Professional Documents
Culture Documents
PC200 200lc-8mo Zessp208m0ep-01 PDF
PC200 200lc-8mo Zessp208m0ep-01 PDF
PC200 200lc-8mo Zessp208m0ep-01 PDF
200
PC200-8M0 HORSEPOWER
PC200LC-8M0
Gross: 110 kW 147 HP / 2000 min-1
Net: 103 kW 138 HP / 2000 min-1
OPERATING WEIGHT
PC200-8M0: 19800 – 20500 kg
PC200LC-8M0: 20700 – 21700 kg
BUCKET CAPACITY
0.50 – 1.20 m3
2
HYDR AULIC EXCAVATOR PC200/200LC-8M0
PC200-8M0 PC200LC-8M0
HORSEPOWER Gross: 110 kW 147 HP / 2000 min 110 kW 147 HP / 2000 min-1
-1
3
ECOLOGY & ECONOMY
Fuel consumption
7% reduced
Vs. PC200-8 Electronic control
Based on typical work pattern collected via KOMTRAX. unit for engine Main pump
Fuel consumption varies depending on job conditions. Two pump independent control
Engine
Heavy duty High Pressure
Common Rail (HPCR) system
Komatsu Technology
4
HYDR AULIC EXCAVATOR PC200/200LC-8M0
Komatsu SAA6D107E-1 reduced The PC200-8M0 excavator is equipped with six working
NOx emission by 29% modes (P, E, L, B, ATT/P and ATT/E mode). Each mode is
compared with the designed to match engine speed and pump output to the
PC200-7. This engine application. This provides the flexibility to match equipment
is U.S. EPA Tier 3 and performance to the job at hand.
EU Stage 3A emis- Working Mode Application Advantage
sions equivalent. • Maximum production/power
P Power mode
• Fast cycle times
• Good cycle times
E Economy mode • Better fuel economy
• Adjustable in 4 stages
• Suitable attachment speed
L Lifting mode • Lifting capacity is increased 7%
Low Operation Noise by raising hydraulic pressure.
• Optimum engine rpm,
B Breaker mode
Enables a low noise operation using the low-noise engine and hydraulic flow
methods to cut noise at source. • Optimum engine rpm,
Attachment
ATT/P hydraulic flow, 2way
Power mode
Low-noise muffler • Power mode
• Optimum engine rpm,
Optimal arrangement Attachment
ATT/E hydraulic flow, 2way
of sound absorbing Economy mode
• Economy mode
materials
P
Work priority
P mode
E
Fuel priority
E mode
ECO gauge
5
COMFOR T
Rubber
Spring
Pressurized Cab
Silicon
oil
6
HYDR AULIC EXCAVATOR PC200/200LC-8M0
SAFETY
The machine is equipped with a ROPS cab that conforms to Locks the hydraulic pres-
ISO 12117-2 for excavators as standard equipment. The ROPS sure to prevent uninten-
cab has high shock-absorption performance, featuring excellent tional movement. Neutral
durability and impact strength. It also satisfies the requirements start function allows
of OPG top guard level 1 (ISO 10262) for falling objects. Com- machine to be started
bined with the retractable seat belt, The ROPS cab protects the only in lock position.
operator in case of tipping over and against falling objects.
The operator can view the rear of the machine with a color
monitor screen.
Slip-resistant
Plates
Thermal and
Highly durable slip- Fan Guards
resistant plates main-
Thermal and fan guards
tain superior traction
are placed around
performance for the
high-temperature parts
long term.
of the engine and fan
drive.
