Professional Documents
Culture Documents
Rockwell Eth Media
Rockwell Eth Media
Ethernet Media
Bulletin Numbers 1585, 1585A, 1585BP, 1585BT, 1585BX, 1585BZ, 1585D, 1585J
Topic Page
Summary of Changes 2
Introduction 2
Cable Spools 3
Unshielded Twisted Pair 3
Shielded Twisted Pair (Foil and Braided Shield) 4
600V Ethernet Cable 5
Cordsets and Patchcords 6
RJ45 6
RJ45 Gigabit 7
RJ45 Red 8
M12 Flex-rated 9
M12 Receptacle Flex-rated 11
M12 X-code Flex-rated Gigabit 12
M12 Red 13
Patchcords and Field Attachable 14
Die-cast Zinc RJ45 Connector, Variant 1 14
Thermoplastic RJ45 Connector, Variant 1 16
Field Attachable 18
RJ45 Connector 18
M12 Insulation Displacement Connectors (IDC) 20
M12 to RJ45 Bulkhead Connector 22
Ethernet Media
Summary of Changes
This publication contains new and updated information as indicated in the following table.
Topic Page
Added Introduction 2
Updated RJ45 connector operating temperature 18
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource Description
Industrial Ethernet Media Brochure, Publication 1585-BR001 Provides an overview of Ethernet Media products offered by Rockwell Automation.
Introduction
As Ethernet is increasingly used in industrial control, survival of physical media in rugged or harsh environments is
becoming a necessity. The high speed of network protocol allows it to be used in applications where other networks fall
short. EtherNet/IP™ uses both standard Ethernet and TCP/IP technologies and an open application layer protocol
called the Control and Information Protocol (CIP). This application layer is the same as used in DeviceNet™ and
ControlNet™ networks.
Rockwell Automation Cat 5e Ethernet cables are designed to supply a more reliable network connection in harsh
surroundings. By optimizing the balance of twisted-pair conductors inside a robust Thermoplastic Elastomer (TPE)
jacket, data is protected from noise, chemicals, and mechanical issues to M3I3C3E3 environmental protection levels. The
cable is available in RJ45 patchcords for IP20 applications or in four-pin D-coded M12 patchcords for IP67 applications
where high vibration, fluids, and other contaminants can threaten the reliability of a network.
M12 D-code field attachable insulation displacement connectors (IDC) are available in both shielded and unshielded
housings with male or female connectors. Male eight-pin RJ45 connectors are available in both a crimp termination and
a toolless IDC connector for custom cabling.
Rockwell Automation M12 to RJ45 bulkhead connectors provide an elegant transition for network architecture from an
IP20 setting to an IP67 environment. The adapter can be used to connect remote junction boxes or implement an
On-Machine™ solution with Armor™ I/O products.
The Rockwell Automation Ethernet media portfolio provides more reliable connectivity to maintain network integrity
and helps prevent costly downtime from troubleshooting.
Cable Spools
Unshielded Twisted Pair
Features
Specifications
Two-Pair Four-Pair
White/Orange White/Orange
White/Green Orange
Orange White/Green
Green Blue
White/Blue
Green
White/Brown
Brown
Specifications
Two-Pair Four-Pair
White/Orange White/Orange
White/Green Orange
Orange White/Green
Green Blue
White/Blue
Green
White/Brown
Brown
Specifications
14.2
View (0.56)
Shown Ref
with Cap
12 87
PC
13.9
87
(0.55)
Ref
12
B
White/Orange 51.2 13.8
(2.02) (0.054)
Orange Ref Ref
6.6
White/Green (0.26)
Ref
Blue
White/Blue
Green
View
White/Brown Shown
without Cap
Brown
11.68
Pinout (0.46)
Ref
Face View RJ45 Pinout Figure 2 - RJ45 90° Left and Right Angle Patchcord
8-Pin 32 (1
.25)
.25)
.4) 32 (1
36 (1
.4)
36 (1
Color Code 8 7 6 5 4 3 2 1
Features
Specifications
Pinout
Color Code 8 7 6 5 4 3 2 1
8-Pin 4-Pin
1 White/Orange TxData + 1 White/Orange TxData +
2 Orange TxData - 2 Orange TxData -
3 White/Green Recv Data + 3 White/Green Recv Data +
A 4 Blue Unused 4 N/A —
5 White/Blue Unused 5 N/A —
6 Green Recv Data - 6 Green Recv Data -
7 White/Brown Unused 7 N/A —
8 Brown Unused 8 N/A —
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 4 - Cordsets/Patchcords
RJ45 Gigabit
Features
Specifications Pinout
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 5 - Cordsets/Patchcords
RJ45 Red
Specifications
RJ45 Red Cordset
Pinout
Color Code 8 7 6 5 4 3 2 1
8-Pin 4-Pin
1 White/Orange TxData + 1 White/Orange TxData +
2 Orange TxData - 2 Orange TxData -
3 White/Green Recv Data + 3 White/Green Recv Data +
A 4 Blue Unused 4 N/A —
5 White/Blue Unused 5 N/A —
6 Green Recv Data - 6 Green Recv Data -
7 White/Brown Unused 7 N/A —
8 Brown Unused 8 N/A —
Approximate Dimensions
M12 Flex-rated
Features
4-Pin M12
• Over molded housing suitable for IP67 applications and harsh industrial environments where D-Code Cordset
extreme vibration, shock, chemicals, and temperature are found.
