTS)
Product: Murex® 7024 [1Year]
Classification: E7024 Specification: AWS A5.1:2012, ASME SFA-5.1 Date January 07, 2015
1. This certificate complies with the requirements of EN 10204, Type 2.2.
2. The electrode sizes required to be tested for this classification are 5/32 inch and 3/16 inch. January 07, 2015 3. Test assembly constructed of ASTM A36 steel. Toronto Cunningham, Certification Supervisor Date 4. Fillet Weld Test (positions as required): Met requirements. 5. Radiographic Inspection: Grade 2 - Met requirements. 6. The strength and elongation properties reported here were obtained from tensile specimens artificially aged at 105°C (220°F) for January 09, 2015 48 hours. Dave Fink, Manager, Compliance Date 7. Results below the detection limits of the instrument or lower than the precision required by the specification are reported as zero. Engineering, Consumable R&D Strength values in SI units are reported to the nearest 10 MPa converted from actual data. Preheat and interpass temperature values in SI units are reported to the nearest 5 degrees.