7
ICT & KOMTRAX
1 2 3 Indicators
Function
switches 1 Auto-decelerator 5 Hydraulic oil temperature gauge
Basic 4 5 6 2 Working mode 6 Fuel gauge
operation
switches 3 Travel speed 7 ECO gauge
4 Engine water 8 Fuel consumption gauge
temperature gauge
9 Function switches menu
A/C operation
switches Basic operation switches
(Optional) 1 Auto-decelerator 4 Buzzer cancel
2 Working mode selector 5 Wiper
3 Traveling selector 6 Windshield washer
The main screen displays advices for promoting energy- Monitor function
saving operations as needed. The operator can use the ECO Controller monitors engine
guidance menu to check the operation records, ECO guid- oil level, coolant tempera-
ance records, average fuel consumption logs, etc. ture, battery charge air clog-
ging, etc. If the controller
finds any abnormality, it is
displayed on the LCD.
Maintenance function
The monitor informs replace-
ment time of oil and filters on
ECO guidance ECO guidance menu the LCD when the replace-
ment interval is reached.
Operation records
8
HYDR AULIC EXCAVATOR PC200/200LC-8M0
Energy-saving
Operation Support Report
KOMTRAX can provide various useful in-
formation which includes the energy-saving
operation support report created based on
the operating information of your machine
Location such as fuel consumption and idle time.
&
Operation map
Image
9
MAINTENANCE
10
HYDR AULIC EXCAVATOR PC200/200LC-8M0
RELIABILITY
Boom and arms are constructed of thick plates of high tensile strength steel. In addition, these structures are designed with
large cross-sectional areas and generous use of castings. The result is working attachments that exhibit long term durability and
high resistance to bending and torsional stress.
PC200-8M0 uses grease sealed tracks for extended under- PC200-8M0 uses strengthened track links, providing superb
carriage life. weight distribution and extend durability.
Grease
11
SPECIAL SPECS.
Stop valve
Operating pedal
Specifications
Spec/ Model PC200-8M0 PC200LC-8M0
SLF Type 15 m 15 m 18 m
12
HYDR AULIC EXCAVATOR PC200/200LC-8M0
Specifications
Spec/ Model PC200-8M0
Forestry Guard Cab:cab window, side cover (both side), battery case, deck guard, HD undercover and boom cylinder
Under Carriage Reinforced track frame, double flange carrier roller, 3-track roller guards (each side), track frame undercover
Track Shoe 800 mm shoe width and track link with snap ring 800 mm shoe width and track link (with snap ring: optional)
ATTACHMENT
Hydraulic Breaker Hydraulic Quick Coupler
The hydraulic breaker is an attachment tool used for crush- All kinds of attachment can be mounted
ing rock beds and paved surfaces, demolishing con- quickly without modification.
crete structures, etc. The large gas chamber, ideal c Lifting eye capacity: 12000 kg
gas pressure ratio, and long-stroke piston c Weight: 295 kg
deliver a powerful impact force. Since