• Flex-rated cable (must be tied down and not flexed within 6 in. of the connector).
• Custom termination of single-ended cordsets with one of several field attachable connectors.
• Designed to ODVA EtherNet/IP specifications and ISO IEC 24702, IEC 61918.
• Twisted pairs maintain signal balance through cable to provide high noise immunity and return loss.
• Suitable for noise environments M3I3C3E3.
General Specifications
Cable Specifications
Cable Style Cable Type Wire Size [AWG] Cable O.D. [mm (in.)] Cable Rating
4 conductor, unshielded twisted Weld splatter, sunlight, and oil resistant; UL
TPE, high flex, unshielded 24 5.6(0.22)
pair (UTP), teal CM, CMX; cUL CM; TIA 568B
PUR, foil and braided shield, high flex, 4 conductor, shielded twisted 26 5.84 (0.23) C(ETL)US TYPE CMX; TIA 568B
halogen free pair (STP), teal
4 conductor, shielded twisted (UL) CMX, CMR; c(UL) CMG; (UL) PLTC or
PVC, 600V rated, foil shield 22 8.13 (0.32)
pair (STP), teal AWM 2570 80C 600V; TIA 568B
Pinout
Face View Pinout Face View RJ45 Pinout Face View RJ45 Pinout
4-Pin 8-Pin
1 2 2 1
4 4
Color Code 3 3 8 7 6 5 4 3 2 1
8-Pin 4-Pin
1 White/Orange TxData + 1 White/Orange TxData +
2 Orange TxData - 2 Orange TxData -
1 White-Orange 3 Orange 3 White/Green Recv Data + 3 White/Green Recv Data +
A 4 Blue Unused 4 N/A —
2 White-Green 4 Green
5 White/Blue Unused 5 N/A —
6 Green Recv Data - 6 Green Recv Data -
7 White/Brown Unused 7 N/A —
8 Brown Unused 8 N/A —
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 7 - Cordsets/Patchcords
47 (1.85)
Specifications
Pinout
4
Color Code 3 8 7 6 5 4 3 2 1
1 White/Orange TxData +
2 Orange TxData -
1 White/Orange 3 White/Green Recv Data +
2 White/Green 4 Blue Unused
A
3 Orange 5 White/Blue Unused
4 Green 6 Green Recv Data -
7 White/Brown Unused
8 Brown Unused
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 8 - Cordsets/Patchcords
39 (1.54) Length 44.2 (1.74)
(see table)
19.5 (0.77) 19.5 (0.77)
M12 7.5
28 2 8 12 9
1.5 (0.06) (0.29)
(1.1) (0.08) (0.31) (0.47) (0.35)
Dia. Dia.
5.5 (0.22)
Dia.
20/SW18 M12 x 1
Dia.
PG9
x
x
G 2
Dia. M12 RJ45
PIN PIN 1
2
1 1 3
2 3 6
3 2
18 (0.71) 4 6
Dia.
G
SW17
Features
• Over-molded housing suitable for IP67 applications and harsh industrial environments where
extreme vibration, shock, chemicals, and temperature are found.
• Flex-rated cable (must be tied down and not flexed within 6 in. of the connector). 8-Pin M12 X-code Cordset, Cat 6
• Designed to EtherNet/IP specifications and ISO IEC 11801, IEC 61918.
• Twisted pairs maintain signal balance through cable to provide high noise immunity and low return loss.
• Suitable for noise environments M3I3C3E3.
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 9 - Cordsets/Patchcords
50 (1.97)
M12 Red
Specifications
4-Pin M12 D-Code Cordset
Attributes Bulletin 1585D
Coupling Nut Material Nickel-plated brass
Housing Material Polyurethane (PUR)
Contact Material Gold-plated brass
Cable Diameter 5.84 mm (0.23 in.)
Enclosure Type Rating IP67
Bend Radius 10 x cable diameter
Pinout
Face View Pinout Face View RJ45 Pinout Face View RJ45 Pinout
4-Pin 8-Pin
1 2 2 1
4 4
Color Code 3 3 8 7 6 5 4 3 2 1
8-Pin 4-Pin
1 White/Orange TxData + 1 White/Orange TxData +
2 Orange TxData - 2 Orange TxData -
1 White-Orange 3 Orange 3 White/Green Recv Data + 3 White/Green Recv Data +
A 4 Blue Unused 4 N/A —
2 White-Green 4 Green
5 White/Blue Unused 5 N/A —
6 Green Recv Data - 6 Green Recv Data -
7 White/Brown Unused 7 N/A —
8 Brown Unused 8 N/A —
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 10 - Cordsets/Patchcords
47 (1.85)
Specifications
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 11 - Die-cast Zinc RJ45 Connector, Variant 1 Dimensions
1-White/Orange
2-Orange
3-White/Green
4-Blue
5-White/Blue
6-Green
7-White/Brown
8-Brown
152.4 (6.0)
60.1 (2.37)
30 (1.18)
30
(1.18) Dia.
20
(0.79) Dia.
30.4
(1.2) Dia.
20.1
(0.79)
20.1 (0.79)
24.6 30.4
(1.0) Dia. (1.2)
30.0 30.4
(1.18) 47.3 (1.9) (1.2)
24.6 3.0
(1.0) Dia. (1.2)
30.0 3.0
(1.18) (1.2)
Specifications
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 15 - Thermoplastic RJ45 Connector, Variant 1 Dimensions
1-White/Orange
2-Orange
3-White/Green
4-Blue
5-White/Blue
6-Green
7-White/Brown
8-Brown
152.4 (6.0)
60.1 (2.37)
30 (1.18)
30
(1.18) Dia.
20
(0.79) Dia.
Acceptable Cable
32.4 4.0…8.0
30.1 (1.28) (0.157…0.315) dia.
(1.19) dia.
UTP 21.1
Symbol (0.83)
33.9 (1.33) 53.7 (2.11)
24.6
(0.97)
33 13 17
(1.3) dia. (0.51) (0.67)
33 (1.3)
30
(1.18) Thread
1-1/16 x 18 UNF
35.8
(1.41)
11.1 Max.
3.1 (0.44) Panel
(0.12) Thickness
44.4 (1.75)
Field Attachable
RJ45 Connector
Features
Specifications
Pinout
Color Code 8 7 6 5 4 3 2 1
8-Pin 4-Pin
1 White/Orange TxData + 1 White/Orange TxData +
2 Orange TxData - 2 Orange TxData -
3 White/Green Recv Data + 3 White/Green Recv Data +
A 4 Blue Unused 4 N/A Unused
5 White/Blue Unused 5 N/A Unused
6 Green Recv Data - 6 Green Recv Data -
7 White/Brown Unused 7 N/A Unused
8 Brown Unused 8 N/A Unused
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 19 - RJ45 Insulation Displacement Connector (IDC)
12.9 11.6
(0.50) (0.46)
9.4
6.6
14.6 (0.26) (0.37)
(0.57)
51.3 (2.02)
35.7
(1.4)
11.68 13.5
(0.46) (0.53)
22.55 (0.89)
8.18 12.32
(0.32) (0.48)
7.47 6.60 7.92
4.38 (0.17) (0.31) 9.71
(0.29) (0.26) (0.38) 8.6
(0.64)
6.10 (0.24)
6.5 (0.26)
Features
• Field installable with no hand tools needed
• Straight male or female shielded versions
• Allows easy modification of existing cable installations
Field Attachable
• Insulation displacement technology for secure and reliable installation
• Metal body unit excellent in shielding applications
Specifications
Pinout
1 2 2 1
4 4
Color Code 3 3
1 White-Orange 3 Orange
A
2 White-Green 4 Green
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 21 - M12 Insulation Displacement Connectors Dimensions
15 (0.60)
20 (0.75)
M12 x 1
15.3 (0.60)
Dia.
Coupling Connector O-Ring Wire Cable Connector
Nut Body Gauge Stop Compression Shell
Ring
Figure A
19.5 19.5
(0.76) M12 x 1 SW13 (0.76) M12 x 1 SW13
Dia. Across flats Dia. Across flats
SW17 SW17
Across flats Across flats
Male Female
Figure B
Specifications
Approximate Dimensions
Dimensions are in mm (in.). Illustrations are not drawn to scale.
Figure 22 - M12 to RJ45 Bulkhead Connector Dimensions
Shielding from housing
over PCB to RJ45
M12 RJ45
1
15 1 2
(0.59) 3
16.5 2
(0.65) 3 100Ω 4
Dia. 15.4 5
4
(0.61) 6
100Ω 7
21.6 (0.85) Panel Cut Out 8
SW 20
Across
Flats
22.1 M16 x
(0.87) 1.5
M12 x 1
28.9 (1.14)
Nut 46.2 (1.82)
‘O’ Ring
Notes:
Product Compatibility and Download Center Get help determining how products interact, check
features and capabilities, and find associated www.rockwellautomation.com/global/support/pcdc.page
(PCDC) firmware.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the
How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, Armor, On-Machine, Rockwell Software, Rockwell Automation, and LISTEN. THINK. SOLVE are trademarks of Rockwell Automation, Inc.
ControlNet, DeviceNet, and EtherNet/IP are trademarks of ODVA, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400