the breaker unit does not require an
accumulator, the number of parts
has been reduced, resulting in
lower maintenance costs.
13
STANDARD & OPTIONAL EQUIPMENT
PC200-8M0 PC200LC-8M0
◎ : Standard equipment
○ : Optional equipment ATT Super Swing Super
STD Forestry ATT
- : Not available Piping Long STD Long
Front Yarder
(Logging) Piping Front
5700 mm Strengthened boom ◎ - - - - ◎ - -
5700 mm Strengthened boom with 1 additional piping - ◎ - - - - ◎ -
8600 mm Super long front boom (for 15m SLF) - - ◎ - - - - ◎
Boom
10300 mm Super long front boom (for 18m SLF) - - - - - - - ○
5700 mm Swing yarder boom, strengthened - - - ◎ - - - -
5700 mm Logging boom, strengthened - - - - ◎ - - -
2925 mm Strengthened arm assembly ◎ - - - - ◎ - -
2410 mm Arm assembly ○ - - - - ○ - -
1840 mm Arm assembly ○ - - - - ○ - -
2925 mm Strengthened arm assembly with 1-additional piping - ◎ - - - - ◎ -
Arm 2410 mm Strengthened arm assembly with 1-additional piping - ○ - - - - ○ -
6400 mm Super long front arm assembly (for 15m SLF) - - ◎ - - - - ◎
8200 mm Super long front arm assembly (for 18m SLF) - - - - - - - ○
2925 mm Swing yarder arm assembly ,strengthened - - - ◎ - - - -
2925 mm Forestry arm assembly, strengthened - - - - ◎ - - -
0.80 m3 Bucket ○ ○ - - - ○ ○ -
0.93 m3 Bucket ○ ○ - - - ○ ○ -
1.05 m3 Bucket ○ ○ - - - ○ ○ -
Bucket
0.45 m3 Bucket for super long front - - ◎ - - - - ◎
0.29 m3 Bucket for super long front - - - - - - - ○
0.80 m3 Forestry bucket - - - ◎ ◎ - - -
Bucket hook Bucket hook ○ ○ ○ - - ○ ○ ○
800 mm Triple grouser ◎ ◎ ◎ - ◎ ◎ ◎ ◎
700 mm Triple grouser ○ ○ ○ - - ○ ○ ○
Shoe
600 mm Triple grouser ○ ○ ○ - - ○ ○ ○
800 mm Triple grouser with snap ring - - - ◎ ○ - - -
Standard counterweight, 3.7 ton ◎ ◎ - ◎ ◎ ◎ ◎ -
Counterweight Heavy counterweight, 5.1 ton - - ◎ - - - - ◎
Heavy counterweight, 7.5 ton - - - - - - - ○
Cooler ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎
Cooler
Auto air conditioner ○ ○ ○ - - ○ ○ ○
Seat, rigid type ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎
Seat
Seat, suspension ○ ○ ○ - - ○ ○ ○
Cab front full guard level 1 (ISO 10262) ○ ○ ○ - - ○ ○ ○
Cab OPG top guard level 2 (ISO 10262) ○ ○ ○ - - ○ ○ ○
Rear view camera system ○ ○ ○ - - ○ ○ ○
CAB Beacon lamp ○ ○ ○ - - ○ ○ ○
Anti-theft guard for monitor and pump controller ○ ○ ○ - - ○ ○ ○
Sun visor ○ ○ ○ - - ○ ○ ○
Sun roller blind ○ ○ ○ - - ○ ○ ○
2-Working light, additional on boom cylinder ○ ○ ○ - - ○ ○ ○
Air pre cleaner, engine ○ ○ ○ - - ○ ○ ○
Fuel refill pump ○ ○ ○ - - ○ ○ ○
Others
Track frame under cover ○ ○ ○ ◎ ◎ ○ ○ ○
One service valve ○ - - - - ○ - -
Arm holding valve ○ ○ - ○ ○ ○ ○ -
1-Attachment piping spec - ◎ - - - - ◎ -
Special spec Swing yarder spec - - - ◎ - - - -
Forestry spec (Logging) - - - - ◎ - - -
Standard and optional equipment may vary by country. Please consult your Komatsu dealer for details.
14
HYDR AULIC EXCAVATOR PC200/200LC-8M0
Optional Equipment
• Cab front full height guard • OPG top guard level 2 • Rain visor • Air pre-cleaner
level 1 (ISO 10262) (ISO 10262)
15
KOMATSU BRAND BUCKET
Me Bucket
• Low resistant excavation • High fuel efficiency
• High productivity
Conventional Me Bucket
Bucket Line-up
Tooth
Bucket Capacity (m3) Bucket Width (mm) Boom + Arm (m)
Type
Number of
Weight
Tooth
Category Bucket Type Image
Horizontal
(kg)
Vertical
Without With
SAE, PCSA CECE 5.7+1.8 5.7+2.4 5.7+2.9 8.6+6.4 10.3+8.2
Side Cutter Side Cutter
GP
GP Conventional
: General purpose use, density up to 1.8 t/m3 : General purpose use, density up to 1.5 t/m3
: Light duty work, density up to 1.2 t/m3 : Light duty work, density up to 0.9 t/m3 : Not usable 3: Selectable
16
HYDR AULIC EXCAVATOR PC200/200LC-8M0
SPECIFICATIONS
17
P A
Q
E C
O
F
G M I N
K J
D,L B
dimensions
PC200-8M0 PC200LC-8M0 H
working range
D
C E
G
F
18
HYDR AULIC EXCAVATOR PC200/200LC-8M0
PC200-8M0 Arm: 1840 mm Bucket: 0.8 m3 SAE J 296 heaped Shoe: 600 mm triple grouser
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *5100 kg *5100 kg *5600 kg *5600 kg
6.0 m *4800 kg 3600 kg *5550 kg 3950 kg *5800 kg *5800 kg
4.5 m 4400 kg 2850 kg 5850 kg 3800 kg *7350 kg 6150 kg *10350 kg *10350 kg
3.0 m 3900 kg 2500 kg 3850 kg 2450 kg 5600 kg 3600 kg 9000 kg 5650 kg
1.5 m 3750 kg 2350 kg 3750 kg 2350 kg 5400 kg 3400 kg 8550 kg 5200 kg
Om 3900 kg 2400 kg 3700 kg 2300 kg 5250 kg 3250 kg 8350 kg 5050 kg
–1.5 m 4400 kg 2750 kg 5200 kg 3250 kg 8350 kg 5050 kg *9500 kg *9500 kg
–3.0 m 5750 kg 3600 kg 5350 kg 3350 kg 8500 kg 5200 kg *13000 kg 10300 kg
PC200-8M0 Arm: 2410 mm Bucket: 0.8 m3 SAE J 296 heaped Shoe: 600 mm triple grouser
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *4500 kg 4250 kg
6.0 m *4250 kg 3000 kg *4850 kg 4050 kg
4.5 m 3800 kg 2450 kg 4000 kg 2600 kg *5450 kg 3900 kg *6400 kg 6300 kg
3.0 m 3450 kg 2150 kg 3900 kg 2500 kg 5650 kg 3650 kg *8650 kg 5800 kg
1.5 m 3300 kg 2050 kg 3750 kg 2350 kg 5450 kg 3450 kg 8650 kg 5300 kg
Om 3400 kg 2100 kg 3700 kg 2300 kg 5250 kg 3250 kg 8350 kg 5050 kg *7000 kg *7000 kg
–1.5 m 3750 kg 2350 kg 3650 kg 2250 kg 5200 kg 3200 kg 8300 kg 5000 kg *9300 kg *9300 kg *7700 kg *7700 kg
–3.0 m 4650 kg 2900 kg 5250 kg 3250 kg 8400 kg 5100 kg *14600 kg 10200 kg
–4.5 m *7150 kg 4500 kg *8300 kg 5350 kg *11650 kg 10400 kg
PC200-8M0 Arm: 2925 mm Bucket: 0.8 m3 SAE J 296 heaped Shoe: 600 mm triple grouser
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *2900 kg *2900 kg *4050 kg *4050 kg
6.0 m *2750 kg 2600 kg *3100 kg 2600 kg *4250 kg 4100 kg
4.5 m *2750 kg 2150 kg 4000 kg 2550 kg *4850 kg 3900 kg *5500 kg *5500 kg
3.0 m *2900 kg 1900 kg 3850 kg 2450 kg 5650 kg 3650 kg *7700 kg 5850 kg *11600 kg 11450 kg
1.5 m 2950 kg 1800 kg 3700 kg 2300 kg 5400 kg 3400 kg 8700 kg 5300 kg *6800 kg *6800 kg
Om 3000 kg 1800 kg 3600 kg 2200 kg 5150 kg 3200 kg 8300 kg 4950 kg *5150 kg *5150 kg
–1.5 m 3300 kg 2000 kg 3550 kg 2150 kg 5050 kg 3050 kg 8100 kg 4850 kg *9300 kg *9300 kg *5150 kg *5150 kg
–3.0 m 3950 kg 2400 kg 5050 kg 3100 kg 8200 kg 4900 kg *14800 kg 9850 kg *9700 kg *9700 kg
–4.5 m 5700 kg 3500 kg 8400 kg 5100 kg *12950 kg 10200 kg
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
19
lifting capacity WITH LIFTING MODE
PC200LC-8M0 Arm: 1840 mm Bucket: 0.8 m3 SAE J 296 heaped Shoe: 700 mm triple grouser
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *5100 kg *5100 kg *5600 kg *5600 kg
6.0 m *4800 kg 4150 kg *5550 kg 4550 kg *5800 kg *5800 kg
4.5 m *4900 kg 3300 kg 4750 kg 2900 kg *6000 kg 4400 kg *7350 kg 7050 kg *10350 kg *10350 kg
3.0 m 4850 kg 2900 kg 4650 kg 2800 kg 6900 kg 4200 kg *9700 kg 6550 kg
1.5 m 4650 kg 2800 kg 4600 kg 2750 kg 6700 kg 4000 kg *10700 kg 6100 kg
Om 4850 kg 2850 kg 6550 kg 3850 kg 10600 kg 5950 kg
–1.5 m 5450 kg 3250 kg 6500 kg 3800 kg *10600 kg 5950 kg *9500 kg *9500 kg
–3.0 m 7150 kg 4200 kg 6650 kg 3950 kg *9750 kg 6100 kg *13000 kg 12250 kg
PC200LC-8M0 Arm: 2410 mm Bucket: 0.8 m3 SAE J 296 heaped Shoe: 700 mm triple grouser
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *4500 kg *4500 kg
6.0 m *4250 kg 3500 kg *4850 kg 4650 kg
4.5 m *4300 kg 2850 kg 4900 kg 3000 kg *5450 kg 4500 kg *6400 kg *6400 kg
3.0 m 4250 kg 2550 kg 4800 kg 2900 kg *6400 kg 4200 kg *8650 kg 6750 kg
1.5 m 4100 kg 2450 kg 4700 kg 2800 kg 6750 kg 4000 kg *10550 kg 6250 kg
Om 4250 kg 2500 kg 4600 kg 2700 kg 6550 kg 3850 kg 10650 kg 5950 kg *7000 kg *7000 kg
–1.5 m 4700 kg 2750 kg 4550 kg 2700 kg 6500 kg 3800 kg 10550 kg 5900 kg *9300 kg *9300 kg *7700 kg *7700 kg
–3.0 m 5800 kg 3400 kg 6550 kg 3850 kg *10350 kg 6000 kg *14600 kg 12200 kg
–4.5 m *7150 kg 5250 kg *8300 kg 6250 kg *11650 kg *11650 kg
PC200LC-8M0 Arm: 2925 mm Bucket: 0.8 m3 SAE J 296 heaped Shoe: 700 mm triple grouser
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *2900 kg *2900 kg *4050 kg *4050 kg
6.0 m *2750 kg *2750 kg *3100 kg 3050 kg *4250 kg *4250 kg
4.5 m *2750 kg 2550 kg *4600 kg 3000 kg *4850 kg 4500 kg *5500 kg *5500 kg
3.0 m *2900 kg 2250 kg 4800 kg 2850 kg *5900 kg 4200 kg *7700 kg 6800 kg *11600 kg *11600 kg
1.5 m *3200 kg 2150 kg 4600 kg 2750 kg 6700 kg 3950 kg *9800 kg 6250 kg *6800 kg *6800 kg
Om *3700 kg 2200 kg 4500 kg 2600 kg 6500 kg 3750 kg 10550 kg 5850 kg *5150 kg *5150 kg
–1.5 m 4150 kg 2400 kg 4450 kg 2550 kg 6350 kg 3650 kg 10400 kg 5750 kg *9300 kg *9300 kg *5150 kg *5150 kg
–3.0 m 4950 kg 2900 kg 6350 kg 3650 kg *10400 kg 5800 kg *14800 kg 11800 kg *9700 kg *9700 kg
–4.5 m *6700 kg 4100 kg *9100 kg 6000 kg *12950 kg *12000 kg
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.